JDeveloper 11.1.1.2.0 does not recognize some CVS files

Hi,
We have been using JDev 11.1.1.1.0 with no problems. We installed 11.1.1.2.0 into a SEPARATE directory (and did NOT migrate settings). We configured 11.1.1.2.0 as we had for 11.1.1.1.0.
All our applications use CVS for source control - we normally use WinCVS and JDeveloper on the same directory.
We then opened an application which we had previously been working in 11.1.1.1.0 (no file migration occurred - I assume because the jws and jpr are unchanged from 11.1.1.1.0 and 11.1.1.2.0). All the files are present (as expected) in the application navigator. However, we discovered that SOME of the files are NOT mark as being under CVS. So we are missing the version icon in the navigator and all the Versioning options (right-click) for those files are missing.
The files in these directories OK (have versioning):
Project Source Paths:
D:\appname\src\java (Java source directory)
D:\appname\src\web (Web app directory - often this is missing files in its ROOT directory, subdirs are OK.)
Resources:
D:\appname\src\config
The files in these directories are NOT OK (shown in navigator, but no versioning):
D:\appname\src\ant (contains .xml, .properties, etc)
D:\appname\src\lst (contains .lst)
- We did a fresh CVS checkout using JDeveloper - same problem.
- We tried playing with removing and readding resources from the Project Source paths. No luck.
Any ideas?
Thanks.
Bob

Hi Paul,
Restart did NOT fix it.
CVS configuration is fine - I created a CVS connection and successfully did a fresh check out of a project. Even this fresh checkout has the same files missing the "Versioning" status in the Application Navigator.
We're hoping it's a configuration setting... It may be a bug I suppose...
Thanks.
Bob

Similar Messages

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!

Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

Somehow my calender was erased. How do I restore it? I have time machine. Fortunately it was synched with Outlook, so I still have it there. But Ical does not recognize the Outlook file. Is there a way to restore from Outlook? resi

Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.

Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
God bless. Thanks again.

Downloaded photoshop CS6 to my new iMac. Opened photoshop but can't bring in a photo from iPhoto - get message that says photoshop does not recognize this type file. Suggestions?

I donwloaded photoshop CS6 to my new iMac. Opened photoshop but cannot openn a photo from iPhoto library - I get a message that says cannot complete our request becausse photoshop does not recognize this type file.
Suggestions?
Rick

You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

Lightroom 4 does not recognize some older JPG images (that Picasa and ACDsee show all right).

Lightroom 4 does not recognize some older JPG images (that Picasa and ACDsee show all right).

What is exiftool??
From: Rob Cole [email protected]
Sent: Saturday, March 30, 2013 5:35 PM
To: shaibeilis
Subject: Lightroom 4 does not recognize some older
JPG images (that Picasa and ACDsee show all right).
Re: Lightroom 4 does not recognize some older JPG images (that Picasa and
ACDsee show all right).
created by Rob Cole <http://forums.adobe.com/people/areohbee> in *Photoshop
Lightroom* - View the full
discussion<http://forums.adobe.com/message/5192327#5192327

HELP FAST! Need to go to my wedding-Lightroom 4 does not recognize Nikon D800 files

I try to import my d800 nef files and Lightroom does not recognize them and will not import. I looked on the site and it SAYS it supports them but nothing. I looked for a raw plugin but when I clicked the link it would not go anywhere. HELP! I don't want to shoot my wedding with this camera if LR can't support it and I have to return it to the camera store FAST if not.

Nidhaal Halid wrote:
Nikon D 800 is supported in the latest realease of camera raw. Make sure that you update the software to the latest version or download and install the latest version of Camera Raw 6.7 from the Adobe website.
But the question is about Lightroom. And Lightroom doesn't use any version of ACR. Lightroom 4 is somewhat compatible with ACR 6.7, and fully compatible with ACR 7.x. ACR 6.7 will read Lightroom 4 adjustments when an image is transferred to Photoshop, but it will not provide access to process 2012 sliders in ACR.

CS4 does not recognize some DNGs

My Panasonic GK2 creates raw files as RW2. I use (on my Mac) LightRoom 3.6 to import, convert to DNG and develop the files.
Photoshop CS4 Camera Raw 5.0 for Mac had been processing these without a problem. As of about 30 h. ago, it appears that my system no longer recognizes this format. DNG's from my Panasonic camera are greyed-out in Finder. In Adobe Bridge CS4 preview pane they are displayed with the DNG icon.
Please advise if update for Camera Raw is available, and if you think that might solve thie issue.
OTOH, believe I now have a viable work-around: after editing in LightRoom, export to PSD for further exiting in PS-CS4.

