JDev 11g: Task Flows,Rich Client- some questions to the Oracle team

Hello,
We're currently involved (early stages) in a large project with a Jan-Mar 2008 pilot delivery timeframe - one heavily including end-user customizable workflow elements, to which the aforementioned JDev/ADF 11 features would be a great fit.
Our plans so far were to go ADF with BC and include Shale or Spring WebFlow plus custom development to provide for the very same things that the feature-complete Task Flows will offer.
Questions:
1. Delivery timeframe - any unofficial pointers on the schedule for the next JDev/ADF releases?
2. Platform compatibility - Will the framework (ADF) run on J2EE 1.3 (OAS 10.1.2.x) or does it require 1.4+?
3. Design-time-at-runtime for Task Flows - Do we have it in the released bits? (Couldn't find it). Any pointers on how is it supposed to operate?
4. Am I right to think that what we're seeing with Task Flows is (among other things) a piece of the replacement functionality for the decommissioned Oracle Workflow subsystem (which bit us, by the way, as it was part of our original architecture).
5. Will Rich Client support older platforms than the currently supported IE7 and Firefox 2?
Thanks for any and all pointers,
Thanassis Stathopoulos
Athens, Greece

Thanks Shay,
http://www.oracle.com/technology/products/jdev/collateral/papers/11/newfeatures/index.html
Regarding my question 3 "Design time at runtime" - quoting from "JDeveloper 11g new features" at the above URL, under "ADF Task Flow". The third entry from the paragraph's end reads:
'Support for customization of task flows at runtime using "design time at runtime"'.
I was wondering what this is exactly - web-deployable editor to edit the flow definition after deployment?
Re your point 4, product replacement - with the feature set described in the paragraph above, Task Flows is much more than a Web UI controller. With "save for later", transactions, flow abstraction/nesting, BPEL outcalls, conditional logic, method calls etc etc it probably covers 50% of a typical workflow package and 75% of an embeddable workflow library (audit trail/timeouts/persistence nonwithstanding). This made me wonder whether it is part of a bigger, yet-to-be-announced OAS feature. Especially if one also considers the "design-time-at-runtime" sentence listed above.
Now, definition-wise, I guess it' s whether this feature set is considered half-full or half-empty :-)
Thanks again,
Thanassis

Similar Messages

O8EE-WAS302 A question for the Oracle Team

I have installed O8EE and attempt to install WAS 302. It does
not give any mistake upon installing but when I execute owsctl
start www, says that it does not find the file libndwzp.so, the
directory where is found this file is in LD_LIBRARY_PATH
variable, and computer it is hung. As curious thing is that
permits me to execute owsctl start wrb and owsctl start admin,
and with the browser can use the administration pages. Before I
have installed O8+WAS302 and was operating. Some idea? It is
incompatible the version EE with WAS?
null

Mladen,
With all due respect, Oracle is providing their software free for evaluation (otherwise playing around at home and letting companies play with it for 30 days to show how it womps on MS SQL et al.) purposes only. Their product is a commercial product and asking you to join OTN to download it, helps them enforce that individuals are using it for only these purposes. Allowing anonymous access means that they have no idea of where there software is going and what it is being used for. I dont know if you have priced out Oracle but if you have, I think you would come to the conclusion that it is a tad expensive to purchase, just for learning and throwing it on a resume. They are asking that you be accountable and responsible for upholding your end of the agreement and not using it in manners other than specified. I think that is a reasonable request for access to software of this caliber. You do not see MS giving away Dev Studio or MS SQL for the price of a little user information now do you.
null

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Some questions on the Sleek

Hey there. I have some questions regarding the Zen Sleek, since I may get one to replace my Zen Xtra.
First of all, how much does it cost to have the battery replaced? I've heard/read that you cannot do it yourself (which irks me to know end), but I haven't found anywhere what it would cost to have it sent in once the battery is dead.
Second, does the unit scratch easily? I don't want to buy an ugly, bulky case for it (since that's all that seems to be out there for anything that's not a Micro), but if the Sleek scratches as easily as the iPod, I may be forced to.
Thanks in advance for your help.

