JDBC Sync - RFC Sync Scenario without BPM

Hi Experts,
I am using JDBC - RFC - JDBC Scnario. The concept is
JDBC is reading data from tables and send data to RFC, after updating RFC is giving response to JDBC to update its tables.
JDBC - RFC - JDBC.
Is it possible to do this scnario without using BPM?
Experts pls advise me.
Regards
Bala

Hello Bala,
These links are useful to you..
JDBC Sender/Receiver adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/jdbcTOJDBC&
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Thanks,
Satya

Similar Messages

Correlation issue in JMS adapter - SYNC/ASYNC scenario without BPM

Hi,
I am working on a SYNC/ASYNC scenario with JMS adapter without using BPM. My scenario is SOAP<>PI>JMS. I configured the interface as below:
1. SOAP Sender channel
2. JMS Receiver Channel writing to Queue A.
 Module used: a. RequestOneWayBean
 b. WaitResponseBean
 Correlation Settings:
 a. Set JMS Correlation ID to "XI Message ID"
 b. Store JMS CorrelationID of request (Checked)
 c. Set JMS Property to "JMS Correlation Id"
 d. Value = "XI MEssage ID"
3. JMS Sender channel reading from queue B ( I am exporting the message from queue A and importing into queue B)
 Module used: a. NotifyResponseBean
 Correlation Settings:
 a. Set XI MEssage Id to "GUID"
 b. Set XI Conversation ID to "Stored JMS COrrelationID of Request"
I can see the cid in the message from queue A. But I observed thhat the header format of the message in Queue A is "MQSTR".
ISSUE:
1. While writing the message to queue A, below adapter log details(part b) concerned me:
 a. Message '8747a7c2-2b06-11df-8055-005056a70ed6' successfully processed by channel
 b. Could not create acknowledgements for message '8747a7c2-2b06-11df-8055-005056a70ed6'
I am not sure why I am receiving the message that " could not create acknowledgements"
2. While reading the message from the sender channel,I consistently get the error message as below:
 a. XI message ID corresponding to JMS message with ID 'ID:414d51205341504449442e514d202020c67b954b20005602'
 will be created as a new GUID with value '21bca916-424f-41f6-3347-c71090392b58'
 b. Error while processing message '21bca916-424f-41f6-3347-c71090392b58'; detailed error description:
 com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
 found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
Below are the blogs which I have already gone through:
1. JMS Synchronous Scenario without BPM - Correlation Settings and Transactional JMS Session
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
2. Note: 1086303
3. Sync / Async Bridge without BPM
In the note, they mentioned something about header being "MQRFH2". BUt in our case, the header is "MSSTR". Not sure whether it makes any difference.
Please help.
Edited by: GP on Mar 9, 2010 4:24 AM

Hi,
detailed error description:
com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
This error would generally arose when there are multiple messages, got stuck in the outbound queue. Try to stop both the sender and receiver JMS comunication channels and clear both the inbound and outbound queues.
Once all the messages in the queue are cleraed, try posting the message again.
Regards,
Swetha.

JDBC to RFC Sync Error

Dear All,
I'm creating JDBC to RFC Sync scenario.
Configured according to below link,
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/12/04/jdbc-to-jdbc-synchronous-scenario-with-rr-beans-and-without-bpm-and-rfc-lookup
Sender JDBC structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_JDBC_To_RFC_Source xmlns:ns0="http://FiletoFile.com">
 <row>
 <A>12</A>
 34
 </row>
</ns0:MT_JDBC_To_RFC_Source>
But in Test tab of MM_REQ is showing Red.
Why its showing red?
PFA the attached Screenshot.
Thanks,
Arthita

Hi Arthitha
You cannot create structure of some kind and use completely different kind of input payload.
If your expected payload is of format
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_JDBC_To_RFC_Source xmlns:ns0="http://FiletoFile.com">
 <row>
 <A>12</A>
 34
 </row>
</ns0:MT_JDBC_To_RFC_Source>
Then your Data type should be created as below
Regards
Osman

RFC to JDBC to RFC sync

Hi all,
Anyone have any link for RFC to JDBC to RFC sync scenario step by step?
(For reverse one means JDBC to RFC to JDBC used RRBEANS configuration in sender jdbc channel and created one receiver JDBC channel.)
What should I do for the same?
Any suggestion?
Thanks,
Arthita

Hi Inaki Vila,
2. Where I need to configure the RRBEANS ? In which channel?
In the RFC sender channel, the first channel to be used. You can check it in the wiki that i mentioned above.
Could you please provide the wiki link for the same?it ll be very helpful.
3. Is it applicable for reverse scenario?
Suppose JDBC is sender and I'm using one RFC. For that also no need to use any bridge (RequestResponseBean) ?
If you want to take the data from DB source and to pass to an ECC system via RFC you wont need any bridge, you can do a normal async scenario JDBC - RFC.
I'm asking for JDBC - RFC sync scenario where I'm using one RFC.
Thanks,
Arthita

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

SOAP to IDoc scenario without BPM

Hi,
I have 2 scenario's
1) IDoc-SOAP - -response -- IDoc scenario -- (have found some links to do it without BPM)
2) SOAP -- RFC request -- RFC response -- e-mail (no links found)
how can i achive both these scenario's without BPM. Currently i have these 2 scenarios in our 7.1 version with BPM. but our requirement is to migrate this scenario into 7.4 without BPM(No PO).
please help us to achive this scenario without BPM.
Your help is highly appreciated.
thanks,
Praveen

Hi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A

Synch-asynch scenario without bpm's?

