JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC
Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar
HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..
Similar Messages
-
Looking data from more than one table and inserting into another.
Hello,
I am giving you the Table structures as per my requirement..
CREATE TABLE TEMP_A
(NAME VARCHAR2(100) primary key);
CREATE TABLE TEMP_B
(STRUCTURE VARCHAR2(10));
CREATE TABLE TEMP_C
( NAME VARCHAR2(100),
STRUCTURE VARCHAR2(10),
VALUE VARCHAR2(10));
Alter table TEMP_C
add constraint fk_name_tempc foreign key(name) references TEMP_A(name)
INSERT INTO TEMP_A VALUES('SMITH');
INSERT INTO TEMP_A VALUES('ALLEN');
INSERT INTO TEMP_A VALUES('WARD');
INSERT INTO TEMP_A VALUES('JONES');
COMMIT;
INSERT INTO TEMP_B VALUES('IN');
INSERT INTO TEMP_B VALUES('IN_MIN');
INSERT INTO TEMP_B VALUES('IN_TYP');
INSERT INTO TEMP_B VALUES('IN_MAX');
INSERT INTO TEMP_B VALUES('DIP');
INSERT INTO TEMP_B VALUES('TIM');
COMMIT;
INSERT INTO TEMP_c VALUES('SMITH','C1','');
INSERT INTO TEMP_c VALUES('SMITH','C2','');
INSERT INTO TEMP_c VALUES('SMITH','D1','');
INSERT INTO TEMP_c VALUES('ALLEN','D2','');
INSERT INTO TEMP_c VALUES('ALLEN','R1','');
INSERT INTO TEMP_c VALUES('WARD','R2','');
COMMIT;
i want to say is it should insert into table 'TEMP_C' values as :
For 'SMITH' there should be (6 * 3) = 18 records.
( 6 distinct values of TEMP_B for SMITH to be inserted into TEMP_C against 'C1')
( 6 distinct values of TEMP_B for SMITH to be inserted into TEMP_C against 'C2')
( 6 distinct values of TEMP_B for SMITH to be inserted into TEMP_C against 'D1')
For 'ALLEN' there should be (6 * 2) = 12 records.
( 6 distinct values of TEMP_B for ALLEN to be inserted into TEMP_C against 'D2')
( 6 distinct values of TEMP_B for ALLEN to be inserted into TEMP_C against 'R1')
For 'WARD' there should be (6 * 1) = 6 records.
( 6 distinct values of TEMP_B for WARD to be inserted into TEMP_C against 'R2')
Like this if there are records for JONES also , it should also do the same way( Depending on the No. of records present
in the table 'TEMP_C' for 'JONES').
Thanks in advance,
AmkotzIs this what you are looking for?
SQL> insert into temp_c (name, structure, value)
2 select c.name, c.structure, b.structure
3 from temp_a a, temp_c c, temp_b b
4 where a.name = c.name
5 ;
36 rows created.
SQL> select * from temp_c;
NAME STRUCTURE VALUE
SMITH C1
SMITH C2
SMITH D1
ALLEN D2
ALLEN R1
WARD R2
SMITH C1 IN
SMITH C1 IN_MIN
SMITH C1 IN_TYP
SMITH C1 IN_MAX
SMITH C1 DIP
SMITH C1 TIM
SMITH C2 IN
SMITH C2 IN_MIN
SMITH C2 IN_TYP
SMITH C2 IN_MAX
SMITH C2 DIP
SMITH C2 TIM
SMITH D1 IN
SMITH D1 IN_MIN
SMITH D1 IN_TYP
SMITH D1 IN_MAX
SMITH D1 DIP
SMITH D1 TIM
ALLEN D2 IN
ALLEN D2 IN_MIN
ALLEN D2 IN_TYP
ALLEN D2 IN_MAX
ALLEN D2 DIP
ALLEN D2 TIM
ALLEN R1 IN
ALLEN R1 IN_MIN
ALLEN R1 IN_TYP
ALLEN R1 IN_MAX
ALLEN R1 DIP
ALLEN R1 TIM
WARD R2 IN
WARD R2 IN_MIN
WARD R2 IN_TYP
WARD R2 IN_MAX
WARD R2 DIP
WARD R2 TIM
42 rows selected.
