JDeveloper 10.1.3 Hangs for
I am facing issue with jdeveloper 10.1.3 wherein it just hangs eating 99% of CPU and only way out is to kill it using Task Manager.
Steps to reproduce the problem:
o Using Preferences -> Code Editor -> Font
Change the editor font to any font other than 'Courier New' or 'DialogInput',
I tried using 'Verdana' and 'Lucida Console'(which is Fixed Width)
o Restart jDeveloper
o Open any jspx file in design mode, select any component eg InputText
o Goto source editor, try selecting the complete line or just a work by double clicking on it and press 'Del' or 'Ctrl+X'
o jDev hangs
Environment:
Jdeveloper 10.1.3, Windows XP Prof, Pentium 4, 1 GB RAM
Just applied the Jdeveloper 10.1.3 Service Update 5 and seems that this issue is resolved... thanks for your help...
regards - rutwik
Similar Messages
-
Why does Pages 09 hang for 1min30sec? The spinning ball, etc...
I am using Pages 09 version 4.3 (not the iWork package, just Pages 09)
Operating system 10.8.3 with 4 Gb memory on an iMac from around 2009 (Intel core 2 duo)
I had been using Quark Xpress for a couple decades and wanted to save a book I did in Pages so I can sell it in the Apple bookstore.
So I saved a Quark document as a pdf.
Then I used an on-line service to convert the pdf to a word document.
Then I opened the word doc in Pages and saved it as a Pages file.
I am in the process of doing a lot of reformatting, but I'm not surprised all the formatting didn't carry over, considering all the flie formats I went through.
The document is about 40 pages and has perhaps 40 pictures, but I do resize them in Photoshop so the Pages document file is only 4.9 Mb.
Pages isn't all that different from Quark, it just seems to hide things in different places.
The problem is that every so often when I click in the document, I get the spinning ball and Pages hangs for 1 minute and 30 seconds (doesn't it seem odd that it is always for the same length of time?). Then it comes out of its coma and I carry on.
Using the Activity Monitor I see Pages using 99.8% or 100% or even 100.5% of CPU. And The Pages line is in red type that reads "Pages (Not Responding).
While I wait for Pages to come to its senses, I can surf the Web, or use other programs, which seems peculiar because if the CPU is 100% occupied, I would think it could.
When I go to the dock and click on the Pages icon, it doesn't come to the front. I have to move any other windows so I can see my Pages document and click on it to bring it to the front.
I went into FontBook and checked all my fonts and deleted a bunch. When I reopened the document, it said it was missing a font, so I selected a substitute, the document opened and I re-saved it with a new name.
Sometimes it hangs when I click in text, but just now it was hanging every time I tried to click on a line behind the main text box.
Just now it hung when I started to go to the Edit menu. I waited and now it's back, as if nothing happened.
Any ideas?After a very long night it seems my problems were solved by
1. making sure all the in-line pictures had the correct wrap around settings and
2. deleting some lines that had originally been underscores, but wound up being independent lines behind the main text box and
3. checking my fonts in FontBook and deleting the iffy ones (I dunno if this made any real difference, but I mention it anyway).
Every time I would select a line there would be a long pause. Initially 1 1/2 minutes, but shorter as I deleted the lines one by one.
There were also pauses when trying to select in-line pictures, and sometimes for no good reason that i could discern.
Anyway, now that the pictures' wrap around is re-set, and the lines are delected, there are bo more pauses!
Whew. I spent hours watching that ball spin. Still, it was better than re-creating the whole book. -
Close() over NFS hangs for 15 seconds on NAS 5320
Summary: We are experiencing long pauses waiting for files to close on NAS 5320.
Hardware:
NFS Server: 5320 NAS S/N ST5320200609190020 Version 4.20 M0 (Build 78)
NFS Clients: SunOS 5.10 Generic_118833-17 sun4u sparc SUNW,Sun-Fire-V240
SunOS mnemo 5.6 Generic_105181-20 sun4u sparc SUNW,Ultra-4
(Various other Solaris & Linux clients)
Symptom:
User copies a tiny file using "cp". The "cp" program hangs for 15 seconds before
normal exit and successful completion. Running "truss" on the "cp" command
reveals that the copy happens nearly instantaneously, and the program goes into
a sleep state waiting for the close() of the output file.
The problem is reproducible regardless of whether the filesystem is NFS hard
mounted or automounted. The problem seems to occur most often if the output
file being written previously existed under the same name, was recently deleted,
and is being recreated by the copy operation.
The problem is reproducible from every NFS client I've tried, both Solaris and Linux.
The problem is only exhibited for filesystems served by the NAS 5320.
Here's a typical truss output exhibiting the behavior. The 15-second hang occurs
after truss prints the line that says "close(4) (sleeping...)":
touch ../../xx ; rm ../../xx
truss cp -p trav_op.c ../../xxexecve("/bin/cp", 0xEFFFF738, 0xEFFFF74C) argc = 4
open("/dev/zero", O_RDONLY) = 3
mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0xEF7B0000
open("/usr/openwin/lib/libc.so.1", O_RDONLY) Err#2 ENOENT
open("/usr/lib/libc.so.1", O_RDONLY) = 4
fstat(4, 0xEFFFF2D4) = 0
mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF7A0000
mmap(0x00000000, 704512, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF680000
munmap(0xEF714000, 57344) = 0
mmap(0xEF722000, 28504, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 4, 598016) = 0xEF722000
mmap(0xEF72A000, 2664, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xEF72A000
close(4) = 0
open("/usr/openwin/lib/libdl.so.1", O_RDONLY) Err#2 ENOENT
open("/usr/lib/libdl.so.1", O_RDONLY) = 4
fstat(4, 0xEFFFF2D4) = 0
mmap(0xEF7A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 4, 0) = 0xEF7A0000
close(4) = 0
open("/usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1", O_RDONLY) = 4
fstat(4, 0xEFFFF0B4) = 0
mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF790000
mmap(0x00000000, 16384, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF780000
close(4) = 0
close(3) = 0
munmap(0xEF790000, 8192) = 0
stat64("trav_op.c", 0x00024200) = 0
acl("trav_op.c", GETACLCNT, 0, 0x00000000) = 4
stat64("../../xx", 0x00024168) Err#2 ENOENT
open64("trav_op.c", O_RDONLY) = 3
creat64("../../xx", 0644) = 4
stat64("../../xx", 0x00024168) = 0
chmod("../../xx", 0100644) = 0
mmap64(0x00000000, 38425, PROT_READ, MAP_SHARED, 3, 0) = 0xEF770000
memcntl(0xEF770000, 38425, MC_ADVISE, 0x0002, 0, 0) = 0
write(4, " / * - - - - - - - - - -".., 38425) = 38425
munmap(0xEF770000, 38425) = 0
close(3) = 0
close(4) (sleeping...) *** HANGS APPROX 15 SEC ***
close(4) = 0
chown("../../xx", 2048, 525) = 0
chmod("../../xx", 0100644) = 0
utime("../../xx", 0xEFFFEB08) = 0
llseek(0, 0, SEEK_CUR) = 23915
_exit(0)Hello,
are you aware that this isn't official Sun Support but a user-to-user forum ?
Michael
When will the deficencies/bugs in the Forums software be fixed ? -
Application hang for long time (unable to load)
hi and a very good day to all..
i am a new user of J2ME and i am currently using Sun Wireless Toolkit to run a sample program. But, there are some error occur when i open it from the Open Project in Sun Wireless Toolkit. Once i click the launch button on the emulator, it will show the graphic but with a statement 'Please Wait'. it seems like my application is going happen to hang for quite a long time (i even can't open it at all). it happen every time i open my project and i unable to load my program successfully. i want 2 ask, is it because of teh coding? or my pc? or the Sun Wireless Toolkit itself? i never change/edit the coding, since this the sample application of Mobile Compass i downloading from the internet.
there are bundle of code in my application (single application)..but the error 'Please Wait' basically come from 1 of the coding. i'll show it below:
**THE CODE**
package org.qcontinuum.compass;
import javax.microedition.lcdui.*;
import java.util.*;
abstract public class Progress extends Form implements CommandListener, Runnable {
private Displayable mParent;
private Command mCancelCommand;
private Thread mThread;
// private Timer mTimer;
public Progress(String title, Displayable parent) {
super(title);
mParent = parent;
append(new StringItem(null, "Please wait...\n"));
addCommand(mCancelCommand = new Command("Cancel", Command.CANCEL, 0));
setCommandListener(this);
mThread = new Thread(this);
public void start() {
mThread.start();
abstract public void run();
public void commandAction(Command c, Displayable d) {
if (c == mCancelCommand) {
Compass.display(mParent);
p/s: is it the above error related to java.lang.NullPointerException? this is because, with unexpected situation, suddenly the compass program able to download successfully (only sometime), but still it give some error like below, and i still can select the Time Zone for my destination chosen from the given map.
java.lang.NullPointerException
at java.io.DataInputStream.read(+4)
at java.io.DataInputStream.readUnsignedShort(+4)
at java.io.DataInputStream.readUTF(+6)
at java.io.DataInputStream.readUTF(+4)
at org.qcontinuum.compass.TimeZone.load(+6)
at org.qcontinuum.compass.TimeZone.<init>(+9)
at org.qcontinuum.compass.TimeZone.getZones(+36)
at org.qcontinuum.compass.LocationTimeZone.<init>(+89)
at org.qcontinuum.compass.LocationMap.locationSelected(+22)
at org.qcontinuum.compass.MapCanvas.moveImage(+282)
at org.qcontinuum.compass.MapCanvas.keyPressed(+22)
at javax.microedition.lcdui.Canvas.callKeyPressed(+19)
at javax.microedition.lcdui.Display$DisplayAccessor.keyEvent(+198)
at javax.microedition.lcdui.Display$DisplayManagerImpl.keyEvent(+11)
at com.sun.midp.lcdui.DefaultEventHandler.keyEvent(+127)
at com.sun.midp.lcdui.AutomatedEventHandler.keyEvent(+210)
at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.handleVmEvent(+114)
at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.run(+57)
can someone help me on this. i really need the answer for this solution. i am still new and in the process of leaning. Thanks a lot and hope all of u can help me. May God bless u. The reference for the above sample program is at http://http://qcontinuum.org/compass/index.htm
Regards,
Miss IeraHi,
Do you have variable replaced by another query? If that is case, you will get performance issue, when the prequery is runnig when call var screen.