OK thanks, Station_two; I'm currently on a much older version of ACR. Downloading now.
See answer to next post regarding current results.
I used to see occasional update links automatically served, I believe, but could just as well be thiniking of other products. Surprised these do not come to us automatically.
============= Updated Posting ==============
Mac OSX 10.8.3 is not happy with the file just downloaded, Camera_Raw_5_7.zip.
Zip archive contains two files, Camera Raw.plugin ("Could not complete your request because Photoshop does not recognize this type of file."), and cameraprofiles.mpkg ("...can't be opened because it is from an unidentified developer. Your security preferences allow installation of only apps from the Mac App Store and identified developers").
I might be able to set back my preferences to allow the second to be installed, if that is the correct procedure. What do you think?
Not sure I mentioned this but I am still able process all DNGs using the Development tab of Lightroom 3. From there I can easily export to PSD for further editing in PS when needed. Also found that LR has a good print routine.
Still, a bit of a mystery why SOME of the Panasonic DNGs can be opened and others, of similar vintage, cannot.
Message was edited by: John W Cane

Lumia 920 does not recognize transferred media fil...

I am able to transfer media files (mp3) to the phone with my Ubuntu 12.04 with no problem at all. However, the phone does not recognize files when I go to Nokia Music application. Software says that all the Music "folders" (Albums, Genres etc.) are empty. Am I missing something here? Seems like no one else has this problem.
I have tried putting the mp3 files in all possible folders ( music, documents etc) on phone, but no luck. I have also tried several different mp3 files. Can anyone help me with this?

This was never a problem for me with my fisrt 920. I have just taken delivery of a replacement phone after I managed to smash the glass on thge first one last week. I have tried transferring albums and songs (in mpeg-4 format from my pc's file explorer, using the USB connector. File Explorer indicates that the files have copied correctly into the Lumia's Music folder but when I try to run Nokia Music it tells me that nothing has been transferred. So I check back on the pc with USB connector and, sure enough, File Explorer tells me that the folders and files ARE there.
What's happening on the Lumia 920? (By the way the X-Box Music App also tells me that nothing exists on my Lumia music folder).
Absolutely no problem transferring photos by this route.

My shuffle 2nd generation does not recognize some podcast in m4a format.

My shuffle does not recognize podcast form The Economist in m4a format. Nevertheless, it plays those fom T.E. in mp3 format, as well as many others podcast in m4a format w/o any problem.

If there is something not quite right about the iPod shuffle, click on the Restore button. This will restore the iPod to its original settings. If that does not work or is inaccessible, try the iPod Reset Utility.
http://support.apple.com/kb/HT1238
Both procedures will erase the iPod.

Elements 12 - does not recognize raw c2r files using EOS 70D

How to tell what version of Camera Raw is installed when Elements does not recognize the Canon raw extension? I have updated within the last five minutes.

SDMarianne wrote:
How to tell what version of Camera Raw is installed when Elements does not recognize the Canon raw extension? I have updated within the last five minutes.
to see what version of Camera Raw is installed, you can go to:
Help >> About Plug in >> Camera Raw
See this picture:
You can also try to update your version if it isn't version 8.5
There is also a possibility to use DNG converter to load any raw files from any cameras but see if this answers your question.

DNG Converter 6.4 does not recognize any RAW files

Hi,
I have updated DNG Converter from 6.2 RC to 6.3 and 6.4. DNG Converter 6.2 RC from Adobe Labs recognizes all my RAW files (Canon PowerShot S50, PowerShot SX1IS, EOS 400D). The official releases of 6.3 and 6.4 do not recognize any RAW files of these cameras.
I select a directory, where the raw files are located, but DNG Converter tells me that no files where selected. With 6.2 RC, I select the directory and everything just works fine.
What's wrong with this picture?
atb,
MOS-6502

Ahh, I forgot:
System is Windows Vista Ultimate 32bit, patched up to date.
atb,
MOS-6502

DVD drive does not recognize some media on Satellite A30-514

I own a Satellite A30-514 laptop with Microsoft xp OS. Just lately, some DVD's (not games) will not play from the drive. some do some don't. It is not a region problem - they are all region 2. Windows does not read the disc when it is inserted and does not register a disc in the drive when I show 'my computer'. CD's all play normally. Could this be a driver (internal) issue or is my DVD CD combo just too old now?
Thanks Marie.

