JDeveloper 12c too slow do edit BPM Process

Dear forum members,
I have installed the quickstart SOA/BPM 12c bundle and I am using Process Composer and JDev to develop a customer's POC.
The problem is, when I download my BPM project from PAM in JDEV, it is really slow do edit it. From moving a task in the model to using data association.
I imported a project without relation to the repository and it wasn't so slow. I also have disabled auto build on save, which actually improved the performance a bit.
Has anybody experienced that?
Regards.

I solved the problem by installing the 18964763 patch from Oracle Support.

Similar Messages

DVCPRO HD 3 stream multiclip - computer too slow, offline edit? How?

Of all my woes trying to get this project edited, I finally figured out solutions for a few problems I was having (preventing me from starting the edit). Now, let's assume I have everything ready...
I have 3 angles, all DVCPRO HD. When I multiclip and place in timeline, keep getting dropped frames on playback.
I've tried reducing RT as low as quarter framerate and low playback quality but I still get mixed results.
Is there a way I can do an offline edit using multiclips then online the footage once my cuts are complete? How?
Thanks!
Oh duh - 17" Intel iMac (1st gen of Intels) 1.83Ghz, 2GB RAM, 1TB GRAID2, FCP 6.0.2

FANTASTIC.
Great, quick article.
Let's give it a try...
AAHHHH! It works! Ha!
Ok (and I know you read a thousand threads every day), as noted in another post of mine, I have the nightmare of transcoding other footage taken from different cameras (at different resolutions and different compression [both hdv, one is 720p ftg, other is 1080i])
The DVCPRO HD is native 59.94
When I recompress for offline, I get the warning dialog about framerate of preset to be used mismatching footage I've selected. The new project/sequence will be set to OfflineRT HD (Photo JPEG) 29.97 The media I'm about to recompress, again, is 59.94 The offline clips retain the 59.94 framerate.
Edit into sequence, prompt to change sequence settings to match clip settings. I edited the clip and 3 stream (!!) multiclip into the offline sequence with the sequence set to 29.97 or 59.94 I see no noticeable difference in the look of the footage. I don't have an external monitor to test with but I imagine it wouldn't make a difference.
So what's my point? Oh, uhh, yeah. So the other two "footages"...Before I begin the edit, what should they be transcoded to? My guess:
-Transcode HDV footage to DVCPRO HD 720p60 in Compressor
-Results in 59.94
-Put the entire "online" media into master project
-Offline all footage for realtime project
-Edit offline in 59.94 timeline
-Did I mention the purpose of transcoding to match DVCPRO HD is so I can multiclip?
-Complete edit in offline project
-Online it.
A few notes...
-I don't have HDV to test w...oops, wait, I do. And, how convenient, it's 1080i! Nonetheless, I just did the Compress routine with some SD footage, looked like hairy sh...you know. But hey, that's what you'd expect. Mainly, you can see atrocious field separation especially on motion. Either way...
Just converted the 1080i ftg to DVCPRO HD and from master to transcode, they look very similar. There is a SLIGHT blur on the transcoded ftg but it will suffice (it'll have to)
-I offlined the transcoded 1080i-720p, looks like garbage but who cares? It's visible and plays back RT! Errr...when it's on its own in the timeline. Multiclip'd this ftg with 2 other DVCPRO HD offlined and, once in timeline, multiclip isn't playing back at all. Canvas shows the video, viewer doesn't. Each time playhead is stopped, viewer updates with current frames of each multiclip element. Yes, sync is set to open.
Also, canvas doesn't update when cut to alternate angle, continues showing the previous footage AND IT DOES register the cuts but canvas doesn't update. UGH.
-Restarting FCP. That didn't do it. The RT popup also doesn't give an option for multiclip playback. So...ahhh sugar. Found it.
-The sequence needed to be set to 29.97, not 59.94
-Now the question is, how will this affect the online? What will I online back to? Huuuuuhhhhh.....
Well, I did it anyway and set it all back how it was, the sequence framerate is 29.97 - Nothing looks off or weird after a render. HOWEVER...
-Does this mean I am doing it right?? Should the online be 59.94?
OK, I think I've babbled enough. Very close!!! Much closer than before, very helpful, thank you!