Do you have variable replaced by authorization? If that is case, for the user will complicated authroization, it will take some time to fill it.
In general, when the variable screen is calling, have you check in sm66, what is the work process doing? In RSRT->run this query with statistics, which part takes most time? -
ODBC Data source administrator hanging for 20 seconds
After installing 32 bit ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio (11.2.0.3.20) our business is reporting slow Excel/VBA code using ODBC.
The business are querying using a ODBC System DSN. It works but hangs for 20 second when VBA releases the connection.
I can see that I get the same pause after testing the connection in the "ODBC Data Source administrator"
1. Open ODBC Data Source administrator
2. Edit the System DSN
3. Push "Test Conncetion". Says "Connection succesful". Push OK
4. Push "OK"
ODBC Data Source administrator now hangs for 20 seconds.
I did a clean installation on a Win7 x64 machine using 32 bit ODBC Data Source administrator
Nothing to find in the eventlog.
Does anyone know what could be wrong?Udpate: I tracked it down to Microsoft ISA Firewall Client installation. If I uninstall the ISA Firewall the problem disappears.
Only disabling the ISA Firewall doesn't help!
Other have reported the same behaviour https://groups.google.com/forum/#!topic/microsoft.public.isa.clients/F14GNANHppA
Any help will be appreciated!
Thanks -
CS4 randomly hangs for many minutes at a time
I've been doing a number of editing jobs on CS4 for a while now. Started out on a mac but happened to have a pretty decent Windows 7 system on hand so I decided to use that. Here are the specs:
Windows 7 (64-bit)
Intel quad-core i7
6 GB RAM
CS4 installed on 1TB C drive
Project files and scratch disk on striped volume consisting of 3 500GB SATA drives
This setup was performing spendidly on the first few projects I did, but seems to be bogging down as I work on more projects, even though the available disk space doesn't seemed to have changed much. It seems to bog down more on large projects.
What I'm noticing is that as I browse source files and try to set in/out points etc., CS4 will play for a little while and then hang for many minutes at a stretch. It will eventually come back and be usable for a short while but then hang again.
The strange thing is that when it is hung, the system resource monitor shows that the CS4 process is not responding, but it shows very low CPU usage on all cores and no surge in memory usage. Disk I/O also remains relatively low, leaving me at a loss to explain the hangs. I experienced something very similar on CS4 for mac when dealing with these same projects.
The projects have a lot of DV footage split into 2.6GB chunks that I am concatenating together. They also have some HD MJPEG AVIs that I captured using a Black Magic Intensity Pro card.
I should also add that when I finally do get the projects finished and start rendering them, the rendering is very fast overall, which confirms my theory that my machine's performance is more than adequate and these hangs are due to bugs and I/O bottlenecks in CS4 itself.
Needless to say, this is very frustrating. I have less of a problem if a program needs to do something and explains to me why I need to wait while it does it, but I don't like my programs to go away for hours without telling me where they're going.
Adobe people, if you're listening, please respond to this. I have seen a number of other complaints about similar issues. At least let us know if you're aware of these issues and what you are doing about it.
Thanks,
CarlWell, any progress is good, eh? For MJPEG's, most of us will recommend either the MainConcept, or the Morgan. I wonder how the BM MJPEG CODE's would work, without the card - just thinking there? BTW - more users like the MainConcept by a few.
As far as Adobe goes, if they are going to put up a forum, in my opinion, they should be actively monitoring it and responding to issues. Otherwise it becomes more of a liability than an asset and merely serves to call attention to their own obliviousness.
You make a good point, but I feel that Adobe sees these as an asset in that the best T/S work is done by other users. I always suggest that anyone having any issue with an Adobe product, stop by the fora first. Most never need to go any farther. For tons of free T/S, Adobe pays for the servers and the administration of the fora.
Still, and this is between just you and me, I'd love to hear that there are some "monitors," who do read. As I mentioned, this forum is blessed to have the few Adobe employees, that we do. Photoshop has Chris Cox, one of the developers of PS. Even in his role, however, I believe that he only offers solutions and explanations, and does not "take notes." One exception was when he was compiling a list of "problem fonts" for PS, and asked for contributions with full details on what problems they caused.
When a new upgrade, or an update is issued, we do see more Adobe representation here. It usually starts with a post that something is coming out, and as many details, as are possible to divulge, are given. As we draw closer to the release date, more details are often forthcoming. This presence usually stays until after the release, and we get to comment from the trenches, how the update/upgrade works. Then, I know that notes are being taken. After a bit, that presence fades (as far as we can tell, but who knows?). Sometimes I wonder about those shadows on the wall in the Video Lounge... oh wait, those are just grease stains from the yoodles.
Good luck on your Project, and please keep us updated. My brain just keeps coming back to the MJPEG's, but they probably are not part of the issue.
Hunt -
Firefox hangs for a few seconds when trying to pause videos or skip ads on Youtube.
Hello all!
My problem is that YouTube sort of hangs for a few seconds when I try to pause a video or skip ahead or skip ads. The video freezes while the audio keeps playing until, after say 5 seconds, youtube finally does what I tell it to do.
This doesn't happen if the video is embedded on a different website, nor does it happen on Vimeo, Dailymotion etc. I can play YouTube videos perfectly while using Chrome, IE and a Windows 8 Youtube app I have.
After the initial freeze all commands start working very well, at least until I open a new video.
I noticed that a lot of people are having trouble with youtube while using firefox and I've tried a few things:
- uninstalling and reinstalling flash and java
- starting Firefox in safe mode
- using different antivirus software
- reinstalling Firefox
I read that this might be a problem caused by the whole Google being all buddy-buddy with Adobe thing, but I'm skeptical.
So, is there any way to get YouTube to work properly?
Thanks!Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
yes so this hanging issue is not all the time. it happens like almost half the times i unlock.
i tried restoring. initially it was ok. then i downloadded an app from the appstore. after downloading i unlocked my ipod and it hangs.
for sure it will hang at this time.
then it continues to hang
it is not jailbroken
and its not only the homescreen. its just the whole device. during this hanging time no button will work. the touch interface does not work. nothing. after 5 seconds....everything is back to normal ... it is very very annoying
plsss help!!!
i tried
1) reset (with all apps closed and wifi off)
2)reboot
3)restore (also dfu restore)
im currently on ios 5.1.1.
what should i doo???????
pleeeeeaasssseeee help!Have you tried the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
Im using firefox 3.6.18 and when i open website it hangs for a few seconds...
im surfing at myanimelist.net and when i loads the pages, it hangs for a few seconds and stop... then hangs again (not responding).. i disable all the plugins but it still the same.. and ive deleted .dat files of plugins suggested by troubleshoot but the same problem still persist... please fix this bug thanks..
OS: windows 7 ultimate 32 bit
processor: amd turion x2 64bit
model:compaq cq40-319ax
graphics: ati mobility radeon 3450The speed of image searching isn't a problem for me. The trouble is, the automatic zoom function is lightning fast and I find it disturbing to the point that it makes me feel very ill.
I very much want a way of suppressing it. -
When we run $CRS_HOME/root.sh scripts-This hangs for a very long time
Hi,
At the time of oracle cluster ware installation, when we run $CRS_HOME/root.sh scripts…
bash-3.00# /export/home/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d1s1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
This hangs for a very long time; I controlled out of it and re-run it. The same result, it stops at the last line for hours now. Any idea?
Thanks
ANup
Edited by: user485641 on २५ अप्रैल, २००९ ७:०५ अपराह्नwhat os ? what Oracle version?
What you find on cluster log.... ? -
Thin driver / 8i / Solaris hangs for 60 seconds
I am having the same problem that I have also seen in these two messages:
http://technet.oracle.com:89/ubb/Forum8/HTML/002149.html http://technet.oracle.com:89/ubb/Forum8/HTML/001335.html
Using the thin driver to connect to Oracle 8.1.6 on Solaris 7, every several hundred operations or so will hang for 60 seconds. A stack trace will reveal it is hung on "socket.read()", most frequently when it is trying to close a Statement but not exclusively. After 60 seconds, or if another database operation on a different connection proceeds, it will wake up and continue until the next freeze. This problem occurs with jdk1.2.2 and jdk1.3 (Sun VMs), several different versions of the thin driver (tried classes111.zip, classes12.zip, classes102.zip, downloaded the most recent the other day), and will happen from a remote server or on localhost. A patch upgrade the other day to 8.1.6 seemed to make the problem less frequent but it persists.I am having the same problem that I have also seen in these two messages:
http://technet.oracle.com:89/ubb/Forum8/HTML/002149.html http://technet.oracle.com:89/ubb/Forum8/HTML/001335.html
Using the thin driver to connect to Oracle 8.1.6 on Solaris 7, every several hundred operations or so will hang for 60 seconds. A stack trace will reveal it is hung on "socket.read()", most frequently when it is trying to close a Statement but not exclusively. After 60 seconds, or if another database operation on a different connection proceeds, it will wake up and continue until the next freeze. This problem occurs with jdk1.2.2 and jdk1.3 (Sun VMs), several different versions of the thin driver (tried classes111.zip, classes12.zip, classes102.zip, downloaded the most recent the other day), and will happen from a remote server or on localhost. A patch upgrade the other day to 8.1.6 seemed to make the problem less frequent but it persists. -
Acpi_pci_root_init hangs for seven seconds at boot: why?
