JDeveloper 11g is extremely slow when embedded server started

Oracle Jdev experts,
My machine configuration is - 2GB RAM, Intel Core2 Duo 2.4 GHz processor, 160GB HDD, Windows XP Professional
As such jdev itself runs on slower side as compared to other applications. Still it is manageable until I start embedded server.
After I start embedded server, my machine becomes terribly slow. I cannot open any other application..even opening notepad or blank browser window takes 5 min.
Available physical memory drops to less than 100MB which was around 1.4 GB before starting jdev. Please note that I had opened only jdev in the meantime.
Is there any way I can improve jdev performance and save significant time working on it?
Any suggestion in this regard is highly appreciated.
Thanks in advance

2GB, even though it may meet the "minimum" requirements is probably too low.
[url http://blogs.oracle.com/shay/2006/03/29#a104]This is a few years old, but has some good tips.
JOhn

Similar Messages

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Zen X-Fi2 extremely slow when loading playlists!

0Zen X-Fi2 extremely slow when loading playlists!?I recently purchased a Zen X-Fi2 64gb. I'd been waiting for a player of this size for a few years now but Creative was behind the power curve so I temporarily switched to an Archos 80gb. After the Archos began to annoy me I ended up just going with the Zen 32gb flash based player. It works/ed great. This new Zen X-Fi2 however is unbearably slow! I don't mind quite sometime to rebuild the library once the initial sync is done but when it takes 5 minutes to load a playlist (3000+ songs) then I get upset. It takes so long to load said playlist that the player shuts off before it has time to load all the songs. I can't even just click play right away like I could on the Zen. The only way I've been able to get around it is to tap the screen twice. Once to load the playlist (which takes forever if it's more than 00 songs) and again to play once the lengthy loading process is over with. However even then it doesn't load all the songs. I've been communicating with tech support about this with no resolution in sight. All they keep telling me is how 'normal' it is for a player to load a large number of songs. My Zen which is an MTP player syncs and plays music much faster! Is there anyway to possibly upgrade this to an MTP player?

Hi Vokivolli,
Almost 2 months on from your original post I see that you have received no reply from an administrator. Are these problems still persisting with your player? I have an X-Fi Style too and am experiencing the same problems. Like you I was hoping that firmware updates would address the problem. I don't think that the Style is a priority for Creative and unfortunately I don't see them bothering to solve these issues. Hope I'm wrong cos otherwise I love the X-Fi Style.

IOS6 extremely slow when updateApps

iOS6 extremely slow when updateApps on my iPad2. why?

Try clearing history and the cache...
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaning boxes then click Reset.
Quit and relaunch Safari.
See if that made a difference.

IPhone 6 and 6 plus camera extremely slow when using flash

I have noticed that the iPhone 6 and 6 plus camera is extremely slow when using flash, it is definitely slower than iPhones 5 and 5s.
Any explanation/solution for this?

I Have done some more testing and it seems turning off HDR resolves the issue

How to add an object in JNDI when a server starts?

I have an integration app. The app contains EJB project. The project contains EJB which reads data from LDAP.
My first version of EJB contains the following code:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, strProvider);
env.put(Context.SECURITY_AUTHENTICATION, strAuth); env.put(Context.SECURITY_PRINCIPAL,strPrincipal); env.put(Context.SECURITY_CREDENTIALS,strCredentials);
DirContext dirCtx = new InitialDirContext(env); // exception
All connection properties are hardcoded and it is not a good practice.
Also I can put those properties into deployment descriptor. But I am going to have some EJBs and each EJB has to have those properties into descriptors. It is not useful.
My idea: I would like to have whatever object which is called automatically when a server starts; this object creates InitialDirContext and put the context into JNDI. All EJBs lookup the context by a name. But I don't know how to do that.
And another question: how to change connection properties dynamically? My idea is putting the properties in XML Cache. And my object (which creates InitialDirContext) reads the properties from XML Cache. Can I handle a message that my properties in XML Cache have been changed and in this cases my object reads new properties and calls rebind() to update InitialDirContext?
Thanks,
Ivan

To bind an object into the JNDI tree check the documentation here:
http://e-docs.bea.com/wls/docs81/jndi/jndi.html#475702
If this is to be used by all your applications that you deploy on the server check out the startup/shutdown class documentation here:
http://edocs.bea.com/wls/docs81/ConsoleHelp/startup_shutdown.html
Cheers
IV

Help-Cubes are not getting started when Analytical server started in 11.1.1

Installed Oracle Essbase Analytical server along with Shared Services, Provider Services and Integration Services thru EPM v11.1.1.3. Shared services and provider services on Windows 2003 and Essbase Analytical Services and Integration Services on UNIX/AIX. All the components got configured successfully. Copied the essbase.sec from the server which has previous version (v11.1.1.1.0) of Essbase. We have been encountering couple of problems. The first one is the applications(cubes) didn't start when the analytical server started. The second one is when trying to start using MAXL script, the applications took long time (more than 30 minutes) to start.
Any suggestions that you may have in resolving this are appreciated. Thanks,