SQL> -
Retriving data from more than one table
I have 6 tables with name A,B,C,D,E,F all of them have 1 column as common. I need help in developing a sql query which will give me name of table where record is present and number of its occurrences.
926085 wrote:
I have 6 tables with name A,B,C,D,E,F all of them have 1 column as common. I need help in developing a sql query which will give me name of table where record is present and number of its occurrences.You can check the table_name where column value is present by
select table_name, AVG_COL_LEN from user_tab_columns where column_name='ID' and AVG_COL_LEN != 0;You'll get the results if you have all these table analyzed -
Retrieval of Data from More Than Two tables
Hi Experts,
How to get the data from more than two tables.
By using Jdbc, and through only core java.
I mean if i entered some empid at command prompt,
then the complete data (where empid is presented at some tables like L1,L2,L3,L4.) is to be displayed.
Bye
TulsiRam Mohan.
Message #196971Is creating view on these 4 tables is an option ?
Something like :
Select * from a
union all
select * from b
... and so on ? -
How to create Criterian For more than one table
Hi,
I have one problem how to create criteria for more than one table in that using one criteria hot to get the values from database in that more than onetable for getting these values .Please send me the exampke code.
reagrds,
raghuHi,
I don't think its possible to create fieldcatalog for different tables,
but if you want to do so create a dummy table which has all the fields which you want in fieldcatalog.
populate the data from different table to that dummy table
then create fieldcatalog for that table and pass it in the function module...
Regards,
Siddarth -
How to delete contents from more than 1 table
How to delete the entire contents from more than 1 table in a single query.
It is very urgent,
Thanks in advance
JohnGoto SE11 ->Open table ->Utility ->data base utility ->delete database table.
BTW, Do not do it.
Thanks,
Ashish -
Submitting data to more than one table
I want to be able to use one form to submit data to two or
more tables in the same database. Does anyone know if this is
possible and if so how would I go about it. I understand how to use
a form to submit to one table I am just stuck on more than one.
I am using Access 2000 and DW MX 2004
thanks in advanceIt's usually best to use a stored procedure to handle
this. -
Not able to view data from more than one data package in PSA
Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AMHi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe -
How do i print from more than one computer?
How do I set up my HP 4500 Envy printer to print by wireless for more than one laptop user?
Hi @MHorton,
Welcome to the HP Forums!
I understand that you are wondering how to set up your HP 4500 Envy printer to print by wireless for more than one laptop user.
In short, you will need to install the full feature software and drivers for each laptop, and make sure they are connected to the same wireless network as the printer.
Please see this guide, Installing the Printer Software for a Wireless Network Connection, for further assistance.
If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this information helps, please let me know if you have any other questions!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
How to remove tooltips from more than one field at a time?
I use the wizard and now there are more than 2000 fields with useless tooltips on each of them. How do I remove all the tooltips at once?
Run this code from the JS console:
for (var i=0; i<this.numFields; i++) {
var f = this.getField(this.getNthFieldName(i));
if (f==null) continue;
f.userName = ""; -
How to achieve data from more than 1 DAQ-assistant?
When running my LabVIEW program using the data coming from 2 simulation sources, no problem occurs and data is correct.
When using the data coming from 2 DAQ-assistants (real data), an error occurs, telling the following:
"ERROR 50103 occured at DAQmx Read (Analog 1D Wfm NChan NSamp).vi, reason: The specified resource is reserved. The operation could not be completed as specified"
Does anyone know what exactly is wrong and how to solve this problem?
Nowhere I found a solution for this problem and I have been trying numerous things to change in the program, but the same problem keeps occuring.
Could anyone please help me?
I need to solve this to be able to perform tests for my graduation project.
Tha
nk you very much in advance,
Yours Sincerely,
Karel RycekThe problem is you are trying to access the AI channels at the same time. When you setup the first DAQ assistant it reserves the AI section of the board. When you then try and use the second DAQ Assistant you get the error because it is trying to access a reserved section. If you had 2 different boards this wouldn't be a problem. That is probably overkill though. What you can do is read multiple channels in the 1st DAQ assistant and then in your program split the data off if you need to do different calculations.
-
Creating data source in R/3 system from more than one table.
