Jdeveloper 2.0-FATAL ERROR DURING COMPILING APPLET

Can anyone help me about this error during the compilation of a
applet?
"Fatal error:cannot access class
borland.jbcl.util.DispatchableEvent;no source found;must be
compiled;because supefclass java.utilEventObject of class
borland.jbcl.util.DispatchableEvent has changed"...
1) how can i compile it?
2) where can i find the source?
another question..
some compilation warning say me" there are some deprecatio
warnig--consulting documentation for better alternative..
Where are this documentation?
Thanks
null

Official reply from Oracle via CS:
"MacOSx 10.6.5 with Java 1.6.0_22 is not supported for JDeveloper version 11.1.1.2 and later. This has not been certified yet."

Similar Messages

Installing JDeveloper on OSX : Fatal Error (during string substitutions)

Following the instructions from: http://download.oracle.com/docs/cd/E12839_01/install.1111/e13666/ojdig.htm#BDCFFEJC
and read about all the post in this forum, I am still not able to install JDeveloper 11.1.1.3 or 11.1.1.2
MacOSX 10.6.5 with Java 1.6.0_22
I did the steps as mentioned in the installation guide (make sure 64-bit is on top of the list in the java preferences tool + made the link)
The installer has no problems finding java, but displays a "Fatal Error etc..." at 52%: the action going on then is "Performing String Substitutions"
The log file looks as follows:
2010-11-23 22:08:12,639 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.client.modules" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,676 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.client.modules.L10N" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,678 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,679 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.L10N" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,681 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.extra" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,681 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.saml2.modules" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,682 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.coherence.integration" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,683 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.toplinkgrid" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,684 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.quickstart" feature-version="10.3.2.0"/>
2010-11-23 22:08:12,685 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.common-plugin" feature-version="2.5.0.0"/>
2010-11-23 22:08:12,686 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.common-plugin.launch" feature-version="2.5.0.0"/>
2010-11-23 22:08:12,687 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.common-plugin.L10N" feature-version="2.5.0.0"/>
2010-11-23 22:08:12,688 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config-security" feature-version="1.0.0.0"/>
2010-11-23 22:08:12,689 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config" feature-version="7.0.0.0"/>
2010-11-23 22:08:12,690 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config.launch" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,690 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config.L10N" feature-version="7.0.0.0"/>
2010-11-23 22:08:12,693 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.pubsub" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,716 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.sca" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,718 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.dotnet" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,720 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.xquery" feature-version="10.3.3.0"/>
2010-11-23 22:08:12,722 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.gpr" feature-version="3.0.1.0"/>
2010-11-23 22:08:12,723 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.uninstall" feature-version="6.2.0.0"/>
2010-11-23 22:08:12,723 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.uninstall.launch" feature-version="6.0.0.0"/>
2010-11-23 22:08:12,724 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.uninstall.L10N" feature-version="6.2.0.0"/>
2010-11-23 22:08:12,726 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.patch-client" feature-version="3.2.1.0"/>
2010-11-23 22:08:12,726 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.patch-client.L10N" feature-version="3.2.0.0"/>
2010-11-23 22:08:12,728 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.ocm" feature-version="1.0.0.0"/>
2010-11-23 22:08:12,729 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.paf" feature-version="1.1.0.0"/>
2010-11-23 22:08:12,729 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.clone" feature-version="1.1.0.0"/>
