** JDBC Sender Adapter support custom module ...?

Hi friends,
Does JDBC Sender Adapter support custom module ? If it is how it wil work ?
Kind Regards,
Jeg P.

Hi Kulwinder,
We want to separte the records (1:n) returned by JDBC sender adapter XML. ie. Split/Parse the records in XML and then send to BPM (one by one) instead of whole message . For that purpose, we want to write an adapter module.
Is this possible ?
Kind Regards,
Jeg P.

Similar Messages

CIDX Adapter and Custom Modules

Dear,
We were wondering whether the PI CIDX sender adapter supports the usage
of custom modules ?
We have created a small module which basicaly simply logs a message in
the audit log ... that module works fine with the file adapter ...
When we send a CIDX message from an external system towards PI via the
CIDX adapter then nothing happens ... Traces do not seem to contain any
reference at all towards the module ... It just seems that the module is never called ...
Looking at the adapters/module documentation it somewhere mentions briefly that adapters can choose on whether to implement the standard module chain processor or basicaly do something else ...
Does anyone know whether the CIDX adapter supports the usage of custom modules ?
Thanks,
Steven

Adapter modules cannot be used in CIDX or RNIF sender adapters.
Regards
Stefan
Edited by: Stefan Grube on Jun 24, 2008 3:15 PM

JDBC Sender Adapter

Hi everybody
I have the following error in my JDBC to JDBC scenario; I configured the JDBC sender adapter and receive the following message back. In the Configuration I set Document Name to MT_ScanningStatus:
<?xml version="1.0" encoding="utf-8" ?>
<MT_ScanningStatus>
<row>
<ScannerNb>1</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>2</ScannerNb>
<Status>2</Status>
</row>
<row>
<ScannerNb>3</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>4</ScannerNb>
<Status>2</Status>
</row>
</MT_ScanningStatus>
I defined the corresponding datatype as follow:
DT_ScanningStatus Complex Type
        row              Element 1...unbounded
          ScannerNb      Element 1
          STatus         Element 1
In the following Mapping I tried to Map this structure to the Structure used to send an Update SQL Statement to the JDBC Receiver to update the same table. A normal Test in the Mapping Tool runs fine but when I enter under source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted. Can someone support me? I read the documentation for the JDBC adapter and also a lot of weblogs and discussion threads. Maybe someone knows a weblog describing more detailed the sender adapter and how to handle the incoming Message!!
Thanks in advance Oliver
14:58:03 Start of test
Compilation of MM_JDBC_to_JDBC_test successful
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Root Cause:
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)(:main:, row=1, col=8) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
... 3 more
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)

Hi Oliver,
>>>>source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted.
do this:
in the test tab try your mapping once more
(the correct one)
then save the source xml as file
next compare this saved file with the one
you get from the jdbc sender
>>>>>Declaration not allowed here.(:main:, row:1, col:8)
and compare the first lines in those two XML files
are they the same?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

JDBC sender adapter: Update before mapping

Dear all,
following scenario:
in a database we have a field called "statpi". We pick all messages that have statpi = 0 and
update the data record to statpi = 1 via UPDATE function in JDBC sender adapter.
Every select statement is limited to 100 data records for each message in PI.
But if one data record is wrong and the mapping failed, of course the complete mapping failed.
My problem: The update function of the JDBC sender adapter has already updated the
data records, although they didn't have been send to target system.
What I need is following thing: The adapter should send the messages and after PI has mapped
the message and send it to target system, the UPDATE command should be executed.
In my opinion, this is only possible with BPM, but I am not familiar with Advanced mode in JDBC
sender adapter and "Transaction isolation level". Is there any workaround for this?
Thanks
Regards
Chris

Stefan Grube wrote:>
> What happens, when new values have entered db meanwhile?
The job that change the DB will be fixed on a certain time. We need to configure
Availability Time Planning to be sure, that we start our select at another time.
>
> > In ideal case the data records are still in statpi=0 and get picked up after
> > the database team has fixed the problem and the adapter polls again.
>
> If the flag is not set, the JDBC adapter would poll the same data again and again.
The adapter should poll every hour. Of course we will have some errors before the
support is able to fix this problem, but because of one message each hour this should
not be the main problem.
> - You could do following: pass the values with an error flag, so you can handle this in receiver application,
I am using the function formatNumber for the field that could raised the error. But to chekc if I am able
to do a workaround here and let the target system fix the error sounds like an interessting possibility.
> - Do a split mapping and create a file where you drop any wrong lines
Also interessting. You mean that all "good" record should be mapped to struc1 and the bad one to struc2.
I am thinking of how to determine which record is wrong. Perhaps with an UDF that checks for this special
error.
> - Use XML validation in sender adpter, so the messages are not processed.
You are full of good ideas. I am not using validation yet and the mentioned field is define as string, but that
is changeable. A good possibility to check the new capability of 7.1.
> - use a stored procedure in DB whee you check data quality to send out.
not sure what this is, but I will discuss with DB team.