Hi
To give you some precise answer it will be interesting to know which DVDs are not readable. Meaning of word 'some media' is to general and not helpful to understand the problem.
Satellite A30 is pretty old notebook model and it is possible that ODD functionality is not good anymore. You can try to clean the lens.

Font Book does not recognize some Postscript type 1 font files

I am new to OS X and am trying to copy all of the fonts used under OS 9 (using Suitcase) to be available under OS X. I have copied all of my font folders into the correct location, but some of them do not appear in the font list within Font Book, and if I try to use the Add Fonts... menu to select these files they are grayed out.
The Finder shows all the problem fonts to be "PostScript Type 1 outline font", just as for the files which do work. Is there any reason some files may not work in the Font Book? Note that if the files are corrupted, I don't understand because they were (and still are) working fine under the Classic environment.
I'm not sure, but I don't think any of my TrueType files have similar problems. I have noticed that all of the PostScript Type 1 fonts which do work have an additional suitcase file in the folder, whereas the problem fonts do not. Does Font Book require a suitcase file to properly recognize and use the Type 1 files? I thought that the suitcase only contained the bitmapped fonts which are obsolete to OS X, but that's a guess...
Any help will be greatly appreciated.

Hi roxlankford,
Font Book can read PostScript fonts. But, as you've noted, you don't have the whole font. Type 1 PostScript fonts are a set. One file is a suitcase containing all of the low res bitmap screen fonts. The rest are the outline printer fonts. As an example, here's Adobe Garamond.
Adobe Garamond
AGarBol
AGarBolIta
AGarIta
AGarReg
AGarSem
AGarSemIta
The first file which I highlighted in green is the font suitcase of bitmap screen fonts. The rest are the outline printer fonts.
1) The files for a Type 1 PostScript font must have both the screen and printer fonts for a given set in order to work. They also must be in the same folder.
2) The suitcase of bitmap fonts will work alone, but output will be terrible since the system will print the fonts using the 72 dpi screen fonts in the suitcase if the outline portions are missing.
3) Having only the outline fonts will not work. You will get exactly what you are having problems with. You can see the fonts, but Font Book won't load them. That's not a problem with Font Book itself. No font manager will load outline fonts without the matching suitcase of screen fonts present.

Import does not recognize old image files that have no extension

Just discovered that the import facility does not see (or accept) old Mac image files that have no extension -- even if these files have a Mac "kind" that is an image such as "Adobe Photoshop file".
You can manually add an extension to the file (and respond to an "are you sure?" dialog). Then the file will be seen and accepted.
This is extremely dangerous (and painful to manually correct) since you think you are seeing all images in the import box, but you are not.
In fact, I deleted huge image directories after having satisfactorally (I thought) imported them into Aperture many months ago. Most of the old extension-less files had been updated and did have extensions in later versions. However, I missed one important image and looked everywhere for it.
By a miracle I had a backup of my image directories on a Power Book that I am retiring and finally noticed that the missing image was there just before deleting that directory too! I then figured out why this image (and many others) had not been imported. So, now I am going through manually and adding extensions.
Does anyone know a better way -- to get Aperture to recognize extension-less images? If not, this needs to fixed in the next version as it is a disaster waiting to happen.
Tom
Dual 2.7Ghz G5 ATI Radeon X800 XT 2.5 GB ram Mac OS X (10.4.6)

Well there's an idea...probably would need to go into Bridge <g> to do that most efficiently .. or Automator.
It turns out that I already had added extension to most (but not all) images in my main image directory and so they got into Aperture alright. I just have to go through all the images in the backup I just found (where many did not get extensions) to find the ones that Aperture missed. So far, there have been just a couple more...
The real problem is that Aperture should not be missing these, even if they are archaic. At the very least, Aperture's import should give a warning that there are files in a folder that it is not going to import AND is not even showing. Otherwise this is a serious gotcha!
Tom

JDeveloper 11.1.1.2.0 does not recognize some CVS files

Similar Messages

Maybe you are looking for