2010-11-23 22:08:13,005 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.client.modules" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,005 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.client.modules.L10N" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,007 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,008 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.L10N" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,009 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.extra" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,010 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.saml2.modules" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,011 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.coherence.integration" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,011 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.toplinkgrid" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,015 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.quickstart" feature-version="10.3.2.0"/>
2010-11-23 22:08:13,015 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.common-plugin" feature-version="2.5.0.0"/>
2010-11-23 22:08:13,017 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.common-plugin.launch" feature-version="2.5.0.0"/>
2010-11-23 22:08:13,017 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.common-plugin.L10N" feature-version="2.5.0.0"/>
2010-11-23 22:08:13,039 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config-security" feature-version="1.0.0.0"/>
2010-11-23 22:08:13,040 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config" feature-version="7.0.0.0"/>
2010-11-23 22:08:13,040 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config.launch" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,041 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.cie.config.L10N" feature-version="7.0.0.0"/>
2010-11-23 22:08:13,046 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.pubsub" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,047 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.sca" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,048 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.dotnet" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,050 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.xquery" feature-version="10.3.3.0"/>
2010-11-23 22:08:13,052 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.gpr" feature-version="3.0.1.0"/>
2010-11-23 22:08:13,052 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.uninstall" feature-version="6.2.0.0"/>
2010-11-23 22:08:13,053 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.uninstall.launch" feature-version="6.0.0.0"/>
2010-11-23 22:08:13,054 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.uninstall.L10N" feature-version="6.2.0.0"/>
2010-11-23 22:08:13,055 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.patch-client" feature-version="3.2.1.0"/>
2010-11-23 22:08:13,066 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.patch-client.L10N" feature-version="3.2.0.0"/>
2010-11-23 22:08:13,067 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.oracle.ocm" feature-version="1.0.0.0"/>
2010-11-23 22:08:13,068 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.paf" feature-version="1.1.0.0"/>
2010-11-23 22:08:13,069 WARN [getArchivesFromTree] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="com.bea.cie.clone" feature-version="1.1.0.0"/>
2010-11-23 22:08:13,139 WARN [readCachedArchiveInfo] com.bea.plateng.wizard.installer.silent.tasks.ReadCachedArchiveInfoTask - Unable to read archive.bea from /var/folders/gQ/gQeTMB+nFpaLMIYi6zkEp++++TI/-Tmp-/
2010-11-23 22:08:54,427 WARN [WizardController] com.bea.plateng.wizard.installer.gui.tasks.InstallSelectionSummaryTask - No JVMTargets selected for installation
2010-11-23 22:09:17,095 WARN [Thread-5] com.bea.cie.gpr.internal.feature.FeatureCatalogImpl - Unable to locate feature corresponding to feature reference: <xml-fragment feature="weblogic.server.modules.pubsub" feature-version="10.3.3.0"/>
2010-11-23 22:11:06,516 ERROR [stringSubst_gui] com.bea.plateng.wizard.WizardController - Uncaught Exception
java.lang.IllegalArgumentException: http://java.sun.com/xml/jaxp/properties/schemaLanguage
     at org.apache.xerces.jaxp.DocumentBuilderFactoryImpl.setAttribute(DocumentBuilderFactoryImpl.java:118)
     at com.bea.plateng.common.util.StringsubsEngine.isValid(StringsubsEngine.java:1043)
     at com.bea.plateng.wizard.installer.helpers.StringsubsHelper.execute(StringsubsHelper.java:143)
     at com.bea.plateng.wizard.installer.helpers.StringsubsHelper.execute(StringsubsHelper.java:85)
     at com.bea.plateng.wizard.installer.helpers.StringsubsHelper.execute(StringsubsHelper.java:73)
     at com.bea.plateng.wizard.installer.gui.tasks.ProgressStringSubstTask.execute(ProgressStringSubstTask.java:150)
     at com.bea.plateng.wizard.gui.tasks.AbstractGUITask.run(AbstractGUITask.java:42)
     at java.lang.Thread.run(Thread.java:680)
2010-11-23 22:12:01,325 WARN [WizardController] com.bea.plateng.wizard.installer.cleanup.tasks.CleanupShortcutsTask - No shortcuts to cleanup??
2010-11-23 22:12:01,326 WARN [WizardController] com.bea.plateng.wizard.installer.cleanup.tasks.CleanupWinRegistryTask - No winregs to cleanup??
Thanks in advance for some hints ...