cera wrote:Thanks SSR, I'll have to look into the battery replacement program. I've read up on the CreativeCare protection plan, and it SEEMS that the battery would be covered under it. I'll have to e-mail or call and check.
I know the battery is covered under warranty, but it certainly shouldn't die ordinarily during that period.
I've left the screen protecting sheet on my Zen Xtra, and it's in great shape, so unless it becomes obnoxious, I think I'll end up leaving it on the Sleek as well. I may look into buying a case, or possibly just making my own.
There are some threads on cases for the Sleek so it's worth searching back. Creative often fail to launch a case as an accessory, or certainly to launch one at the same time as the player is released. This is a great shame, aside from not bundling a good case with the player, as it keeps the player looking good and may well end up making it last longer.
This is completely off topic, but I just realized that you wrote/host that excellent Donnie Darko FAQ. It helped me a lot when I first saw the movie and tried to figure it out.
Glad it helped

JDeveloper 11g/ADF Faces Rich Client

Hello,
We are trying to decide between using JDeveloper 10.1.4 and JDeveloper 11g for developing a new application - we plan to use just the ADF Faces layer of the ADF Framework along with Spring and TopLink for other layers.
On one hand we think that is is safer to use 10.x version of ADF Faces as it may be more stable and on the other hand we are tempted to use 11g as it provides Ajax-enabled JSF Components.
Has anyone used ADF Faces Rich Client Framework for developing applications? Is it stable enought to be used for production-level applications?
I would love to hear your thoughts!

Hi,
don't use 10.1.3.4 to develop a new application now unless you have browser constraints with your user-base.
ADF Faces RC / 11g requires:
FireFox 2, 3
Internet Explorer 7.0
Safari 3.0
11g is a significant update and they have vastly improved/redesigned a lot of things that were difficult/complex to do in earlier versions.
Plus the 11g user interface is way better from a users perspective.
Brenden

