JDeveloper 12c "Derby Server for WLS Examples Server" prompt

Hello,
I've been playing around with the new JDeveloper 12c, and I've noticed that every time I start up the integrated weblogic 12c server (on Windows), this "Derby Server for WLS Example Server" command prompt opens.
Is there any way to stop this from happening? or is it a required component?
Thanks,
Evan Gilbert

At the moment it's a needed component. There was a discussion if there is a way to disable this, but from what I remember you currently have to have a full DB (for production) or the derby server for the embedded wls to run.
Timo

Similar Messages

Derby Server for WLS

Hi,
When ever i start an OSB server, along with OSB server comingup, why does a "Derby server for WLS example server" starts at port 1527?
This is confusing me....! I havent initiated Derver server, then why does it starts....?
Thanks
Kane
Edited by: 919083 on May 20, 2012 8:25 AM

Hi,
Derby server is used for storing OSB Reports. you can stop it by unselecting evaluation database while deployment of OSB Server.
find following link.
http://osbtutorial.blogspot.sg/
Abhishek

Deployer Installation: Failed to validate Release Management Server for Team Foundation Server 2013

Attempting to install the deployer on a machine and getting the below error. Not sure what that means, out of turn error or what actually occurs at this step, validating release management server, during the configuration piece. The user,
that we set for the service was validated fine. The user is an service account in the TFS RM Server, is an admin on the local box as well.
I am able to get into the TFS RM Server through the client just fine. I can hit the TFS RM UI just fine as well.
Curious what would not allow the deployer to complete as mentioned below.
Any help is appreciated.
I, 2013/12/16, 14:46:26.521, Validated account to use as identity for Release Management Services.
I, 2013/12/16, 14:46:26.521, Validating Release Management Server for Team Foundation Server 2013...
E, 2013/12/16, 14:46:30.905, Received Exception : Microsoft.TeamFoundation.Release.CommonConfiguration.ConfigurationException: Failed to validate Release Management Server for Team Foundation Server 2013.
at Microsoft.TeamFoundation.Release.CommonConfiguration.DeployerConfigurationManager.ValidateServerUrl()
at Microsoft.TeamFoundation.Release.CommonConfiguration.DeployerConfigurationManager.ValidateAndConfigure(DeployerConfigUpdatePack updatePack, DelegateStatusUpdate statusListener)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
I, 2013/12/16, 14:46:30.905, Work completed for GetConfiguration() call : got out of turn error
E, 2013/12/16, 14:46:30.905, Failed to validate Release Management Server for Team Foundation Server 2013.

Hi Kpdn,
Thanks for your post.
All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cold Standby Server for Crystal Reports Server...

Hi there,
We have the confirmation from Hong Kong SAP that Crystal Reports Server 2008 does not come with any clustering feature as Business Objects Enterprise does. We are to set up a cold standby server for the production server for high availability. Below is our procedures to work it out:
1) we set up two machines for CRS 2008 with the same licence key and identical hardware; otherwise we clone the production machine to an identical hardware for a cold standby machine
2) we are using our Oracle instance (same instance for both the production and the standby one) for CRS 2008 repository; we bring the production sever offline and perform the standby server installation of CRS 2008 without resetting the repository Oracle database
3) we are to use a SAN LUN for storing the reports produced by CRS 2008
Once the production server does not work properly due to any hardware problem, we switch it off manually and turn on the standby machine and the Crystal Reports service should resume with no repository problem (all the settings) and no loss of printed reports. We would be grateful if you could confirm the feasibility of these procedures. Thanks a lot.
Regards,
Jason FU

Correct, CRS is for a single machine use only, that why it is not as expensive as the full BOE. Talk to Sales to upgrade.