EDIT:
I just find out where's the problem, but I don't know why it shows up and I don't know what it means.
Basically my system hangs up here for seven seconds (or so) and I wish to understand the reason(s).
[ 1.090519] calling acpi_pci_root_init+0x0/0x2d @ 1
[ 8.373387] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 7112169 usecs
Original Message:
So, everything started when I tried systemd-analyze to reduce my boot time.
Long story short, after various try I used bootchart to have this:
http://s1.postimage.org/5ousetq25/bootchart.png
The process named acpi_pci_root_init (sadly I have almost no experience with this side of my PC) seems to hang for seven seconds.
I already tried to see if something's wrong with dmesg, but as I stated I've got almost no experience with this.
May someone help me to find an answer?
dmesg | grep acpi
$ dmesg | grep acpi
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.142733] calling acpi_pci_init+0x0/0x5c @ 1
[ 0.142742] initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs
[ 0.144312] calling acpi_init+0x0/0x29b @ 1
[ 1.090230] initcall acpi_init+0x0/0x29b returned 0 after 927674 usecs
[ 1.090519] calling acpi_pci_root_init+0x0/0x2d @ 1
[ 8.373387] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 7112169 usecs
[ 8.373393] calling acpi_pci_link_init+0x0/0x3e @ 1
[ 8.374178] initcall acpi_pci_link_init+0x0/0x3e returned 0 after 0 usecs
[ 8.415939] calling acpi_event_init+0x0/0x55 @ 1
[ 8.415967] initcall acpi_event_init+0x0/0x55 returned 0 after 21 usecs
[ 8.416013] calling pnpacpi_init+0x0/0x8c @ 1
[ 8.816967] initcall pnpacpi_init+0x0/0x8c returned 0 after 391548 usecs
[ 8.821916] calling init_acpi_pm_clocksource+0x0/0xdf @ 1
[ 8.826454] initcall init_acpi_pm_clocksource+0x0/0xdf returned 0 after 4426 usecs
[ 9.015610] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 9.015622] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 5 usecs
[ 9.015638] calling acpi_hed_init+0x0/0x30 @ 1
[ 9.015702] initcall acpi_hed_init+0x0/0x30 returned 0 after 56 usecs
[ 15.882904] calling acpi_ac_init+0x0/0x30 [ac] @ 178
[ 15.888039] initcall acpi_ac_init+0x0/0x30 [ac] returned 0 after 5001 usecs
[ 16.130144] calling acpi_button_init+0x0/0x12 [button] @ 171
[ 16.131400] initcall acpi_button_init+0x0/0x12 [button] returned 0 after 1214 usecs
[ 16.136418] calling acpi_battery_init+0x0/0x16 [battery] @ 180
[ 16.136435] initcall acpi_battery_init+0x0/0x16 [battery] returned 0 after 6 usecs
[ 16.141024] calling acpi_thermal_init+0x0/0x42 [thermal] @ 160
[ 16.141654] calling acpi_video_init+0x0/0x91 [video] @ 176
[ 16.157794] calling acpi_wmi_init+0x0/0x71 [wmi] @ 188
[ 16.160033] initcall acpi_wmi_init+0x0/0x71 [wmi] returned 0 after 2174 usecs
[ 16.257354] acpi device:03: registered as cooling_device0
[ 16.258779] initcall acpi_video_init+0x0/0x91 [video] returned 0 after 114366 usecs
[ 16.263618] calling acpi_processor_init+0x0/0x7e [processor] @ 147
[ 16.263747] ACPI: Requesting acpi_cpufreq
[ 16.288111] initcall acpi_thermal_init+0x0/0x42 [thermal] returned 0 after 143623 usecs
[ 16.783761] ACPI: acpi_idle registered with cpuidle
[ 16.852081] acer_wmi: Brightness must be controlled by acpi video driver
[ 17.187796] initcall acpi_processor_init+0x0/0x7e [processor] returned 0 after 902497 usecs
[ 17.273911] calling acpi_cpufreq_init+0x0/0xb1 [acpi_cpufreq] @ 214
[ 17.274830] initcall acpi_cpufreq_init+0x0/0xb1 [acpi_cpufreq] returned 0 after 883 usecs
dmesg
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.11-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14ba80b0-8331-4d2c-8194-c1741b611124 ro quiet ro libahci.ignore_sss=1 initcall_debug init=/usr/bin/bootchartd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9b8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9b9000-0x00000000bfa0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd19000-0x00000000bfd1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd5efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd5f000-0x00000000bfd9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfde1000-0x00000000bfdfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Acer Aspire 7738 /JM70 , BIOS V1.07 06/22/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6d90-0x000f6d9f] mapped at [ffff8800000f6d90]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfdfffff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbfdfffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbfddf000-0xbfde0fff]
[ 0.000000] RAMDISK: [mem 0x37a60000-0x37d27fff]
[ 0.000000] ACPI: RSDP 00000000000f6bf0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bfdf3a01 0005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 00000000bfde3000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfde4000 0B189 (v02 Intel CANTIGA 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfd9dfc0 00040
[ 0.000000] ACPI: HPET 00000000bfdfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfdfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC 00000000bfdfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 00000000bfdfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfdfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfde2000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffc000-0x13fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] node 0: [mem 0xbf8a7000-0xbf9b8fff]
[ 0.000000] node 0: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] node 0: [mem 0xbfd0f000-0xbfd18fff]
[ 0.000000] node 0: [mem 0xbfd1f000-0xbfd5efff]
[ 0.000000] node 0: [mem 0xbfd9f000-0xbfde0fff]
[ 0.000000] node 0: [mem 0xbfdff000-0xbfdfffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1047240
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 764793 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
[ 0.000000] PM: Registered nosave memory: 00000000bf9b9000 - 00000000bfa0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd19000 - 00000000bfd1f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd5f000 - 00000000bfd9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfde1000 - 00000000bfdff000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfe00000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026754
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14ba80b0-8331-4d2c-8194-c1741b611124 ro quiet ro libahci.ignore_sss=1 initcall_debug init=/usr/bin/bootchartd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4043048k/5242880k available (4728k kernel code, 1053920k absent, 145912k reserved, 4142k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1994.996 MHz processor
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.24 BogoMIPS (lpj=6649986)
[ 0.006673] pid_max: default: 32768 minimum: 301
[ 0.006747] Security Framework initialized
[ 0.006757] AppArmor: AppArmor disabled by boot time parameter
[ 0.007514] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011095] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012732] Mount-cache hash table entries: 256
[ 0.013244] Initializing cgroup subsys cpuacct
[ 0.013251] Initializing cgroup subsys memory
[ 0.013271] Initializing cgroup subsys devices
[ 0.013274] Initializing cgroup subsys freezer
[ 0.013277] Initializing cgroup subsys net_cls
[ 0.013280] Initializing cgroup subsys blkio
[ 0.013381] CPU: Physical Processor ID: 0
[ 0.013384] CPU: Processor Core ID: 0
[ 0.013389] mce: CPU supports 6 MCE banks
[ 0.013405] CPU0: Thermal monitoring enabled (TM1)
[ 0.013412] process: using mwait in idle threads
[ 0.013423] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.016505] ACPI: Core revision 20120711
[ 0.026709] ftrace: allocating 18351 entries in 72 pages
[ 0.040530] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075020] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 0.076662] calling trace_init_flags_sys_exit+0x0/0x12 @ 1
[ 0.076662] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs
[ 0.076662] calling trace_init_flags_sys_enter+0x0/0x12 @ 1
[ 0.076662] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs
[ 0.076662] calling init_hw_perf_events+0x0/0x3a9 @ 1
[ 0.076662] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076662] ... version: 2
[ 0.076662] ... bit width: 40
[ 0.076662] ... generic registers: 2
[ 0.076662] ... value mask: 000000ffffffffff
[ 0.076662] ... max period: 000000007fffffff
[ 0.076662] ... fixed-purpose events: 3
[ 0.076662] ... event mask: 0000000700000003
[ 0.076662] initcall init_hw_perf_events+0x0/0x3a9 returned 0 after 0 usecs
[ 0.076662] calling register_trigger_all_cpu_backtrace+0x0/0x16 @ 1
[ 0.076662] initcall register_trigger_all_cpu_backtrace+0x0/0x16 returned 0 after 0 usecs
[ 0.076662] calling spawn_ksoftirqd+0x0/0x51 @ 1
[ 0.080008] initcall spawn_ksoftirqd+0x0/0x51 returned 0 after 6509 usecs
[ 0.080013] calling init_workqueues+0x0/0x3cc @ 1
[ 0.093431] initcall init_workqueues+0x0/0x3cc returned 0 after 13019 usecs
[ 0.093436] calling migration_init+0x0/0x6c @ 1
[ 0.093444] initcall migration_init+0x0/0x6c returned 0 after 0 usecs
[ 0.093449] calling cpu_stop_init+0x0/0xad @ 1
[ 0.100009] initcall cpu_stop_init+0x0/0xad returned 0 after 6509 usecs
[ 0.100015] calling rcu_scheduler_really_started+0x0/0x12 @ 1
[ 0.100021] initcall rcu_scheduler_really_started+0x0/0x12 returned 0 after 0 usecs
[ 0.100026] calling relay_init+0x0/0x14 @ 1
[ 0.100032] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[ 0.100037] calling tracer_alloc_buffers+0x0/0x1fe @ 1
[ 0.100114] initcall tracer_alloc_buffers+0x0/0x1fe returned 0 after 0 usecs
[ 0.100119] calling init_events+0x0/0x60 @ 1
[ 0.100127] initcall init_events+0x0/0x60 returned 0 after 0 usecs
[ 0.100132] calling init_trace_printk+0x0/0x12 @ 1
[ 0.100138] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
[ 0.100144] calling jump_label_init_module+0x0/0x12 @ 1
[ 0.100150] initcall jump_label_init_module+0x0/0x12 returned 0 after 0 usecs