11g Task flow - Method call with router Issue

Hi, I am using bounded task flow method call - which is default activity. The outcome of method call will go to a router and that decides which method/page fragment has to be selected. But when ever i try to call the default activity only the default out come of the router (Page fragment) is shown in the jspx. When click on some button which is binded with the default activity - the task flow is not working as i expected. Pls find the code of my task flow below.
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="methodcall2task-flow-definition">
<default-activity>initiatetaskflow</default-activity>
<data-control-scope>
<shared/>
</data-control-scope>
<input-parameter-definition>
<name>methodname</name>
<value>#{CompanyBean.methodname}</value>
</input-parameter-definition>
<managed-bean>
<managed-bean-name>CompanyBean</managed-bean-name>
<managed-bean-class>com.boeing.seds.view.company.CompanyBean</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<method-call id="initiatetaskflow">
<method>#{CompanyBean.test}</method>
<outcome>
<fixed-outcome>#{CompanyBean.methodname}</fixed-outcome>
</outcome>
</method-call>
<router id="selectMethod">
<case>
<expression>#{CompanyBean.methodname eq 'default'}</expression>
<outcome>default</outcome>
</case>
<case>
<expression>#{CompanyBean.methodname eq 'addcompany'}</expression>
<outcome>addcompany</outcome>
</case>
<case>
<expression>#{CompanyBean.methodname eq 'gotoAddress'}</expression>
<outcome>gotoAddress</outcome>
</case>
<case>
<expression>#{CompanyBean.methodname eq 'gotoDist'}</expression>
<outcome>gotoDist</outcome>
</case>
<default-outcome>gotoAddress</default-outcome>
</router>
<view id="default">
<page>/includes/company/default.jsff</page>
</view>
<view id="addnewcompanyFrgmt">
<page>/includes/company/addnewcompanyFrgmt.jsff</page>
</view>
<method-call id="methodCall1">
<method>#{CompanyBean.addCompany}</method>
<outcome>
<to-string/>
</outcome>
</method-call>
<view id="supplierAddressFrgmt">
<page>/includes/company/supplierAddressFrgmt.jsff</page>
</view>
<view id="supplierDistributorFrgmt">
<page>/includes/company/supplierDistributorFrgmt.jsff</page>
</view>
<control-flow-rule>
<from-activity-id>initiatetaskflow</from-activity-id>
<control-flow-case>
<from-outcome>#{CompanyBean.methodname}</from-outcome>
<to-activity-id>selectMethod</to-activity-id>
</control-flow-case>
</control-flow-rule>
<control-flow-rule>
<from-activity-id>selectMethod</from-activity-id>
<control-flow-case>
<from-outcome>default</from-outcome>
<to-activity-id>default</to-activity-id>
</control-flow-case>
<control-flow-case>
<from-outcome>addcompany</from-outcome>
<to-activity-id>methodCall1</to-activity-id>
</control-flow-case>
<control-flow-case>
<from-outcome>gotoAddress</from-outcome>
<to-activity-id>supplierAddressFrgmt</to-activity-id>
</control-flow-case>
<control-flow-case>
<from-outcome>gotoDist</from-outcome>
<to-activity-id>supplierDistributorFrgmt</to-activity-id>
</control-flow-case>
</control-flow-rule>
<control-flow-rule>
<from-activity-id>methodCall1</from-activity-id>
<control-flow-case>
<from-outcome>goAddNew</from-outcome>
<to-activity-id>addnewcompanyFrgmt</to-activity-id>
</control-flow-case>
</control-flow-rule>
<use-page-fragments/>
</task-flow-definition>
</adfc-config>
Kindly let me know what may be the issue and help me to resolve it.
Thanks!
Sankari Kannan

Hi Sankari,
Since after the initial method call, your control flow has the router as its next stop, the //method-call/method/outcome/fixed-outcome can be set to a literal value(go to router) instead of an EL.
And let router decide where to go next(by EL).
Or you can discard your router activity, let the method-call activity decide where to go directly by setting //method-call/method/outcome/to-string to "true". Then the return value of the method decide the next stop.
Todd

Some questions about the limit of memory usage of Adobe flash player in different OS & Web Browser

Hi Adobe experts,
I'm from HP, and now using Adobe flash player making some products about massive data displaying.
For my target, I need to show more than 200 K rows in client web browser, using AdvancedDataGrid.
And that may needs more than 200M to cache the data in Web browser memory space.
So, my questions are:
Does there any memory usage limit in flash player?
Say, if we have 4G bytes of physical memory in machine, in Windows, how much can I use in flash player?
Also, if we have 4G bytes of physical memory in Linux, how much can I use in flash player?
Does it depends on the Web Browser?
Say, is there any difference between different web browsers?
If the limit exists, can we control the limit?
Say, can we define some parameters in the tag in web page to expand the limitation?
Or, can we try to control this limitation by the Flash player management which exists in the Windows Control Panel?
Best Regards
Huang Haixu
+86 18616735091
[email protected]<mailto:[email protected]>

