Jdbc to abap prox in AAE is possible?

Hi
i am using PI7.1 EHP1
the following patern ,, in AAE is possible?
1. jdbc to abap proxy ?
2. abap proxy to jdbc?
i will be highly appreciated in advance if you help me
thanks
venjamin

Hi,
I am not 100% sure about this,but few days i found one article it was talking about how to implement AAE for ABAP Proxy scenarios.i think we can implement .
check below link
ABAP Proxy sender possible in integrated configuration AAE with PI 7.11
Regards,
Raj

Similar Messages

Set/change dynamic header configuration from ABAP Proxies

This question is with reference to Async ABAP Proxies.
Is it possible to set or change dynamic configuration header of an outbound (client) proxy, from within an inbound (server) proxy ? If it is, how do I do it?
Can someone please advise?
Thanks,
Badari

I am sorry to have to say, that this is not possible.
Regards
Stefan

XI content certification - ABAP proxies possible?

Hi,
can we use ABAP proxies in XI content certification ?
I mean develop an ABAP proxy in IR that will be generated in ERP
and just supply the code for it ?
BTW
I've tried asking on :
Process Integration (PI) & SOA Middleware
but with little success
I also tried contacting SAP ICC (both EU and Americas)
but I got no response
thank you,
Regards,
michal

Hi John,
Exactly what I needed to know
thanks
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Help on ABAP Proxies.

I Dont know wat is Proxy,
Can Any one Expalin me ABAP Proxy.
My Queries are,
1) How to create an ABAP proxy.
2)Is the Message Mapping Require of ABAP Proxy.
3) Wat are the Sender and Receiver adapters we have to use.
Points will be awarded for the good approch to that scenario.
Regards,
Jayasimha Jangam
[email protected]

hi
Proxies communicate with the XI server by means of native SOAP calls over HTTP .RFC does not, so you have to convert from SOAP to RFC calls and vice versa. So XML conversion is required.
ABAP Proxies uses Webservice and Http Protocols. And if you use RFC it is mainly meant for Sync. call. But Proxies is used for both Sync and Async.
If you use ABAP Proxy , you can reduce the overhead calling the function again and again.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Re: JDBC Sender select/update problem
If u generate proxy for outbound interface then its client proxy and for inbound interface its server proxy.
In client proxy u can call the method to send messages but u can't modify it but in server proxy its possible to write a user code within the method to execute proxy.
CLIENT PROXY:
A WSDL description from a UDDI server (or an Internet page) is usually used to make a service executable in the Internet and to describe the interface of this service. You require a client proxy and not a server proxy to call this service by using the Web service infrastructure.
SERVER PROXY:
You can only generate ABAP server proxies from a WSDL description if they originate in the Integration Repository.You can also generate server proxies for Java and client proxies for ABAP from message interfaces.
s refer these doc about ABAP proxy ..
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Re: JDBC Sender select/update problem
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
/message/266750#266750 [original link is broken]
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
http://help.sap.com/saphelp_nw70/helpdata/en/2e/278a8363b5ac4483dc1efc382e51df/frameset.htm
Check out this blog....
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cbc7d790-0201-0010-bea6-c549902e93e2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
cheers
kish
reward if found useful

Direct Connection ABAP Proxy and Java Proxy possible ????

Hi Folks ,
As i read as direct connection possible between 2 SAP systems only ..
and also i read as WS Direct Connection u2013 (Java) ..
What it means ?? is it ABAP Proxy to Java Proxy using Direct connection ?? Like Java Client Proxy and ABAP Server proxy
I am not clear on this.. Could you please explain or help me on this . ??
Siva..

Hi ,
+You can do both for java proxies as well Abap proxies.+
As per the following points
1. Point-to-point connection is a new capability available with SAP NW PI 7.1. It allows applications or systems to send messages using WS-RM without going through a middleware, e.g. PI, but still using a centralized tool to design and
configure the interfaces and connection properties.
2. SAP XI 3.0/PI 7.00 or higher releases can be licensed based on the total volume of messages in
gigabytes (GB) that is processed per month. The size of the payload is determined in the integration
server. The information is then aggregated according to sender and receiver system.
Question :
1. If Message exchange between 2 SAP applications using direct connection .. Then dont we need to consider about licencing cost for volume of messages per month ?
2. So if i use ABAP Client Proxy to Java Server proxy scenario.. can i use direct connection ? Eg., SAP ECC to java application ?
In both the cases PI Runtime is not required .. Am i right ?
Please clarify..
Siva..

