JDeveloper 11.1.1.4 Update Center - Updates not recognized

I am installing JDev 11.1.1.4 on a brand new laptop. Connected to all the Update Center repositories to download everything out there. The UC goes through the download and application process but does not seem to update my installation. Reason I know this is I return to the Update Center and ALL of the updates I just downloaded and applied are still listed. Barring going and downloading all the updates manually and doing the "install from file" thing, what's the resolution?
Anybody else seen this behavior? It isn't a network connectivity thing as I see all the repositories and updates and it actually takes a while d/l all the updates. Just doesn't seem to be recognized by my JDev as applied.

I think the issue with these is that the min and max versions in the extension files haven't been set properly by the extension developers, so they continue to show up in the UC, even when they may have been installed. I'm looking into it.
The harvestor extension for instance, installs a lot of files in the {ORACLE_HOME}/jdeveloper/harvestor folder, but I don't have a clue what this is really supposed to do so it may very well be installed properly and I just don't know where the interface is located to run it.
The AIA Service Constructor 3.0 is the only one that is publicly released and I just pushed an update from the team that should remove the issue that you're seeing. It does install even though it still shows up in the UC. Take a look at Tools --> Preferences --> Extensions and you'll see it in there.
The other AIA and Guide are from the Internal UC and they can be doing just about anything. Consider that UC beta and you get what you get. :-)
--jb

Similar Messages

HT4061 got iph 4s; using windows 8; downloaded latest update and iphone software update center could not be contacted or is unavailable......?? disabled firewall, disconnected all other usb devices, still not restoring; any one have any suggestions?

iph 4s, using windows 8; downloaded latest update 6 for iphone and iphone software update center could not be contacted or is not available; tried troubleshooting; removed other usb connections and restarted computer; still will not connect to iphone software update center; any suggestions?

I noticed the Windows Firewall Entry in the diagnostics, so I did get that part squared away...
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-07 17:52:33.
Still unable to detect the iPhone though.

Macbook Leopard Update- Hard drive not recognized?!?!

Question- What do you think caused this problem, and how can I best fix it?
(See below for information)
Well, I finally decided to update to Leopard. I put the disk in my Macbook, and everything went smoothly as it verified the installation DVD- until the end of the verification, that is. A message screen would pop up telling me the disk was dirty. "Okay," I thought,"No problem." I was a bit puzzled, though, because the installation with the same Family Pack disk went fine on my father's Mac. I cleaned the disk, and tried again. And again. Each time, I was greeted with the same message at the end of the verification. Frustrated, I took the disk and my laptop to Best Buy, hoping someone could help me there. We ran the installation again... to no surprise, the same problem occurs. This time, though, when we quit the installer and try to reboot, after the gray screen with the apple at the beginning, we are greeted with a black screen with one command line. NOT GOOD! We rebooted the computer again, this time starting up with a disk to check the permissions and hard drive. The diagnosis: The permissions on my Mac are screwed up, so it's not recognizing the hard drive. The Best Buy guy claims the permissions have been messed up since I bought the Mac, and everything will be just fine and dandy after I transfer the data to another computer, install the Tiger disk that my Macbook came with, update to Leopard, then transfer the data back to my Mac. I'm taking my Mac to the closest Apple store (about 2 hours away) for advice from the pros on Saturday. Until then, I'm hesitant to even turn the thing on, out of fear it will spontaneously erase the data or something to that extent.
Question: (in case you forgot)What do you think caused this problem, and how can I best fix it?

Unplugging worked!!!
I have no idea what PRAM is but someone said that unplugging your computer resets it so, I thought I'd give unplugging a shot. So, I shut down my computer and unplugged it. I also unplugged the power on the HD. (because I wasn't sure which one they were talking about.)
Anyway, I went away for about five minutes.
I came back plugged in the HD power first. Then, I plugged in the power cord for the computer and turned it on.
As soon as I logged in I was asked if I wanted to use my external HD for Time Machine backups.
I saw the icon for the HD on the Desktop where is belongs. I can open the drive and access the files with no problem.
Try this if you haven't yet.

IOS5 Update causes Device not recognized in iTunes for Windows

iOS: Device not recognized in iTunes for Windows
I did an iPad1 IOS5 update and on the reboot could not get iTunes to recognize my iPad.
I did all the recommended troubleshooting to no avail. So I called this morning and while on hold I put my password back on my device just as before and BAM iTunes now recognizes device and is doing my restore.
So if you do a backup of your device before the update and you have it password protected, it won't recognize the device until you go through and setup a new device and put your password back to what is was before, then BAM you're good! Good Luck and hopefully you won't have to spend the day I did figuring this out.

Hey there andrijfrommississauga,
I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT204406 Updated software. iTunes not recognizing devices.

I recently updated my Mac with Mac OS Lion to get it to version 10.6. Now my iTunes is not recognizing any of my devices nor letting me purchase music in iTunes. What am I missing? How do I get my devices recognized with this new software version?

Welcome to the Apple Support Communities
The latest iTunes version is 11.0.1. Open iTunes > About iTunes to check the version, and if you don't have this version, open  > Software Update to install the most recent version

[Solved] After update, media keys not recognized.

After I updated today, my play, stop, forward and back keys work, but not recognized in xbindkeys -mk. My vol up, down and mute do not work and are not recognized. I also cannot ctrl+alt+backspace to restart x.
Last edited by haxit (2009-05-02 15:26:49)

Acecero wrote:
haxit wrote:I also cannot ctrl+alt+backspace to restart x.
Add this
Option "DontZap" "false"
to the "ServerFlags" Section in the xorg.conf file.
Zapping has been disabled by default with xorg-server 1.6
Thanks a lot.