1. Yes. The Toolkit for CreateJS is an extra downloadable extension for Flash CS6. It will publish html and js files that will provide the animation instead of the swf that you would normally publish. The success or failure of the resulting javascript version of your animation is the result of working within the constraints of the toolkit. You are pretty much constrained to using the timeline in Flash for your animations. If you work only in Actionscript, then the output will be very disappointing.
2. Edge outputs javascript, css, and html to give you an animation. The user interface allows you to design within the constraints of what Edge can do. You can preview and adjust and tweek your animation as you work. Edge is an html5 tool. It can create html5 animation. It is not a replacement for Flash. It is something that you can use instead of Flash to embed animation in html.
The problems and benefits of each are unique. Neither is a good substitute to learning javascript, css and html5. If you don't understand the code that is created from each of these tools, you can easily end up with huge, bloated, files that perform poorly. I'm very biased toward actually knowing what is going on. If I need to edit something, I want to be able to go into the code and make a change, not add an additional chunk of code to work around what was there. I don't use the timeline at all, and so nothing that I have will publish using CreateJS. Well, it will publish, but nothing happens because there is nothing on the timeline to translate.
You can download a trial of Flash CS6 and try the Toolkit for yourself. Edge is still in free preview, you can get a copy at http://labs.adobe.com and try it to see how it works.
Also, if you're not using the Greensock Animation Platform with Flash, have a look at that. It has recently been extended to provide Javascript analogues for most of the Libraries. http://www.greensock.com/

A few of questions concerning the Oracle Client

Hi
Firstly, I'd just like to say that what I know about Oracle could be written on a very small postage stamp that had somehow been torn in half and then in half again.
Apologies for the waffle...
One of my roles within our organisation, is to create and deploy application using Novell ZENWorks to our users who will shortly be moving to a purely Windows XP SP2 environment.
Q1-Is the Oracle 8 client fully supported by XP SP2?
Our organisation runs multiple Oracle DB's and up until now, separate application objects have been created for each DB with that DB's settings in it's TNSNAMES.ORA file which is pushed out along with that application object. The trouble is that some users need to access more than one DB which means that they sometimes have multiple copies of the Oracle Client installed, using different TNSNAMES.ORA files depending on what DB they want to connect to.
Q2-Can I either carry out one install of say the Oracle 9 client and have one TNSNAMES.ORA file with all the DB settings in? Or even better still, can I install the client on one of the shared volumes on the server (I realise that I'd have to copy certain files to the workstation) and then get all the workstations to run the client from there?
Q3-Our preferred method of deploying applications is to use MSI's, but for some reason Oracle only supply some kind of primative and cumbersome response file system which I've found often gives random results depending on what the weather is like. Is there a better way of getting the client onto the workstations without having to mess around editing RSP's?
Sorry for posing such potentially dumb questions
James

Q1-Is the Oracle 8 client fully supported by XP SP2?AFAIK Oracle 8 products are no longer supported. Use 9i client instead.
Anyway here is link to certification matrix: http://www.oracle.com/technology/support/metalink/index.html
Or even better still, can I install the client on one of the shared volumes on the server...I guess this won't working. Install Client on each machine and share only tnsnames.ora, or you could resolving tnsnames from OID (LDAP) server.
Is there a better way of getting the client onto the workstations without having to mess around editing RSP's?You could make manual install and record the response file. That responsfile you could use on other machines. You don't need edit anything. Sorry, I can't see anything primitive and cumbersome on RSP. You can choose manual installation or using responsfile, there is not other option.

Some questions on the aironet 1141 aironet

Hi all, I'm a little confused, I have a some questions:
I have several aironet 1141 device all connected to the wired LAN. Can I configure all AP so that create a single network wireless?
Can I configure all AP like DHCP server with same ip pool?
Thaks all for any answer

You can connect the aps to the same subnet. Most cases it is that way. Now you can only have one dhcp though. So if you don't have a dhcp server on the network, you can always have the switch do dhcp if it's capable or one of the AP's.
https://supportforums.cisco.com/docs/DOC-3628
http://itknowledgeexchange.techtarget.com/network-technologies/how-to-configure-a-dhcp-server-in-a-cisco-aironet-access-points/
Sent from Cisco Technical Support iPhone App

Some question about the renegotiation function in SRM Contract (GOA)

Hi All Expert,
We are on SRM 5/4.6, there is a question about the renegotiation function in SRM GOA.
Can we renegotiate the price for some parts in the GOA items with this function ( e.g. Only renegotiate one item in the contract) ?
Will the item price updated automatically after the renegotiation?
Many thanks in advance!!!
Wendrin

