JDE worldsoft 9.1 Facing the problem of extending cost is calculating wrong
IN JDE worldsoft 9.1 we are facing the problem of extending cost is calculating wrongly.
at the time of shipment confirmation in table F42119 it is calculated with 100 that means with decimals if the extended cost i( Qunatity 1 * cost 100 = Extended cost should be100 but here it is showing 10000 )
Can any one help on this.
If I understand your problem correctly I would suggest looking into Sar# 8948245.
Nichelle
Similar Messages
-
I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"
Same problem here in Brazil.
It seems to be a problem with logging in App Store in the Mac (Yosemite 10.10.2).
When I tried the very same userid and password I was able to login in to use my iCloud account from the same computer and also from my iPhone. -
Facing the problem while creating sales order
Hi,
I am facing the problem while saving the sales order.
Error in system xxx/400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022Product cannot be recoded for ERP System xxx/400(Notification E CRM_ORDER_MISC 015)
u2022Product cannot be recoded for ERP System xxx/400 (Notification E CRM_ORDER_MISC 015)
Kindly assist me.
MadhuHi Madhusadan,
Can you check whether the product exists in the ERP System or not? You can take the product names and can check the same using the Tcode: MM03 in ECC System. Also, it would be good if you have a look at the product from the CRM System if there are any errors or the product is already archived.
Is the Sales Order you are creating from a Preceding Transaction ?
Hope this helps.
Thanks,
Samantak. -
Facing the problem in loading the applet in mozilla, Firefox and netscape
Dear sir,
Well I am facing the problem regarding loading of applet in firefox,mozilla and netscape. Its working fine in IE6 I have the samplecode which asks for jdk1.4 whenever the applet gets loaded in IE6 and also it works fine for every browser but he is asking jre for every time whenever the page gets loaded even if the jre is installed. I need a code such that it should ask only if the jre is not installed. One more thing is it so that for mozilla or netscape the jre installation files are different.
pls give the solution.
Well I am also facing the problem like when I load login page of my applicatoin in netscape or firefox
I provided the buton on login page on which the hyperlink is present, the hyperlink is of servlet path when I click on the same it shows me the blank page instead he should forward the page to the next jsp webpage where I am showing the applet. But it works fine in IE versions and opera but not in the others.
Awating for your reply.
Rgs
sumeet.Issue resolved with the help of ABAP.
Regards
Bijudas -
i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....
If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
You know it is disabled if there is no padlock in the middle of the icon. -
in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3
Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.
-
while opening pdf files the menu bar, navigation bar cracks unobviously and also close and minimise buttons goes hidden..Facing the problem for last one month. Please help.
The latest Kaspersky software version is 15.0.1.415 or 15.0.1.415ab.
-
after my update iOS7 then I am facing the problem
of cannot update my purchase software & keep on showing
that I am in US store although I updated in Singapore. Only things is i was traveling to US & Europe recently. How to fix?Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
I am facing the problem of frequent opening of prompt iclould password window but I don't know the password,plz help me
Hello, Iasahil.
Thank you for visiting Apple Support Communities.
If you are unsure of your iCloud password, I would recommend resetting it via the steps in the article below.
If you forgot your Apple ID password
http://support.apple.com/en-us/HT201487
Cheers,
Jason H. -
Iphone is becoming hot and facing the problem of drain battery please find me a solution
I am having iPhone 4s but recently my iphone is becoming hot and facing the problem of drain battery please find me a solution
I have faced these problem more when I have upgraded it to ios 7.1
Please find me solutionHi Gulshan........
Welcome to SAP........
Can you please tell us at what point exactly it takes to much time to open?
Is that at initial stage when you login into SAP or when you do entries or run report?
When exactly?
Regards,
Rahul -
Facing the problem ValueChangeListener of the Drop Down List
Hi,
I am using the JDeveloper 10.1.3.5.0 and the JHeadStart 10.1.3.3.88. In my requirement, I am having three View Objects(V1,V2,V3). I need to create a page based on one VO(V1) displayed as table. In the screen, there are 6 columns. Three of them(C1,C2,C3) are having the static values( coming from the VO(V1) from which it has been built), and the others are, one column(C4) is displayed as the drop down list(for some of the rows, drop down list values are coming from the VO(V2), and for the others drop down list values are coming from the other VO(V3). The other column(C5) is a input text field, that is enabled or disabled based on the selected values from the drop down list column(C4). The column(C6) is a check box. Now, coming to the actual requirement, the rows are related to the papers. For each paper, there are 5 methods of studies. One of the method of study is SelfLearning (5th method of study), for this the drop down values are coming from the VO(V3), and for the other methods of studies(1 to 4), the drop down values are coming from the VO(V2). Now, for a user, based on the number of papers, the number of rows are displayed.(1 paper- 5 rows, 2 papers-10 rows like wise). Initially, drop down list is displaying the null values. When I change the value in the drop down list, I need the ValueChangeListener has to be called and it has to call the method in the bean. From the bean, the column(C5) has to be enabled or disabled. This is working fine for the inital 5 rows and 7,8,9,10 rows and 12,13,14,15 rows. But, the ValueChangeListener is not working for the rows 6 and 11. I used the debug concept,and I confirmed that the valueChangeListener is not getting called for the rows 6,11,16 rows.