Can we proceed even if no ResultSet Returned In JDBC Sender Adapter ?

Hi friends ,
                       My scenario is JDBC to RFC . I am reading table using JDBC Sender Adapter and i am passing values to RFC .
                      If my select Query has not returned any row then it won't come to Pipeline right ?
                        What i want is
                      <b> If no rows returned then call one RFC to insert the remarks .
                        If rows found call another RFC to insert the values </b>
                       How can i handle the Situtation ?
                      Expecting your reply asap
Regards.,
V.Rangarajan

Hi Rangarajan,
i answered your question and shown up a solution: If Connection Lost in JDBC or no resultset returned how to handle ?.
Double postings makes it difficult for all involved people to inform theirselfes about the point of discussion.
The polling sender adapter is doing nothing, if no rows selected. So how do want to send a message?
You have to use the JDBC receiver adapter, invoke the message by a job in ERP, for example with a self written RFC or a proxy. You can decide at ERP side, which function module it to be called. Of coz there are other possibilities, for example to put the logic into a business process, but you wont have success with the sender adapter.
Regards,
Udo

How to update two tables in a single call using JDBC Sender adapter

Hello All,
The scenario is, database entries have to be selected from two tables and at the same time those tables have to be udpated with the flag.
We are using JDBC sender adapter and in Select Query, we are fetching the data by joinin the two tables.
Update Statemtent: We can only update one table using this statement.
Is it possible to update two tables using the Update Statement without using Stored Procedures.
Let me know.
Regards,
Sreenivas.

Hi Sreenivas,
> Is it possible to update two tables using the Update Statement without using Stored Procedures.
Yes its possible through join statement
Check this links
Update in JDBC Sender adapter for more than one table
data from 2 tables for jdbc sender adapter
Regards
Ramesh

JDBC Sender Adapter - Records sent one at a time

Hello everyone,
Here's a summary of my scenario JDBC > XI > RFC.
My select statement (JDBC) looks like this:
SELECT * FROM BATCH WHERE STATUS='Y'
The problem is, whenever it returns multiple rows, the RFC can only accept one record at a time (1...1), so I need to pick up the records from the DB and send them one at a time.
Currently, this is how the output XML looks like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</row>
<row>
<number>200000000473</number>
<status>Y</status>
</row>
<row>
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Instead, I need each row to be picked up and sent one at a time.
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000473</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Does anyone know the changes I need to make in my current SELECT statement or the JDBC Sender Adapter to make this possible.
Thanks in advance!
Glenn

Thank you all for your replies. I'll check out your link in a bit, Phani. Thanks!
A SpliByValue won't work since the BAPI Header is (1...1).
Luckily, during testing, I found out that the BAPI (BAPI_PRODORDCONF_CREATE_TT) handles multiple lines in one of the subelements of the header so that was where I mapped the Rows.
I might need to trigger multiple BAPIs in the future, so I'll take a good look at your suggestions, but for now, I'm marking this question answered.
Warm regards,
Glenn

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish

Event Handling in JDBC sender adapter

Hi,
please help me in this scenario.
Scenario is Third Party will update the Header and Item values in to Database table.
Once the update is done , a program will run in Thrid party system and it will update the Event Table with the primary key value of the DB table.
So my JDBC sender should be looking for the event table updation. Whenever there is an update in the event table the JDBC sender should automatically kicked off and it should select all the field in the DB table where the primary key = Event table.primary key and the values will be generated as an Idoc.
1.How will i achive this scenario.
2.How to configure the JDBC sender Adapter which gets triggered automatically when there is an updation in event table.
please advice.
Thanks,
Sujatha

Hi,
>>2.How to configure the JDBC sender Adapter which gets triggered automatically when there is an updation in event table.
There is way to control the Communciation Channel externally. Refer this help document http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/content.htm.
Or alternately you can create a query that always queries only the updated record and configure the JDBC adapter which would periodiocally look the DB...
~SaNv...

JDBC Sender Adapter - No Namespace found

Hello
I am currently using PI 7.1. The scenario is JDBC to ECC ABAP Client Proxy. When the JDBC Sender Adapter sends the data to the Integration Server, the root element does not contain the xmlns attribute. This root element is constructed from the Document Name of the JDBC Sender Adapter attribute.
I am getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_HIS_Material_Consumption_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_Material_</SAP:P3>
<SAP:P4>Consumption_ECC/Material. Values missing in queue~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_HIS_Material_Consumption_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_Material_Consumption_ECC/Material. Values missing in queue~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I perform a test at RWB, the message gets posted successfully. Once posted, the payload of this message contains the xmlns attribute.
Here is the root element from both the instances:
From RWB: <ns0:MT_Material_Consumption_JDBC xmlns:ns0="http://xxx.com/xxx/finance">
From JDBC Adapter: <ns0:MT_Material_Consumption_JDBC>
Could you please let me know, what has to be done to obtain the xmlns in the sender payload?
Thank you in advance.
John Jeyaraj
Edited by: John jeyaraj on Apr 7, 2011 8:22 AM

Hi Hiren
When I test the MM without the xmlns attribute, I get the following error:
The prefix "ns0" for element "ns0:MT_Material_Consumption_JDBC" is not bound.
When I add the xmlns attribute, the mapping is successful.
Thanks
John

How to use sql variables in jdbc send adapter??

