JDBC sender adapter can not get any message

HI~
I have a problem with my JDBC Sender which reads data from a SQL Server. Previously it was working fine but It is not Picking the records from the JDBC table.
I have checked in RWB communication Channel monitoring there no any error or success messages but channel is showing healthy status only(Green).
User's authorization and SQL statement is all right. I checked the SQL in the DB and there are some messages that should be processed.
I also inactive and active the Comunication Channel.
I also checked the LOCKING ADAPTER in Visual Administration is nothing.
BUT the same configuration in DEV system are work perfectly.
I don't want to restart XI,because is PRD system.

Hi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga

Similar Messages

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

Hello Jaded1234,
The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

JMS sender adapter is not picking up message from MQ

Hi Experts,
I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
Any Idea what could be wrong?
Thanks!
Jason
Jason

Hi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss

How to notify in case SQL query(JDBC sender adapter) does not fetch records

hi,
How can we notify(by alerts or something) in case SQL query(JDBC sender adapter) does not fetch records? In channels logs it only says processing started & finished(no message is created for same).
Thanks,
Mayank

Hi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga

TS1398 bought a mini and also have an IPAD2 have used ITunes to download all programs to the mini but have NOT BEEN ABLE TO have the connection to the Internet and CAN NOT get any emails. I NEED HELP!!!!!!!

I thought when I bought a MINI that all I'd need to do is sync up with ITunes to get all apps and setting to the Mini. I was wrong as I can not connnect to the internet and can not get any emails. Have tried just about all suggestions under support but need to reach out to actual users who may have run into similar prblem. I must be missing something as I have to believe that Apple would make it as simple/easy as possible to connect to the interne. I still have my internet connect with my Ipad2.
appreciate any help on this one as MY WIFE is driving me crazy as she wants to use the internet with HER MINI!!!
Thx Wayne

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

On my Iphone 4, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. help?

On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?

Hey there xntricj,
It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
After completing iOS 7 setup, go to Settings > iCloud.
Scroll down and tap Delete Account, then enter your previous Apple ID and password.
If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT1386 I have a brand new Iphone 5, I use Itunes 10.7 I can not get any music on my Iphone,

I have a new Iphone 5
Add a new music cd to the library and then sync music
Also tried manual
TRied on several computers for some hours and evenings
Can not get any music on my Iphone at all
Sometimes I get informed that after copy some are not copied as they have the wrong formet
Also tried with a new CD
No fault during sync, but no music

Good.
Three things come to mind:
1. I think you're implying when you travel away from your home to a more populated area, the cellular coverage improves and your iPhone works well. Is that right?
2. Do you have a case or some other obstruction over or near your iPhone's antenna? Have you tried moving or removing any possible obstructions near the antenna?
3. AT&T has a (free) app in the App Store called "Mark the Spot". You can use this app to report voice and/or data issues to AT&T, as well as keep up on progress they may be making in improving coverage in your area. Your trouble reports are geotagged (if you wish).

JDBC Sender adapter - can VIEW be used in Query statement

Hi,
In JDBC Sender adapter, can we use a VIEW sql query in the "Query SQL Statement" placeholder?
For eg:
CREATE VIEW <view name> as SELECT * from <table name> WHERE <condition>
instead of the usual:
SELECT * from <table name> WHERE <condition>
Thanks,
Vishak

Hi
What exactly is your use of creating a view, if you are going to fetch data from different tables, then you can use the view through stored procedures.
Hope this clears your doubts
Thanks
Saiyog

TS1702 I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any furthe

I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
I have also sent 3 emails to the company if Smart Office 2 with no response.
How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
Zena Parton

I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
I have also sent 3 emails to the company if Smart Office 2 with no response.
How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
Zena Parton

Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

Sign out of the iCloud control panel and then back in.

HT1725 I can not get any app to finish loading from the app store. Anyone else having this problem

I can not get any app to finish loading from the app store. Anyone else having this problem?

Why has nothing been done on this? I still have this problem today on Chrome and on the latest OSX.

My brother gave me his iphone and i activated it with my phone number but i can not receive any message and i notice that on iMessage stills appears his phone number, what do i have to do?

my brother gave me his iphone and i activated it with my phone number but i can not receive any message and i notice that on iMessage stills appears his phone number, what do i have to do?

Launch iTunes on your computer, plug the phone in & on the "Summary Pane", select "Restore". This will restore the phone to factory settings with all of your son's stuff gone. You can now use it as an iPod touch. To do this REQUIRES the deactivated sim card be still installed in the phone.

Hi there. A common question but I can not get any of our iphone/touch/pad to be recognised as a device on itunes on a PC with XP. ANy quick solutions?

Hi there. A common question but I can not get any of our iphone/touch/pad to be recognised as a device on itunes on a PC with XP. ANy quick solutions?

jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing?

JDBC sender adapter can not get any message

Similar Messages

Maybe you are looking for