Hi All,
Currently I have a requirement where I need to bring data in BW from 5 different table in the CM (our R/3 system) system.
How do I achieve this?
If I create a generic datasource, how can I map 5 tables in a single datasource?
Please detail the process to achieve this.
Regards,
Kironmoy BanerjeeHi ,
We can create the DS based on No.Of tables.
But need to check the below points.
1. Is there any relation ship between the tables (Means common Key).
- If the above condition is Ok then directly you can use view.
2. If there is no relation you have to FM.
- Please check the below link (Pdf Document) for how to to create FM in Generic :
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417100)ID0102005850DB00995891084283618218End?rid=/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008&overridelayout=true
Regards
Ram. -
How do i insert into more than one table from temp table?
Hi,
I have three tables such as temp,stck and stol
temp table contains data as below. It has 22 columns.
STOCK STOCKDESC ALIAS1 ALIAS2 ALIAS3 ALIAS4 ALIAS5 ALIAS6 ALIAS7 ALIAS8 ALIAS9 ALIAS10 ALIAS11 ALIAS12 ALIAS13 ALIAS14 ALIAS15 ALIAS16 ALIAS17 ALIAS18 ALIAS19 ALIAS20
bmg667691031 NOWE FINANSE LTD yy zz B282DV3 TESTICKER te te1 bmg667691031BM te 707943W ex IR-PRIME IR-ALTID IR-BLOOM NT-PRIME NT-ALTID NT-BLOOM AU-PRIME AU-ALTID AU-BLOOM mm
AA0098000181 UFACEX HOLDINGS VAR RT DUE 06-30-2010 kk yy mm TESTICKER aa ff AA0098000181GB bb 031969W cc IR-PRIME IR-ALTID IR-BLOOM NT-PRIME NT-ALTID NT-BLOOM AU-PRIME AU-ALTID AU-BLOOM ba
AC1350Z7M923 CDA GOVT TREAS BILLS CDS- 08-05-2010 ee ff gg TESTICKER hh ij AC1350Z7M923CA mn 1A1MTLU op IR-PRIME IR-ALTID IR-BLOOM NT-PRIME NT-ALTID NT-BLOOM AU-PRIME AU-ALTID AU-BLOOM op
stck table contains as below.It has six columns. But always first three columns will have values.
stock_id stock_code stock_description stock_type terriory_code preferred code
1185072 AED
1185073 ARA CURRENCY ARGENTINA PESO
1185074 ATS CURRENCY AUSTRIAN SCHS
stol table contains as below. It has 6 columns.Terriory_code is always empty.
stock_code territory_code stol_type stock_id stck_code_type sys_entry_date
AED 0 1185072 0 6/22/2007 3:59:13.000 PM
ARA 0 1185073 0 6/22/2007 3:59:13.000 PM
ATS 0 1185074 0 6/22/2007 3:59:13.000 PM
Now, i want to insert into stck and stol table based on temp table records. constraints to insert into stck and stol tables are as below
In temp table first column is called stock. This stock has to compare with stck table stock_code. If it is not present in stck table, then it has to insert into stck table with stock_id and stock_description. Here, I need to generate stock_id my self in the code.
In temp table, column 3 to column 22, i have alias. Each column has to check with stol table stock_code column. For instance, column3 check with stock_code column. Then column4 check with stock_code. If stock_code is not present in stol table, then i have to insert into stol table.
I need to generate stock,id in the code. How do i perform this insertion?
