JDeveloper 10.1.3.2.0 update authentication problem

Hi!
What port should be opened to authenticate on OTN?
I'm using "Help -> check for Update" feature of JDeveloper. When I'm being asked to log in to OTN the "attempting to connect" message appears. After some delay the form with login and password is displayed again.

Hi,
if you connet to OTN via a proy server, make sure this is configured in the JDeveloper preferences for browser and proxy settings. The username and password is your OTN account
Frank

Similar Messages

  • 10.4.6 update authentication problem

    As I have read there are several who have had AFP problems after the 10.4.6 update. I was unable to access or start AFP after the update nor am I able to login over remote desktop. I tried removing my sharepoints as per the helpful suggestions but when removing my sharepoint which formerly hosted my user folders it asks me to authenticated to LDAPv3/127.0.0.1 as a domain administrator. I tried this to no avail using the proper name and password (I know becase WGM let me in just fine). I decided to demote to standalone using the dropdown in Server Admin then would remove the share but it is still asking me to authenticate. Luckily this is a test server and only had 3 accounts on it but can someone point me in the right direction?
    To recap: AFP will not start or restart, Remote Desktop access gives me an authentication error with working pw, and I cannot remove a sharepoint from a non-existent directory

    Turns out it was bad ram causing some of the trouble and trying to fix it only caused more of a mess.

  • Cisco ACS 4.2.1 authentication problem

    We are using cisco ACS 4.2.1 on windows 2003  to authenticate  with windows 2003 Actice Directory. We have update Active directory server windows 2008 version. We have checked the configuration of ACS on windows database and no problem but we can't see in ACS dynamic user. I have authentication problem ACS 4.2.1 to Windows 2008 R2 active directory.

    Hi there,
    There is a section in the ACS 4.x where you can define if the ACS should show the dynamic users or not, make sure that this option is unchecked, for this go to External User Databases/Unknown User Policy/Configure Caching Unknown Users
    Also if you are facing authentication issues with ACS 4.x and Windows 2008 R2, you may want ready my previous answer.
    Let me know if this helps.

  • WiFi Authentication problem

    I have an iMac, and iPad, a Blackberry (forgive me) and Airport for my WiFi all of my pieces are working fine with my WiFi.  I had guests over the other day and we could not allow my guests iPads or iPhone to sign onto my network.  I bought my dad a generic tablet to use for solving cross words, etc., and I cannot sign into my own network.  No opportunity exists to put in a password because it just reads "Authentication Problem".
    No opportunity exists, therefore, to enter the password.  Signal strength is excellent, Securty is WPA2 PSK, I touch connect and it says Saved Secured with WPA2 and then goes back to "Authentication Problem."
    I've unplugged (and plugged back in) both the Airport / router and Internet Service provider's modem. I've rebooted my iMac and the new generic pad 3 times each. 
    I had 2 networks one for me and one for guests, can't get into either, identical problem. I can see all of the neighbour's networks and they're all locked and say secured with (various WPA/WPA2, etc., just mine says Authentication Problem.  I plugged the tablet into my iMac and it's functioning well.
    I now deleted the guest network and can't open a new network. 
    I've triple checked my passwords, hand written and in the Key Chain.
    I've checked my Apple ID (I'm able to get into this forum).
    Both my iPad (purchased May 2013) and BlackBerry (received free July 2013) signed in without any problems.
    I cannot see why I can't get into my network ~ any ideas?

    Hello,
    Hmmm..."problem"...pretty hard to understand. Can you provide more details? What exactly do you try? What exactly happens at each step of what you try? What is the exact and complete content of any error messages presented?
    Please remember that we can't see you nor your device. We have only your words to help us understand your situation, and such understanding is the natural prerequisite to providing you with any useful guidance.
    Thanks and let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do I correct LG Lucid wifi authentication problem

    LG Lucid was working fine until few days ago when it stopped connecting to all available wifi networks.  It still ID's them, goes thru authentication process, & then provides error message "authentication problem".  I think there was aa phone update about the same time things stopped working.  Help please.

    I know this is an old thread, and would hope you've gotten connected to your WiFi by now, but you may want to check your router settings. If you have some sort of device filtering set up, your for may not be recognizing your phone since the update.

  • SQLNET authentication problem!

    Hi,
    We have a setup in which the database server is running on a 'XXX' domain and all the clients are running in domain 'YYY'.
    On the client, if following is the setup, then the clients face ORA-03113 after around 45 to 90 minutes of idle time.
    SQLNET.ORA
    NAMES.DEFAULT_DOMAIN=YYY
    TNSNames.ORA
    DBName.YYY = (..........
    Note: This is not happening with all the clients in 'YYY' domain.
    Now, we thought this was a domain authentication problem and removed the DEFAULT_DOMAIN setup from the client. Still the client faces ORA-03113.
    As a part of trial, we moved one of the machines which was facing the problem to the domain of the database server and the error is gone.
    But, due to obvious reasons, it is not possible to move all the clients to the domain of database server.
    Is there any way to get around this problem?
    Why is it that only some of the clients are facing this problem?
    Why is it that the error occurs only after idle time and not during work?
    Do we need to set NAMES.DEFAULT_DOMAIN=XXX at client? (I apologize for this question but I am really confused with the matters now)
    Addition info: The database server is Oracle 10.1.0.2.0 and clients are ranging from Oracle 8.1.6 to Oracle 10.1.0. And the errors occur on clients with any version of Oracle.
    Please help us out in this regard.
    Thanks in advance,
    Satish