[ 0.100239] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.113345] smpboot: Booting Node 0, Processors #1 OK
[ 0.126520] Brought up 2 CPUs
[ 0.126520] smpboot: Total of 2 processors activated (7983.48 BogoMIPS)
[ 0.130144] devtmpfs: initialized
[ 0.139149] calling ipc_ns_init+0x0/0x14 @ 1
[ 0.139157] initcall ipc_ns_init+0x0/0x14 returned 0 after 0 usecs
[ 0.139163] calling init_mmap_min_addr+0x0/0x16 @ 1
[ 0.139169] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
[ 0.139175] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 0.139187] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[ 0.139192] calling net_ns_init+0x0/0xea @ 1
[ 0.139221] initcall net_ns_init+0x0/0xea returned 0 after 0 usecs
[ 0.139221] calling e820_mark_nvs_memory+0x0/0x3d @ 1
[ 0.139221] PM: Registering ACPI NVS region [mem 0xbfd5f000-0xbfd9efff] (262144 bytes)
[ 0.139221] initcall e820_mark_nvs_memory+0x0/0x3d returned 0 after 0 usecs
[ 0.139221] calling cpufreq_tsc+0x0/0x33 @ 1
[ 0.139221] initcall cpufreq_tsc+0x0/0x33 returned 0 after 0 usecs
[ 0.139221] calling reboot_init+0x0/0x20 @ 1
[ 0.139221] initcall reboot_init+0x0/0x20 returned 0 after 0 usecs
[ 0.139221] calling init_lapic_sysfs+0x0/0x23 @ 1
[ 0.139221] initcall init_lapic_sysfs+0x0/0x23 returned 0 after 0 usecs
[ 0.139221] calling cpu_hotplug_pm_sync_init+0x0/0x14 @ 1
[ 0.139221] initcall cpu_hotplug_pm_sync_init+0x0/0x14 returned 0 after 0 usecs
[ 0.139221] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.139221] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.139221] calling ksysfs_init+0x0/0x97 @ 1
[ 0.139221] initcall ksysfs_init+0x0/0x97 returned 0 after 0 usecs
[ 0.139221] calling pm_init+0x0/0x7f @ 1
[ 0.139221] initcall pm_init+0x0/0x7f returned 0 after 0 usecs
[ 0.139221] calling pm_disk_init+0x0/0x19 @ 1
[ 0.139221] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[ 0.139221] calling swsusp_header_init+0x0/0x40 @ 1
[ 0.139221] initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs
[ 0.139221] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 0.139221] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[ 0.139221] calling init_ftrace_syscalls+0x0/0x70 @ 1
[ 0.141872] initcall init_ftrace_syscalls+0x0/0x70 returned 0 after 3254 usecs
[ 0.141878] calling init_zero_pfn+0x0/0x1f @ 1
[ 0.141883] initcall init_zero_pfn+0x0/0x1f returned 0 after 0 usecs
[ 0.141888] calling memory_failure_init+0x0/0xa0 @ 1
[ 0.141893] initcall memory_failure_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.141898] calling fsnotify_init+0x0/0x26 @ 1
[ 0.141907] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs
[ 0.141912] calling filelock_init+0x0/0x2a @ 1
[ 0.141920] initcall filelock_init+0x0/0x2a returned 0 after 0 usecs
[ 0.141925] calling init_misc_binfmt+0x0/0x31 @ 1
[ 0.141932] initcall init_misc_binfmt+0x0/0x31 returned 0 after 0 usecs
[ 0.141936] calling init_script_binfmt+0x0/0x16 @ 1
[ 0.141941] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.141946] calling init_elf_binfmt+0x0/0x16 @ 1
[ 0.141951] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.141955] calling init_compat_elf_binfmt+0x0/0x16 @ 1
[ 0.141960] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.141965] calling debugfs_init+0x0/0x5b @ 1
[ 0.141975] initcall debugfs_init+0x0/0x5b returned 0 after 0 usecs
[ 0.141980] calling securityfs_init+0x0/0x52 @ 1
[ 0.141989] initcall securityfs_init+0x0/0x52 returned 0 after 0 usecs
[ 0.141994] calling random32_init+0x0/0xd2 @ 1
[ 0.142000] initcall random32_init+0x0/0xd2 returned 0 after 0 usecs
[ 0.142005] calling sfi_sysfs_init+0x0/0xd9 @ 1
[ 0.142010] initcall sfi_sysfs_init+0x0/0xd9 returned 0 after 0 usecs
[ 0.142016] calling __gnttab_init+0x0/0x24 @ 1
[ 0.142022] initcall __gnttab_init+0x0/0x24 returned -19 after 0 usecs
[ 0.142027] calling cpufreq_core_init+0x0/0xc1 @ 1
[ 0.142036] initcall cpufreq_core_init+0x0/0xc1 returned 0 after 0 usecs
[ 0.142041] calling cpuidle_init+0x0/0x41 @ 1
[ 0.142052] initcall cpuidle_init+0x0/0x41 returned 0 after 0 usecs
[ 0.142056] calling sock_init+0x0/0x92 @ 1
[ 0.142137] initcall sock_init+0x0/0x92 returned 0 after 0 usecs
[ 0.142143] calling net_inuse_init+0x0/0x26 @ 1
[ 0.142151] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
[ 0.142156] calling netpoll_init+0x0/0x30 @ 1
[ 0.142161] initcall netpoll_init+0x0/0x30 returned 0 after 0 usecs
[ 0.142166] calling netlink_proto_init+0x0/0x1dd @ 1
[ 0.142176] NET: Registered protocol family 16
[ 0.142195] initcall netlink_proto_init+0x0/0x1dd returned 0 after 0 usecs
[ 0.142229] calling bdi_class_init+0x0/0x49 @ 1
[ 0.142277] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
[ 0.142283] calling kobject_uevent_init+0x0/0x21 @ 1
[ 0.142293] initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs
[ 0.142299] calling gpiolib_sysfs_init+0x0/0x93 @ 1
[ 0.142318] initcall gpiolib_sysfs_init+0x0/0x93 returned 0 after 0 usecs
[ 0.142323] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.142335] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.142341] calling pci_driver_init+0x0/0x19 @ 1
[ 0.142363] initcall pci_driver_init+0x0/0x19 returned 0 after 0 usecs
[ 0.142368] calling rio_bus_init+0x0/0x37 @ 1
[ 0.142417] initcall rio_bus_init+0x0/0x37 returned 0 after 0 usecs
[ 0.142422] calling backlight_class_init+0x0/0x5d @ 1
[ 0.142436] initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
[ 0.142440] calling xenbus_init+0x0/0x2b2 @ 1
[ 0.142446] initcall xenbus_init+0x0/0x2b2 returned -19 after 0 usecs
[ 0.142450] calling tty_class_init+0x0/0x34 @ 1
[ 0.142462] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
[ 0.142466] calling vtconsole_class_init+0x0/0xe9 @ 1
[ 0.142513] initcall vtconsole_class_init+0x0/0xe9 returned 0 after 0 usecs
[ 0.142519] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1
[ 0.142529] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs
[ 0.142534] calling register_node_type+0x0/0x31 @ 1
[ 0.142586] initcall register_node_type+0x0/0x31 returned 0 after 0 usecs
[ 0.142592] calling regmap_initcall+0x0/0xd @ 1
[ 0.142602] initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
[ 0.142606] calling amd_postcore_init+0x0/0x148 @ 1
[ 0.142611] initcall amd_postcore_init+0x0/0x148 returned 0 after 0 usecs
[ 0.142643] calling set_real_mode_permissions+0x0/0x9d @ 1
[ 0.142674] initcall set_real_mode_permissions+0x0/0x9d returned 0 after 0 usecs
[ 0.142679] calling arch_kdebugfs_init+0x0/0x24 @ 1
[ 0.142689] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.142695] calling mtrr_if_init+0x0/0x65 @ 1
[ 0.142703] initcall mtrr_if_init+0x0/0x65 returned 0 after 0 usecs
[ 0.142708] calling ffh_cstate_init+0x0/0x2d @ 1
[ 0.142716] initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
[ 0.142722] calling activate_jump_labels+0x0/0x35 @ 1
[ 0.142727] initcall activate_jump_labels+0x0/0x35 returned 0 after 0 usecs
[ 0.142733] calling acpi_pci_init+0x0/0x5c @ 1
[ 0.142737] ACPI: bus type pci registered
[ 0.142742] initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs
[ 0.142747] calling dma_bus_init+0x0/0x19 @ 1
[ 0.142760] initcall dma_bus_init+0x0/0x19 returned 0 after 0 usecs
[ 0.142764] calling dma_channel_table_init+0x0/0x115 @ 1
[ 0.142807] initcall dma_channel_table_init+0x0/0x115 returned 0 after 0 usecs
[ 0.142812] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
[ 0.142817] initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs
[ 0.142822] calling xen_pcpu_init+0x0/0xc3 @ 1
[ 0.142827] initcall xen_pcpu_init+0x0/0xc3 returned -19 after 0 usecs
[ 0.142832] calling register_xen_pci_notifier+0x0/0x31 @ 1
[ 0.142837] initcall register_xen_pci_notifier+0x0/0x31 returned 0 after 0 usecs
[ 0.142842] calling dmi_id_init+0x0/0x31f @ 1
[ 0.142920] initcall dmi_id_init+0x0/0x31f returned 0 after 0 usecs
[ 0.142926] calling pci_arch_init+0x0/0x6a @ 1
[ 0.142981] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.142987] PCI: not using MMCONFIG
[ 0.142990] PCI: Using configuration type 1 for base access
[ 0.143001] initcall pci_arch_init+0x0/0x6a returned 0 after 0 usecs
[ 0.143034] calling topology_init+0x0/0x8e @ 1
[ 0.143315] initcall topology_init+0x0/0x8e returned 0 after 0 usecs
[ 0.143321] calling mtrr_init_finialize+0x0/0x36 @ 1
[ 0.143333] initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs
[ 0.143339] calling init_vdso+0x0/0x24e @ 1
[ 0.143349] initcall init_vdso+0x0/0x24e returned 0 after 0 usecs
[ 0.143355] calling sysenter_setup+0x0/0x2d2 @ 1
[ 0.143367] initcall sysenter_setup+0x0/0x2d2 returned 0 after 0 usecs
[ 0.143372] calling param_sysfs_init+0x0/0x1ae @ 1
[ 0.144232] initcall param_sysfs_init+0x0/0x1ae returned 0 after 0 usecs
[ 0.144238] calling pm_sysrq_init+0x0/0x20 @ 1
[ 0.144245] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[ 0.144250] calling default_bdi_init+0x0/0x37 @ 1
[ 0.144312] initcall default_bdi_init+0x0/0x37 returned 0 after 0 usecs
[ 0.144312] calling init_bio+0x0/0xeb @ 1
[ 0.144312] bio: create slab <bio-0> at 0
[ 0.144312] initcall init_bio+0x0/0xeb returned 0 after 0 usecs
[ 0.144312] calling fsnotify_notification_init+0x0/0x8b @ 1
[ 0.144312] initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs
[ 0.144312] calling cryptomgr_init+0x0/0x12 @ 1
[ 0.144312] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[ 0.144312] calling blk_settings_init+0x0/0x2a @ 1
[ 0.144312] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.144312] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.144312] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.144312] calling blk_softirq_init+0x0/0x6d @ 1
[ 0.144312] initcall blk_softirq_init+0x0/0x6d returned 0 after 0 usecs
[ 0.144312] calling blk_iopoll_setup+0x0/0x6d @ 1
[ 0.144312] initcall blk_iopoll_setup+0x0/0x6d returned 0 after 0 usecs
[ 0.144312] calling genhd_device_init+0x0/0x78 @ 1
