JDev 11.1.2.3 is creating multiple PageDefs

Hello:
I am creating a Dashboard, so I have many view objects (SQL based) that use bind parameters. In a Bounded Task Flow (BTF) I drag from Data Controls the ExecuteWithParams onto the BTF, so that these bindings fire before displaying the page. (I then connect them with Control Flows) But each time I drag a different ExecuteWithParams to the BTF, JDev creates a NEW PageDef file. For example:
xxx_xxx_xxx_btf_ExecuteWithParamsPageDef.xml
xxx_xxx_xxx_btf_ExecuteWithParamsPageDef1.xml
xxx_xxx_xxx_btf_ExecuteWithParamsPageDef11.xml
xxx_xxx_xxx_btf_ExecuteWithParamsPageDef111.xml
xxx_xxx_xxx_btf_ExecuteWithParamsPageDef1111.xml
The DashBoard seems to work ok, but I do not understand why all these PageDef files are created (one pageDef file created for each drop of an ExecuteWithParams on the BTF)
Is this expected behavior? or a Bug?
I tried pre-creating the operation bindings in one PageDef, then dragging ExecuteWithParams to the BTF, but still the same problem.
Is there a way to use a single PageDef for this DashBoard Use-Case? Any suggestions?
Thanks for the Help.

Hi Timo:
As long as it works, I guess I dont see the problem. But it seems very strange to see many pageDef's with only a single operationBinding in each.
Thanks for the help.

Similar Messages

JDev 11g: Create Multiple Record.

Hi,
I have a requirement to create multiple record by clicking the create button multiple times and on one click it should save all the records. Everything is working fine, but the issue is,
when user created 4 records and the 5th record he doesn't want to create then issue is comming. Application is forcing him to enter the data, is there is any way to handle this situation.
I mean, if the 5th record doesn't contain any data.. it should save 4 records only. Please suggest me the solution to achieve this.
Thanks,
Rajesh

Hi Shay,
Thanks for your reply. But your second solution will never occur in my case because validator methods will not allow user to click on save button without entering the proper data.
Is there any otherway instead of deleting the record to achieve this functionality.
Thanks,
Rajesh

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

How do i creating multiple icloud accounts for one itunes account

how do i creating multiple icloud accounts to access one itunes account?

Perhaps you could explain a bit more what you want to do...
iCloud accounts don't access an iTunes account.
iTunes account is used to make purchases.

How do I create multiple-up pages populated with variable data?

I am trying to create a variable data Illustrator file but with a catch, I have to create multiple points of data on one artboard. I am using a template with 36 identical shapes, and I'm trying to add a different image to each based off of using variable data. I understand the premise of creating multiple output files based off of an illustrator file and data, but I have to create a single output file using 36 points of data, all QR codes. The reason is that this 36-up 14.5" x 14.5" sheet will be printed on a large format inkjet and then be fed into another machine (not a cutter) that requires that specific layout for it's process. I cannot create individual files, I need sheets based off of my 14.5" x 14.5" 36-up template.
Any suggestions other than making each shape in the template a separate variable (even though they are all the exact same shape) would be greatly appreciated.
My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.

My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.
You're barking up the wrong tree for this with Illustrator's Variables palette.
Think of it like this:
Imagine a typical spreadsheet with multiple rows of the same kind of data, except for the first row which serves as the "labels" of the columns.
The on-page objects which you define as Variables in Illustrator correspond to the first row; the column labels.
The datasets correspond to the following rows of values below the label row.
Cycling through the datasets simply moves up and down the rows, revealing one row's data at a time for each of the column labels.
Your multi-up array does not fit that data model. You are essentially trying to make a layout showing all the individual cells below the single label of one column (downward across all rows). (Illustrator's Variables feature doesn't even let you put multiple instances of a single variable in the document, so that the same value occurs in multiple places.)
You're trying to build the functional equivalent of a typical "gang up" press sheet, like a 10-up layout of business cards, each showing the same kind of data (name, phone, etc.) for multiple employees, so that you don't have to do separate press runs for each employee. That's certainly a common need, and one quite appropriate to a program like Illustrator. But Illustrator's Variables feature does not do that.
Essentially, what you are wanting to do is to replicate the basic functionality of any program which is used to print labels from data (like the typical mail merge function for address labels which are ganged up with some number of different labels on a page). What you want could be done in Illustrator via a custom JavaScript, but it would be a pretty silly exercise in reinventing the wheel. If it were me, I'd probably build the solution in FileMaker Pro (a database program), depending on the specific graphics requirements. However, you should be able to do it in InDesign, using its data merge feature.
JET