Authentication problem by external ldap server for WLS 7.0

Hi all,
I have configured iPlanet directory Server to serve as authentication security
provider for WLS 7.0.While doing so I have created a Test security realm and made
it as default.I have also configured the other default settings for the remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false -Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: User weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to boot the server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik

Thanks Vijay - it has worked by creating the Administrator group in LDAP but Weblogic
documentation also states the creation of any group in Ldap server with the boot
username and pwd and then adding the group in the admin role of WLS7.0 - but this
did not work.
If there is any info regarding the same - pl. do let me know
Regards,
Ritwik
"Vijay" <[email protected]> wrote:
>
Ritwik,
I think WebLogic 7 requires a group called "Administrators" in the LDAP
server
and requires an user to be added to that group. I have this working in
one of
my projects. The group really doesnt need to be an LDAP administrative
group.
Can you provide any additional information. I might be able to help since
I got
this working only a coupla days back.
Vijay
"Ritwik Batabyal" <[email protected]> wrote:
Hi all,
I have configured iPlanet directory Server to serve as authentication
security
provider for WLS 7.0.While doing so I have created a Test security realm
and made
it as default.I have also configured the other default settings forthe
remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups
with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false
-Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading
configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security
initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364><Server
fail
ed during initialization. Exception:java.lang.SecurityException: User
weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to bootthe
server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik

Best practice on mailbox database size & we need how many server for deployment exchange server 2013

Dear all,
We have an server that runs Microsoft exchange server 2007 with the following specification:
4 servers: Hub&CAS1 & Hub&CAS2 & Mailbox1 & Mailbox2
Operating System : Microsoft Windows Server 2003 R2 Enterprise x64
6 mailbox databases
1500 Mailboxes
We need to upgrade our exchange server from 2007 to 2013 to fulfill the following requirment:
I want to upgrade the exchange server 2007 to exchange server 2013 and implement the following details:
1500 mailboxes
10GB or 15GB mailbox quota for each user
How many
servers and databases are
required for this migration<ins cite="mailto:Mohammad%20Ashouri" datetime="2014-05-18T22:41"></ins>?
Number of the servers:
Number of the databases:
Size of each database:
Many thanks.

You will also need to check server role requirement in exchange 2013. Please go through this link to calculate the server role requirement : http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
2TB is recommended maximum database size for Exchange 2013 databases.
Here is the complete checklist to upgrade from exchange 2007 to 2013 : http://technet.microsoft.com/en-us/library/ff805032%28v=exchg.150%29.aspx
Meanwhile, to reduce the risks and time consumed during the completion of migration process, you can have a look at this proficient application(http://www.exchangemigrationtool.com/) that would also be
a good approach for 1500 users. It will help you to ensure the data security during the migration between exchange 2007 and 2013.

How to combine multiple columns into one column and delete value the row (NULL) in sql server for my example ?

My Example :
Before:
Columns
name
address
               jon                      DFG
               has                     NULL
               adil                     DER
After:
Column
                               Total
                  name : jon , address : DFG
                  name : has
                  name : adil , address : DER

Why not doing such reports on the client site?
create table #t (name varchar(10),address varchar(20))
insert into #t values ('jon','dfg'),('has',null),('adil','der')
select n,case when right(n,1)=':' then replace(n,'address:','') else n end
from
select concat('name:',name, ' address:',address ) n from #t
) as der
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

BPEL - Starting Server for HelloWorld example

Hey guys, I'm having problems getting the servers to show up in the screen below as per the instructions.
After selecting a server, the SOA Server screen is blank, no selectable servers to choose from. Any help would be appreciated.
Thanks in advance.

For soa server to show up u need to hava RCU installed that would crreate the soa infra schemas that are needed for soa server
have a look at this
http://download.oracle.com/docs/cd/E21764_01/install.1111/e14318/qisoa.htm
Abhinav
Edited by: Abhinav on Nov 3, 2011 11:15 AM

News Server for OS X Server?

Not sure where else to post this: Is there a net newserver that is generally used for serving from OSXS?
I know news has fallen greatly since we used to have to edit our .newsrc files by hand using vi but I just noticed it's not even on the default software list from Apple and a quick site search turned up nothing.
Is News really finally dead?
=Tod
G5/2.0x2, Dual XServes x2, XRAID, beige G3 501Mhz

I had the ISP's tech in today with proper network analysis software to see what's going on.
We discovered that it is not SLP that is causing problems as one tech had suggested. Anytime that the internet access was disconnected from the network, the access to services on the OS X Servers go down or are extremely slow. So we began to look at the DNS entries and realized if we removed DNS then the servers refused access, if DNS entries were made (using OpenDNS), then the servers work.
For example, we use the mail server component of OS X Server 10.4 for our email services. We cannot access the internal server (via IP) without the XServe having an entry in DNS. Put in OpenDNS servers, and things work like they should. The same scenario applies to any services (FTP, NewsEdit, etc.) that's on the OS X Servers. I guess what I'm not understanding is why does everything work internally as long as the OS X Servers have something listed for DNS - even though the DNS is an external DNS IP? Because it is external outside of the network, it's not like the mail server or clients are resolving the private IPs (which there's nothing to resolve since use IP numbers for connection purposes).