In the application properties, is the box 'Start application when Essbase server starts' checked? If not, that's why they didn't automatically start. Also, once you started them manually, does it still take 30 minutes to start? Or is shutdown and startup faster now?
Sabrina

JDeveloper is becoming too slow when you work with web services

Hi,
I am trying to write some web services code but after generating the Java classes from the WSDL the IDE becomes extremely slow.
I need to wait 5-10 seconds each time while writing a word in Java editor. I tried to disable auto suggest and all the fancy things like that but could not make it faster.
Any suggestions ?
I am using JDeveloper 11g r1p1.
Thanks

Hi,
I don't have any backing bean for this project. I am implementing a web service by using a WSDL. I guess the problem is JDeveloper can't handle having so many Java files .
When I generate the Java classes from the WSDL I end up having hundreds of Java classes and some are a little long. Looks like it is the same behavior that you mentioned about having big backing bean classes..
For now I am using IntelliJ Idea for editing the Java code and I use JDeveloper for running only. Idea doesn't bother having that many Java files and works as it supposed to work.
Thanks

Extremely Slow when Opening a new tab

I have just bought my new Retina MacBook Pro after my 3 years Macbook Pro 13" is total lost and get the Mountain Lion OSX with latest 10.8.2 version
After migrating the MacOSX from Snow Leopard to Mountain Lion, my Mac is everything ok but without Safari.
Once I wanna open a webpage from bookmarks bar, I usually open a new tab then click one of webpage in one of the bookmarks bar. The problem was happened in this action.
After I opening a new tab which I have set to show top site rather than History (all top site are locked like a set of bookmarks), the system extremely slow down even I just move my mouse from one bookmark to another on the bookmarks bar, it still have a bit serious delay more than a second.
I have just tested, if i choose history not top site is shown when I am opening a new tab, the performance really better. However, when I scroll to somewhere all have thumbnails for those webpages, the performance still slow down but not yet as serious as the top site and I think becasue I have choose over 12 webpages for topsite (which are all have thumbnails).
My new Retina MacBook Pro is the lower default spec i7 2.3GHz and the version now is MacOSX 10.8.2 with Safari 6.0.1
one of place I want to mentioned is my Safari and Safari Webpage Content are over 500MB once I have opened. Is it common and normal? I feel really upset that my new Mac doesn't really faster than before but the older one is Core 2 duo and 4GB ram vs the new one is i7 2.3GHz and 8GB ram....oh my god

Try clearing history and the cache...
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaning boxes then click Reset.
Quit and relaunch Safari.
See if that made a difference.

Macbook Pro gets Extremely slow when itunes is open

When I launch Itunes my mac gets extremely slow. I mean so slow that right now it is open and i am watching my words catch up to my typing. If I play a song on itunes my processor doesn't go about 40% and it is still extremely slow. I even tried to wirelessly sync my iphone and it still is like this. Any one know why. I have lion with all updates. If I don't launch itunes I'm fine When I launch Itunes It drags like a mother...lol any and all help appreciated TIA!!

How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.

JDeveloper 11g & ADF: supported version of svn server/client question

Hi all,
I would like to setup a repository for our dev team, we are coming from jdev 10g with svn server 1.3.2 and tortise svn 1.4.8. After reading through John Stegeman's ADF Development Essentials documents, I noticed this article was published back in 2008 and the supported version at that time was 1.4x. What is the current supported svn server and client (i would like to use tortise svn in conjunction with jdev plugin) version for JDeveloper 11g?
Thanks,
Wes

Check out this: http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html
For 11.1.1.4:
Subversion 1.5, SVNKit 1.2
Subversion 1.6 2 , SVNKit 1.3 2
GNU CVS 1.11, CVSNT 2.5
Amit

Yoga 2 Pro - extremely slow when plugged to an external monitor with Windows 10

Hi! Like most of you, I was eager to take the step early and try Windows 10 (knowing the risk of running into some problems on the way). Everything works very smoothly, and Win10 is really delightful. The only major problem I've faced is that when I plug an external monitor, every action (launching Firefox for example) takes ages and many apps "doesn't respond". I've downloaded and installed all the drivers for Win10 (included the one for the graphic card). Any idea what is happening or what I could try? Best,François

Hi. I am suffering the exact same thing. But i think i narrowed down the issue:When i am not using an external monitor - everything works nicely.When I am using an external monitor (and laptop set to "Extend" mode) while laptop screen is open - everything works nicely.When i am using an external monitor (and laptop set to "Extend" mode) while laptop screen is closed - everything becomes extremely slow and laggy. I wish Lenovo support would provide a solution asap.

Videos are extremely slow when trying to view them

Here is the situation. I have been posting course material for over a year now, and everything had been working fine. Over the last week, any video that I try to view from our iTunes U site is taking at least 5 minutes to play, when I double click on the video I get the loading bar, the videos that are less than 30 minutes long take between 5 - 8 minutes to play, the ones that are over 30 minutes take between 10 - 15 minutes to play. This had never happened before, and the weird thing is that I can go to any other iTunes U site and view videos that are two hours long and it takes less than a minute to play. So I know its not my network bandwidth or I wouldn't be able to view other sites. I use an iMac with a 2.8 GHz Intel Core 2 Duo, 4 GB of Ram, bought specifically for iTunes U administration. I don't know what else to do. Any help or advice will be truly appreciated.
Ernesto
Oklahoma City University

I have also found our iTunes U site extremely slow for the past few weeks. It also took a long, long time to log into Admin. But at least for us, there has been a noticeable change (for the better) in the last few days.

