JDev contra IBM Rational and RUP

Hi,
This might be somewhat off topic, but I really don't know where to post this question.
In the good old days there was Designer with it's methodology that helped designers, developers and a little the project managers too to manage the process of a SW development project.
Later on came JDeveloper. While this is a good implementation oriented design tool with development tool included, there is no methodology to support a development project like RUP. Am I right? Am I wrong?
I would like to hear your oppinion about this topic. Our comapny (<40 app designeres and developers) plans to switch to IBM's RUP and Rational tool. I am no shure if this is a good move, but while in the case of Designer and some years back I could have enumerated pros on the side of Oracle, with JDev I am not that shure and mainly because I do not see the methodoly support behind the tool.
So please post your comment and help me reason for JDev :-).
Thank you in advance.
Tamas Szecsy

And by the way Rational Rose is a dead product - http://www.ibm.com/developerworks/rational/products/rose/
"IBM announces the withdrawal of the Rational Rose XDE product family
However, the Rational Rose components will continue to be supported and will be re-packaged into a new set of offerings"

Similar Messages

  • IBM Rational and SAP NetWeaver

    I've just posted a blog about integrating the IBM Rational software tools with the SAP NetWeaver Application Server:
    /people/kaloyan.raev/blog/2010/06/08/ibm-rational-and-sap-netweaver

    Dear Experts!!!!
    While searching and exploring SDN to solve above mentioned error "NoClassDefFoundError: com.sun.net.ssl.internal.ssl.Provider " found out in some posts to check for classpath. So, we have set the environment variable classpath with jsse.jar file location. After that when we tried, we are getting the same error.
    Can anyone please suggest where to check or set the classpath for jar files to overcome the above issue.
    Thanks & Regards,
    Sharath

  • IBM Rational Purify and Framemaker 8

    Hi,
    Has anyone managed to successfully run an IBM Rational Purify session against Framemaker8?
    It reports an unhandled exception in a module outside my (I think) control:
    RtlUnicodeStringToInteger+0x17d [C:\WINDOWS\system32\ntdll.dll ip=0x7C91AFEE]
    Thanks
    Tommy

    Hi,
    Has anyone managed to successfully run an IBM Rational Purify session against Framemaker8?
    It reports an unhandled exception in a module outside my (I think) control:
    RtlUnicodeStringToInteger+0x17d [C:\WINDOWS\system32\ntdll.dll ip=0x7C91AFEE]
    Thanks
    Tommy

  • How to integrate weblogic 10 server in IBM rational software architect 7.0?

    Hi All,
    Please help me to resolve this issue!!!!!!!!
    I am trying to find it out how to integrate weblogic 10 server in IBM rational software architect 7.0?
    Thanks
    Harshad

    You're right: Weblogic supports Apache web server 2.0 and 2.2 to be a proxy server but you are using Oracle Application Server 10.1.3.1.0 which is based on Apache *1.3* as you can read in "Oracle® HTTP Server Administrator's Guide"
    10g (10.1.3.1.0) - Part Number B28948-01 - 1.1 Oracle HTTP Server Features, right under "Based on Apache - HTTP v1.1 Support" at
    http://download.oracle.com/docs/cd/B31017_01/web.1013/b28948/overview.htm#i1008837.
    As far as I know, the only OHS based on Apache *2.0* is available as a standalone release: "Oracle HTTP Server (Apache 2.0) (10.1.3.3.0) for Linux x86" - 32bit. You can download it from http://www.oracle.com/technology/software/products/database/oracle11g/111060_linuxsoft.html (as_101330_apache2_lnx.zip).
    I've tested it successfully.
    Edited by: Virgil on Jan 15, 2009 3:08 AM

  • Installing Dali plugin in IBM Rational Software Architect

    Hi,
    We use IBM Rational Software Architect as development environment, and we want to use the Dali Eclipse plugin to generate Entities using TopLink. We cannot get Dali installed in IBM RSA though. Since IBM RSA is based on Eclipse, it shouln't be a problem to install Eclipse plugins. We tried installing Help > Software Updates > Find & Install and via copying the files into the Eclipse tree, but neither of the to methods succeeded. The plugin simply doesn't show up.
    Does anyone have a suggestion on what to do to get it installed? We use a separate installation of Eclipse Europa now as a workaround. But I think you understand we prefer to use a single development environment.
    Here's some detailed information about the version of IBM RSA we're using:
    * IBM Rational Software Architect: Version: 7.0.0
    * Eclipse Platform: Version: 3.2.1.r321_v20060921-b_XVA-INSQSyMtx; Build id: M20060921-0945
    Best regards,
    Bart Kummel