Hi,
i wanna use a variable in the sql statement in the jdbc send adapter.
i know i can key sql statement in the "Query SQL Statement" in the jdbc send adapter.but i dont know how to use variables in the sql statement.
i mean, for example, the sql statement is "SELECT * FROM t_student WHERE READFLAG = 0", but now i wanna instead of "0"(the value of the READFLAG) using a variable.
and if i can use a variable to replace the "0"(the value of the READFLAG above sql statement), then how can i send a value to the variable??
request help in the regard.
thx in advance.
Brian

Hi,
Use the place holders to pass the data at runtime. Check the below structure for more details.
Hope this helps.
Thanks and Regards,
Kalpesh
<root>
<stmt>
    <Student action="SQL_QUERY">
      <access> SELECT * FROM t_student WHERE READFLAG = '$FLAG$ </access>
      <key>
        <FLAG>0</FLAG>
      </key>
    </Student>
</stmt>
</root>

PI 7.1 JDBC sender adapter huge load from DB select

Hi,
We have the problem that the JDBC sender adapter is selecting a huge amount of data from a Oracle DB. The Adapter seems to be able to cope the load but when sending to the integration server it causes problems. We found values to adjust but I dont think increasing them is a good solution.
My question is:
Is there any way to send the data in blocks with using the PI standard JDBC adapter ?
Thank you and regards,
Andreas

Hi,
You can use the below parameter in JDBC sender.
   Specify additional Parameter Names and Parameter Values in the table.
Due to messages of large size it may cause issue
Following are the parameters to be set in the table to limit the message size per polling:
●      msgLimit :
●      maxMsgSize : SAP note 1253826.
●      maxRowSize : SAP note 1253826.
Additional parameters are published in SAP Note 801367.
Refer the link.
Defining Additional Parameters in Advanced mode
http://help.sap.com/saphelp_nw73/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm

JDBC Sender Adapter - Transaction & Parameterized Query?

Dear Experts,
I'm curious about the JDBC sender adapter in SAP PI.
As I see from the document and have been searching in the Internet, The default procedure of the sender JDBC adapter is to first run a SELECT/Store Procedure query then update the records that have been read before.
Configuring the Sender JDBC Adapter - Advanced Adapter Engine - SAP Library
What I want to ask is:
- What is the database transaction used for the SELECT and the UPDATE? I mean what if the SELECT is successful and the records have been sent to the IE, but the UPDATE failed. This way, the next polling run, the same records could be read again. Is it possible? Are the SELECT and UPDATE query atomic (if one fails the other fails too)?
- Is it possible to have a parameterized query / stored procedure in sender JDBC adapter? Because seeing at the default procedure, there should be at least a field that will be used as a flag (for example the processed field needs to be updated to '1'). Something like:
          - SELECT * FROM table_a WHERE docno > $last_doc_no
                         $last_doc_no is a paramter or variable from PI
          - EXEC sp_do_something ( $param_a, $param_b )
                         $param_a, $param_b are parameters or variable in PI
Thank you,
Suwandi C.

Hi Suwandi,
all action to database are in one transaction and thats mean if one failed all failed.
And it is possible to have parameterized storied procedure. You sould send something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_proc xmlns:ns0="http://aaaa">
   <statementname>
      <stProc action="EXECUTE"/>
      <TABLE>PROCEDURE NAME</TABLE>
      <access>
         <param_in isInput="1" type="some_type">input param</param_in>
         <param_out isOutput="1" type="some_type"></param_out>
      </access>
   </statementname>
</ns0:mt_proc>

Problem with JDBC Sender adapter

hi guys!
I´ve problem in PI 7.0, with the JDBC Sender Adapter, execute select sentence and update status in Oracle database.
In RWB Message Monitoring and SXMB_MONI I can't see any message.
Someone have any idea how to fix it?
Thanks in advance.

Hi David,
First check on the sender communication channel, if no data has been picked up by PI on channel,
then check the configuration of channel in the ID, especially select query.
If that is ok, then ask the sender application team(oracle database team) to run the query on their side
and to check if they are getting any data.
There could be the possibility of error in data also.
-Supriya.

JDBC Sender adapter - can VIEW be used in Query statement

Hi,
In JDBC Sender adapter, can we use a VIEW sql query in the "Query SQL Statement" placeholder?
For eg:
CREATE VIEW <view name> as SELECT * from <table name> WHERE <condition>
instead of the usual:
SELECT * from <table name> WHERE <condition>
Thanks,
Vishak

Hi
What exactly is your use of creating a view, if you are going to fetch data from different tables, then you can use the view through stored procedures.
Hope this clears your doubts
Thanks
Saiyog

** JDBC Sender Adapter support custom module ...?

Similar Messages

Maybe you are looking for