Application response too slow- How to resolve (webLogic)

Hi All, Can you please let me know what are all the main areas that i need to concentrate in the weblogic application server if i get the complaint from the clients saying "application performance is too slow".
Edited by: user11361691 on Apr 21, 2010 12:18 AM

you need to check the following:
1: Check the server log files to find any errors at the time when the Client is complaining about the server performance.
2: You can enable the GC logs in the server log and can check whether the there is any issues with the memory usage of the server. From the GC logs you can that whether the time has been taken to to the GC and hence you can try allocating higher memory or you can try changing the GC algorithm according to the analysis.
For details refer the following link:
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/perform/topten.html
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/perform/JVMTuning.html
3: Finally you can collect the thread dumps snap shots and can see whether there are any stuck threads or deadlock situation in the server at the time of slow performance.

[SOLVED] mplayer says that the system is too slow?

I've noticed that mplayer has been complaining that my system is too slow to play videos lately.
mplayer CLI output:
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [XVID] 640x352 12bpp 25.000 fps 1537.8 kbps (187.7 kbyte/s)
Clip info:
Software: Nandub v1.0rc2
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 640 x 352 (preferred colorspace: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.82:1 - prescaling to correct movie aspect.
[swscaler @ 0x89d5f50]SwScaler: using unscaled yuv420p -> bgr24 special converter
VO: [gl2] 640x352 => 640x352 BGR 24-bit
[gl2] You have OpenGL >= 1.2 capable drivers, GOOD (16bpp and BGR is ok!)
[gl2] antialiasing off
[gl2] bilinear linear
A: 866.0 V: 866.0 A-V: 0.012 ct: 0.099 21651/21651 2% 3% 0.2% 4 0
A: 868.6 V: 867.9 A-V: 0.763 ct: 0.099 21698/21698 2% 3% 0.2% 50 0
**** Your system is too SLOW to play this! ****
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
mediainfo output:
Format : AVI
Format/Info : Audio Video Interleave
File size : 698 MiB
Duration : 58mn 0s
Overall bit rate : 1 684 Kbps
Writing application : Nandub v1.0rc2
Writing library : Nandub build 1852/release
Video
Format : MPEG-4 Visual
Format profile : Streaming Video@L1
Format settings, BVOP : Yes
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 58mn 0s
Bit rate : 1 538 Kbps
Width : 640 pixels
Height : 352 pixels
Display aspect ratio : 16/9
Frame rate : 25.000 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.273
Stream size : 638 MiB (91%)
Writing library : XviD 1.1.2 (UTC 2006-11-01)
Audio
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Codec ID : 55
Codec ID/Hint : MP3
Duration : 58mn 0s
Bit rate mode : Variable
Bit rate : 133 Kbps
Nominal bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Resolution : 16 bits
Stream size : 55.1 MiB (8%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.60 video frame)
Interleave, preload duration : 477 ms
Writing library : LAME3.90.
Encoding settings : ABR
~/.mplayer/config contents:
vo=gl2
monitoraspect=16:9
Any ideas?
EDIT: Well, it looks like adding "ao=alsa" to ~/.mplayer/config did it. I guess that it uses OSS by default, which is apparently too slow.
EDIT 2: If anyone else can offer any mplayer performance tips, I'd still appreciate them.
Last edited by mrbug (2008-10-24 00:42:05)

Perhaps. Also, in that error message, do as it says and play around with combinations of those.
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
(Taken directly from your post )

Disk too slow messages

I keep on getting this message Disk too slow not able to process all data on time every 5 to 10 seconds

Hello rsmani
Check out the articles below for some troubleshooting steps for the error message that you are seeing.
Logic 9.1.4 or later: Core Audio System Overload messages
http://support.apple.com/kb/TS3834
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/HT1314
Thanks for using Apple Support Communities.
Regards,
-Norm G.

SQL Developer 2.1 working too slow

Hi All,
I am working on SQL Developer 2.1 after 3 years previously I used version 1.2. Comparatively so many changes came in 2.1 version but it is too slow and while debugging variable values not shows in Tooltip we need to depend on Smartdata tab. If any settings or patches available for following problem than please provide me.
1. Too slow
2. Variable values in Tooltip
By
Srinivas M. P.