After iTunes 7.6 update, iPhone is not recognized by iTunes

I plugged in iPhone after iTunes update and a dialog box popped up that says "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the iPhone, then try again."
Phone is 1.1.3 firmware (update earlier in week and all was working great).
I have wiped software, cleaned registry keys, and reinstalled iTunes on XP computer. I ran a restore process on the iPhone and bricked it. Installed iTunes on a backup Vista 64 Ultimate machine (iTunes works on this platform now, yay!) and restored the phone.
Still hosed on XP, however.

This is happening to me too, but I have an iTouch though. I guess I will try to restore it on another computer if it worked for you.

I have a 3g iphone i updated phone now not recognizing sim card

phone worked good till did update now wont recognize sim cared dont know what to do cant do any thing with it help i have t mobiel siervice any help with this problem would be great lol it ***** not bein abel to use it at all

Identify iPhone Models
http://support.apple.com/kb/HT3939
It is unclear whether you have an iPhone 3G or 3Gs...
If a 3G... iOS 4.2.1 is as high as it will go...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Update installed but not recognized

I have a numeric alert (1) for an update in App store. For Aperture.
Yet the information stated I have Installed it. It is greyed out.
I can't get rid of this annoying notification. I sign out/in.
restart Mac.
open close Aperture.
but it persists.
Why?

This is an annoying and regularly arising nuisance.   It really is time Apple did something about it.
I've mislaid the thread link but Dah*veed wrote recently to offer the following solution.    Hope he won't mind me repeating it.
'You could try reindexing your HDD.   The MAS uses the Spotlight indexing in determining what apps need updating.   Go to Systems Preferences / Spotlight/ Privacy; add your Hdd to the list then remove it from the list.   Spotlight will then reindex your HDD.'

Firmware update failed hdd not recognizing now

my 1tb mypassport was working perfectly fine untill i tried to upgrade firmware. it failed and now hdd is nor being recognized. no ticking sound. lifht turns on windows vive usb conection sound but nothing appears no error or driveplz help me.i have very iortanr data on itthanks

The drive is probably bricked. I only do the firmware updates if there is a problem with the drive or a security issue. Sometimes if it ain't broke don't fix it is the best policy!Joe

SMC-firmware update 1.4 not recognized

Recently I downloaded the SMC-firmware update 1.4 because my new L-shaped MagSafe power adapter was not working with my computer. For a day or so, I was relieved because the update appeared to fix the charger, but then it stopped working altogether again. After trying multiple methods to fix this (unplugging the adapter, trying different outlets, resetting the SMC, etc.), I discovered that my computer was still running SMC version 1.27f3. I've tried downloading the update manually, but every time it says that my computer doesn't need it. Any advice on how I can actually update the SMC?

It turns out my adapter was actually broken. I went to the Apple store and they replaced it with a new one. The guy at the Genius Bar said the SMC update was only for MacBooks and that the L-shaped adapters should work with MacBook Pros.

My Ipod Will Not Update or is not recognized by computer

See the problem is i had to reformat my computer recently like yesterday which was saturday 23rd 2006 because my sound wasnt wrking. I got my sound to work and uploaded all songs back to my ipod. I connect it and it says new device found in the right side of the computer. I click it says new device found search for hardware? and i say yes and it says no hardware found from the search. Now i cannot upload songs to my ipod there is no removable thing that comes on my computer. The ipod will only recharge. This happened to me before as well. What i did was i reformatted my comptuer again but theres two ways to reformat it and i chose the second one and it worked. So im guessing the second way to reformat is right. I do not wanna reformat again cuz i downloaded so many programs and reinstalled a lot spent almost 6 hours on it. Is there any way to gett my ipod working?
Windows XP

See the problem is i had to reformat my computer recently like yesterday which was saturday 23rd 2006 because my sound wasnt wrking. I got my sound to work and uploaded all songs back to my ipod. I connect it and it says new device found in the right side of the computer. I click it says new device found search for hardware? and i say yes and it says no hardware found from the search. Now i cannot upload songs to my ipod there is no removable thing that comes on my computer. The ipod will only recharge. This happened to me before as well. What i did was i reformatted my comptuer again but theres two ways to reformat it and i chose the second one and it worked. So im guessing the second way to reformat is right. I do not wanna reformat again cuz i downloaded so many programs and reinstalled a lot spent almost 6 hours on it. Is there any way to gett my ipod working?
Correction to the top it shud be i got it bak into itunes but wont upload onto ipod

Game Center ID not recognized

After I updated my iphone to IOS 5 and sync my apps, Apple ID and password are fine but the game center ID (nickname) is not. it didn't recognize my game center ID when I tried to set it up. Some of my apps(games) are linked to game center and now when I played the games, it goes back to the first level. is this normal?

https://devforums.apple.com/community/ios
Integration Technologies
Game Center, iAd, Push Notifications, In App Purchase, Location and Maps

Xperia z2 is not recognizing by PC compannion after downloading the update.

i tried to update my phone through pc companian. after installing first time the pc companian recognized the phone but after downloading the update it is not recognizing the phone for updating the phone. tryed to uninstall in install it but not worked. my os is windows 7 proffitional. give the solution

Don't worry about it, if you don't know what it is, chances are that you don't know how to unlock it. Have you try the basic, a different USB port and/or cable? Have you disabled your antivirus and firewall before running PCC?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Why can't I use the update center in 9i Jdeveloper any more?

why can't I use the update center of 9i jdeveloper with my otn username and password anymore?
Is there any problem?

Hi,
We're aware of this issue and are looking into it.
Thanks,
Brian
JDev Team

JDeveloper 11.1.1.4 Update Center - Updates not recognized

Similar Messages

Maybe you are looking for