Jdev ADF -- Has anyone tried a workspace with 30 - 40 tables?

Hi,
Since we found out that trying to access from one workspace to another is not going to be easily implemented in Jdev, we have to put all the tables and JSPs in one workspace. we will need to create a workspace with 30 - 40 tables and 50 - 60 JSPs. Does anyone have any experience with it? Or anyone has any idea if it is possible. Is the performance going to be acceptable? Any idea is deeply appreciated.
Regards,
Annie

Annie,
We have workspaces with this number of tables (slightly more, I believe), and more than that number of JSPx's
No problems with performance at all. It's quite acceptable.
John

Similar Messages

Has anyone tried BCC 8 with 10.1?

I have and it froze up the whole computer. Had to hit the physical reset button. BCC 8 has always been cranky with FCP 10, but I was hoping the new architecture might have helped with it. Is anybody having any luck using BCC 8 and FCP 10.1?

I'm having no problems using BCC 8 with FCP 10.1
Tried no less than 9 effects and they all seem to be working, although pretty slowly on my 2009 8 core MP.

Has anyone tried the iSight with Skyp for MAC?

MacPro 2.66 Mac OS X (10.4.8) 2G ram.. iSight camera

I use it with a Powerbook G4...so G3 might not be enough...here are the system requirements as listed on Skype's web site:
* Mac computer with G4 800 Mhz processor or faster
* Mac OS X v10.3.9 Panther or newer
* 512 MB RAM
* 40 MB free disk space on your hard drive
* Microphone
* Webcam: Suggested webcams include Apple iSight, Philips SPC900NC, or Logitech QuickCam Pro 4000. Drivers for the Philips and Logitech webcams can be downloaded from http://webcam-osx.sourceforge.net/.
* Internet connection (broadband is best, GPRS is not supported for voice calls, and results may vary on a satellite connection).

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?

I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.

It worked, for about $860 I now have a 1.8 TB xServer

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Apple should really come up with a dual sim card. Has anyone tried to use the dusl simcard adaptor?

I see many ads for the dual sim adaptor, also it is being sold on some flights. Has anyone tried one? Instead of putting better cameras on their iPhones, Apple should really concentrate on making a phone with dual sim cards ( without asking exhorbitant prices) which will make travelling so much easier.

Tell Apple:
http://www.apple.com/feedback/iphone.html

Has anyone tried DisKWarrior V4.2 with Snow Leopard V10.6.3? Does it work?

Has anyone tried DisKWarrior V4.2 with Snow Leopard V10.6.3? Does it work?

Well, there is an article on MacWorld saying there were a lot of changes and improvements to Disk Utility.... and those have a way of impacting things.
I got surprised to have trouble after 10.6.3 with SuperDuper on two different systems, that I am still scratching my head over, but had to use Carbon Copy Cloner and RESTORE in Disk Utility for now, would crash (sent report to both) as soon as SD began.
TechTool Pro 5 is another that sometimes needs to take a couple weeks to see if they need an update and validate against the final shipped build.

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

Has anyone tried M-Audio ProjectMix IO with Logic?

Has anyone tried M-Audio ProjectMix IO with Logic?
I know M-Audio's drivers have had issues, but it looks interesting.

The Fishman Triple Play is simply the best hardware option to date for triggering external MIDI whether hardware sound modules or software instruments.
Having used many MIDI guitar converters since '89, I can say that the FTP tracking is very accurate and velocity dynamics are reasonably wide from soft to loud.
The Triple Play app works in Stand Alone mode in OSX 10.7.5 but not in 10.8.3.
In 10.8.3, you load the Fishman Triple Play plug-into into the I/O of a software instrument track. Open the app and adjust sensitivity, mono vs poly, transposition down or up an octave, etc. Save your set ups as presets which can be scrolled through with the D-Pad control on the converter.
While the GR-55 is an amazing all-in-one solution in a small, light weight package (in relation to the bulk and weight of several actual guitars, basses, amps, fx, etc), it is a poor choice for triggering external sound sources. Whereas I can play "bass" lines on the open E and A strings with my now obsolete Roland GI-20 and RMC piezo equipped guitar without any sense of latency, the GR-55 latency was simply intolerable. Of course one could revert to the old strategy of playing parts an octave higher on the fret board to increase speed and accuracy of tracking. But what about playing "piano" with fretted triads against the open E or A strings???
Think I'm full of hot air? Skim through this: http://www.joness.com/gr300/MIDI_SPEED.htm
I traded my GR-55 towards a JTV-59.
Once set up, you're gonna love the FTP. As I mostly sequence MIDI in Logic, being wireless is incredibly convenient.
Message was edited by: CC#11

Has anyone tried the new retina display MBP with a projector?

I bought a new MacbookPro with retina display online the other day (hasn't arrived yet). I use this primarily for business doing presentations etc. Has anyone tried connecting a projector using the Thunderbolt VGA adapter? Just curious if it'll work.
Thanks

Similar problem. I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

Has anyone tried Thunderbird with Mavericks?

Given that Mail is so completely useless at the moment, has anyone tried Thunderbird under Mavericks?

Hi mmollo22. I use an external monitor with my iMac - Dell U2412 connected via RGB
Mail window on Dell - Reply window appears then almost immediately disappears UNLESS
                                        1) Full screen mode
                                        2) Pre-existing Reply window exists and is visible
Mail window on iMac - Reply window appears on Dell regardless of pre-existing windows. Full screen mode reply
window appears on the iMac.
Others are having Gmail difficulties. I haven't tested mine thoroughly yet, but it seems unaffected, which would also be strange.

Has anyone tried the TV@nywhere with SECAM?

Est-ce que n'importe qui a essayé le TV@nywhere Master avec SECAM?
I am considering living in France, has anyone had any experience with this card using the SECAM TV standard?
Est-ce que j'habiter en France, n'importe qui considère a eu une expérience avec cette carte en utilisant la norme de SECAM TV?

Sorry, no idea.

Has anyone tried to use Labview with VNC

I am trying to use VNC viewer and Labview to remotely code/control labview application. Lots of right clicks dont show up on the VNC. I guess this happens only for Labview and not for other applications. Has anyone tried to use VNC before? is there a workaround?

Just confirmed that each of the above items works properly in our setup, using either WinME or Linux as the controller of the Win98 host. In the 'Connection Options' screen of the controlling computer I have only 'Auto-Select' and 'Emulate 3 buttons' checked. 'Current User Properties' on the controlled computer has only 'Accept Socket Connections', 'Do Nothing', 'Remove Desktop Wallpaper', 'Poll Foreground Window' and 'Poll Console Windows Only' checked. Hopefully one of the above will make a difference.
Matt

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Jdev ADF -- Has anyone tried a workspace with 30 - 40 tables?

Similar Messages

Maybe you are looking for