    Flex Builder 3 plugin is not intended to be installed on Eclipse Galileo (3.5).
    Zend Studio 7 is based on Eclipse 3.5, and when I tried to install the FB3 plugin, the installation wizard gave me this error:
    "Please choose an existing Eclipse 3.2, 3.3, or 3.4 folder to be extended with the Flex Builder Plugin-ins."
    However Flash Builder 4 it seems that it's working with Eclipse 3.5. I've just installed Flash Builder 4 plug-in into Zend Studio 7.
    Here is a post about this: http://margelatu.org/

  • Experience using Oracle Forms 10g w IBM Rational Clear Case & Build Forge

    Does anyone have experience using Oracle Forms 10g w IBM Rational Clear Case & Build Forge for configuration mgmt?
    Janice

    Hi,
    We had also different Installation (Win2k3 R2 32Bit and 64Bit.).
    1.) For me personally I didn't recognize benefits with 64 bit
    2.) when using Itanium you defenitely have to recompile. We had one Itanium at one of our customers; As Itanium is not x86 compatible you need to recompile on Itanium. it got kicked out and used for another purpose in cause of this and as mentioned the performance weren't so much higher (or in other words not noticeable). Another reason for getting rid of the damn Itanium was that Forms/Reports on Itanium Platform had some annoying bugs; but this was 10.1.2.0.2 maybe in 10.1.2.3 they're fixed.
    3.) If you want to use Itanium you simply have to transfer your fmb/mmb/pll to your Itanium IAS, and use forms and reports compiler which comes with it to recompile them.
    Generally at the moment we suggest our customers to use 32bit.
    just my 10 cents ;)
    regards

  • How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

    Hi
    I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
    The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
    Does anybody know where this file went or can somebody tell me an alternative place to get this file?
    Jacob

    Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
    Hope that works!
    Elise

  • I do not know my apple administrator username and password? How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username/password

    I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.

    iOS is only for mobile devices, so:
    Resetting or changing a password:
    For Snow Leopard or earlier:  http://support.apple.com/kb/HT1274
    For Lion or later:  http://support.apple.com/kb/HT6022
    For Mavericks users:
    http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
    If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101

  • I am having an issue with an IBM site and it was suggested by customer service that I need to install version 3 of Firefox. I cannot find a site to do this.

    I need to download a copy of FireFox 3.o to be able to post updates in an IBM repository. The current 4.0 version doesn't allow me to post or open files in this repository.

    If you just need it for that one site, I believe a better option than replacing Firefox 4 is to install the portable version of Firefox 3 on your hard drive. You can use the portable version for the IBM site and Firefox 4 for other sites. You can get the portable version from http://portableapps.com/apps/internet/firefox_portable - Firefox 3 is listed in the legacy versions section.
    It is best not to use Firefox 3 for all browsing as it is no longer supported with security updates.

  • I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

    I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

    It's "aspect ratio", not aspect "ration". 
    It's what determines whether you have square pixels ("normal") or, if rectangular pixels, what the aspect ratio (width : length)  of that rectangle is.
    It's explained in the Help files.  I cannot go into more detail because you have neglected to provide information about your platform and exact version of Photoshop.
    Example in next post

  • Is Oracle client 10.2.0.4 is supporting IBM Rational Clearquest tool ?

    Is Oracle client 10.2.0.4 is supporting IBM Rational Clearquest tool 7.0.1.1-IFIX02?
    If yes, please provide me valid documenation link.
    Edited by: user11888661 on Sep 10, 2009 10:59 PM

    Any feedback, please?

  • JDev 10.1.3 and Tortoise CVS interoperability question

    Greetings:
    I am using jdev 10.1.3 and when I check out a project from CVS I am not able to update or commit files with tortoise. I used to be able to do this and it was very handy, now when I try to update or commit any files with Tortoise I get the following error:
    cvs.exe [update aborted]: the :ssh2#key='C:\Documents and Settings\troy\id_bull': access method is not installed on this system
    does anyone know how to make this work with the CVS built in to JDEV?
    Thanks
    Troy

    If it use to work I would reinstall Tortoise. The error suggest that the CVS client is not installed.