C 1
C 2
C 3
C 4
C 5
C 6
P1
ABC
Study Method1
Drop Down list1
input text box
check box
P1
ABC
Study Method2
Drop Down list2
input text box
check box
P1
ABC
Study Method3
Drop Down list3
input text box
check box
P1
ABC
Study Method4
Drop Down list4
input text box
check box
P1
ABC
Study Method5
Drop Down list5
input text box
check box
P2
DEF
Study Method1
Drop Down list1
input text box
check box
P2
DEF
Study Method2
Drop Down list2
input text box
check box
P2
DEF
Study Method3
Drop Down list3
input text box
check box
P2
DEF
Study Method4
Drop Down list4
input text box
check box
P2
DEF
Study Method5
Drop Down list5
input text box
check boxThe problem gets solved. Actually, the problem is at the VO Query. The small modification in the query at the attribute p_id( C1 ) has solved the issue.
-
I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?
No - I have not tried other routers on my network.
What I meant was I could use my itouch on other users wireless networks without any issues.
I'll update the routers DNS to try using Google's 8.8.8.8 instead of my ISP.
Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS? -
Dear Team,
Please solve this problem.
Open the outlook then show below error.
1. Check online for a solution and close the problem
2. Close the program
Please do the needful as well as possible.
Thanks & Regards.
Devesh Yadav
9999815203Hello,
So Outlook has failed to launch and an error dialog (error reporting) pops up. A lot of things can cause this issues.
One of the main causes is a corrupt Navigation Pane settings file. You might need to start Outlook using the /resetnavpane
switch. Just run command (Windows key + R), type or paste:
outlook.exe /resetnavpane (Please note that you will lose any customizations on the navigation pane)
In certain cases, a corrupted data file will also cause this problem. So, if the /resetnavpane switch doesn't really work, please try to repair your data file with
scanpst.exe tool:
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
If these cannot fix your issue, please be more specific on the error. Please click the button at the bottom of the error pop ups and copy the
Problem signature here.
Thanks,
Ethan Hua CHN
TechNet Community Support -
For the fist time I relly need help folks!!
There is no way to make my Ipad 2 to connect to public wifi Networks!
It seems there is something really wrong with IOS 6!!
This is really a big issue because tablets are really made to facilitate mobile access !
After doing everything that was possible to do, I believe the problems is with IOS 6 that need to be fixed very fast by Apple.
Thanks in advance for any assistance addressed to theis problems,
Regards, EduardoiOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I created a package named test1 in the software Eclipse*, and set two classes named ButtonFrame and ButtonTest to display a panel with two buttons:
{color:#00ccff}{color:#3366ff}package test1;
{color}
{color}
{color:#00ccff}{color:#3366ff}{color:#00ff00}{color:#339966}// Fig. 11.15: ButtonFrame.java
// Creating JButtons.{color}
{color}
import java.awt.FlowLayout;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.JFrame;
import javax.swing.JButton;
import javax.swing.Icon;
import javax.swing.ImageIcon;
import javax.swing.JOptionPane;
{color}
{color}
{color:#00ccff}{color:#3366ff}public class {color:#ff0000}ButtonFrame{color}{color} {color:#3366ff}extends JFrame {
{color}{color}{color:#3366ff}private JButton plainJButton; {color:#339966}// button with just text
{color}private JButton fancyJButton; {color:#339966}// button with icons
{color}
{color}
{color:#3366ff}{color:#339966}// ButtonFrame adds JButtons to JFrame{color}
public ButtonFrame() {
super("Testing Buttons");
setLayout(new FlowLayout()); {color:#339966}// set frame layout{color}
{color}
