JDeveloper 10.1.3.1 J2EE version

Does anyone know which version of J2EE comes with JDeveloper 10.1.3.1?
Thanks.

Hi Shay,
Thank you for your interest...
I have tried wit hthe following configuration options:
Connection Name: DBTest
Connection Type: Oracle (JDBC)
Username: User
Password: UserPassword
Role: N/A
Deploy Password: Unchecked
Driver: Thin
Host Name: IP Address of my DBHost
JDBC Port: 1521
SID: ORCL
This configuration has been tested in previous versions of JDeveloper and it works.
The RDBMS is an Oracle 9i DB

Similar Messages

JDeveloper 11.1.2.0.0 Version Application wizard : File Backup Error

hi
As shown in the scenario (sc1) screencast at http://screencast.com/t/GA7OcgYZ
the JDeveloper 11.1.2.0.0 Version Application wizard can fail sometimes, showing a "File Backup Error" dialog, with the message
"Failed attempting to back up imported resource
D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\Model.
Check that there are no file system explorers viewing files in this location and that none of the files are open in other applications before resuming."
This even occurs when there are no other processes (like Windows Explorer or an editor) using/locking the file.
It should be possible to reproduce the behaviour using the example application
at http://www.consideringred.com/files/oracle/2011/VersionAppLockedIssueApp-v0.01.zip
which is really nothing special I think, so it might also reproduce using another application.
First open the application and also open the file "browseEmployees.jsf" in design view.
After that, as it seems, the Version Application wizard fails.
Note that it might be relevant that I am using Windows 7, as I can imagine that this could behave differently when using JDeveloper on other operating systems.
Also note, if I try to ZIP the application folder (instead of using the Version Application wizard) after opening the file "browseEmployees.jsf" in design view, I get a message like "WARNING: The process cannot access the file because it is being used by another process.
: D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\.data\00000000\je.lck ",
as can be seen in the scenario (sc2) screencast at http://screencast.com/t/rFiL47Bil
As it seems that the Version Application wizard has managed to commit the source files, one workaround could be to checkout the source in another location and continue working there.
Other suggestions to avoid this issue, or deal with it, are welcome.
questions:
- (q1) Can this "File Backup Error" behaviour for the Version Application wizard be reproduced?
- (q2) How can this "File Backup Error" behaviour for the Version Application wizard be explained?
many thanks
Jan Vervecken

fyi
Today I noticed that there is a My Oracle Support note about this:
- note id 1353389.1 , "In JDeveloper11.1.2.0.0 the Version Application Wizard Failed with the Error: File Backup Error "
Its "Solution" section currently says:
"The problem is still investigated by development.
But there is a possible workaround for Bug 12912410 by unchecking the checkbox 'Perform Checkout' in step 5 of 6 in the wizard screen. "
regards
Jan

BPM standalone and J2EE versions

What is the diffrence between BPM standalone and J2EE versions
and
What are the advantages of Using J2EE Version over standlone?
In configuration document it is mentioned that we need to deploy wlj2eedeployer.ear on weblogic server.
Why this deployment?
Thanks

Depending on your needs, the Engine can be deployed using two different implementation styles.
Standalone Oracle BPM Enterprise Engine
Oracle BPM can be deployed in a standalone environment running on a JVM. This is the original version of the Engine and has been around for 10 years.
The benefits of deploying processes to Enterprise Standalone are:
<li> It does not require an application server J2EE container to run. This means a lower cost of entry if you do not already own WebLogic or WebSphere J2EE application servers.
<li> It is simple to install and administer.
Enterprise Standalone uses a simple active/standby failover mechanism. When the active engine starts, it immediately registers in the Oracle BPM Directory that it is the primary engine. When the standby engine starts on another machine, it sees that another engine has already registered as the active server in the Oracle BPM Directory. Since the active engine is already up, the standby knows that it needs to ping the primary engine periodically to ensure it is still up. If the standby engine fails to get a response from the active engine, the standby notifies the Directory that it is now the active engine. When what was previously the active primary engine restarts, it notifies the Directory that it has restarted, sees that another server is now the primary and then starts as the secondary.
J2EE Application Server Oracle BPM Enterprise Engine
Oracle BPM Enterprise engines can also run on a J2EE application server within WebLogic and WebSphere containers.
Oracle BPM Engines running on a J2EE Application Server support active clustering. This means that as loads increase over time, new nodes can be added making the environment more scalable over time.
With the J2EE Application Server environment automatic failover is automatically provided across nodes.
Finally, in answer to your last question - the deployed wlj2eedeployer.ear is useful because this lets you stop and start the Engine and deploy projects from the simple (ok - somewhat simple) Oracle BPM Process Administrator tool.
Hope this helps,
Dan

JDeveloper 10g 10.1.3 J2EE Edition Developer Preview download

I was unable to download JDeveloper 10g 10.1.3 J2EE Edition Developer Preview. After passing syrvey, i'm gotting : "Sorry, this page was not found. (ErrorDocument 404)"

I just tried to do this and got to the download page. Can you try again?

