JDBC to IDOC Error

Hi Guys
On my Scenario Jdbc to Idoc (Asynch) I am using FLCUSTOMER_CREATEFROMDATA.FLCUSTOMER_CREATEFROMDATA01
as a Receiver Interface, now when testing on the sxmb_moni I get two flags the Black and While and the Red the one the is Back and While shows that the Sender is my JDBC Adapter which is right
but now the Red flag show that the Sender is IDoc(FLCUSTOMER_CREATEFROMDATA.FLCUSTOMER_CREATEFROMDATA01) is also Sender of which I used it as a Receiver Interface, I dont know how to stop this IDoc Adapter not to send but to receiver.
Basical my scenario is meant to create an IDoc but is is not doing it when going to TCode WE02/WE05 I get message : "No IDocs selected"
Thanks
Yonela

Hi
I don't have any conditions, to Send and Receive, by the way I went to TCode IDX5 my Outbnd is right but Inbound thats where I get the below error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error
I have done these:
SM59- To Create RFC Destinations
WE21- To Create IDoc Ports
SALE- To Create Logical System
WE20- To Create Partner Profiles
IDX1- Port Maintenance in IDoc Adapter
IDX2- Metadata Overview for IDoc
On the ID I created the the IDoc Receiver:
RFC Destinatin: IDOC_RECEIVER
Interface Version: SAP Release 4.0 or Higher
Port: SAPPI1
SAP Release: 701
What could be the problem
Thanks,
Yonela

Similar Messages

JDBC to IDoc ( error when mapping multiple JDBC records to IDoc)

Hi,
I am working on JDBC to IDoc scenario, I have declared row as 0 to unbounded and by default the IDoc structure is 1..1.
Inorder to map multiple rows from JDBC to get multiple IDoc's, I have changed the occurrence of IDoc in "Messages" tab of Message mapping to 0 to unbounded.
I have mapped "row" to "IDoc".
When I test the mapping, it works fine, giving the same number of IDoc's with that of row.
When I test end to end, in SXMB_MONI, it gives me following error:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>MSGGUID 54A3A64E895D48EC3F20C69FEFE2E82B: Tag found instead of tag IDOC BEGIN=</SAP:P1>
can any one help me out with this.
Thanks in advance.

Hi Jwalith,
Check this blog from Michel
The specified item was not found.
Make sure that you changed occurance as per this blog.
hope this is helpful
regards,
Venkat.

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

JDBC - XI - IDOC scenario, SM58 error

I am trying to set up a scenario with JDBC -> XI-> IDOC. I seem to get the data, but when I look at it in SXMB_MONI, I get the checkered flag, for the overall status, but a red flag for the outbound status. This led me to SM58 where I see this error "No authorization to send IDocs with message type Z...". It shows the caller ID as being XIAFUSER (which is different from the ID I have created on the receiving SAP system) and is in function module IDOC_INBOUND_ASYNCHRONOUS. On XI, I have the RFC (SM59) and Port (IDX1) setup for the receiving SAP system. The receiving system has an ID setup (used in the RFC on XI), has a partner profile, port, logical system, and a RFC to XI setup.
Any ideas on where to track this down? I tried giving XIAFUSER sap_all, and it still fails and this ID does not exist on the receiving system.

HI,
Just to inform you that, if any SM58 error, mainly because of IDX1 entry and RFC destination .
So that;s the reason , i just suggested to check this SAP note.
Now you have given SAP_ALL access to test right ? Even you can check with this SAP note-837595
Also check that SM59 (RFC destination) in XI system uses any User ID ? DO not select CURRENT USER option here.. and check it
Regards,
Moorthy

JDBC to Idoc Mapping error

Hi all,
i need help for my JDBC to IDoc-scenario.
I Select some data from the db and everything is fine.
Before the mapping I can see all in the payload, but after mapping only the constants were mapped.
Hope someone can help me.
Regards,
Jörg

Hi ,
Please provide the mapping details in src mode.
Please check these points -
1) each row of the DB is set to one recursive segment of IDOC .
2)Check wether you have set all the Mandatory fields of IDOC .
Test the mapping in test Tab of mappiung using payload message in MONI ...
Regards,
Nanda

JDBC to IDoc (Custom inbound function module)

Hi,
In my scenario JDBC to IDoc, I am using a custom function module to change the planned order. When I exectue the function module in WE19, it works fine and the IDoc status is also updated correctly.
But when I execute the entire interface right from JDBC, the status of the IDoc is set to 51 and the description it is giving is "No status record was passed to ALE by the application".
Can any one help me with this, where exactly is the error?