Synch-asynch scenario without bpmu2019s can any one help me how to configure this scenario without bpms?

hi ferocious,
That is possible with standard functions and standard module beans.
Possiable1:
From pi 7.1 v , sap provided standard functions like RFC and jdbc of the conversion function group.
Possiable2:
sap provided Standard module beans those are RequestResopnceBean and OnewayResponceBean.
thanks,
bhavanisankar.

ASync RFC -- Sync RFC -- SOAP scenario: do I need BPM?

Hi,
I have this scenario. ASync RFC --> PI --> Sync RFC --> PI --> SOAP scenario.
Here are the details.
1. users run async RFC and it will pass data to PI.
2. PI will call Sync RFC with received data and get the data.
3. PI now calls web service with received data from #2.
Do I need BPM to implement this scenario.
Thank you.
-Won

I'm still wondering if it's possible to perform my scenario without using RFC lookup or BPM.
Yes, it is possible.
I want to see if PI supports sequence of calling RFC, JDBC, web service, etc and pass data to
the next call in sequence... without BPM...
Yes, PI supports that. Please make a search on SDN, there are numerous blogs / posts which talks about A/S bridge without BPM.

JDBC to RFC synchronous scenario (Urgent).

Dear forum,
My requirement is data is populated in oracle data base.we are fecthing the data from database through XI and sending it to R/3. RFC is sending the response (suceess/failure) to XI. And XI is updating the status message into database.
For this,I have done the JDBC - RFC - JDBC syncronous scenario using BPM. .I got the successfull message under message monitering.Problem is I cannot able to find the data for RFC and JDBC reciever.
Please find the following Configuration steps for the above scenario
3 data types
JDBC request, JDBC response one dummy structure to capture RFC response messages.
3 message types for the above data types
5 message interfaces.
OB request,
OB ABS request,
IB Asyn for dummy,
Syn ABS (JDBC req and dummy structure),
IB JDBC response.
4 message mappings.
Mapping between JDBC request to JDBC request dummy.
Mapping between JDBC request dummy to RFC request.
Mapping between RFC response to JDBC response dummy.
Mapping between JDBC response dummy to JDBC response.
3 Interface Mappings.
JDBC request to JDBC request dummy.
JDBC request dummy to RFC request and RFC response to JDBC dummy response(Synchronous request and responce) .
JDBC dummy response to JDBC response.
Integration Process.
Used following steps.
Recieve step asynchronous -> Send synchronous -> Send asynchronous
I can able to see the payload for sender under communication channel.But the data is not reached to RFC.can any one help me to come out of this problem.
Points will be awarded for helpfull answers.
Thanks & Regards,
Naresh.K

Hi Seshagiri,
We are trying the same scenario with out using BPM.
Following steps has been done in design(IR).
2 data types for JDBC request & JDBC response.
2 message types for the above data types.
1 outbound synchronous message Interface.
2 message mappings (JDBC request -> RFC request) and (RFC response -> JDBC response)
1 Interface Mapping.
Could you please let me know how to maintain the collaborative profiles & and agreement details in Configuration(ID).
Your valuable assistence is required to complete the interface.
Thanks in advance.
Kind Regards,
Naresh.K

Message Split -- File to Idoc Scenario - ( Without BPM )

I have multiple records coming to XI in a File and I have to create Multiple Idocs to R/3.
Due to Complexity of mapping I'm splitting Maaping step into 2 message Mappings.
A-->B
B-->C
In the 2nd Mapping step I'm doing message Split meaning for each Source record I'm creating multiple Idocs ( To be precise each record on the source becomes 4 idocs in the Target.
2nd Mapping step is as follows
Source 1..1
Sourcerecord 0.. Unbounded
 field1 0..1
 field2 0..1
 filed3 0..1
Target
Message 1
 Idoc 1.. Unbounded
 Idoc Structure..
Message 2
 Idoc 1.. Unbounded
Message 3
 Idoc 1.. Unbounded
Message 4
 Idoc 1.. Unbounded
So based on some criteria each record of Source will be mapped to 4 Messages ( 1 each under each Message )
Is it possible to do this without BPM?. Iam sending all these Idocs to same R/3 System.
Thanks for any help..RK