Where can I download a light SAP J2EE version?

Hi,
Is there a light J2EE version?
Where can I download it?
Thanks,
Eylon
Message was edited by: Eylon Steiner
http://www.eshmore.com
Message was edited by: Eylon Steiner

Hi Eylon,
please check the following URL for downloads within SDN
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">sap NetWeaver Sneak Preview and Trial</a>
Kind Regards
Thomas

Oracle Retail J2EE version

Hi All,
Can any one advise me Java version used in RIB 13.1 & RPM 13.1. (Java version and J2EE version). Is Annotations been used in the same?
Regards,
SK

check e.g. document 1081376.1 on oracle support:
RIB 13.1.1 - Oracle Application Server 10g 10.1.3.4
RPM 13.1.2 - Oracle Application Server 10g 10.1.3.4
The Oracle Application Server (this is not BEA Weblogic) provides the containers to run the J2EE applications in.
Please see relevant OAS version's documentation for the applicable J2EE version.
Best regards, Erik Ykema

Weblogic 12c - J2EE version

Hello,
I am migrating our J2EE 1.4 apps from Websphere to Weblogic as part of an evaluation.
I am trying to deploy a J2EE 1.4 application into Weblogic 12c. I see strange classloader exceptions. Is this because Oracle 12 c does not support J2EE 1.4?
If yes, can you please help me on the following :
1. Where can I find the Weblogic servers vs supported J2EE versions?
2. What are the version of Weblogic app servers are suitable for J2EE 1.4?
3. I noticed Weblogic 12c has a feature called 'SmartUpgrade'. I am exploring if this will help me anyway.
Thanks in advance,
Rajesh

Hi Lawrence,
I believed backward compatiblity will be present. We don't use weblogic APIs, as this is the first time we are moving to Weblogic. The Error in the sever_0.log file is as follows:
When processing WebService module 'XXX-stp-web.war'. Failed to load servlet Class: com.XXXsolutions.stp.manager.web.ABCManagerServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: com.XXXsolutions.stp.manager.web.ABCManagerServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
When processing WebService module 'XXX-stp-web.war'. Failed to load servlet Class: com.XXXsolutions.stp.manager.web.ABCManagerServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: com.XXXsolutions.stp.manager.web.ABCManagerServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
<03-Jan-2013 15:40:58 o'clock GMT> <Error> <javax.enterprise.resource.webcontainer.jsf.config> <BEA-000000> <Critical error during deployment:
com.sun.faces.config.ConfigurationException:
Source Document: file:/C:/Projects/wlsdomain/servers/Server-0/tmp/_WL_user/XXX-stp/isz0wh/war/WEB-INF/faces-config.xml
Cause: Unable to find class 'com.sun.facelets.FaceletViewHandler'
     at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:273)
     at com.sun.faces.config.processor.ApplicationConfigProcessor.setViewHandler(ApplicationConfigProcessor.java:541)
     at com.sun.faces.config.processor.ApplicationConfigProcessor.processViewHandlers(ApplicationConfigProcessor.java:861)
     at com.sun.faces.config.processor.ApplicationConfigProcessor.process(ApplicationConfigProcessor.java:334)
     at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:114)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: com.sun.facelets.FaceletViewHandler
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
     Truncated. see log file for complete stacktrace
Thanks,
Rajesh

J2ee version 1.3 - 1,4 problem

I have some code which uses j2ee version 1.4 but the server I will run this on, uses j2ee version 1.3. This means I need to rewrite some code but there is one part, I don't understand and don't know how to rewrite this.
Maybe you can help me with this or point out to me where I can find more information about what this code does, so I can find out how to re-write it. This code gives me an error on j2ee version 1.3:
NodeList nlist = message.getSOAPBody( ).getChildNodes( );
getChildNodes() is unknown by j2ee jar version 1.3.
In my opinion this should be re-written and some code afterwards as well. I think the following lines of code has to be written different:
NodeList nlist = message.getSOAPBody( ).getChildNodes( );
for ( int i = 0; i < nlist.getLength( ); i++ )
String strName = nlist.item( i ).getNodeName( );
if ( strName.endsWith( "CreateSession" ) || strName.endsWith( "CreateSessionImpersonated" ) )
noNeedToAdd = true;
break;
Is there anyone here that can help me in the right direction?
Any questions, just ask. Thank for any help !