For IDOC status 51 : Inbound IDOC
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...

IDoc to JDBC and JDBC to IDoc Scenario

Dear All,
I am working on IDoc to JDBC and JDBC to IDoc Scenario.
I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
Does anyone have completed STEP by STEP scenario document for this?
How my Idoc will sent to XI?
How XI will pick up data from IDoc?
How XI will Convert data to JDBC and UPDATE in Oracle Database?
And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
Where and When i can watch my process and data?
How can i test the whole integration?
I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE it gives me error
"Unable to refresh cache "NO_BUSINESS_SYSTEM"
"Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
Please solve all the above problems i will reward u points
thanks,
RP

Hi,
While we working on IDOC to JDBC interface..
We have to deploy JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Idoc Reveiver adapter..
http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Thanks,
Satya Kumar
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM

JDBC to iDOC (DEBMAS) for create and change.

Hi all,
I have this problem...
my Scenario: JDBC(MultiBase) -> iDoc (Debmas06).
with iDoc DEBMAS06, i'm creating customers...
but the POS can send the same customer again...
XI process it but... show an error... because, the STCD1 is already created...
so i'm thinking use one interface with the iDoc and a BAPI(BAPI_CUSTOMER_CHANGEFROMDATA1) for this purpose...
but somebody told me (in SDN) than with debmas I can change a customer... but I can't find information about how to do it... everybody talk about.. the change in SAP and then send it to POS... but... in the other way????
any help, any info??
thanks a lot.
Regards

> if you change customer with IDOC do you use the same sales tax as
> the customer already has? and then you have this error ?
yes, I'm using the same Sales Tax... and when see in trx WE02 the iDoc, it say's: "
No batch input data for screen SAPLID_TAXNUM 1000"
SAP give this error only when I use two times the same STCD1.
so i assume, than can't use the iDoc for change an unique customer...
but may be I'm wrong and this error, tell me another thing.. i don't know.
> if not did you try leaving this field empty? as BAPI cannot change it anyway...
but thinking logically how the iDoc will find the customer than I want to change??????
may be I have to use my look up.. ask if the customer "XXXX" exists, and if it is true, don't use the STCD1 and use the KUNNR ?????????
Thanks

JDBC to IDOC

Hi All,
i am working on JDBC to IDOC scenario an error is occuring in SXMB_MONI and this is the error.
Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with ISMS_WCD1 I::000 FM NLS_GET_LANGU_CP_TAB

Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with ISMS_WCD1 I::000 FM NLS_GET_LANGU_CP_TAB
there is a SAP Note for this problem....check it here: https://service.sap.com/sap/support/notes/816556
Regards,
Abhishek.

For Michal Krawczyk - JDBC to IDoc Scenario

Hi Michal,
I am trying to run JDBC to IDoc scenario and somehow my mapping is not getting executed and because of that at receiver side IDoc is not getting LIFNR value which should come from Database table and as a result i am getting error 51 on posting the IDoc...
Mr Reddy suggested me to go through your blog i.e
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
After going through this blog i figured out that when i am trying to check the mapping as per way mentioned in the blog i am receiving the error "java.lang.NullPointerException"..But i am getting this error even for those scenarios also which are working fine on checking the mapping suggested by you.
Can you suggest something...
It would be better for you to understand my scenario if you will go through this thread also :
https://www.sdn.sap.com/irj/sdn/forums

hi Santosh,
1. this is not a private forum - post to everyone so everyone will be have a look - this way you will get more answers
2. if you want my direct help contact me by e-mail and I will contact you with my team leader and I will repair your XI problem then
thanks for understanding
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Deleting data from a table(JDBC to IDOC scenario).