  • IBM JRE and Webservice (JWSD 1.3)

    Initally, I can run this program in SUN JRE and JBoss. However, I have received some add change requests, therefore, we need to use IBM JRE and existing JBOSS 3.2.3.In addition, I have got a problem using IBM JRE and JBoss 3.2.3.
    Actually, I use Sun JRE to compile those coding and then ftp to the JBOSS 3.2.3. Then, I use IBM JRE to run java application and sent web services request to JBOSS 3.2.3(using IBM JRE).
    The following is a log file in JBOSS 3.2.3 which provides web service.
    2007-07-16 09:17:32,083 ERROR [STDERR] Jul 16, 2007 9:17:32 AM com.sun.xml.rpc.server.http.JAXRPCServletDelegate doPost
    SEVERE: caught throwable
    java.lang.NoClassDefFoundError: com/sun/xml/messaging/saaj/soap/ver1_1/Message1_1Impl
    The following is a log file which is created by Java application
    ERROR - Error in invokeBatchJobAction: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
    ERROR - Error in run: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
    ERROR -
    e.getCause().getMessage(): com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
    Does anyone can tell me what problem?

    It seems you're using Sun implementation (JAXRPC) and this one is looking for Sun SAAJ implementation.
    You could get the same kind of error when using JAX-WS SAAJ (Sun implementation) who in turn require the Sun Xerces impl

  • IBM Rational Application Developer tool

    Hi,
    can u tell me how to assemble a developed EJB Session bean using Assembly toolkit,import it into RAD tool and deploy it in the RAD tool with target server as IBMWebphere serve 5.1.16. I found out some sites relating to all these with webcomponents using ejb but not exactly known the steps followed for EJB component.

    Here is the process I did. My oim version is 9.1.0.2
    1) Created java program in IBM RAD and compiled it.
    2) Created jar file using jar -cvfm class-files command.
    3) Copied the jar file to javatasks folder.
    4) Tried to use this jar in adapter then got "Failed because null" and sometimes "Server could not load class" messages. most of the time i am getting "failed because null" message.
    Compiled using javac command also without using this tool and created still no luck....

  • IBM's and SAP's

    Hi Experts,
    So, IBM is having their own specification for SOA and SAP is also having its own specification for SOA.  What is the main difference between IBM's and SAP's specifications and their implementations side.  IBM has its own stack for SOA is SAP has its own stack for SOA?
    Thanks and Regards
    Viswanath

    Hi Vishwanath,
    Nice and interesting query .
    Go through this link.
    http://publib.boulder.ibm.com/infocenter/ieduasst/v1r1m0/index.jsp?topic=/com.ibm.iea.wsapiw/wsapiw/5.0/IBMandSAP_Intro2SAP_tech/P03_SOA_IBM_ESA_SAP_Khirallah/player.html
    It doesn't provide all the information but is quite useful.
    Regards,
    Piyush

Maybe you are looking for

  • Install Arch on esata

    Hey Folks, I am pretty sure it should be no problem to install arch on an eSATA drive.  But, what I am not sure about is how to handle grub.  The computer is already running fedora with gurb.  Would you recommend not installing grub at all at then en

  • Depo sales returns --Credit memo issue

    1.Sales Order (Return Order) 2. Delivery (Return Delive PGR) 3.Incoming Excise Invoice using Transaction J1IG with referenc to return Material Document then RG23D  will update. 4. Credit memo -- here only excise values are not copying from return sal

  • IDOC inbound program !

    Send me some link to write IDOC inbound program !

  • Create horizontal master page?

    How do I create a horizontal master page? According to the Adobe documentation that I've found, the way to do this is in Document Setup. But I don't want the entire document to be horizontally aligned. I just want one page to be horizontally aligned.

  • User exit during project creation

    Dear ALL, I want to know is there any user exit at the time of project Creation  ( CJ20N / CJ01). Actually the requirement is the system should restrict the user if the user selects  the wrong project profile during the  initial screen and not during