[ 0.144312] initcall genhd_device_init+0x0/0x78 returned 0 after 0 usecs
[ 0.144312] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.144312] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.144312] calling pci_slot_init+0x0/0x50 @ 1
[ 0.144312] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 0.144312] calling fbmem_init+0x0/0x98 @ 1
[ 0.144312] initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
[ 0.144312] calling acpi_init+0x0/0x29b @ 1
[ 0.144312] ACPI: Added _OSI(Module Device)
[ 0.144312] ACPI: Added _OSI(Processor Device)
[ 0.144312] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144312] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147802] ACPI: EC: Look up EC in DSDT
[ 0.154692] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.156033] ACPI: SSDT 00000000bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.156805] ACPI: Dynamic OEM Table Load:
[ 0.156812] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.157088] ACPI: SSDT 00000000bfd19620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.157818] ACPI: Dynamic OEM Table Load:
[ 0.157824] ACPI: SSDT (null) 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.157855] ACPI: SSDT 00000000bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.157962] ACPI: Dynamic OEM Table Load:
[ 0.157968] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.157990] ACPI: SSDT 00000000bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.157990] ACPI: Dynamic OEM Table Load:
[ 0.157990] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.176809] ACPI: Interpreter enabled
[ 0.176818] ACPI: (supports S0 S3 S4 S5)
[ 0.176859] ACPI: Using IOAPIC for interrupt routing
[ 0.176902] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.178494] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.090171] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.090230] initcall acpi_init+0x0/0x29b returned 0 after 927674 usecs
[ 1.090238] calling dock_init+0x0/0xa8 @ 1
[ 1.090507] ACPI: No dock devices found.
[ 1.090514] initcall dock_init+0x0/0xa8 returned 0 after 0 usecs
[ 1.090519] calling acpi_pci_root_init+0x0/0x2d @ 1
[ 1.090527] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.091164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.092404] PCI host bridge to bus 0000:00
[ 1.092414] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 1.092419] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.092425] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.092430] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.092435] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.092440] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.092445] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.092451] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.092456] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 1.092461] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 1.092482] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 1.092526] DMAR: Forcing write-buffer flush capability
[ 1.092529] DMAR: Disabling IOMMU for graphics on this chipset
[ 1.092584] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 1.092673] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.092752] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 1.092839] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 1.092941] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 1.093013] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 1.093118] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 1.093154] pci 0000:00:1a.7: reg 10: [mem 0xf3404800-0xf3404bff]
[ 1.093306] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.093353] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 1.093380] pci 0000:00:1b.0: reg 10: [mem 0xf3400000-0xf3403fff 64bit]
[ 1.093497] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.093541] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 1.093664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.093707] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 1.093828] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.093875] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 1.093996] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.094043] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 1.094115] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 1.094207] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 1.094289] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 1.094387] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 1.094462] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 1.094565] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 1.094637] pci 0000:00:1d.3: reg 20: [io 0x18a0-0x18bf]
[ 1.094739] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 1.094775] pci 0000:00:1d.7: reg 10: [mem 0xf3404c00-0xf3404fff]
[ 1.094920] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.094962] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.095073] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 1.095257] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 1.095291] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
[ 1.095307] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
[ 1.095323] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
[ 1.095339] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
[ 1.095354] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
[ 1.095370] pci 0000:00:1f.2: reg 24: [mem 0xf3404000-0xf34047ff]
[ 1.095452] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.095487] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 1.095515] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 1.095552] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 1.095655] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 1.095762] pci 0000:01:00.0: [10de:0652] type 00 class 0x030000
[ 1.095849] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[ 1.095943] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.096038] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit]
[ 1.096099] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 1.096161] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 1.103311] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.103320] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.103327] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 1.103337] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.103406] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 1.103601] pci 0000:02:00.0: [14e4:1698] type 00 class 0x020000
[ 1.103637] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit]
[ 1.103831] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 1.113439] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.113452] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 1.113526] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 1.113604] pci 0000:03:00.0: [8086:4232] type 00 class 0x028000
[ 1.113700] pci 0000:03:00.0: reg 10: [mem 0xf3100000-0xf3101fff 64bit]
[ 1.113975] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.114152] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.114163] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.114237] pci_bus 0000:04: busn_res: [bus 04-06] is inserted under [bus 00-ff]
[ 1.114245] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[ 1.114253] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 1.114261] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 1.114273] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 1.114311] pci_bus 0000:0d: busn_res: [bus 0d] is inserted under [bus 00-ff]
[ 1.114379] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 1.114397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.114402] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.114408] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.114413] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.114419] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.114424] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.114429] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.114435] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 1.114474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.114656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.114759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.114890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.114961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.115039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.115127] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.115132] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 8.373387] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 7112169 usecs
[ 8.373393] calling acpi_pci_link_init+0x0/0x3e @ 1
[ 8.373495] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 8.373592] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 8.373684] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 8.373774] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 8.373863] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 8.373953] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 8.374042] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 8.374133] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[ 8.374178] initcall acpi_pci_link_init+0x0/0x3e returned 0 after 0 usecs
[ 8.374184] calling pnp_init+0x0/0x19 @ 1
[ 8.374211] initcall pnp_init+0x0/0x19 returned 0 after 0 usecs
[ 8.374219] calling xen_setup_shutdown_event+0x0/0x30 @ 1
[ 8.374226] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs
[ 8.374231] calling balloon_init+0x0/0x197 @ 1
[ 8.374236] initcall balloon_init+0x0/0x197 returned -19 after 0 usecs
[ 8.374240] calling xenbus_probe_backend_init+0x0/0x31 @ 1
[ 8.374262] initcall xenbus_probe_backend_init+0x0/0x31 returned 0 after 0 usecs