Hi,
For JDBC to IDOC scenario, the requirement is as explained below:
1: There are 2 tables-> GDDB and CHANGES
2: Poll the CHANGES table every 30 mins everyday.
3: a)Publish the records for which the 'published' flag status is 'N'
b)Update the status as 'Y' after publishing.
4: On the first day of every month, delete the records from the CHANGES table if the record is 3 months old and 'published' status is 'Y'
I would like to know how update and delete can be done using one JDBC adapter?
Regards,
Vishal.P.Kulkarni

Hi,
update:
there is a field in the sender jdbc adapter - SQL statement for update - put it there
delete - On the first day of every mont
create a job on the database which will trigger the delete statement
it does not/ should not have to be done with XI
Regards,
Michal Krawczyk

JDBC to IDOC Scenario

Hi Experts,
I have tried JDBC to IDOC Scenario but it is giving No Segments Found Exception. I don't know where I am doing the mistake.
can any body please send me a pdf document for JDBC TO IDOC Scenario with step by step procedure from scratch (including creation of LS,LI etc)
Thanks in Advance,
Murthy

Hi Murthy
The steps are pretty much the same as any other scenario with some exceptions
1: You import the IDOC structure from the R/3 System. This acts as the DT, MT and MI.
You also need to do some configurations on the ABAP Stacks of sender and XI system.
Sender:
WE20 Partner Profiles
SM59 RFC Destination
XI:
SM59 RFC Destination
IDX1 Ports
IDX2 This is the metadata repository so you wont necessarily need this.
Also because you IDOCs can be sent directly to the ABAP stack/Integration Server you do not need a sender comm channel or sender agreement.
The rest is pretty much as any other scenario.
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Cheers..
Vasu
** Reward Points if found useful **

IDoc error In case of ERS procedure, please enter terms of payment

Hi,
I tried to use BAPI_PO_CREATE1 to post purchase order. However, I encountered this error.
IDoc error In case of ERS procedure, please enter terms of payment
I passed the payment term in IDOC PORDCH. Segment E1BPMEPOHEADER-PMTTRMS has value filled out. This value is passed into the BAPI correctly but for some reasons, it got cleared out in the BAPI. Any ideas or suggestions would be greatly appreciated.
Thanks

Check
BAPI_PO_CREATE1 - E 06 436 In case of account assignment

JDBC to Idoc scenario - change of logical system name

Hi,
I have a JDBC to idoc scenario that worked. Now i had to change the logical system name from my sender system from ABC_123 into ABC123 in the SLD (Business System - Integration - Logical System name). I did so and also refreshed my Cache.
Afterwards I started the process, but it failed in the Receiver system. The idoc is correct expect of the partner name. My receiver system expect ABC123 - as I changed in the SLD - but PI send ABC_123.
If io look in SXI_CACHE - Services my Business System still got the "old" name (ABC_123).
Did i miss something resp. how can i load the current configuration from SLD?
Thanks in advance
Michael

Hi Michael,
Again Import the changed logical system in the Integration directory of you PI system.
And check the scenario (Sender Agreement, Receiver agreement ) what system they are reflecting.
If they are showing old system then you have to replace the business system in all the scenario.
Edited by: Rajhans Abhay on Jan 7, 2010 3:14 PM

IDoc Errors in ECC

Hi Experts,
what kind of IDoc Errors can occur in ECC for the scenario :
ECC sending PO to Ariba(E-commerce hub, using third party adapter) and in receiving back Order confirmation from it.
Thank you,
MK

Hi,
This depends on the design and landscape and also Disaster Recovery or High Availability Plan.
some hints:
1. Connection Problem: Because of timeout , unavailability of the Receiver system.
2. Data Problem may cause you the error in IDoC posting [ probably functional/Business Team should look into this]
3. User ID and Password Maintenance - it may hit sometimes
4. If any pre-requisite process is required to process this IDoC, then problem in the pre-requisite process will lead the problem
these all kind of problems you may face..
Rgds , Moorthy

JDBC to IDOC Error

Similar Messages

Maybe you are looking for