    I have gone thorugh the Action suggested for this oracle error.
    If problematic machine is shifted to the domain XXX, error is gone,Do you shift physically to some other network?? if yes then there might be a problem with your network. The machines which are disconnected, might be on the same network channel or switch which is creating some problem in your network. this is only luck that your failure occur when there is no activity from that client which is disconnected.
    Shift the places of problem facing client and non-problem facing client with each other and then check. It will clear the mind about the netrowk problem
    Regards

  • Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

    Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
    There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
    Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
    Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

    as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

  • Webservice authentication problem

    Web Service Authentication problem
    Posted: Jun 17, 2005 3:32 PM        Reply      E-mail this post 
    Hi
    I have created a portal service and exposed this service as a webservice. I am consuming this webservice in webdynpro. Portal service contains 2 simple methods putdata() and getdatat().
    When i access the webservice i am getting the following error.
    "javax.xml.rpc.soap.SOAPFaultException: The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.GlobalData or the service was not found"
    My Enterprise portal server is configured for SSO to back end R/3 system. I have checked for portal service availability and it is fine.
    My Webdynpro and Portal are running on different machines. EP is running on AIX with SP11.
    Any help please.
    Regards
    NagaKishore V

    Hi Shahab,
    Can you reproduce the issue if you create 2 applications. One that exposes a secured web service and the other one the one, consumes the web service? This would help to isolate the issue and move forward in case is a bug.
    Thanks,
    Juan Camilo

  • 10.4.11 combo update install problem

    Has anyone else had trouble installing the combo update from 10.4 to 10.4.11?? Mine almost finishes and says it encounters an unknown error and cannot finish the install. Says it moves the update to trash and says try again from the finder...
    HELP!!

    Updating
    Certain steps appear to minimize the risk of an update producing problems.
    Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
    Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
    [Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
    You can also go to the step of booting into safe mode to do the install.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
    Repair permissions again afterward.
    It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
    The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
    Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
    [BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
    [Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
    [Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

  • Authentication problem - solved, but maybe a bug in Mac OS X?

    Hi,
    I've a rather small installation with only a handful of users configured on a Mac mini (Mac OS X Server, 10.6.8). All of them use the mail, calendar and addressbook server on the Mac, nothing more. They use it with Mac, iPhone and iPad. Everything worked fine for months but suddenly all of them were faced authentication problems: it was not possible to login on the imap server, the calendar server, the addressbook server. It was possible to login using the admin account on the server directly. Moreover, all users disappeared from the workgroup manager, however they still were available on the servers LDAP server and findable using ldapsearch.
    First, I used to completely restart the server to solve the problem, but it reappeared after only few hours again.
    Second, after understanding more about the authentication process, I found the "killall DirectoryService" was sufficient to solve the problem, but it still reappeared after few hours.
    Then I found the, once the problem occured, there was nearly no more communication to the local LDAP server on port 389 on localhost. When everything was working fine, the was a lot of such communication, including queries for usernames, when a login attempt was made. I started a "tcpdump -n -i lo0 port 389" and waited for the problem again. After the problem occured, I found in the pcap files that there were a few final query attempts, actually attempts the open a port 389 TCP connection to the slapd running on localhost, which were answered with a TCP RST. Then, no more attempts were made until l restarted the DirectoryService. Using the logfile of the slapd I found that this happened exactly at the time the slapd was stopped and restarted. And - surprisingly for me - stopping and restarting the slapd happened exactly once an hour.
    I then found that it happened exactly at the time the time machine backup process was started and indeed it was possible to trigger the event of restarting the slapd by manually starting a time machine backup.
    (Indeed, I switched my backup strategy from SuperDuper to time machine the other day and maybe that was the time the problem occured for the first time. I know that time machine is not considered as the best backup strategy for a server but I wanted to try on my own.)
    Google helped my to find a hint that time machine will actually stop and restart slapd - which is a generally a good idea, since otherwise a backup from some open database files would be made, which could work but may fail. So, I thing, someone of the developers thought about that problem too and has considered time machine for backups of a server.
    However, a not running slapd can not answer queries from a DirectoryService and a stopping or starting process might indeed end up with TCP SYNs answered with TCP RST.
    My solution was to disable time machine again and from that time the problem does not occur again.
    I'm wondering why the DirectoryService process isn't starting to query the slapd again after a failed connection. Isn't this a bug? After this experience I consider time machine as not only the not preferred backup solution for a server but as completely incompatible with Mac OS X server - although, as I said, it seems that someone thought about backing up the LDAP database using time machine.
    (On a Lion server this problem does not occur, the slapd will not be stopped and restarted when time machine is running. Moreover, I saw a com.apple.slapd.start notification in the slapd.log ... maybe this tells DirectoryService to try again.)
    Cheers,
    Wolfgang