{color:#00ccff}{color:#3366ff}plainJButton = new JButton("Plain Button"); {color:#339966}// button with text
{color}add(plainJButton); {color:#339966}// add plainJButton to JFrame
{color}
{color}
{color}
{color:#00ccff}{color:#3366ff}Icon bug1 = new ImageIcon(getClass().getResource("bug1.gif"));
Icon bug2 = new ImageIcon(getClass().getResource("bug2.gif"));
fancyJButton = new JButton("Fancy Button", bug1); {color:#339966}// set image
{color}fancyJButton.setRolloverIcon(bug2); {color:#339966}// set rollover image
{color}add(fancyJButton); {color:#339966}// add fancyJButton to JFrame{color}
{color}
{color}
{color:#00ccff}{color:#3366ff}{color:#339966}// create new ButtonHandler for button event handling{color}
ButtonHandler handler = new ButtonHandler();
fancyJButton.addActionListener(handler);
plainJButton.addActionListener(handler);
} {color:#339966}// end ButtonFrame constructor{color}
{color}
{color}
{color:#3366ff}{color:#3366ff}{color:#339966}// inner class for button event handling
{color}private class ButtonHandler implements ActionListener {
{color:#339966}// handle button event{color}
public void actionPerformed(ActionEvent event) {
JOptionPane.showMessageDialog(ButtonFrame.this, String.format(
"You pressed: %s", event.getActionCommand()));
} {color:#339966}// end method actionPerformed{color}
}{color:#339966} // end private inner class ButtonHandler{color}
} {color}{color:#339966}// end class ButtonFrame
{color}
{color:#3366ff}
{color:#3366ff}package test1;
{color}
{color:#3366ff}{color:#339966}//Fig. 11.16: ButtonTest.java
// Testing ButtonFrame{color}.
import javax.swing.JFrame;
{color}
{color:#3366ff}public class ButtonTest {
public static void main(String args[]) {
{color}{color:#ff0000}ButtonFrame buttonFrame = new ButtonFrame();{color}{color:#33cccc}{color:#3366ff} {color:#339966}// create ButtonFrame{color}
buttonFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
buttonFrame.setSize(275, 110); {color:#339966}// set frame size{color}
buttonFrame.setVisible(true); {color:#339966}// display frame{color}
} {color:#339966}// end main
{color}} {color}{color:#339966}// end class ButtonTest
{color}
{color}
{color}
{color}
{color:#000000}When I launch the class ButtonTest, the problem happen, the class name of the ButtonFrame had been doubt, it indicated:"{color:#ff0000}The serializable class ButtonFrame does not declare a static final serialversionUID field of type long{color}{color}" how can I slove this problem?
Edited by: Leaner on Mar 4, 2008 3:43 PM{color:blue}Easy with the colors OK?{color}
{color:#000000}T{color}{color:#010101}h{color}{color:#030303}a{color}{color:#040404}t{color}{color:#060606}'{color}{color:#070707}s{color}{color:#090909} {color}{color:#0a0a0a}j{color}{color:#0c0c0c}u{color}{color:#0e0e0e}s{color}{color:#0f0f0f}t{color}{color:#111111} {color}{color:#121212}a{color}{color:#141414} {color}{color:#151515}w{color}{color:#171717}a{color}{color:#191919}r{color}{color:#1a1a1a}n{color}{color:#1c1c1c}i{color}{color:#1d1d1d}n{color}{color:#1f1f1f}g{color}{color:#202020} {color}{color:#222222}a{color}{color:#232323}n{color}{color:#252525}d{color}{color:#272727} {color}{color:#282828}i{color}{color:#2a2a2a}f{color}{color:#2b2b2b} {color}{color:#2d2d2d}y{color}{color:#2e2e2e}o{color}{color:#303030}u{color}{color:#323232} {color}{color:#333333}a{color}{color:#353535}r{color}{color:#363636}e{color}{color:#383838}n{color}{color:#393939}'{color}{color:#3b3b3b}t{color}{color:#3d3d3d} {color}{color:#3e3e3e}s{color}{color:#404040}e{color}{color:#414141}r{color}{color:#434343}i{color}{color:#444444}a{color}{color:#464646}l{color}{color:#474747}i{color}{color:#494949}z{color}{color:#4b4b4b}i{color}{color:#4c4c4c}n{color}{color:#4e4e4e}g{color}{color:#4f4f4f} {color}{color:#515151}i{color}{color:#525252}n{color}{color:#545454}s{color}{color:#565656}t{color}{color:#575757}a{color}{color:#595959}n{color}{color:#5a5a5a