Where can I find a APNS Push Server for Windows (not Server)?

I can't use my Mac box as a server. I don't have access to ASP.net Windows Server, so the C# products don't help me. Can I run a Push server straight from a regular Windows box?
Thanks.

Anything here for you http://www.jabber.org/network/oldnetwork.shtml
Tony

Please Help: Setup up a e-mail Server for Windows 2012 Server Essentials ??

I am currently working on a PHP site and could use some help with ideas and suggestions to solve my problem. The website that I am working on is a Members Only Site, so when a user initially signs up, the server should automatically send an e-mail confirming the user so that he/she can finish being registered. I have never set up an email server before and would very much appreciate some help. Should I install a third party app to send emails for the server, or is there a way to have my server send the e-mails? I have tried looking at videos on Youtube, but they tend to be for more experienced individuals and less for NOOBS..Please HELP!!
This topic first appeared in the Spiceworks Community

Thanks for reply Simon.
I havent been able to find a guide so I have been guessing trying to setup the email server. Basically ive tried to setup a user email [email protected] (syncuser is also the account I use to sync my calendar and contacts)
I have turned on the mail server, made a new account on my Mac in mail:
Description: OS X Server
Email Address: [email protected]
Full Name: syncuser
Incoming Mail Server: myserver.local
User Name: syncuser
In the user account I have added the email address.
Im guesing I have to make the mail account somewhere in the server settings but I cant find anything. If turn off SSL in the mail settings I at least get a response from the server:
Unable to Connect
There may be a problem with the mail server or network. Verify the settings for account “OS X Server” or try again.
The server returned the error: The connection to the server “myserver.local” on port 143 failed (error 49: Can't assign requested address)

How do handle RAC server for reboot linux server

Hi Experts,
We user Oracle 10.2.0.4 database at ASM with 4 nodes as RAC in redhat linux 5.
When I got a notice from sys person. The linux server will shutdown for rreboot.
our RAC works well. What do I need to do to match linux server reboot?
stop RAC? stop database? stop servers? ot individual instance? all instance?
Do we have some procedure to following for server reboot?
I am looking for your help!
JIm

ideally the affected instance should be shut down gracefully
using
srvctl stop instance -d <database> -i <instance> -o immediate
You can find this in your documentation.
Oracle will automatically reconfigure itself and this will also happen if the sys person just pulls the plug.
Sybrand Bakker
Senior Oracle DBA

JDeveloper 12c & Standalone WLS w/ADF Runtime 12.1.2

My question is related to setting up WLS with ADF...
Has anyone tried setting up WLS 12.1.2 with ADF Runtime 12.1.2? I cannot seem to successfully deploy a simple ADF 12c app against the new standalone WLS container.
First, I installed WLS 12.1.2 (no coherence) followed by ADF Runtime 12.1.2.
When creating a new domain, I setup the domain with default option (nothing checked-EM,JRF,etc..)
Upon deploying a simple app with a page, I receive the following error:
[02:32:43 PM] [Deployer:149193]Operation "deploy" on application "ADF12cTest" has failed on "AdminServer".
[02:32:43 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ADF12cTest on AdminServer.: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].
[02:32:43 PM] weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false]
[02:32:43 PM] Deployment cancelled.
[02:32:43 PM] ---- Deployment incomplete ----.
[02:32:43 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
However, if I check off EM,JRF. I am asked to create a DB connection!
http://i.imgur.com/fPPaw7t.jpg
I am not interested in using Coherence at the moment, is there an option to just setup a standalone WLS 12c server with ADF 12.1.2 runtime?
Also, does the "Coherence" option imply that ADF Runtime will be included in the domain libs?