[ 8.374267] calling xenbus_probe_frontend_init+0x0/0x31 @ 1
[ 8.374287] initcall xenbus_probe_frontend_init+0x0/0x31 returned 0 after 0 usecs
[ 8.374291] calling balloon_init+0x0/0xf2 @ 1
[ 8.374296] initcall balloon_init+0x0/0xf2 returned -19 after 0 usecs
[ 8.374301] calling misc_init+0x0/0xb6 @ 1
[ 8.374321] initcall misc_init+0x0/0xb6 returned 0 after 0 usecs
[ 8.374326] calling vga_arb_device_init+0x0/0xef @ 1
[ 8.376186] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 8.376193] vgaarb: loaded
[ 8.376195] vgaarb: bridge control possible 0000:01:00.0
[ 8.376202] initcall vga_arb_device_init+0x0/0xef returned 0 after 0 usecs
[ 8.376208] calling cn_init+0x0/0xac @ 1
[ 8.376236] initcall cn_init+0x0/0xac returned 0 after 0 usecs
[ 8.376241] calling serio_init+0x0/0x35 @ 1
[ 8.376269] initcall serio_init+0x0/0x35 returned 0 after 0 usecs
[ 8.376274] calling input_init+0x0/0x113 @ 1
[ 8.376295] initcall input_init+0x0/0x113 returned 0 after 0 usecs
[ 8.376300] calling rtc_init+0x0/0x6a @ 1
[ 8.376314] initcall rtc_init+0x0/0x6a returned 0 after 0 usecs
[ 8.376319] calling power_supply_class_init+0x0/0x40 @ 1
[ 8.376338] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 8.376343] calling hwmon_init+0x0/0xee @ 1
[ 8.376361] initcall hwmon_init+0x0/0xee returned 0 after 0 usecs
[ 8.376366] calling watchdog_init+0x0/0x63 @ 1
[ 8.376379] initcall watchdog_init+0x0/0x63 returned 0 after 0 usecs
[ 8.376384] calling leds_init+0x0/0x44 @ 1
[ 8.376395] initcall leds_init+0x0/0x44 returned 0 after 0 usecs
[ 8.376401] calling iommu_init+0x0/0x56 @ 1
[ 8.376410] initcall iommu_init+0x0/0x56 returned 0 after 0 usecs
[ 8.376415] calling pci_subsys_init+0x0/0x4a @ 1
[ 8.376418] PCI: Using ACPI for IRQ routing
[ 8.384979] PCI: pci_cache_line_size set to 64 bytes
[ 8.385328] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 8.385332] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 8.385339] e820: reserve RAM buffer [mem 0xbf9b9000-0xbfffffff]
[ 8.385351] e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
[ 8.385357] e820: reserve RAM buffer [mem 0xbfd19000-0xbfffffff]
[ 8.385362] e820: reserve RAM buffer [mem 0xbfd5f000-0xbfffffff]
[ 8.385367] e820: reserve RAM buffer [mem 0xbfde1000-0xbfffffff]
[ 8.385371] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[ 8.385378] initcall pci_subsys_init+0x0/0x4a returned 0 after 9764 usecs
[ 8.385383] calling proto_init+0x0/0x12 @ 1
[ 8.385392] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[ 8.385397] calling net_dev_init+0x0/0x22c @ 1
[ 8.385594] initcall net_dev_init+0x0/0x22c returned 0 after 0 usecs
[ 8.385599] calling neigh_init+0x0/0x80 @ 1
[ 8.385604] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
[ 8.385609] calling fib_rules_init+0x0/0xac @ 1
[ 8.385615] initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
[ 8.385620] calling pktsched_init+0x0/0xfb @ 1
[ 8.385629] initcall pktsched_init+0x0/0xfb returned 0 after 0 usecs
[ 8.385634] calling tc_filter_init+0x0/0x55 @ 1
[ 8.385639] initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
[ 8.385643] calling tc_action_init+0x0/0x55 @ 1
[ 8.385648] initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs
[ 8.385653] calling genl_init+0x0/0x8f @ 1
[ 8.385671] initcall genl_init+0x0/0x8f returned 0 after 0 usecs
[ 8.385677] calling cipso_v4_init+0x0/0x64 @ 1
[ 8.385683] initcall cipso_v4_init+0x0/0x64 returned 0 after 0 usecs
[ 8.385688] calling wireless_nlevent_init+0x0/0x12 @ 1
[ 8.385695] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
[ 8.385699] calling netlbl_init+0x0/0x83 @ 1
[ 8.385702] NetLabel: Initializing
[ 8.385704] NetLabel: domain hash size = 128
[ 8.385707] NetLabel: protocols = UNLABELED CIPSOv4
[ 8.385736] NetLabel: unlabeled traffic allowed by default
[ 8.385741] initcall netlbl_init+0x0/0x83 returned 0 after 0 usecs
[ 8.385779] calling hpet_late_init+0x0/0xef @ 1
[ 8.385785] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 8.385793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 8.385804] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 8.399467] initcall hpet_late_init+0x0/0xef returned 0 after 13019 usecs
[ 8.399474] calling init_amd_nbs+0x0/0xaf @ 1
[ 8.399506] initcall init_amd_nbs+0x0/0xaf returned 0 after 0 usecs
[ 8.399511] calling clocksource_done_booting+0x0/0x5a @ 1
[ 8.399517] Switching to clocksource hpet
[ 8.399540] initcall clocksource_done_booting+0x0/0x5a returned 0 after 5 usecs
[ 8.399546] calling ftrace_init_debugfs+0x0/0x20a @ 1
[ 8.399602] initcall ftrace_init_debugfs+0x0/0x20a returned 0 after 48 usecs
[ 8.399608] calling tracer_init_debugfs+0x0/0x432 @ 1
[ 8.399727] initcall tracer_init_debugfs+0x0/0x432 returned 0 after 181 usecs
[ 8.399733] calling init_trace_printk_function_export+0x0/0x2f @ 1
[ 8.399743] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 3 usecs
[ 8.399748] calling event_trace_init+0x0/0x2c2 @ 1
[ 8.415740] initcall event_trace_init+0x0/0x2c2 returned 0 after 15603 usecs
[ 8.415749] calling init_kprobe_trace+0x0/0x8e @ 1
[ 8.415763] initcall init_kprobe_trace+0x0/0x8e returned 0 after 7 usecs
[ 8.415768] calling init_uprobe_trace+0x0/0x53 @ 1
[ 8.415780] initcall init_uprobe_trace+0x0/0x53 returned 0 after 5 usecs
[ 8.415786] calling init_pipe_fs+0x0/0x4a @ 1
[ 8.415839] initcall init_pipe_fs+0x0/0x4a returned 0 after 46 usecs
[ 8.415844] calling eventpoll_init+0x0/0xd7 @ 1
[ 8.415862] initcall eventpoll_init+0x0/0xd7 returned 0 after 12 usecs
[ 8.415867] calling anon_inode_init+0x0/0x59 @ 1
[ 8.415898] initcall anon_inode_init+0x0/0x59 returned 0 after 24 usecs
[ 8.415904] calling tomoyo_initerface_init+0x0/0x17d @ 1
[ 8.415911] initcall tomoyo_initerface_init+0x0/0x17d returned 0 after 0 usecs
[ 8.415915] calling aa_create_aafs+0x0/0x92 @ 1
[ 8.415922] initcall aa_create_aafs+0x0/0x92 returned 0 after 0 usecs
[ 8.415927] calling blk_scsi_ioctl_init+0x0/0x289 @ 1
[ 8.415934] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs
[ 8.415939] calling acpi_event_init+0x0/0x55 @ 1
[ 8.415967] initcall acpi_event_init+0x0/0x55 returned 0 after 21 usecs
[ 8.415972] calling pnp_system_init+0x0/0x12 @ 1
[ 8.416008] initcall pnp_system_init+0x0/0x12 returned 0 after 29 usecs
[ 8.416013] calling pnpacpi_init+0x0/0x8c @ 1
[ 8.416016] pnp: PnP ACPI init
[ 8.416053] ACPI: bus type pnp registered
[ 8.416775] pnp 00:00: [bus 00-ff]
[ 8.416783] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 8.416788] pnp 00:00: [io 0x0cf8-0x0cff]
[ 8.416794] pnp 00:00: [io 0x0d00-0xffff window]
[ 8.416800] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 8.416805] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 8.416810] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 8.416815] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 8.416820] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 8.416826] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 8.416831] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 8.416836] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 8.416841] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 8.416846] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 8.416851] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 8.416857] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 8.416868] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 8.416873] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 8.416878] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 8.416884] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 8.417023] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 8.417196] pnp 00:01: [io 0x0060]
[ 8.417202] pnp 00:01: [io 0x0064]
[ 8.417225] pnp 00:01: [irq 1]
[ 8.417294] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 8.417321] pnp 00:02: [irq 12]
[ 8.417393] pnp 00:02: Plug and Play ACPI device, IDs SYN1b22 SYN1b00 SYN0002 PNP0f13 (active)
[ 8.417426] pnp 00:03: [io 0x0000-0x001f]
[ 8.417432] pnp 00:03: [io 0x0081-0x0091]
[ 8.417436] pnp 00:03: [io 0x0093-0x009f]
[ 8.417441] pnp 00:03: [io 0x00c0-0x00df]
[ 8.417446] pnp 00:03: [dma 4]
[ 8.417508] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 8.417528] pnp 00:04: [mem 0xffc00000-0xffffffff]
[ 8.417596] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 8.417741] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 8.417876] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 8.417886] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 8.417910] pnp 00:06: [io 0x00f0]
[ 8.417921] pnp 00:06: [irq 13]
[ 8.417987] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 8.418014] pnp 00:07: [io 0x002e-0x002f]
[ 8.418019] pnp 00:07: [io 0x004e-0x004f]
[ 8.418024] pnp 00:07: [io 0x0061]
[ 8.418029] pnp 00:07: [io 0x0063]
[ 8.418033] pnp 00:07: [io 0x0065]
[ 8.418038] pnp 00:07: [io 0x0067]
[ 8.418042] pnp 00:07: [io 0x0070]
[ 8.418047] pnp 00:07: [io 0x0080]
[ 8.418052] pnp 00:07: [io 0x0092]
[ 8.418056] pnp 00:07: [io 0x00b2-0x00b3]
[ 8.418061] pnp 00:07: [io 0x0068-0x006f]
[ 8.418066] pnp 00:07: [io 0x0480-0x048f]
[ 8.418071] pnp 00:07: [io 0xffff]
[ 8.418075] pnp 00:07: [io 0xffff]
[ 8.418080] pnp 00:07: [io 0x0400-0x047f]
[ 8.418085] pnp 00:07: [io 0x1180-0x11ff]
[ 8.418090] pnp 00:07: [io 0xfe00]
[ 8.418095] pnp 00:07: [mem 0xff800000-0xff800fff]
[ 8.418234] system 00:07: [io 0x0480-0x048f] has been reserved
[ 8.418241] system 00:07: [io 0xffff] has been reserved
[ 8.418247] system 00:07: [io 0xffff] has been reserved
[ 8.418253] system 00:07: [io 0x0400-0x047f] has been reserved
[ 8.418259] system 00:07: [io 0x1180-0x11ff] has been reserved
[ 8.418265] system 00:07: [io 0xfe00] has been reserved
[ 8.418272] system 00:07: [mem 0xff800000-0xff800fff] has been reserved
[ 8.418280] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 8.419066] pnp 00:08: [mem 0xff810000-0xff81000f]
[ 8.419081] pnp 00:08: [irq 6]