Hi Sanjeev,
Many thanks for your help.
One more question, if I add a new item when we renegotiation, will it be transfered to contract and create a new item after that?
Thanks and best regards
Wendrin

Some questions regarding the iPhone app

Hi, I have an iPhone 6 Plus using the app version as I don't own a computer, and am currently on my second day of the 7-day Premium Free Trial period. I just have some questions I'd like to ask about it:
1) I have an extremely large music library, and I'm pleased to see that Spotify has most of what I own. However, for the past several hours it refuses to let me add any new artists/albums/songs to my lists, and when a new album is added, it will vanish from the artist list the next time I turn on my phone. At the same time, I actually tried deleting one of my artists from my Artist list, only to have to reappear the same way. Is this an error, or is there a limit of how much content you can add to your lists?
2) What happens when the 7-day trial period is over? Does it just start automatically billing me, or does it give the option of opting out?
Thanks for your help in advance. :)

Hello , Welcome to the community! :)
I am unaware of a bug like that, is their any chance that it could be fixed by now
If you gave payment info/subscribed via itunes then yes it will start billing you, you stop this by folowing these steps:
Canceling your subscription reverts your account to the Free level.
Go to the subscription page. (Note: If you don’t know your password, go here to reset it.)
Under Subscription and payment, click cancel your subscription.
Select a reason (select Other reasons if you're canceling for a promotion). Click CONTINUE.
Click CANCEL MY SUBSCRIPTION.
Enter your password in the password field. Click CANCEL SPOTIFY PREMIUM SUBSCRIPTION.
Your subscription page now shows the date you will revert to our Free ad-based service. We hope you decide to upgrade again!
Note: If you subscribed through any other company than Spotify, you need to contact that company to cancel. If your subscription is through iTunes, please see Apple's instructions for canceling.
I hope this helped :)

Some questions about the zen visio

Hi everyone ! Im from spain and I have just bought the player one week ago. I have just two questions. The first is if it is possible to connect the player to the computer and the wall socket at the same time (because its really slow charging by usb) and if it does not damge the player. The second question is about the rating system, I find it really interesting but I miss I can do something with it ! I mean there should be another one inside DJ mode to play songs with 5 stars 4 stars 3 stars, 4 or more stars, etc... That would be really fantastic !! And also is it possible to manage the ratings with teh creative media source organizer? I suppose that no because I didn?t find the option... Ok that's all thank you for your help, and what a great player !!
Pedro

You can connect to a home stereo using a stereo miniplug (your headphone connector) to RCA adapter. these are available at any electronics store. you plug the 2 rca plugs into an auxiliary input on your receicver. to play in your car, you can use an fm transmitter. check out my post on accessories, it talks about one i didnt like and the one i replaced it with...
http://forums.creative.com/creativel...essage.id=2079
there is nothing special about ipods, they cant do anything that a creative player cant. in fact, some would argue that creative's do more! but connectivity to any type of stereo system is uni'versal

Some questions on the 5800 GPS

Hi folks
i am debating at the moment whether to upgrade from my N95 to a N95 8GB or the lovely 5800, i prefer the symbian OS so im glad to stay with these two phones. now i had tomtom 6 working fine on my N95 and i know it will work ok on the N95 8GB but the verdict i find on the interwebs is a bit hit and miss as to whether it will work on the 5800. however i am more interested in the Nokia Maps
now as i understand this program is included and you can use the A-GPS built in GPS but can you use an external source? i have a BT GPS antenna and would be happy to use this to avoid paying A-GPS charges is this feature still ok with nokia maps? also is it possible to just run the nokia maps through the built in GPS and not using the A-GPS.
i also just want to clarify something about the maps too, as i understand it comes with the function built in to navigate you point to point but doesnt include voice instruction. you pay extra for that functionaility?
thanks very much folks id love to give the 5800 a twirl as much as i love the N95 i love to try new stuff
Solved!
Go to Solution.