Hi,
See the blog
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Basicly we have 2 ways of handling such scenarios:
- we can use a block step and send multiple IDOCs from our BPM
- we can also do a little trick and send multiple IDOCs from the XI without a BPM
The first approach is a standard XI approach. It involves the use of a BPM
so the speed of this transfer many not be very good in case you'd like to send
hundreds or thousands of IDOCs in just one call.
The second approach uses a little trick that was mentioned several times
on the XI Froum by a number of XI developers but is still not very clear to the XI newbies.
It allows us to send multiple IDOCs without the use of a BPM. Most probably this will be your choice
if you'd like to use such 1:N (IDOCs) scenarios effectively.
Please see the bwlow threads also..
IDOC Splitting
File To IDOC Thru XI
Multi-Mappings in BPM (XI 3.0)
Please let me know , your prob..is solcev or not..
Regards
Chilla..

Two mappings in one scenario without bpm

Hi,
I am using two different mappings.
Output of one mapping is acting as an input for other mapping i.e source message for second mapping.
Is it possible to do this scenario without using bpm?

hi,
have a look how it works from my weblog:
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
you can use any mapping but you need to
be aware how to input and output structures look like:
https://weblogs.sdn.sap.com/weblogs/images/34500/1_xslt_pierwszy.JPG
BTW
target structure is only checked if you use
graphical mapping
if you use abap or java mappings your target structure
will not be checked (if it's valid) as it is with
graphical mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Multiple IDOC to Multiple IDOC scenario without BPM steps????

Hi
Could you please give me the solution for this ???
I want steps for sending all IDOCs at a time- ---"Multiple IDOC to Multiple IDOC scenario without using BPM".???
thanks
3nadh

Hello,
Refer the below, for certain details!
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi ALE configuration for pushing idocs from SAP to XI
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change XI: IDOC bundling - the "trick" with the occurance change
Regards,
Jilan

IDOC to WS Synchronous Scenario Without BPM

Hi Experts,
I am dealing with Idoc to WS synchronous scenario. Can this be done without BPM??
ALEAUD can make IDOC to handle WS response??
Please suggest.
Regards,
Sushama

Please suggest since BPM involves performance issue
BPM surely has performance issue...only when there are a lot of steps/ logic implemented in it and when the processing load is too much for the XI/ PI server to handle.
The BPM design in your case will be just of following steps: Receive --> SyncSend --> AsyncSend .... excluding Transformation...and a BPM with these steps wont cause a big harm to processing of other messages.
Regards,
Abhishek.

How to capture SOAPFault in an Async/Sync Scenario without BPM

Hello friends,
My scenario is ECC (async) to SOAP (sync) and back to ECC (async = ALEAUD). I'm using aync/sync bridge is receiver SOAP adapter.
My scenario works fine with a normal response but when I get a SOAPFault as a response I get the following error in de receiver SOAP adapter:
Message processing failed. Cause:
com.sap.engine.interfaces.messaging.api.exception.ConfigException: No sender agreement configured that matches the message's header fields (sender party: "", sender service: "NONSAP", interface: "urn:test, SII_Test_Sync", receiver party: "", receiver service: "BS_ECC")
The configuration of my receiver SOAP adapter looks like this:
Did I use parameters interfaceOnFault and interfaceNamespaceOnFault correctly?
Your help is greatly appreciated,
Kind regards,
John

Hi Nilesh,
sorry for the delay. What I found every time i used the option "DO NOT use SOAP envelope is checked" is that the envelope is removed from request and response/fault messages as well. To solve those kind of errors I developed a module called ReplaceString. What this module does is to replace a string with another one passed as parameter. What do I archive with this? Well I sometimes use this module to include some parts in the xml message before it gets in PI. For example, lets say you receive something like this:
<FaultMessage>
<standard>
 <faultText>
 <faultUrl>
 <faultDetail>
 <severity>High</severity>
 <text>This is an error</text>
 <url></url>
 <id></id>
 </faultDetail>
</standard>
</FaultMessage>
and you are expecting something like this:
<soap:Envelope
xmlns:soap="http://www.w3.org/2001/12/soap-envelope"
soap:encodingStyle="http://www.w3.org/2001/12/soap-encoding">
<FaultMessage>
<standard>
 <faultText>
 <faultUrl>
 <faultDetail>
 <severity>High</severity>
 <text>This is an error</text>
 <url></url>
 <id></id>
 </faultDetail>
</standard>
</FaultMessage>
</soap:Envelope>
You could use this module to replace the following strings:
<FaultMessage>
by
<soap:Envelope
xmlns:soap="http://www.w3.org/2001/12/soap-envelope"
soap:encodingStyle="http://www.w3.org/2001/12/soap-encoding"><FaultMessage>
And
</FaultMessage>
by
</FaultMessage></soap:Envelope>
If you find it useful, I can paste the code of the module here.
Regards!

JDBC Sync - RFC Sync Scenario without BPM

Similar Messages

Maybe you are looking for