JDeveloper 11g Using EJB, JPA AND ADF DOES NOT WORK IN VERSION 11.1.1.1.0

Hi all,
I'm facing serious problems after the migration from jdev 11.1.1.0 version to new release 11.1.1.1.0, as i published with a sample at
Problems with create new record o in JDev 11 R1
is this a big bug in the ide? Should i return to previous version?
Thanks in advance
Enrique

Hi,
my best recommendation is to work with customer supports in this testcase.
Frank

Similar Messages

Ichat is not working. tried using port 443 and still does not work

ichat not working. tried using port 443 and i stay on for about 45 seconds then it disconnects. Can you help?

HI,
Can you tell me the make and model of your routing device.
The 10 Second error message is caused by a break in the connection.
This could be the Wifi being dropped (if you are using WiFi) due to interference from other nearby routers.
It can be dues to setting or features of the router and if the experience has changed that could be due to a speed increase in your internet service.
If you are using Ethernet and having this issue it is much more likely to be a setting/feature issue.
Examples.
Netgears. These have a separate WAN set up page that lists either DoS or SPI as one of the things that can be Enabled or Disabled.
Linksys. If your model has a Security tab and this has Firewall then DoS and SPI are port of this.
Netopia devices Tend to have a 4 level Firewall which DoS and SPI are part of the two highest settings.
DoS = Denial Of Service and is a Threshold based "Protection" Feature.
it judges whether too much data is being sent to you (it was designed originally to stop people overloading Web Servers (many people, many refreshes).
iChat can outstrip the setting with most Internet Connections in most part of the world. (In fact iChat can send more data than most Video Streaming sites)
One thing you can do that may get around this is to reduce the Bandwidth used in iChat (iChat Menu > Preferences > Video Section > Bandwidth Limit drop down)
Try 500kbps
10:07 PM Wednesday; November 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

I would like a refund now. I bought this service this morning and it does not work as advertised. Reliable is not what I would use to describe this product. Cancel my subscription/refund my money and send me an email to the address I used when I signed up

I would like a refund now. I bought this service this morning and it does not work as advertised. Reliable is not what I would use to describe this product. Cancel my subscription/refund my money and send me an email to the address I used when I signed up.

Hi,
I just checked your account.
Your Adobe Export pdf service has been cancelled & refunded.
Regards,
Florence

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

My iphone bluetooth not connect to my hands free or parrot i have been using iphone 4s with6.0 software always worked now called apple no help so i restored my iphone 4 and that does not work i then tried my daughters iphone

my iphone 5 bluetooth not connect to my hands free or parrot i have been using iphone 4s with 6.0 software always worked now called apple no help so i restored my iphone 4 with 6.00 net work and that does not work i then tried my daughters iphone and blackberry and they connected
I then tried i phone 5 in my daughters and sons car and no luck. I cant get help from anyone its a joke

I found the solution to your problem. It solved mine right away and now I'm able to upload videos directly from my iPhone.
Go to this thread: https://discussions.apple.com/message/17366529#17366529#17366529

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Under what circumstances does mail "not leave the mails on the server"?
If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
If you mean something else, please explain your issue in more detail.

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess.

Purchased an App and it does not work. How can I get a refund for it.

I purchased an app for my son, for his ipad and it does not work. Halo Waypoint for $5.99. When you log in, it just starts loading then an message saying "Sign in Trouble, we couldn't sign you in to Xbox live. Your windows Live ID information is correct, but Xbox Live is unavailable. PLease try again later. We have been trying to for the past 4 days. Reading the reviews it appears that several people have the same problem. So how can we get our money back?

pituiri wrote:
I purchased an app for my son, for his ipad and it does not work. ...
Contact the Developer of the App...
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

My Apple TV (2nd Gen) woun't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..

My Apple TV (2nd Gen) won't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..
If I mess this up ... sorry it my first time....

I found this after posting here:
http://trick77.com/2011/02/04/apple-tv-2-with-white-led-flashing-blinking-fast/
It appears that this is due to firmware corruption and you can fix it by using the micro USB cable and hooking it to iTunes. I have not tried it yet but supposedly several people were able to resolve their problem this way. If you do try it, let me know. I don't have the cable at this time.

I have downloaded an app and it does not work

I downloaded two apps. They are both are the same application, on;y difference is that one is the 2.0 version and the other 3.0 version.
When I downloaded the 2.0 version I thought this was the latest version, but turns out there was another newer version. But I tried the 2.0 version first and this does not work on my mac. The application is Wondershare Data Recovery. It is not able to see any devices on my mac.
So tried the 3.0 version and again same problem, does not work, funny because after careful researching on what product to buy I decided to download the trial version and it works fine. Only thing is that I need to but the full version to successfully retrive my disappeared images from memeory card, from my camera phone.
anyway the point is, I have just wasted £95, and I would like this back, or at least the problem resolved. Any help would be appreciated.
Thanks
C

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Updated -
I only find the v3.0 in the UK Mac App Store (MAS). But on the developer's website I find two separate apps; Wondershare Data Recovery for Mac, which is v3.0 and Wondershare Data Recovery for iTunes, which is v2. Where did you buy Data Recovery for iTunes? I don't find it sold in either the MAS or the iTunes App Store.
Have you used the support link to the developer on the apps pane in the MAS? That is who Apple will direct you to contact.
Did you remove the trial version before downloading and installing the paid MAS version(s)?

JDeveloper 11g Using EJB, JPA AND ADF DOES NOT WORK IN VERSION 11.1.1.1.0

Similar Messages

Maybe you are looking for