Shay, that was the doc I was following, seems like I might have to go another direction now that Brian has confirmed the additional JRF requirements associated with wls 12c. I'm not going to start using technology which I do not understand or have a need yet...so paddling backwards with some wishful thinking, I attempted to run the ADF 12c infrastructure installer against a wls 10.3.6 setup, which results in:
http://i.imgur.com/u3dv5Km.jpg
That pretty much dashes my hopes for an easy install...so moving on.
JDev/ADF 12c is certified for wls 10.3.5+, are there any documentation on how to upgrade ADF Runtime 11.1.2 on WLS 10.3.6 to ADF 12c (perhaps via OPatch)?

Best driver available for MicroSoft SQL server?

Hi,
I am using MS-SQL server for my application server.
Which driver should i use for it?
Right now I am using ODBC driver.
Please suggest me a few links where i could get the best driver(thin driver) for SQL server.
regards
suri

Hi,
best driver available for MicroSoft SQL server?i-net software has written a solid JDBC driver based on TDS. The trial version is limited to a single connection. http://www.inetsoftware.de/English/Produkte/JDBC_Overview/ms.htm
jTurbo provides jdbc driver for MS SQL Server (www.jTurbo.com).
Merant technologies also provides jdbc driver for MS SQL Server. Find more details at http://www.microsoft.com/sql/downloads/2000/jdbc.asp.Microsoft licenses MERANT's JDBC driver for SQL Server 2000.
I cannot comment which one is the best driver. It depends on your project requirements and the buget alloted.
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Sysytems
http://www.sun.com/developers/support/

Ide.user.dir in Jdeveloper 12c

Hi Gurus,
I am just installing Jdeveloper 12c 64 bit for windows. There is another Jdeveloper 10.1.3.3.0 already in placed which i want to keep for EBS R12 OAF extendsion development.
Jdeveloper 10.1.3.3.0 was installed in D:\JDEV\1213\jdevhome\jdev and environment variable JDEV_USER_HOME is set to D:\JDEV\1213\jdevhome\jdev
Jdeveloper 12c was installed in D:\oracle\Middleware\Oracle_Home\jdeveloper
I created new environment variable JDEV_USER_DIR and set it to D:\JDEV_121200_win64\jdevhome\jdev, but notice some different behavior for ide.user.dir entry after Jdeveloper launched.
Scenario 1: Launch Jdeveloper 12c with command : jdev.exe -J-Dide.user.dir=D:\JDEV_121200_win64\jdevhome\jdev
                   In Help->About->Properties, value of :
                   ide.user.dir = D:\JDEV_121200_win64\jdevhome\jdev
                   ide.pref.dir = D:\JDEV_121200_win64\jdevhome\jdev
                   Systemxxx folder created in D:\JDEV_121200_win64\jdevhome\jdev\system12.1.2.0.40.66.68
Scenario 2: Add ide.user.dir entry = D:\JDEV_121200_win64\jdevhome\jdev in jdev.boot
                   Launch Jdeveloper 12c
                   In Help->About->Properties, value of :
                   ide.user.dir = D:JDEV_121200_win64jdevhomejdev
                   ide.pref.dir = D:JDEV_121200_win64jdevhomejdev
                   JDEV_121200_win64jdevhomejdev folder created in D:\oracle\Middleware\Oracle_Home\jdeveloper\jdev\bin
Question : Why ide.user.dir and ide.pref.dir entry are not created with "\" ? Why JDEV_121200_win64jdevhomejdev folder is created whereby i wanted to be in
                  D:\JDEV_121200_win64\jdevhome\jdev?
Scenario 3: Launch Jdeveloper 10.1.3.3.0
                   In Help->About->Properties, value of :
                   ide.user.dir = D:JDEV_121200_win64\jdevhome\jdev
Question: How to keep the ide.user.dir for this version remain to point to D:\JDEV\1213\jdevbin instead of D:JDEV_121200_win64\jdevhome\jdev?
                 Is there any impact when i leave it to point to D:JDEV_121200_win64\jdevhome\jdev?
Regards,
Fendy

I change ide.user.dir in both files and it works.

JDeveloper 12c "Derby Server for WLS Examples Server" prompt

Similar Messages

Maybe you are looking for