SQL Developer using 127232 KB, Free 1.32 GB
Is there any setting is SQL Developer or you talking about my system memory.
If you talking about my system memory than I am using 2 GB RAM in my system and system working well
If I do anything in TOAD than TOAD is working fine but SQL Developer working too slow.
Edited by: SrinivasMP on Feb 5, 2010 3:34 PM

Oracle BPM Composer and other Apps Too Slow

Dear Forum Members,
I made a installation of Oracle BPM/SOA Suite in a Development VM with 5GB RAM.
The web applications such as BPM Composer, EM, Weblogic Console are too slow. They take too much time to load.
I am using the JRockit JVM and Centos 6.
Regards.

Bump up your memory to 8gb and then look at your xmx setting in your startWeblogic.sh and ensure it's 3072m or more.

InContext Editing Too Slow

Hi Folks,
Love the concept of InContext editing but I don't think it actually works!
I am only working on a simply HTML page with one other user. It takes forever to do anything.
clicking the edit page button: 23 seconds
clicking the done button: 56 seconds
Clicking the publish button: 25 seconds then clicked ok and it took another 47 seconds.
This is the 3rd client I have tried this product on. Each time we have found it a great solution until we try to actually work with it. It's just way too slow so we stop using it.
I tried the Adobe demo pagehttp://incontextediting.adobe.com/demo/includes/ice/ide.html#page=news.html. It's supper fast no issues at all.
Is there some trick to setting it up that I don't know about?
I spent an hour in total this morning with tech support. 25 minutes on hold, then I spent more time actually going through license numbers then talking about my problem. They just told me that Adobe does not support InContext Editing. I was told to go to the support portal and put in a ticket. I went there, the support portal doesn't list InContext Editing in the list of support issues. What gives?
Thanks for any help you can provide
Sylvia

Hi Tom,
Here is the page http://webviewdesigns.com/haiti_earthquake_relief/includes/ice/ide.html#page=haiti_news_ja ckie.html
I'm using Safari (MAC PRO) and my client is using Firefox (Windows XP)
I've had the same issue before with client's on other browsers and desktops, servers configs.
The page is a news page for a Haiti relief site mini site. It's is inside my work site which is pretty big, could that be an issue?
I've attached it for you to look at.
Thanks
Sylvia

Call a BPEL/BPM process when ever a process model is edited through BPM Publisher

Hi All,
We have a requirement to trigger a BPEL/BPM process if a Process Model is edited through Process Publisher or if a process model is published through Process Architect.
Could you please let us know if there is anyway to achive it.
Thanks
Rajesh.

The above issue is seen when we don't have proper FP patchset. after applying a patchset all issues sloved

After ios7 update my iphone is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing fans like me y they spoil his name ??

after ios7 update my iphone 4 is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing apple have unique and unique fans like me why they spoil their name like this update iam too disappointed iam not say for oppose apple iam say for feedback to grow apple in world because i love apple more please solve it
by real customers
iPhone 4, iOS 7, iam apple suporter

please help me after ios7 update my phone is tooo slowww i want my old iphone

BPM : too many alerts in a process step - how to remove older alerts ?

Hello
One question about Business Process Monitoring :
We have too much alerts in a process step, so it takes 20 minutes to display them.
How can we reduce the number of alerts in this process step ?
Thanks in advance.
Regards
Fred

It worked !!
Thanks John for your valuable inputs.

Based on my computer what I/O buffer size and process buffer should I have to stop getting the system too slow error message?

I need some sugestions on my settings. I have a 13 in macbook pro runnig 10.8.2 with a 2.7 Ghz i7 with 4 GB of ram.
I am using Logic pro X 10.0.3 and when I get to a really load heavy section of a project then I get a too slow error message.
I know this will happen from time to time because of my computer but is there anyway to make it better?