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph.
I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature. I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph. Is this possible?
Thanks!

Nice of you to be doing this for your Mother's Thesis.
There are several issues here:
1. A Paragraph Style is what it says, the style for the paragraph
2. You can format text within a paragraph by applying a Character Style
3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
So in answer to your question, no.
You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
Peter
Apple's marketing slogan:
Pages 5.5.1 - Can't Do That!

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

Create Multiple Build Controllers in Team Foundation Server 2013

Hi all,
I have created an environment of Team Foundation Server 2013 & also installed SharePoint Foundation 2013. Everything is working fine. I have created a build controller on the same machine on which I have installed the TFS. This build controller is used
for building the projects of a Team Project Collection. I know that a build controller can only be used for one Team Project collection. Creating multiple build controllers on the same machine is not recommended by Microsoft.
I have another team project collection, for this I need to create another build controller. Could you please tell me how to create another build controller on a different machine.
Please help me with this.
Thanks.

Hi Vishwajeet,
You can do this by installing TFS in another machine (do not configure as app tier), and then configuring build services.
Complete instructions are in my post here http://chamindac.blogspot.com/2014/02/06-setup-build-server-setup-virtual.html
Setting up a TFS environment step by step explained in this blog series
http://chamindac.blogspot.com/2013/12/setup-virtual-environment-for-tfs-2013.html
My posts explain how to setup on virtual box but it is same steps even if you setup in hyperv VM or in a standard machine.
One more recommendation I would like to make here is, it is better if you do not configure build services in TFS App Tier. Use separate build servers. Another one is do not create too many project collections. Project collections require separate build servers,
test controllers etc. because one is fully isolated from another collection. So carefully plan your TFS environment. I recommend you to download and read TFS Planing Guide from ALM Rangers from here
http://vsarplanningguide.codeplex.com/releases
Cheers!
Chaminda

Split the delivery or create multiple deliveries

Hi team,
Sale order stock is grater than Truck capacity.
We need a solution to either split the delivery; or create multiple deliveries at the time of delivery creation.
Manually we are doing calculations for pallets capacity and then doing loading still some quantity pending or some space pending
Is there any program that can split delivery via Sales order and create Outbound delivery through pallatization..
Any such scenarios you have please suggest.?
Thanks in Advance
SAP MM

Hi,
Normally we can split the deliveries based on the following criteria
1. Different delivery dates for line items.
2. Different ship to parties for line items.
3. Different routes for line items.
But in your above case the issue is regarding truck capacity for which the system doesn't have any information. So you can manually create a new delivery by adjusting the existing one or if you feel the issue is going to repeat for different items in future also then you can go build a custom logic in the system to address the delivery split using a user exit.
Thanks,

Using Select all to create multiple lines in a sales order

Hello SAP experts,
In our business practice users create multiple line sales orders with reference to contracts and use the copy paste method and then assign each line to the contract manually.
After a few years of this practice i found a new way to create multiple lines but it doesn't quite work correctly. When you have created the first line of an order if you click on the select all button the system will ask you how many lines do you want to copy. I don't know if this is standard SAP but 3 things don't happen when we use this 1) The schedule line information is blank 2) conditions do not copy from the contract even though the contract has been referenced. 3) Since there is no schedule line information the order fails when saving and we get a update terminated message.
I am having problems finding any documentation around this function so any help with this would be greatly appreciated.
error when updating is
Transaction..   VA01
Update key...   4D358878A8B601AAE10080000A2C4982
Generated....   28.01.2011, 13:47:23
Completed....   28.01.2011, 13:47:23
Error Info...   00 671: ABAP/4 processor: GETWA_NOT_ASSIGNED