[ 8.419166] pnp 00:08: Plug and Play ACPI device, IDs WEC1040 (active)
[ 8.419189] pnp 00:09: [io 0x0070-0x0077]
[ 8.419200] pnp 00:09: [irq 8]
[ 8.419273] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 8.419506] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 8.419512] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 8.419517] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 8.419522] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 8.419527] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 8.419531] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 8.419655] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 8.419662] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 8.419668] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 8.419674] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 8.419680] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 8.419686] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 8.419694] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 8.816954] pnp: PnP ACPI: found 11 devices
[ 8.816959] ACPI: ACPI bus type pnp unregistered
[ 8.816967] initcall pnpacpi_init+0x0/0x8c returned 0 after 391548 usecs
[ 8.816973] calling chr_dev_init+0x0/0xc1 @ 1
[ 8.821812] initcall chr_dev_init+0x0/0xc1 returned 0 after 4717 usecs
[ 8.821819] calling firmware_class_init+0x0/0x19 @ 1
[ 8.821847] initcall firmware_class_init+0x0/0x19 returned 0 after 19 usecs
[ 8.821852] calling thermal_init+0x0/0x8a @ 1
[ 8.821882] initcall thermal_init+0x0/0x8a returned 0 after 22 usecs
[ 8.821888] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 8.821896] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
[ 8.821901] calling cpufreq_gov_dbs_init+0x0/0x95 @ 1
[ 8.821910] initcall cpufreq_gov_dbs_init+0x0/0x95 returned 0 after 2 usecs
[ 8.821916] calling init_acpi_pm_clocksource+0x0/0xdf @ 1
[ 8.826454] initcall init_acpi_pm_clocksource+0x0/0xdf returned 0 after 4426 usecs
[ 8.826461] calling pcibios_assign_resources+0x0/0xfb @ 1
[ 8.826540] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 8.826549] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 8.826565] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 8.826572] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 8.826607] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 8.826613] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 8.826619] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 8.826625] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 8.826638] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 8.826647] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 8.826655] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 8.826662] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 8.826684] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0400000-0xc04000ff 64bit]
[ 8.826706] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 8.826713] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 8.826719] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 8.826728] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 8.826735] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 8.826745] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 8.826751] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 8.826761] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 8.826770] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 8.826781] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 8.826788] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 8.826797] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff]
[ 8.826806] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 8.826817] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[ 8.826824] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 8.826833] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 8.826842] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 8.826853] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 8.826928] pci 0000:00:1e.0: setting latency timer to 64
[ 8.826937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 8.826942] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 8.826948] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 8.826953] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 8.826958] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 8.826963] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 8.826968] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 8.826973] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 8.826979] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 8.826984] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[ 8.826990] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 8.826995] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 8.827001] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf30fffff]
[ 8.827006] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 8.827012] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 8.827017] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 8.827022] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 8.827028] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 8.827033] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 8.827038] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 8.827044] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 8.827049] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 8.827054] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 8.827060] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[ 8.827065] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[ 8.827070] pci_bus 0000:0d: resource 9 [mem 0x000e0000-0x000e3fff]
[ 8.827075] pci_bus 0000:0d: resource 10 [mem 0xc0000000-0xdfffffff]
[ 8.827080] pci_bus 0000:0d: resource 11 [mem 0xf0000000-0xfebfffff]
[ 8.827089] initcall pcibios_assign_resources+0x0/0xfb returned 0 after 603 usecs
[ 8.827094] calling sysctl_core_init+0x0/0x2c @ 1
[ 8.827127] initcall sysctl_core_init+0x0/0x2c returned 0 after 26 usecs
[ 8.827132] calling inet_init+0x0/0x2b0 @ 1
[ 8.827183] NET: Registered protocol family 2
[ 8.828838] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 8.835174] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 8.835994] TCP: Hash tables configured (established 524288 bind 65536)
[ 8.836097] TCP: reno registered
[ 8.836120] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 8.836188] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 8.836428] initcall inet_init+0x0/0x2b0 returned 0 after 9065 usecs
[ 8.836436] calling af_unix_init+0x0/0x52 @ 1
[ 8.836443] NET: Registered protocol family 1
[ 8.836457] initcall af_unix_init+0x0/0x52 returned 0 after 15 usecs
[ 8.836464] calling pci_apply_final_quirks+0x0/0x108 @ 1
[ 8.837007] pci 0000:01:00.0: Boot video device
[ 8.837205] PCI: CLS 64 bytes, default 64
[ 8.837213] initcall pci_apply_final_quirks+0x0/0x108 returned 0 after 721 usecs
[ 8.837219] calling populate_rootfs+0x0/0x107 @ 1
[ 8.837322] Unpacking initramfs...
[ 8.977602] Freeing initrd memory: 2848k freed
[ 8.979438] initcall populate_rootfs+0x0/0x107 returned 0 after 138870 usecs
[ 8.979446] calling pci_iommu_init+0x0/0x3e @ 1
[ 8.979451] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 8.979457] software IO TLB [mem 0xbb8a1000-0xbf8a0fff] (64MB) mapped at [ffff8800bb8a1000-ffff8800bf8a0fff]
[ 8.979463] initcall pci_iommu_init+0x0/0x3e returned 0 after 10 usecs
[ 8.979470] calling calgary_fixup_tce_spaces+0x0/0x103 @ 1
[ 8.979477] initcall calgary_fixup_tce_spaces+0x0/0x103 returned -19 after 0 usecs
[ 8.979484] calling ir_dev_scope_init+0x0/0x16 @ 1
[ 8.979492] initcall ir_dev_scope_init+0x0/0x16 returned 0 after 0 usecs
[ 8.979531] calling i8259A_init_ops+0x0/0x24 @ 1
[ 8.979540] initcall i8259A_init_ops+0x0/0x24 returned 0 after 2 usecs
[ 8.979545] calling vsyscall_init+0x0/0x27 @ 1
[ 8.979560] initcall vsyscall_init+0x0/0x27 returned 0 after 8 usecs
[ 8.979564] calling sbf_init+0x0/0xf2 @ 1
[ 8.979571] Simple Boot Flag at 0x57 set to 0x1
[ 8.979579] initcall sbf_init+0x0/0xf2 returned 0 after 8 usecs
[ 8.979584] calling init_tsc_clocksource+0x0/0x85 @ 1
[ 8.979623] initcall init_tsc_clocksource+0x0/0x85 returned 0 after 30 usecs
[ 8.979629] calling add_rtc_cmos+0x0/0x96 @ 1
[ 8.979643] initcall add_rtc_cmos+0x0/0x96 returned 0 after 8 usecs
[ 8.979649] calling i8237A_init_ops+0x0/0x14 @ 1
[ 8.979656] initcall i8237A_init_ops+0x0/0x14 returned 0 after 1 usecs
[ 8.979662] calling cache_sysfs_init+0x0/0x5f @ 1
[ 8.979799] initcall cache_sysfs_init+0x0/0x5f returned 0 after 127 usecs
[ 8.979805] calling intel_uncore_init+0x0/0x348 @ 1
[ 8.979813] initcall intel_uncore_init+0x0/0x348 returned 0 after 1 usecs
[ 8.979819] calling thermal_throttle_init_device+0x0/0x93 @ 1
[ 8.979836] initcall thermal_throttle_init_device+0x0/0x93 returned 0 after 10 usecs
[ 8.979841] calling amd_ibs_init+0x0/0x447 @ 1
[ 8.979848] initcall amd_ibs_init+0x0/0x447 returned -19 after 0 usecs
[ 8.979853] calling ioapic_init_ops+0x0/0x14 @ 1
[ 8.979860] initcall ioapic_init_ops+0x0/0x14 returned 0 after 1 usecs
[ 8.979865] calling add_pcspkr+0x0/0x5e @ 1
[ 8.979939] initcall add_pcspkr+0x0/0x5e returned 0 after 65 usecs
[ 8.979947] calling start_periodic_check_for_corruption+0x0/0x50 @ 1
[ 8.979954] initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs
[ 8.979959] calling audit_classes_init+0x0/0xaf @ 1
[ 8.979969] initcall audit_classes_init+0x0/0xaf returned 0 after 4 usecs
[ 8.979975] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 8.979991] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 8 usecs
[ 8.979996] calling proc_execdomains_init+0x0/0x22 @ 1
[ 8.980044] initcall proc_execdomains_init+0x0/0x22 returned 0 after 8 usecs
[ 8.980048] calling ioresources_init+0x0/0x3c @ 1