    Another problem I found with the MacOS X key bindings: the 6 key doesn't work!
    In the config that ships with SQL Developer, I found this:
    <Item class="oracle.javatools.util.Pair">
    <first class="java.lang.String">DOCUMENT_6_CMD_ID</first>
    <second class="oracle.ide.keyboard.KeyStrokes">
    <data>
    <Item class="javax.swing.KeyStroke">6</Item>
    </data>
    </second>
    </Item>
    which should be:
    <Item class="oracle.javatools.util.Pair">
    <first class="java.lang.String">DOCUMENT_6_CMD_ID</first>
    <second class="oracle.ide.keyboard.KeyStrokes">
    <data>
    <Item class="javax.swing.KeyStroke">meta 6</Item>
    </data>
    </second>
    </Item>

  • Wifi Authentication Problem in Lenovo K900

    Hi,
    I am able to connect to wifi at home network. And when I try it at office it is showing Authentication problem and "Not in Range". The password and everything is correct. All my colleagues are able to connect with the same password. I searched online for the solution and there are many other lenovo tab and phone users facing the same problem and I am unable to find the solution. Can anyone resolve this issue and give appropriate answer for this.

    This is the first time I'm hearing this issue, I'm also an K900 user but this never happmed to me or my other friends.
    Are you sure that's the right password, maybe its case sensitive, because this bug is not present in K900.
    Facebook Profile I'm a carefree type of guy but always there to help, so if you have anything to ask don't hesitate.

  • SQL Server 2005 Update mechanism problem

    Hi Gurus,
          We're faced with one SQL Server 2005 update mechanism problem. Here is my problem:
          According to our requirement, an add_on interface program is designed to execute creation of production order by calling Bapi.
          There are 3 steps in this add_on program:
          Step 1: Create production order
          Step 2: Change the information of production.
          Step 3: Some other
          After the step 1 has finished immediately step 2 is called, Howerver the information which should have inserted into database table couldn't be found from database. (Maybe because the time between two steps is too short to finish inserting)
          In order to ensure the complete of the transaction, before the step 2 executed, the information in step 1 should have inserted into database.
           Is there any solution to solve this problem?
           I guess whether there is any parameter which control the time of writing buffer into database...
    Any advice is appreciated.
    Thanks & Best Regards,
    Derek Yang

    Hi
    I have the same problem, but that post didnt help me
    This is the error I have:
    My snapshot agent hangs.. waiting for a response from the server.. and timeouts.
    This only hapens for a publication that has a filter based on HOSTNAME()
    The other publications work fine
    Error messages:
    Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
    Command Text: sp_MSsetup_partition_groups
    Parameters: @publication = XXXXXXX
    Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
    at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
    at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
    at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.SetupPartitionGroups()
    at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
    at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
    at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
    at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
    at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: -2)
    Get help: http://help/-2
    Server XXXXXXXXX, Level 11, State 0, Procedure , Line 0
    Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Source: MSSQLServer, Error number: -2)
    Get help: http://help/-2

  • Update/Insert Problem with Oracle Warehouse Builder

    Hello,
    i have update/insert problem with owb.
    Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
    My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
    Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
    Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
    I look forward for your replies :)

    Hi
    thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
    My Testscenario
    1. Load the data from source table about the staging area to data warehouse table: Check - it works!
    2. Change one data record in source table
    3. Load the source table with changed data record once again to staging area: Check - it works!
    4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
    What can yet now still be wrong or forgotten? Any ideas?
    *By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
    I look forward for your answers :)

  • WLC 5508 WPA Authentication Problems

    Hello,
    We have a WLC 5508 with 7.4.100.0 Firmware.
    We are using 1141 and 1142 APs and we are having authentication problems with clients that are connecting to our WLAN with WPA+AES autentication. The clients receive in her laptop a password error, and we receive the following log in wlc:
    Client Excluded: MACAddress:f8:f1:eb:dd:ff:cd Base Radio MAC :08:ad:dd:76:4d:30 Slot: 0 User Name: unknown Ip Address: unknown Reason:802.1x Authentication failed 3 times. ReasonCode: 4
    The strange thing is that the problem is solved restarting the Access-points.
    Anyone had this problem previusly?
    Thanks in advance.

    I made the configuration using the Cisco Recommended settings, the strange thing its that the users connect normally, until they starts with authentication problems. I restart the access points and the problem its solved.
    Cisco Recommended  and not recommended Authentication Settings
    Security encryption settings need to be identical for WPA and WPA2 for TKIP and AES as shown in this image:
    These images provide examples of incompatible settings for TKIP and AES:
    Note: Be aware that security settings permit unsupported features.
    These images provide examples of compatible settings:

  • Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

Maybe you are looking for