Thanks! I'm planning to head to the shops tomorrow to get 5800 XM.
I never actually tried seeing if there was a visual turn by turn navigation on my friends' phones before because I thought there wasn't one. Hmm. Do you mean the "tracking" option? The very early version of Nokia Maps on N95 had that tracking option (Maps 1.x?), but the new ones don't (Maps 2.0).
Paying for navigation is a bit steep for me after I convert the price to my currency. So I totally understand! I might try monthly though for special events.
Thanks for the kudos. Do skim through the rest of this board section. You might find your answer since 5800 XM uses Maps 2.0 which is available in other phones too. I learnt a lot of info from here.
Yoda is my all-time favourite character.
"Try not. Do or do not, there is no try."
If you found someone's comments helpful or like what that person has to say, please give some Kudos to the post!

Some question regarding the DATAPUMP parameter

Hi,
I am trying to perform a database import using the EXCLUDE=GRANT parameter but I get the following errors
ORA-39002: invalid operation
ORA-39168: Object path GRANT was not found.
What is the correct syntax of using the parameter?
=====================================
In the old import method the ANALYZE parameter was available, what is the equivalent parameter (if any) in DATAPUMP import?
Thanks,
Barry

Barrry wrote:
Hi,
I am trying to perform a database import using the EXCLUDE=GRANT parameter but I get the following errors
ORA-39002: invalid operation
ORA-39168: Object path GRANT was not found.
What is the correct syntax of using the parameter?
=====================================
In the old import method the ANALYZE parameter was available, what is the equivalent parameter (if any) in DATAPUMP import?
Thanks,
BarrySyntax????
SYNTAX?????
Did you ever consider that syntax can be looked up in the very fine reference manual?
=================================================
I don't want to be flippant or rude, but if people want to be professionals in ANY field, the first knowledge they need to acquire is how to locate AND USE+ the fundamental reference materials for that profession. And the most important trait, the one for which they are really hired, is the ability to do independent research, and having a modicum of curiosity that would drive one to do that research. We don't mind helping newbies, and even the most experienced person on this board will run into something they are not familiar with, or occasionally just require a second set of eyes to look at something. But a professional+ needs, above all, a willingness and capability to check the docs. A professional isn't necessarily someone who has all the answers at their fingertips or has a full understanding about every arcane subject in their field. It certainly isn't someone who has an encyclopedia full of memorized answers but little understanding of how it all fits together. It's someone who knows where to find the answers when needed, how to recognize them when he sees them. It's less about knowing than it is about attitude. Everything you asked can be answered in the Oracle Concepts Manual at tahiti.oracle.com. You should bookmark that site.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Some questions about the battery

I have a couple of questions about the battery in general.
Is it normal that my iPod Touch 4G charges very fast? It reaches 60% in only one hour and it's fully charged before it takes two hours. I know this is not bad but I'm just worried. How can I be sure if it's really loaded?
Is it normal that the battery is very quick empty when I'm gaming? For now I'm blaming this due to the quick charge.
Is it normal that for example my battery level is at 30% and when I put on standby or something or close a game, the battery starts rising for approx. 5% even 10% sometimes?
Those are my question, I hope they are clear enough. Thanks in advance.
Regards

1. The tech specs says:
Charging times: Fast charge in about 2 hours (80% capacity), full charge in about 4 hours
2. Heavy use like gaming drains the batery fater then other use. The tech specs say:
Video playback time: Up to 7 hours when fully charged
3.. Yes, the indicate capacity tends to rise after heary draining is stopped. The battery indicator is not that accurate is affected by temperature. Heavy use increases battery temperature and when it decreases battery temperature decreases.

JDev 11g: Task Flows,Rich Client- some questions to the Oracle team

Similar Messages

Maybe you are looking for