[ 8.980058] initcall ioresources_init+0x0/0x3c returned 0 after 3 usecs
[ 8.980062] calling uid_cache_init+0x0/0x8c @ 1
[ 8.980082] initcall uid_cache_init+0x0/0x8c returned 0 after 14 usecs
[ 8.980087] calling init_posix_timers+0x0/0x203 @ 1
[ 8.980097] initcall init_posix_timers+0x0/0x203 returned 0 after 4 usecs
[ 8.980101] calling init_posix_cpu_timers+0x0/0xc5 @ 1
[ 8.980108] initcall init_posix_cpu_timers+0x0/0xc5 returned 0 after 0 usecs
[ 8.980112] calling proc_schedstat_init+0x0/0x22 @ 1
[ 8.980120] initcall proc_schedstat_init+0x0/0x22 returned 0 after 2 usecs
[ 8.980125] calling init_sched_debug_procfs+0x0/0x2c @ 1
[ 8.980133] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 2 usecs
[ 8.980138] calling snapshot_device_init+0x0/0x12 @ 1
[ 8.980250] initcall snapshot_device_init+0x0/0x12 returned 0 after 102 usecs
[ 8.980256] calling create_proc_profile+0x0/0x280 @ 1
[ 8.980263] initcall create_proc_profile+0x0/0x280 returned 0 after 0 usecs
[ 8.980268] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 8.980274] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 1 usecs
[ 8.980279] calling init_clocksource_sysfs+0x0/0x52 @ 1
[ 8.980364] initcall init_clocksource_sysfs+0x0/0x52 returned 0 after 76 usecs
[ 8.980369] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 8.980378] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 3 usecs
[ 8.980383] calling alarmtimer_init+0x0/0x1d9 @ 1
[ 8.980451] initcall alarmtimer_init+0x0/0x1d9 returned 0 after 60 usecs
[ 8.980457] calling init_tstats_procfs+0x0/0x2c @ 1
[ 8.980465] initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs
[ 8.980470] calling futex_init+0x0/0x60 @ 1
[ 8.980487] initcall futex_init+0x0/0x60 returned 0 after 11 usecs
[ 8.980492] calling proc_dma_init+0x0/0x22 @ 1
[ 8.980499] initcall proc_dma_init+0x0/0x22 returned 0 after 2 usecs
[ 8.980504] calling proc_modules_init+0x0/0x22 @ 1
[ 8.980512] initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs
[ 8.980517] calling kallsyms_init+0x0/0x25 @ 1
[ 8.980524] initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs
[ 8.980529] calling crash_save_vmcoreinfo_init+0x0/0x472 @ 1
[ 8.980591] initcall crash_save_vmcoreinfo_init+0x0/0x472 returned 0 after 55 usecs
[ 8.980596] calling crash_notes_memory_init+0x0/0x37 @ 1
[ 8.980611] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 8 usecs
[ 8.980616] calling pid_namespaces_init+0x0/0x2d @ 1
[ 8.980638] initcall pid_namespaces_init+0x0/0x2d returned 0 after 15 usecs
[ 8.980643] calling ikconfig_init+0x0/0x39 @ 1
[ 8.980651] initcall ikconfig_init+0x0/0x39 returned 0 after 2 usecs
[ 8.980656] calling audit_init+0x0/0x14c @ 1
[ 8.980660] audit: initializing netlink socket (disabled)
[ 8.980685] type=2000 audit(1358463485.979:1): initialized
[ 8.980694] initcall audit_init+0x0/0x14c returned 0 after 31 usecs
[ 8.980699] calling audit_watch_init+0x0/0x3a @ 1
[ 8.980706] initcall audit_watch_init+0x0/0x3a returned 0 after 1 usecs
[ 8.980710] calling audit_tree_init+0x0/0x57 @ 1
[ 8.980727] initcall audit_tree_init+0x0/0x57 returned 0 after 10 usecs
[ 8.980732] calling init_kprobes+0x0/0x165 @ 1
[ 9.006964] initcall init_kprobes+0x0/0x165 returned 0 after 25610 usecs
[ 9.006970] calling hung_task_init+0x0/0x53 @ 1
[ 9.007063] initcall hung_task_init+0x0/0x53 returned 0 after 81 usecs
[ 9.007070] calling irq_pm_init_ops+0x0/0x14 @ 1
[ 9.007077] initcall irq_pm_init_ops+0I have figured out how to solve part of the problem. It was completely Xorg related, as you can see from the Xorg.0.log. I removed nouveau and installed Nvidia proprietary driver, in this way X doesn't timeout anymore but now I still have a problem with the time it takes X to start up. As you can see from these lines:
[ 20.141] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.141] (II) Loader magic: 0x818d80
[ 20.141] (II) Module ABI versions:
[ 20.141] X.Org ANSI C Emulation: 0.4
[ 20.141] X.Org Video Driver: 18.0
[ 20.141] X.Org XInput driver : 21.0
[ 20.141] X.Org Server Extension : 8.0
[ 44.585] (EE) systemd-logind: failed to get session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[ 44.585] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 44.586] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 44.586] (--) PCI: (0:1:0:0) 10de:0fe4:1043:11cd rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 44.586] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 44.586] (II) LoadModule: "glx"
There is quite a jump in the timestamps just where an error related with logind occurs. Is it normal or I have a problem? BTW, Xorg doesn't timeout anymore it seems.
Is there anyone who can help me? Maybe I have simply posted in the wrong section of the forum?
Last edited by Aliverix (2014-11-06 22:47:24) -
[SOLVED] kdm hangs for ~20 seconds after entering pw
Hi there,
since i made some updates recently kdm hangs for 20 or more seconds after entering the password.
I already updated font caches with `fc-cache -fv` but it didn't help.
Where can I start looking?
/var/log/kdm.log looks like this, but I honestly don't know what to make of it:
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
klauncher(303) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(297)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(297)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
(II) AIGLX: Suspending AIGLX clients for VT switch
setversion 1.4 failed: Permission denied
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Multiple definitions of the FOUR_LEVEL_KEYPAD key type
> Earlier definition ignored
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Thanks for your help!
vincent
Last edited by vincent7 (2014-05-16 21:57:27)sorry for bringing this up again...
In the meantime I switched from KDE to MATE Desktop, using LightDM and then sddm as Display Managers. The Problem is still the same: everything is starting and booting fine, it's maybe 15 seconds from pressing the ON switch on my laptop until the Login-Dialog of sddm appears. When I enter my password and hit "Enter" the display manager just waits like 20-30 seconds until somethings happens, and MATE is loaded.
This only happens on my first login, right after boot. When I logout and login again, it just takes some seconds until the desktop is loaded.
I looked into "journalctl", but it does not show anything suspicious. It's just a 20-30 second black hole between entries.
I get the exact same behaviour when I disable the display manager and boot into console login.
Can someone please help me with that? -
ITunes hangs for 15 seconds at the start of songs
Hi,
My iTunes is hanging for 15 seconds at the beginning of songs and videos, and is driving us crazy. It seems to hunt around for something, but have no idea what. iTunes is on an internal hard drive. For some reason this doesn't happen when I run the files through Apple TV. Any thoughts? Thanks.hi,
according to your profile, you're running OS X 10.5.4. if that is correct, get the 10.5.8 combo updater from here http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate.
repair premissions using *disk utility* before and after running the installer. next, check *software update* from the menu and install any updates offered.
if you +just didn't update+ your profile, try *removing iTunes completely* (click here and follow the instructions), then download the current version from here: http://www.apple.com/itunes/download/.
also, check if you have read & write permissions for your iTunes music folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
please post back with results.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly) -
When uploading an image from my documents firefox 5 hangs for several seconds to a minute.
This in on an XP SP3 system. The problem seemed to have started with 3.6 and has been a constant issue even with current versions. When I upload any file firefox just hangs for a short while then it's fine for the rest of the day only to come back the next day. I relocated "my documents" and it went away, then a few weeks ago I did a clean install and the problem seemed to be gone for good. Now the problem is back.
I thought it might be a disk issue, but it checks out fine using check disk.The speed of image searching isn't a problem for me. The trouble is, the automatic zoom function is lightning fast and I find it disturbing to the point that it makes me feel very ill.
I very much want a way of suppressing it.
Maybe you are looking for
-
Greetings!! I have recently been playing around with the amazing power of Python in Labview and have built some very functional VIs that utilize this tactic. However I now find myself at a bind. Everything runs great in the IDE, but not so great as a
-
I used to play my guitar thru my PC using a line 6 Guitar port, Then I could play along with Guitar Pro tabs or MP3's. Now I have the Guitar Pro software on my Mac Air and I neeed an interface (which I can get at the Appple store- guitar plug to USB)
-
Why doesn't my trigger window open whenever i double-click on one or create a new one?
Hello, Whenever i open a new trigger, or double-click on a trigger there should open a window to add code, but there isn't opening anything anymore. I don't remember whenever this happened, because i haven't been using Edge for some time now. It alre
-
I had a lot of trouble getting my router set up. Then it worked just fine. The next day my desktop couldn't get to the internet, but the wireless laptop could. Called Linksys and was on the phone for over an hour. They changed the ip address. Wo
-
How can you increase performance ?
Hello, I am building a site but it's framerate is very slow. I read some articles that Sprites are much faster then movieclips. For example i have 5 long movieclips (4300 pixels in width). These clips scroll in horizontal direction to get a paralla