Official reply from Oracle via CS:
"MacOSx 10.6.5 with Java 1.6.0_22 is not supported for JDeveloper version 11.1.1.2 and later. This has not been certified yet."

W500 not starting - HELP - unable to locate BIOS ROM; Fatal error during GPU init

hi gurus,
Following problem:
when i start W500 (ubuntu) it stays with the black screen, not even displaying initial ThinkPad message, where you might press the ThinkVantage blue button, to go to BIOS. It just stays black and does nothing.
Than I press Power button for a few seconds to shut it down and try again. Still black screen.
The same procedure again and again and sometimes W500 boots up, sometimes wants to go to recovery mode, sometimes not.
Sometimes, after the black screen it displays the message:
Invalid ROM contents
ERROR Unable to locate BIOS ROM
Fatal error during GPU init
Anyone had the same problems?
What are the possible checks i might execute, to check up W500?
cheers
lenowiow

Update: I have now tried compiling vbios.bin and int10.bin directly into the kernel. No success.

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Fatal error during installation of Live Office XI 3.1

Hello everyone,
Im getting Fatal Error during the installation of BOBJ Live Office XI 3.1. The full description: "The installation ended prematurely because of an error." This error occurs immediately after popup with Installer Information.
Maybe it happens because of my system: Windows 7 64 bit, MS Office 2010.
Do you have any advice how can I install it?
Thank you and best regards,
Sofija

Hi,
you should check the PAR but I'm pretty sure it doesn't run on Windows 7 nor on MS 2010.
Rgds,
Massimo

Cisco SG300 HOSTP_flash_operation: fatal error during read operation!

I have 2 Cisco SG300-52P switches. Earlier this week, one of them started dropping connections and POE was not working on a couple of devices... I came in this morning to restart them when no one else was around. After restarting them, the troublesome one was still not detecting POE devices.
I have been waiting for some down time to do a firmware update, so I thought this might straighten things out. I Downloaded the updated bootloader and firmware from Cisco's site. Updating the (non-problem) SG300 went exactly as it should. Upgrading the the bootloader on the problem SG300 went exactly as it should. Started the firmware update on the problem switch ....... and it didn't come back online. The power light was flashing, and occasionally the lights on ports would blink like they were trying to reset, but they never made it. There weren't really any special configurations on this switch so I had nothing to lose by trying a factory reset via the pinhole on the front ...... same result.
I connected to the serial port via a win7 PC with putty. .. All setting per Cisco. I got a message that the connection was detected, but it would not accept keyboard input. I power cycled the SG300 and watched the messages go by ... It looked like everything was working. I even got a message that the "Initialization task was completed"..
Then this message "HOSTP_flash_operation: fatal error during read operation!"
We have had a couple of internet and power outages recently, but I am trying to rule out other issues before blaming it on that.
any suggestions?
putty output file attached

I am not familiar with SG series products, but looking at the error message in the attached file, it appears there is an issue with reading from the flash. It could be that the flash file is corrupted and the flash needs to be formatted and then reload the software again.
If you have support contract on the product, I would suggest you open a TAC ticket with Cisco and have them help you.
HTH

Fatal error during installation - Error 1603 ONLY on XP

My Dears,
while installing any CS3 or CS4 Adobe product for my friend, at ~90% of installation error comes up:
"Adobe Photoshop CS4
Error:
Error 1603. Fatal error during installation."
I am struggling to solve it for 3 days now, and of corse I have seen and tryied all things proposed in posts like this: http://forums.adobe.com/thread/373577 , but still nothing helps me.
Thats list of all things that I have tryied to do:
- CleanUp fix
- Uninstalling all Adobe before fix
- Turning Internet off fix
- Turning anti-vir things off fix
- Registery fix
- Starting from CLEAN new system fix
- Changing language from US to International fix
Still nothing. Probably thats the point of problem:
Current Situation:
Got ACER ASPIRE x3200 desktop width Windows Vista (preinstalled), did clean installation of Windows XP and dumped Vista
There is no official drivers for XP, but got cracked chipset driver and official nVidia 8200 driver for XP from Internet
Got all Service Packs
100% legal
If nothing is working, maybe thats becaouse of my PC?! Installed it on my laptop with Vista 32b - WORKS (it means that installation CD is not corruptet or something). But then I have tryied to install it on another laptop with XP PRO - fail as with my PC. It seems that Windows XP Pro is not good for CS3 or CS4, BUT it did months before in my old unbranded PC.
Help! I really want to install that stuff.
Best Regards,
Westmidlander

I was only speaking very generally... This is all common sense...
Adobe and other software makers are moving on from XP in their development. Thus XP becomes more and more troublesome to use as the likelihood of problems increases.
In the case of installation, a lot of very specific things are required of an installer so that it can work on Windows 7. The User Account Control (UAC) system and other security measures such as file permissions have to be completely and properly satisfied to install software on the newer systems. Indeed, the application itself even has to work differently to be compliant - reference the recent 12.0.2 issues with loading scanner drivers for example, or the fact that Photoshop needs to put some things under C:\Users\... now that always used to be put under C:\Program Files\Adobe\...
It's not hard to imagine that Adobe isn't testing software as thoroughly on XP as they once did either. Perhaps they missed one of the quirks of XP in pursuit of getting it to install properly on Windows 7.
You're putting a new cutting edge software application on an operating system designed nearly 10 years ago (an epoch in high tech). That you don't see even more problems is a testament to Adobe's committment to support XP.
-Noel