Edited by: user12852882 on Jun 12, 2010 2:37 AMIt can be done using SQL (no loops required)
insert into stock_table (stock_id,stock_code,stock_description)
select stock_id,get_stock_code,stockdesc /* get_stock_code is a function providing stock_code - usually a sequence value */
from (select t.stock stock_id,t.stockdesc,s.stock_id stock_stock_id
from temp_table t,stock_table s
where t.stock = s.stock_id(+)
where s.stock_id is null;
insert into stol_table (stock_code,sys_entry_date) /* not clear where other values to be inserted will come from */
select stock_code,sysdate
from (select t.stock_code,s.stock_code stol_stock_code
from (select distinct stock_code
from (select alias1 stock_code from temp_table union all
select alias2 from temp_table union all
select alias3 from temp_table union all
select alias4 from temp_table union all
select alias5 from temp_table union all
select alias6 from temp_table union all
select alias7 from temp_table union all
select alias8 from temp_table union all
select alias9 from temp_table union all
select alias10 from temp_table union all
select alias11 from temp_table union all
select alias12 from temp_table union all
select alias13 from temp_table union all
select alias14 from temp_table union all
select alias15 from temp_table union all
select alias16 from temp_table union all
select alias17 from temp_table union all
select alias18 from temp_table union all
select alias19 from temp_table union all
select alias20 from temp_table
) /* use unpivot instead if you are 11g */
where stock_code is not null
) t,stol_table s
where t.stock_code = s.stock_code(+)
where s.stock_code is null;
and think about damorgan's post, you'll never regret it (especially when you will not just think)
Regards
Etbin -
Basic, basic question - how to order prints from more than one album at onc
I am having two problems with iphoto - I would be most grateful for any help. First, when I go to upload my photos to a web-based printing company (like shutterfly or snapfish), and I click on the vendor's "browse" photos to find the album to upload, the way the photos come up does not correspond to my album titles in iphoto, so I can't find them. I have my photos sorted in labeled albums, and would like to upload them as such, but when I click on iphoto library, it brings up all kinds of other files that don't correspond to my current file labels. Can anyone help?
Equally irritating, when I use apple's "order print" features, it only lets me order from one album at a time. I'd like to order from multiple albums all at once, without paying shipping for each one. Any ideas? Again, most grateful for any advice.Hi, Sestew, and welcome to Apple Discussions.
Problem 1: Export the photos you want printed from iPhoto to a folder on the desktop. Use the printer's browser to navigate to that folder and upload them to the printing company from it. After uploading them, trash the folder that contains the exported copies. The pictures are still safe in your iPhoto library.
Problem 2: Create a new album and place all the pictures you want printed in it. (A photo can appear in any number of albums, so doing this won't remove any of the pictures from the other albums they're already in.) Then order that album printed. Delete the album after ordering, if you wish — the pictures will remain in whatever other albums you've placed them in. -
Get data with more than one table
hi Gurus,
I am from ABAP and now am doing Crystal reports...please bear with me if am silly.
in ABAP I have developed a report based on my select statement.
ex : **SELECT SINGLE * FROM cabn WHERE atnam EQ 'Z10_OPS_INC_REGION'.**
CLEAR ausp_objek.
CONCATENATE cciht_ihva-recn cciht_ihva-actn INTO ausp_objek.
CLEAR ausp.
now i have value in ausp_objek based on this i gone to other table to get the ausp-atwrt
SELECT DISTINCT atwrt FROM ausp
INTO CORRESPONDING FIELDS OF TABLE lt_ausp
WHERE objek EQ ausp_objek
AND atinn EQ cabn-atinn
so i have value in lt_ausp-atwrt which i wanted..
so in CRYSTAL How does this work???...i have linked the tables but it is not a direct value from single table...at this point how do we get the desired results...
hope am clear...
thank you,
pasala.Hi Pasala,
Nothing silly about it... We have a forum called SAP integration Kit which is both familiar with ABAP and CR so I moved your post to that forum.
Try searching on the home page for this forum on "ABAP" and you'll find lots of examples and suggestions and of course others will help too.
Don
Maybe you are looking for
-
SAP HR- Project Preparation- ECC6
Hi Gurus, Please can you help. My company already have ecc5, and now want to upgrade to Ecc6. What issues do I have to look into for this? technical and business minded. Will the be anything to consider, discuss, change? I am a junior, and have been
-
Error While Bursting Invoices Through Web Service
Hi All, In our present implementation, we are using BI Publisher to generate pdf invoices and send them to customer through email. We have three seperate servers say server A (Billing application server running on HP Unix), server B ( File server and
-
I cannot find my document of pages. It had saved now after a month it has diappeared. Could it have been saved/sent elsewhere?
-
I am having a problem to listen radio program online
HP Pavilion dv7 Windows 7
-
Role- group in weblogic-ejb-jar.xml?
How do I map a security role, defined in ejb-jar.xml, to a group (e.g., not just a single Principal)? For example, I'd like to have the following in weblogic-ejb-jar.xml: <security-role-assignment> <role-name>EJBAdministrator</role-name> <principal-n