Kapil,
Please let us know if you still need help with this post.
Thank you.

J2EE version problem.

I created a struts application using Eclipse IDE by choosing J2EE version1.4 and struts1.2.
But this application is not working when I choose J2EE version as 1.3 and struts version as 1.1.
Can any one clarify about this issue.
Thanks in advance.
Regards
Ganga Krishna.

hi,
I've had the same problem but with j2ee1.3. Where the problem lies is the version jdk you are using. I'm not sure which version you need but it makes a big difference and that's why your compiler will not recognise 'j2ee -verbose'.
j2ee1.3 is guarenteed to work with jdk1.3 but nothing newer, so basically change your installation of jdk1.5 to 1.2 or 1.3 ect and change the JAVA_HOME var to match:)
hope this helps
mat

[svn:bz-trunk] 23072: - fixed failing test on J2EE version based on . Net changes.

Revision: 23072
Revision: 23072
Author:   [email protected]
Date:     2011-10-20 06:59:14 -0700 (Thu, 20 Oct 2011)
Log Message:
- fixed failing test on J2EE version based on .Net changes.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/Boolea nTypesTest.mxml

The first thing I would do is go the the CF administrator and
make sure all of your DEBUG information is being displayed. By
default, some isn't. A lot of times when you get a .net error and
it tells you nothing, go to the area below Execution Time and there
is an exceptions area. That is usually where .NET errors are
returned (system.nullReferenceException for example).
When passing in strings, I typically assign it to a variable,
then pass in the variable. It shouldn't matter, but sometimes I
have run into issues with passing a string in. In your second
object, look at the date object. The Coldfusion date object and the
.Net date object are not the same. Hope this helps.

How to find the jre and j2ee version on RAD?

How to find the jre and j2ee version of RAD 6.0?

Hi Zhenglin,
You meen to say we have to create two custom fields, one each for the latitude and longituude. Once created, how do we upload the latitude and longitude based on address could you please expalin by giving some sample code.
Thanks in advance.
Thanks and regards,
Deepika C

J2EE versions supported by Weblogic 11g, 12g

Hello,
Can you please direct me to a link that I can find what versions of J2EE or Java EE are reliably supported in 11g and 12g.
Thanks,
Raj

I'm sorry, I thought by mistake that you were asking about Java SE, so I sent you info about Java SE in my previous post. Here is the information about Java EE:
http://www.oracle.com/technetwork/java/javaee/overview/compatibility-jsp-136984.html
http://www.oracle.com/technetwork/java/javaee/overview/compatibility-javaee5-jsp-141098.html
(Just find "WebLogic" on the page and open the link "Tested configuration" below it).
As you can see WebLogic 12c is Java EE 6 compatible and WebLogic 11g is Java EE 5 compatible.

JDeveloper 11.1.2.1.0 versioning tip needed...

Hello folks!
I looking for something handy on JDeveloper 11.1.2.1.0
We just start using versioning with trunk and branches etc. Right now when I'm confused where I'm working in, I go to Versioning > Switch in order to make it clear to myself in which branch (or trunk) I work in.
Is there any easier way to have this information always on top? (ie a panel, or any hint showing on the screen all the time).
Thank you very much. If there's such a feature that would made me faster and more confident.
Best Redards
ps. Happy new year to all of you. I truly wish you a very productive and blessed year.

Right click a file in the Application Navigator -> Versioning -> Version Properties. In the resulting dialog it'll show you the SVN source of the file as well as the path of the working copy file. Unfortunately the dialog can be a little small to show your full path but what you can do is click in some of the fields and mouse scroll the path to the left/right (if that makes sense).
Is that what you were looking for?
CM.