JDBC and ABAP proxy

Hello guys , need help with the following scenario :
ZTable as sender through Xi to db. i have never worked on this type before . Need some help in any blogs or scenarios dealing with the same . Interfacing ztable through a abap proxy.
I am also confused on the concept of client and server proxy . Please suggest
Krishnah

Hi Krishna,

CLIENT PROXY:
A WSDL description from a UDDI server (or an Internet page) is usually used to make a service executable in the Internet and to describe the interface of this service. You require a client proxy and not a server proxy to call this service by using the Web service infrastructure.
SERVER PROXY:
You can only generate ABAP server proxies from a WSDL description if they originate in the Integration Repository.You can also generate server proxies for Java and client proxies for ABAP from message interfaces.
To Know more about Client and Server Proxy Please go through these links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm">Proxy Generation</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/62/8a5f3c31727d59e10000000a114084/content.htm">Implementing a Server Proxy</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/9b/821140d72dc442e10000000a1550b0/content.htm">Data Transfer Using SAP XI</a>
Also look at these Blogs which explain in detail about the Proxies.
<a href="/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy Proxy</a>
<a href="/people/siva.maranani/blog/2005/04/03/abap-server-proxies Proxies</a>
This pdf should help you...It talks about implementing the various JDBC scenarios:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b">Step-By-Step Approach for Implementing XI Scenarios</a>
To configure your JDBC adapter you can navigater thru this link:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm">JDBC Adapter</a>
Configuring sender JDBC adapter:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">Configuring the Sender JDBC Adapter</a>
Configuring receiver JDBC adapter:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm">Configuring the Receiver JDBC Adapter</a>
This weblog deals with a complete JDBC scenario and is ideal for beginners:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Regards,
abhy

I want to test sender ABAP proxy in AAE by SOAP client

To PI Specialists
Now I plan to test sender ABAP proxy in AAE by SOAP client system.
(we use aae so we set sender abap proxy by sender soap adapter.)
ABAP creating team and PI creating team are in other site.We cant contact easily.
I want to separate ABAP Unit test and PI Unit test, plan to use soap client for test driver.
(we use SOAPUI. )
the url is http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=party:service:channel
I noticed that sender soap adapter is started, but the messeage protocol is invalid.
we use messege of wsdl. it must be XI3.0 protocol.
Please tell me XI3.0 protocol.
Naoki

This is possible to do in SOAPUI. I am testing this scenario using AAE, but I am also using SOAP UI Pro. The procedure is pretty basic. Instead of sending your payload in as part of the body, you have to send it in as an attachment. You will also need to set the header correctly. Here is a sample message from my SOAP UI tests that may help. The only thing you need to do differently is load the attachment, name it, and make sure that the name of the attachment is reflected in the SAP:Payload attribute. Also, I am using a Groovy script to create a GUID.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
<soapenv:Header>
<SAP:Main versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
 <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
 <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
 <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
 <SAP:TimeSent>${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}</SAP:TimeSent>
 <SAP:Sender>
 <SAP:Service>SVCNM</SAP:Service>
 </SAP:Sender>
 <SAP:Interface namespace="Interface_Namehttp://namespace.com">Interface_Name</SAP:Interface>
</SAP:Main>
<SAP:ReliableMessaging SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
<SAP:System SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SAP:Record namespace="http://www.sap.com/webas/712/soap/features/runtime/metering/" name="CallingType">SA</SAP:Record>
</SAP:System>
<SAP:Diagnostic SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SAP:TraceLevel>Information</SAP:TraceLevel>
 <SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
<SAP:HopList SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SAP:Hop timeStamp="${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}" wasRead="false">
 <SAP:Engine type="BS">SVCNM</SAP:Engine>
 <SAP:Adapter namespace="XIhttp://sap.com/xi/XI/System">XI</SAP:Adapter>
 <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
 <SAP:Info>3.0</SAP:Info>
 </SAP:Hop>
</SAP:HopList>
</soapenv:Header>
<soapenv:Body>
<SAP:Manifest wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink"
 xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
 <SAP:Payload xlink:href="cid:TestPayload.xml">
 <SAP:Name>MainDocument</SAP:Name>
 <SAP:Description/>
 <SAP:Type>Application</SAP:Type>
 </SAP:Payload>
</SAP:Manifest>
</soapenv:Body>
</soapenv:Envelope>
Here is a picture of my SOAP UI project in case it help the understanding.

Alerts for ABAP proxies?