HP Deskjet and Officejet Full Feature Software and Drivers - Fatal error during installation

The "HP Print and Scan Doctor" reports software install problem on the scanner text.
In 2008 I bought an HP Pavilion Elite with Vista with a HP OfficeJet 5610 All-In-One connected through USB. About a year ago I upgraded to Windows 7 and print and scan worked OK. Last week I received an e-mail from HP for HP Print and Scan Doctor (ver 4.3) and installed it. I have had a problem trying to install the software updates that it said that I need. I have uninstall and reinstalled many times.
The HP Print and Scan Doctor said that the printing works but the scanner part fails at Registery, HP Scan Flow Manager, and Front Panel Test.
Any help would be appreacited.
The HP Print and Scan Doctor reports:
A later version of software is available for this product.
I used the install file: AIO_CDB_NonNet_Full_Win_WW_130_141.EXE.
It usually gets:
Sample Error log file:
This question was solved.
View Solution.

Hello NotHome,
Welcome to the HP Forums!
I understand you're receiving a "Fatal Error" during the installation. I will do my best to assist you! I would start off by following this HP document on Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
Please post your results, as I will be looking forward to hearing from you.
Have a great night.
I worked on behalf of HP.

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Visual C++ Fatal error during installation

When I was installing Titanfall on Origin I got a 1603 error. I looked at some forum posts on fixes.
I have uninstalled all of my VC++ from my computer and when i tried to download and install fresh copies every single one results in a fatal error durring installation.
OS Version = 5.1.2600, Platform 2, Service Pack 2
OS Description = WinXP - x64 Professional Service Pack 2
CommandLine = c:\9606a8ce2f11654507209809fa5c4d\Setup.exe
TimeZone = Mountain Standard Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft Visual C++ 2010 x64 Redistributable Setup
Package Version = 10.0.30319
User Experience Data Collection Policy: UserControlled
Number of applicable items: 3
Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:00:13).

The error log is incorrect. I am using Windows 7 Pro.
I was able to install MS VC++ 2013 redist.(x64) and VC++ 2005 (x64) just fine but I cannot install 2010.
Eh? Never saw an install log where Win 7 was identified as Win XP x64.
What, exactly, are you trying to install? Are you installing Visual Studio, or C++ redistributables?
Please show the link to what you are trying to install, and provide your install logs as follows:
Please collect your install logs with this:
http://aka.ms/vscollect
After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like OneDrive, and post the link here.