SAP J2EE version

Hi all
I am in the process of installing EP 6.0 from Netweaver04 DVDs. As prerequisite I installed SAP Web Application Server Java 6.40 on Windows. But when launched J2ee server it shows it as SAP J2EE Engine 6.30 . As per my guess I should see SAP J2EE 6.40. I thought Netweaver 04 comes with SAP J2EE 6.40. Correct me if I am wrong.
2. How to check SP level for J2EE. As per the administrator tool parameter SAP_J2EE_Engine_Version shows 6.30 Patch Level 66061.37. What does it mean? How to interpret this? I need to upgrade from Sp3 to Sp4 before installing portal.
Thanks

Hi RG,
About the Java part of the SAP NetWeaver there is no fundamental difference between 6.30 and 6.40 (in contrast to the APAP part).
So, SAP J2EE Engine up to SP3 is version 6.30 and from SP4 becomes 6.40.
There is a note where you can find what SP is your engine knowing the patch level the note number is 701385.
You can read the information about the version from this file:
"...j2ee/cluster/server0/version.txt" which is located into the J2EE Engine installation directory.
If you cannot see the note 701385, here is a snipped:
The SP number on the market place is just a counter assigned at publication time, i.e. later. That's why the patch number is not written into version.txt.
SP____BuildNumber___TimeStamp________ReleaseDate
00.........48385...........16.04.03 20:43/GMT.....06.10.2003
02.........56692.32......24.07.03 13:16/GMT.....08.10.2003
02-PL1..67206.39......12.01.04 02:21/GMT.....23.01.2004
03.........66061.37......11.01.04 21:06 GMT.....11.01.2004
04.........71379.311.....25.02.04 23:16 GMT.....26.02.2004
05.........75145.313.....19.04.04 19:49 GMT.....19.04.2004
06.........77737.313.....03.06.04 19:38 GMT.....09.06.2004
06-PL1..80393.311.....17.06.04 19:34 GMT.....18.06.2004
07.........83087.313.....29.07.04 19:46 GMT.....05.08.2004
08.........84589.313.....06.09.04 19:48 GMT.....09.09.2004
09.........87037.313.....19.10.04 19:52 GMT.....22.10.2004
(The notation "xx-PLx" in the column "SP" stands for SPxx Patch Level x)
I hope this helps
Best regards,
Lyubomir

J2EE version

Dear all,
I am new user of j2ee technology. Here, I have sveral questions:
1. Does j2ee have the HP-UX version? If no, can j2ee Solaris version can be installed on HP-UX?
2. If I installed j2ee, do I need to install the Tomcat to support the servlet and JSP with Apache web server?
3. Before installing j2ee, I must install j2sdk first, right?
4. J2ee must be used together with Web server, is it correct?
Any reply will be greatly appreciated.
Have a good day!

1. J2ee should be able to act as an Web server, which
can support JSP, servlet, JavaBeans, and http
protocol, is this understanding correct? If it is
correct, it means that I don't need to install the
additional Web server such as Apache, Tomcat (for JSP
and Servlet) on my application server because I have
installed J2ee on it. Please give me an answer.Once you install J2EE RI, you need no other software (except those for database connectivity).
2. Can Tomcat be regarded as a stable web server which
supports JSP and Servlet? If so, it also means that I
don't need to install additional Web server software
such as Apache if I have installed Tomcat.Tomcat is stable, Sun includes it in the RI -- the reference implementation.
3. Must Tomcat be combined into Apache server to run?
If separatedly started up, I found that Tomcat is the
primary program to reponse the http request. It looks
that now Apache doesnot in use.Tomcat need not be combined with Apache. Running them together is a good thing to do if you have a lot of static content, though. Tomcat is a servlet engine and a Web server, with the emphasis on the servlet engine. Apache performs better serving static files (e.g., html, jpeg, gif, Flash animations).
4. If J2ee is installed on a physical server and our
Oracel database is installed on another physical
server, is it possible for us to use JSP and Servlet
technology of J2ee server to access the database
server? Do we need to install additional software on
database server for this communication?No additional software is required on the database server. You have to install Oracle JDBC drivers on the J2EE server.
5. As for above question 4, I actually want to know
the role of the JDBC. Can only JDBC build the
connection between application and database servers?I don't know of any other database connectivity API.
6. Can I get a suggestion for choosing the server
type: HP-UX or Sun Solaris as our application server,
on which J2ee and related web server Apache (if
needed) will be there?It really depends on what hardware have or plan to have. I wouldn't really prefer one over the other. More bangs for the same buck is what I would go for.
Mind you that though J2EE RI is good for training and exploration, it's not a production grade server. It is a reference implementation and as such it only claims to be a correct implementation of the many specs that constitute J2EE. It lacks many optional operational features that vendors implement.

JDeveloper 10.1.3.1 J2EE version

Similar Messages

Maybe you are looking for