Hi,
I have implemented alert monitoring on XI and it works fine. I want to use this alerting system also for ABAP proxies - so if an error occurs, I want to create an alert. Is this possible? How?
Thank you,
Olian

Hi Olian Saludew ,
Alerting is an function of Runtime Workbench along with Message archiving,End-to-end monitoring, Performance Monitoring,Cache monitoring.
Alerting is no longer dependent on the configuration and activation of end-to-end monitoring. Consequently, the delay between when an error occurs in message processing and the creation of an alert is significantly reduced. Furthermore, you no longer need to schedule the report XMSALERT_PROCESS_DATA_GET as a
background job.The Runtime Workbench has CCMS Alert Monitor thru which You can now configure one new CCMS Alert Monitor per Adapter Engine for adapter-specific processing errors.Alerts triggered by the Runtime Workbench can now be forwarded to the CCMS Alert Monitor and displayed there.
See also SAP Note 824039.
Thru Runtime Workbench we can access alert inbox, alert configuration In process Integration with Central SAP Monitoring Infrastructure we Drill down to individual process steps and Use SAP Web AS Alert Framework.
In SAP Web AS Alert Framework, we Classify errors and Alert channels (such as e-mail) available.
Alert-Configuration
Objective: Active Monitoring
CCMS Alerts + message-oriented alerts
Based on SAPu2019s Basis Alert Framework
Alerts propagated through E-Mail, SMS,
In Monitoring the SAP Exchange Infrastructure, Message Alerting is part of Runtime Workbench.
Alerting Framework
Configuration of alerts to reflect the needs of specific processes
Part of SAP Web AS
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Custom Alerts in CIC Win Client for CRM 5.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601db2b2-2839-2a10-0381-8807979f6ff8
Understanding u'r SAP EarlyWatch Alert Report
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Can we hide ABAP proxies?

HI Experts,
We have a scenario in which data is transferred from PI to BI and vice versa.
The communication is done via ABAP proxies as far as the documentation goes.
But I dont see the proxies generated in SPROXY. The system is running absolutely fine.
My question is, is it possible to hide business systems, proxies etc in PI 7.0?
If yes, how do we go about to find them.
Regards.

Hi,
We will always creatre Proxies in the application system. So please check your proxy in your BI system. We cannot hide the intereface either in ABAP or JAVA, but you can restrict access to the interface. If you see the interface in IR and ID and you cannot access then you may not have sufficient authorizations. So please check that.
Somtimes when you create the objects and if you dont add to a configuration scenario then you may not see under standard configuration scenario. In that case go to the objects tab and see each one inidividually.
Regards,
---Satish

Problem in creation of ABAP proxies

Hi,
I am trying to create proxies of Message Interfaces that are built from External Definitions(XSDs). In the scenario, we use two XSDs, one for structure of BAPI and one as Document Envelope containing header level information of the document. Message Interface is created for Document Envelope and internally it references XSD of structure of BAPI.
For e.g. For request message of BAPI_COMPANY_GETDETAIL, we have two XSDs:
1. BAPI_COMPANY_GETDETAIL
2. BAPI_COMPANY_GETDETAIL_Document_Envelope
I create interface for document envelope; interface internally references XSD BAPI_COMPANY_GETDETAIL.
When I try to create proxy for such an Interface I get following error:
Cannot generate proxy (object <element name="BAPI_ACC_DOCUMENT_POST"> missing in WSDL, see long text)
Message no. SPRX084
and diagnosis provided in long text is as follows:
Diagnosis
In the WSDL document, the object
 "<element name="Documents"> <complex/simpleType ..."
from the namespace
"http://mindef.nl/schemas/DocumentEnvelope"
links to the object
 "<element name="BAPI_ACC_DOCUMENT_POST">"
from the namespace
 "urn:sap-com:document:sap:rfc:functions"
However, this last object does not exist in the WSDL document.
System Response
ABAP proxy generation expects that all directly and indirectly referenced objects are in the WSDL document. Therefore, no proxy can be generated for this WSDL and the system displays an error message.
Procedure
This situation can have different causes:
Object "<element name="BAPI_ACC_DOCUMENT_POST">" not been defined
Object "<element name="BAPI_ACC_DOCUMENT_POST">" saved in the wrong namespace
In the reference to object "<element name="BAPI_ACC_DOCUMENT_POST">", the wrong name was specified
In the reference to object "<element name="BAPI_ACC_DOCUMENT_POST">", the wrong namespace "urn:sap-com:document:sap:rfc:functions" was specified
Internal error in the service that constructs the WSDL document
Internal error in ABAP proxy generation
I have checked all the possibilities, there is no inconsistency in WSDL.
Kindly provide some suggestions to tackle this problem.
regards,
Bhavish Bhatia

Hi Bhatia,
You cannot create ABAP proxies from external definitions, IDOC or BAPI, when your application system is based on 6.20.
This works only, when your application system is based on 6.40 or higher.
Regards,
Udo

New Data in R/3 Enterprise - ABAP Proxies - XI what happen?