GETWA_NOT_ASSIGNED
Many threads are there on this error message and you would come to know if you google with this text. Check couple of threads where the same topic was discussed
[Re: GETWA_NOT_ASSIGNED|Re: GETWA_NOT_ASSIGNED;
[Re: GETWA_NOT_ASSIGNED ABAP Dump|GETWA_NOT_ASSIGNED ABAP Dump;
Also there are some 20 OSS notes on this error message and you can have a look at the following notes:-
1)   Note 913679 - VA01: Short Dump GETWA_NOT_ASSIGNED on click of quantity.
2)   Note 591955 - ABAP runtime error GETWA_NOT_ASSIGNED
3)   Note 870670 - SD_SALES_DOCU_MAINTAIN_DIALOG termination with GETWA_NOT_***
4)   Note 141314 - VA02: Dump with 'GETWA_NOT_ASSIGNED'
thanks
G. Lakshmipathi

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

How to create multiple tabs of report in 1 crystal report file

Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
Rose

Hi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta

How do I create multiple FB accounts for uploading iPhoto pix?

I create content for several small business Facebook accounts.
I was hoping to create multiple FB accounts within the iPhoto sharing accounts preferences, but iPhoto doesn't seem to accept my FB alter egos.
I'd like to be able to have an account that goes right to my personal page pkus a separate sharing account for each FB page for which I'm an administrator. Doesn't seem like too much to ask, but I've been trying to figure this out for a few weeks now. Alas, FB has no real help to speak of so I throw myself on the mercy of the iPhoto community.
Any suggestions? It would make uploading to FB much speedier--so I'd do it whenever I import pix from my camera into iPhoto instead of being a FB slacker.
Thanks,
Nancy

Ahh, no wonder.
I had assumed from the account preference choices that I ought be able to create multiple sharing accounts in FB, because of the + sign. And, in fact, for a while time I did have two sharing accounts for two different personal FB accounts. At that time it did work to upload photos directly from iPhoto to the two different personal accounts. But I was never able to upload directly from iPhoto to the intended business account. And since upgrading I can't seem to create a second personal FB account in iPhoto.
Thanks, Larry, for the assistance. I'll follow your suggestion to recommend the feature to Apple.

HT5312 How Do I Stop email Harassment from same person creating multiple apple Ids?

Hi,
I am being harassed by someone who is creating multiple apple ids and deleting them. The person is constantly trying to get me to click on links. When I tried to reply to one ID the person created, an error came up stating "this user does not exist" It then provided me with a code for that user. I believe this person has hacked into my account on multiple occassion because a lot of time right after I change my password, it stopped working again a few days later.
I feel I have no privacy. This person sends all kinds of emails using the names of major brands as the front. All the emails look cheap and it seems as if it wants you to select the "unsubscribe" button which then phishes my info someone. Can someone tell me who I can report these emails at apple to investigate? The would have to know who created the email links, which are used once then deleted, but the person who is doing this is the same I'm certain.

Hello ascending404,
Thank you for the details of the issue you are experiencing with the emails you have been receiving. I would be concerned about this too. I found a resource that provides some good information about identifying and reporting emails like the ones you are recieving.
I recommend reviewing the full article, but this specific section provides steps for reporting these emails:
What to do with suspicious iCloud emails
If you receive a suspicious email, select the message text so that it is highlighted. Choose Forward as Attachment from the Message menu (OS X Mail) or the Actions menu (Outlook). Send the email to [email protected] This provides Apple's legal department and law enforcement with useful information to help prevent future phishing emails.
Note: For suspicious emails related to iTunes, see this article.
You can view the full article here:
Identifying fraudulent "phishing" email
http://support.apple.com/kb/HT4933
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

JDev 11.1.2.3 is creating multiple PageDefs

Similar Messages

Maybe you are looking for