Processing speed of my MacBook is extremely slow when opening applications, whether Mail, Safari or MSOffice

Problem description:
The processing speed of any function is extremely slow - such as opening Mail, Safari, clicking on a page within Safari, switching to MS Word, adding a window in Safari, loading a page from Safari. I get the spinning wheel most of the time before the action is completed. All other Macs which are newer in my home WiFi network operate just fine. I have done a top level (novice) check for malware, and haven’t found anything. Any help you can suggest would be truly appreciated! Thank you!
EtreCheck version: 2.1.8 (121)
Report generated March 25, 2015 4:45:43 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook (13-inch, Aluminum, Late 2008) (Technical Specifications)
    MacBook - model: MacBook5,1
    1 2 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM
        BANK 0/DIMM0
            1 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Replace Soon - Cycle count 675
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1280 x 800
        spdisplays_display_connector
System Software: ℹ️
    Mac OS X 10.6.8 (10K549) - Time since boot: 6 days 5:40:11
Disk Information: ℹ️
    TOSHIBA MK1653GSX disk0 : (149.05 GB)
        - (disk0s1) <not mounted> : 210 MB
        Macintosh HD A (disk0s2) / : 159.70 GB (39.03 GB free)
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Inc. Built-in iSight
    BUFFALO HD-PCFU3 931.51 GB
        - (disk1s1) <not mounted> : 210 MB
        Buffalo ExDrive (disk1s2) /Volumes/Buffalo ExDrive : 999.86 GB (805.75 GB free)
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.palm.ClassicNotSeizeDriver (3.2.1) [Click for support]
    [not loaded]    com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
        /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [not loaded]    org.samba.winbindd.plist [Click for support]
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.synology.CloudStation.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Dropbox    Application (/Applications/Dropbox.app)
    EvernoteHelper    UNKNOWN Hidden (missing value)
    Doodle iCal Connector    UNKNOWN (missing value)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    HP Scheduler    Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.6.6
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    nppanda3d: Version: Unknown [Click for support]
    Musicnotes: Version: 1.18.8 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    Unity Web Player: Version: UnityPlayer version 2.6.1f3 [Click for support]
    DirectorShockwave: Version: 11.5.0r596 [Click for support]
    iPhotoPhotocast: Version: 7.0
Safari Extensions: ℹ️
    Evernote Web Clipper
Audio Plug-ins: ℹ️
    iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
         2%    WindowServer
         0%    Synology Cloud Station
         0%    fontd
         0%    Finder
         0%    Dropbox
Top Processes by Memory: ℹ️
    307 MB    WebProcess
    129 MB    Safari
    97 MB    mds
    69 MB    Dropbox
    56 MB    WindowServer
Virtual Memory Information: ℹ️
    102 MB    Free RAM
    1.06 GB    Active RAM
    450 MB    Inactive RAM
    262 MB    Wired RAM
    2.47 GB    Page-ins
    846 MB    Page-outs

Before you do anything do you have a current backup? If not make one.
I don't see any of the usual software suspects associated with slow downs. You don't need the Seagate software, you should uninstall that.
Reset the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support and PRAM How to Reset NVRAM on your Mac - Apple Support
You only have 2GB of ram and could upgrade to 8GB, but Snow Leopard should run ok in 2GB.....not great but ok.
Start up in Safe Mode OS X: What is Safe Boot, Safe Mode? - Apple Support be paitient as it will take awhile to start as it checks and tries to repair any problems with the file system. Once it's completely started up you can restart normally.
Insert your Snow Leopard disc and restart while holding the C key. Run Disk Utility to repair the hard drive and permissions. While in Disk Utility check the SMART status of the hard drive, anything other than Verified indicates a problem with the hard drive.
Again, you only have 2GB of ram.....try restarting your Macbook every day.....it's been running for almost a week now.

PC extremely slow when files exchanged between LR and CS6

Thats what happens: I open a file in LR3.6, edit the file (.CR2) and open it via the context menue ("open in ...") in CS6 (as a copy with changes from LR). Changing/editing the picture works fine. Then I close it (CTRL W) with saving as .tif. Then the PC (WIN 7 Pro) becomes extremely slow (takes several minutes before it accepts the next click). Only way out seems to be to close LR and CS6. The situation is reproducable.
Any idea? Thank you! Knut

A couple of more ideas to try:
Remove develop presets: Lightroom 5.4 Library Module slow performance: FIX found!
Closing the metadata panel: Lightroom: LR5.2 - The Library Module is Painfully Slow

JDeveloper 11g is extremely slow when embedded server started

Similar Messages

Maybe you are looking for