}c{color}{color:#5c5c5c}e{color}{color:#5d5d5d}s{color}{color:#5f5f5f} {color}{color:#606060}o{color}{color:#626262}f{color}{color:#646464} {color}{color:#656565}t{color}{color:#676767}h{color}{color:#686868}e{color}{color:#6a6a6a} {color}{color:#6b6b6b}c{color}{color:#6d6d6d}l{color}{color:#6f6f6f}a{color}{color:#707070}s{color}{color:#727272}s{color}{color:#737373} {color}{color:#757575}y{color}{color:#767676}o{color}{color:#787878}u{color}{color:#7a7a7a} {color}{color:#7b7b7b}c{color}{color:#7d7d7d}a{color}{color:#7e7e7e}n{color}{color:#808080} {color}{color:#818181}i{color}{color:#838383}g{color}{color:#848484}n{color}{color:#868686}o{color}{color:#888888}r{color}{color:#898989}e{color}{color:#8b8b8b} {color}{color:#8c8c8c}i{color}{color:#8e8e8e}t{color}{color:#8f8f8f}.{color}{color:#919191} {color}{color:#939393}O{color}{color:#949494}n{color}{color:#969696}e{color}{color:#979797} {color}{color:#999999}w{color}{color:#9a9a9a}a{color}{color:#9c9c9c}y{color}{color:#9e9e9e} {color}{color:#9f9f9f}t{color}{color:#a1a1a1}o{color}{color:#a2a2a2} {color}{color:#a4a4a4}s{color}{color:#a5a5a5}t{color}{color:#a7a7a7}o{color}{color:#a8a8a8}p{color}{color:#aaaaaa} {color}{color:#acacac}t{color}{color:#adadad}h{color}{color:#afafaf}e{color}{color:#b0b0b0} {color}{color:#b2b2b2}w{color}{color:#b3b3b3}a{color}{color:#b5b5b5}r{color}{color:#b7b7b7}n{color}{color:#b8b8b8}i{color}{color:#bababa}n{color}{color:#bbbbbb}g{color}{color:#bdbdbd} {color}{color:#bebebe}i{color}{color:#c0c0c0}s{color}{color:#c1c1c1} {color}{color:#c3c3c3}t{color}{color:#c5c5c5}o{color}{color:#c6c6c6} {color}{color:#c8c8c8}d{color}{color:#c9c9c9}o{color}{color:#cbcbcb} {color}{color:#cccccc}w{color}{color:#cecece}h{color}{color:#d0d0d0}a{color}{color:#d1d1d1}t{color}{color:#d3d3d3} {color}{color:#d4d4d4}i{color}{color:#d6d6d6}t{color}{color:#d7d7d7} {color}{color:#d9d9d9}s{color}{color:#dbdbdb}u{color}{color:#dcdcdc}g{color}{color:#dedede}g{color}{color:#dfdfdf}e{color}{color:#e1e1e1}s{color}{color:#e2e2e2}t{color}{color:#e4e4e4}s{color}{color:#e5e5e5}.{color}{color:#e7e7e7} {color}{color:#e9e9e9}A{color}{color:#eaeaea}d{color}{color:#ececec}d{color}{color:#ededed} {color}{color:#efefef}t{color}{color:#f0f0f0}h{color}{color:#f2f2f2}e{color}{color:#f4f4f4} {color}{color:#f5f5f5}f{color}{color:#f7f7f7}i{color}{color:#f8f8f8}e{color}{color:#fafafa}l{color}{color:#fbfbfb}d{color}{color:#fdfdfd}:{color}
private static final long serialversionUID = 0;
Maybe you are looking for
-
Std. Report that shows PSG linked to WBS (Pdt. hier. defined)
Hi Experts, Is there any standard report that show, which Profit segment is derived and receives settled costs and revenues for a particular WBSE? Our scenario: (1) Billing WBS element is assigned to SO Line item, and billing plan is created and acco
-
Need Help, I Pod Can't be read from or written to, but can download music??
I have a 30G IPod. I can add music to my IPod from ITunes (when it recognizes my Ipod, usually have to unplug it once or twice first). But, when I try to change the settings to "manually manage songs and playlist" and/or try to import pictures onto m
-
SMTP Port # for use in hotels etc
Ive tried various methods and have webmail enabled but wondering if there is a recommended alternate port user's can input into entourage/mail when in a hotel or something where 25 is blocked. What's a recommended way to change it or add it on there
-
The first photo of one of my albums is vertical but I see it horizontal.
The first photo of one of my albums photo is vertical but I see cropped in the horizontal format. How can I see right? Regards.
-
hi I got the assignment to display the ipc component like subtotal,fright charges in jsp page of isa.(SAP E-Commerce 5.0) . But I am not able to find how to do it. the arrangement of the system is as given below. ECC 6.0 as sap R/3 and sap b2b isa