Im curious how you are running LPX on an OS X 10.8.2 system?
As to your question.. there is no specific answer... Try playing with the settings (making a note of your current ones) and see what improvements, if any, are made under different combinations of the settings.
Personally I'd add more RAM if you can... as that alone may help matters by some degree...
Finally,
This article may also help.. (Its written for LP9 but most of it is applicable for LPX too)
http://support.apple.com/kb/TA24535

BPM Process does not show newly added task

I added a new task to my current BPM Process which has several tasks already built into it and they work when deployed. When I execute the workflow and get to that step, I get the following message: Details not available for this task. I am using jDeveloper 11.1.1.5. I created my page with ADF. I can see the pages for all the rest of the tasks in my process but not this newly added step. I have checked the source for this task against other tasks in the process and it looks the same. Does anyone have an idea what I might need to change or add in order to make this work?
Edited by: user10279592 on Jan 13, 2012 7:20 AM

If you're getting the Server 500 error and it is not an initiator task, what are you seeing at the bottom of your log file?
If you're getting the Server 500 error and it's an initiator task, then there is a trick to figuring out the real problem (close the dialog -> refresh the worklist -> select the work item at the bottom of the list). The initiator activity makes it necessary to do this additional step to see what the issue is.
Hope this helps,
Dan

Disk is too slow (Record)(-10004) error..so sick of this.

Hello all,
I can no longer record more than three tracks in logic without getting the error message "Disk is too slow (Record)(-10004)". When this happens, recording is stopped.
At first I suspected my drive was faulty, maybe slowing down. So being in the middle of a session that took me 2 hours to set up, I called for a break and rushed off and bought an external Seagate 7200rpm firewire 800 drive. I installed it and set it as the recording path for the project. There was no change, the same error occured.
I then switched the target drive to another internal one I use for Time Machine - same problem occured.
It seems to me that this problem has nothing to do with my drives. I am at a loss to explain it. I have looked for hours online for a solution but while many have experienced this there seem to be few answers out there.
Unless I find a solution this will be my last project with Logic. I tried and tried for the last 5 years to use this program but things like this keep happening. It's glitchy with UAD cards, Duende, RME interfaces, Midi controllers, Hard Drives, RAM and external clocks. I've had problems with them all over the years. I will most likely switch to Cubase which I feel is inferior for editing and loops, but at least it seems to be stable.
If anyone has any insight I'll try and fix it, but I just can't keep shelling out money for a program that just doesn't work.

I am experiencing a similar problem & have been receiving the same messages, even while recording as little as one track and playback has become an issue as well. However, THIS WAS NOT ALWAYS THE CASE. I have heard of people with this same problem, where they receive this message out of nowhere after logic has been working perfectly for them.
I also would like to note that I am running all settings in logic for optimized recording and playback (audio & buffer settings etc etc etc)
THIS IS NOT A HARDWARE ISSUE, at least in my situation as I am running a fast internal HD & have ample memory. Please reach out if you feel like you have a pragmatic solution to this issue.
This may be a possible lead on the fix... I remember reading this post from a user "soundsgood" in 2008 who was having a similar issue..I don't understand completely his solution, but if someone could enlighten me, I feel that this might be the solution to our issue
+"Okay - forgive me 'cause I'm a newbie on this forum and if somebody else has already figgered this out, I'm sorry.... I've been having the same problem all of the sudden after many years of crash-free and error-free recording. I've read everything. I've pulled my hair out. I've done dozens of clean installs. I've repaired permissions so many times I can do it blindfolded. And sitting here tonight, it dawned on me.... there are TWO places Logic is sucking data from: wherever you've got your SONG files stashed, of course.... but it ALSO NEEDS TO ACCESS THE STARTUP DRIVE (or wherever else you might have your Apple Loops installed). I was watching my drives being accessed during a playback of a fairly complicated tune (most tracks were frozen of course), and both of the afore-mentioned drives were going berserck with accesses. We're all focusing on our dedicated audio drives, but forgetting about our boot drives (where Logic usually resides along with most or all of our loops). I carbon copy cloned my boot / operating system (including Logic) to a different (in my case, an external firewire) drive and the problem disappeared. Could've been because the cloning process de-fragged all the loops & stuff, or maybe my OS just likes snatching its sample/loop info from an external drive. Worked for me... so far....... let me know if it works for others....."+

How to change a BPM Process ID

well i've got this issue, i'm using JDeveloper 11.1.1.6 and in my BPM project i created a bpm process but i forgot to change the ID, now my process have the name "Pulling" but the ID is "Process" and i don't know how to change it. this's not a real problem but when i'm using OracleBAM to create a dashboard, the graphic take the ID to identify the process and that is confusing so i need to rename the ID process
anyone knows about that?
i would appreciate any answer
thanks a lot for reading

You have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPd on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

JDeveloper 12c too slow do edit BPM Process

Similar Messages

Maybe you are looking for