Hi,
i have a theoretical question:
if i use R/3 Enterprise on WAS and put new Data in the R/3 System and transport them to XI with ABAP Proxies. What happens in the systems?
How do the R/3 System put new data in the proxy runtime and send them to xi?
I want to unterstand how the transport from new data in a R/3 System with ABAP Proxies comes to the XI Integration Server.

Hi Marcel,
>>>>>How do the R/3 System put new data in the proxy runtime and send them to xi?
all you need to do in r3 is to fill tables of a generated structure
and execute one method of a generated class (send....)
then R3 will connect over HTTP to XI and send the data from your structures
structures and class in R3 is being generated automatically via TCODE SPROXY
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Problem with ABAP proxies - HTTP connection to R/3 is not working

Hi guys!
I'm setting up a connection from XI to R/3 , because I'm using proxy objects. Our DEV is working fine. Now I have moved the objects to QA and since the HTTP connection is not there, I need to set it up.
I have created a service user on R/3, activated ICF service on R/3 and created a HTTP to abap type connection in XI. When I test the connection I get a new logon screen. Why? I have provided information about logon user, client, ....
Thank you! Olian

Hi,
this logon screen populated when the RFC User ID is locaked. ask your basis team to release it.
also refer below links if in case of any other problem
Actiave ABAP Proxies -- /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Setting Up Point-to-Point Connections with proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Thanks
Swarup

Error while usinjg the JDBC to ABAP Proxy Scenario

Hello Rocks,
This is my scenario like JDBC --- Pi --- ABAP Proxy
while i am given a sender side jdbc XSD structure is like this
VWENTITYAGGREMENT
Row             1-unbound occurence
      POOL_ID   0-1 occurence
      CUST_ID
      AGREEMENT
       PRODUCT_ID
        CONTRACT_TYPE
        CONTRACT_TYPE_DESCR
        AGRMNT_STATUS
        STATUS_DESCR
          EFFDT
         TERMINATION_DT
         ADD_DT
         ADD_TM
while i am writing a select query in Sender JDBC CC is like this
SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement.
Here i am getting this Error message like this :
Error Description: Database-level error reported by JDBC driver while executing statement 'SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
So please give me your valuable inputs !
Regards,
Ravi.

Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
Did you confirmed the name POOL_ID as suggested?
Why is the tablename different (check the case) in the query that you make and in the XSD structure that you mentioned......check if this is causing the problem.
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 4, 2010 10:24 AM

Problem in activating the ABAP proxies

Hi Experts,
    I was following the url below, on how to activate ABAP proxies, How do you activate ABAP Proxies?
and I came across certain issues.
I hav made the HTTP connection in R/3 as per the blog and as well as the TCP/IP conections in R/3 keeping in mind the program ID from XI dev server -> sm59 -> LCRSAPRFC and SAPSLDAPI_XID, and in both the TCP/IP connections that I made in R/3 I have applied the Gate way host and Gate way service of the XI development server.
Then I tried the connection testing in R/3 TCP/IP connections - LCRSAPRFC and SAPSLDAPI, and both worked successfully.
Now when I went to SPROXY, of R/3 in order to see my components and nane spaces, [that I have made in the XI dev server[ , to craete my PROXY, I could ONLY find the
SAP ABA
SAP APPL
SAP BASIS
SAP HR.
There are some more standard components and custom software components, in XI DEV server that I cant see.
I hav developed several mname spaces in the XI dev server, that I expected to get reflected in the R/3.
Where am I going wrong? What is the mistake I am doing??
Points will be awarded.
Arnab

Hi Anirban,
    u must tell me, the status, from the below output from SLDCHECK
Exchange Infrastructure: Test LCR Connection
RFC ping was successful
SLD server access settings:
host name:   demoretail
port number: 50000
user       : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD s
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy ru
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code     4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id:      LCRSAPRFC_RXD
gateway host:
172.26.5.12
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly

How can we post data from CRM to SAP using ABAP proxies???

Hi ,
Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
Thanks in advance
Andy

Andy,
Please look at these weblogs.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
These should give a good idea about implementing Proxies.
Regards,
Ravi

Jdbc to abap prox in AAE is possible?

Similar Messages

Maybe you are looking for