0x80070643 Fatal Error During Installation of PLEX Media Server Setup

Hi,
I had gotten a rather pesky virus and was finally able to flush it out thanks to Malware Bytes. However, now nothing will install.
Currently, I'm trying to install Plex Media Server, and I get the "0x80070643 Fatal Error During Install".
What can I do to undo this damage and get things to download smoothly again?
Just in case, here's a log of the last Plex install attempt:
[0184:1960][2014-04-10T13:10:58]i001: Burn v3.7.1224.0, Windows v6.1 (Build 7601: Service Pack 1), path: C:\Users\Michelle\Desktop\Downloads\Plex-Media-Server-0.9.907.429-f80a8d6-en-US.exe, cmdline: ''
[0184:1960][2014-04-10T13:10:58]i000: Initializing string variable 'InstallFolder' to value '[ProgramFilesFolder]Plex\Plex Media Server'
[0184:1960][2014-04-10T13:10:58]i000: Initializing string variable 'LaunchTarget' to value '[InstallFolder]\Plex Media Server.exe'
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058.log'
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleOriginalSource' to value 'C:\Users\Michelle\Desktop\Downloads\Plex-Media-Server-0.9.907.429-f80a8d6-en-US.exe'
[0184:1960][2014-04-10T13:10:58]i052: Condition '((VersionNT >= v5.1) AND (ServicePackLevel >= 3)) OR ((VersionNT >= v5.2) AND (ServicePackLevel >= 2)) OR (VersionNT >= v6.0)' evaluates to true.
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleName' to value 'Plex Media Server'
[0184:1960][2014-04-10T13:10:58]i100: Detect begin, 1 packages
[0184:1960][2014-04-10T13:10:58]i101: Detected package: pms, state: Absent, cached: None
[0184:1960][2014-04-10T13:10:58]i199: Detect complete, result: 0x0
[0184:1960][2014-04-10T13:11:02]i200: Plan begin, 1 packages, action: Install
[0184:1960][2014-04-10T13:11:02]i000: Setting string variable 'WixBundleRollbackLog_pms' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058_0_pms_rollback.log'
[0184:1960][2014-04-10T13:11:02]i000: Setting string variable 'WixBundleLog_pms' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058_0_pms.log'
[0184:1960][2014-04-10T13:11:02]i201: Planned package: pms, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: Yes, uncache: No, dependency: Register
[0184:1960][2014-04-10T13:11:02]i299: Plan complete, result: 0x0
[0184:1960][2014-04-10T13:11:02]i300: Apply begin
[17F4:1200][2014-04-10T13:11:08]i360: Creating a system restore point.
[17F4:1200][2014-04-10T13:11:29]i361: Created a system restore point.
[17F4:1200][2014-04-10T13:11:29]i000: Caching bundle from: 'C:\Users\Michelle\AppData\Local\Temp\{e9921c42-812d-4b39-9c02-612724349e82}\.be\pms.exe' to: 'C:\ProgramData\Package Cache\{e9921c42-812d-4b39-9c02-612724349e82}\pms.exe'
[17F4:1200][2014-04-10T13:11:30]i320: Registering bundle dependency provider: {e9921c42-812d-4b39-9c02-612724349e82}, version: 0.9.907.0
[17F4:1618][2014-04-10T13:11:32]i305: Verified acquired payload: pms at path: C:\ProgramData\Package Cache\.unverified\pms, moving to: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\pms.msi.
[17F4:1200][2014-04-10T13:11:32]i323: Registering package dependency provider: {69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}, version: 0.9.907, package: pms
[17F4:1200][2014-04-10T13:11:32]i301: Applying execute package: pms, action: Install, path: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\pms.msi, arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7" INSTALLLOCATION="C:\Program
Files (x86)\Plex\Plex Media Server"'
[17F4:1200][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to install MSI package.
[17F4:1200][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to execute MSI package.
[0184:1960][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[0184:1960][2014-04-10T13:13:26]i319: Applied execute package: pms, result: 0x80070643, restart: None
[0184:1960][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to execute MSI package.
[17F4:1200][2014-04-10T13:13:26]i318: Skipped rollback of package: pms, action: Uninstall, already: Absent
[0184:1960][2014-04-10T13:13:26]i319: Applied rollback package: pms, result: 0x0, restart: None
[17F4:1200][2014-04-10T13:13:26]i329: Removed package dependency provider: {69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}, package: pms
[17F4:1200][2014-04-10T13:13:26]i351: Removing cached package: pms, from path: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\
[17F4:1200][2014-04-10T13:13:26]i330: Removed bundle dependency provider: {e9921c42-812d-4b39-9c02-612724349e82}
[17F4:1200][2014-04-10T13:13:26]i352: Removing cached bundle: {e9921c42-812d-4b39-9c02-612724349e82}, from path: C:\ProgramData\Package Cache\{e9921c42-812d-4b39-9c02-612724349e82}\
[0184:1960][2014-04-10T13:13:26]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No

Hi,
Make sure you have turned on Windows Firewall:
1. Click the Start button. In the search box, type Windows Firewall, and then, in the list of results, click
Windows Firewall.
2. In the navigation pane, click Turn Windows Firewall on or off.
3. For each group of settings shown, select Turn on Windows Firewall, and then click
OK.
After that, download and install again. If the issue still persists, try to run
sfc /scannow command to repair the system for test:
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833
Karen Hu
TechNet Community Support

Itunes 7.6 installation Fatal Error during installation

I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

Itunes: Fatal Error During Installation

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted and when I tried to open up iTunes(after restarting), a little window came up saying:
+Preparing to install...+
Then after a minute or two it said: +Please wait while Windows configures iTunes+
Then another window pops up saying:
+*Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. *+
+*Verify that you have access to that directory.*+
and I have no idea what that means so i closed it then a pop up shows saying: +Fatal Error During Installation.+
WHAT DO I DO?!?!? please help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

Try first going through this article to remove iTunes and Quicktime completely (http://docs.info.apple.com/article.html?artnum=93698).
After you remove everything, don't re-install yet. Download the Windows Installer Cleanup Utility (http://support.microsoft.com/kb/290301). After insalling that, remove any references of iTunes, Apple, or Quicktime in the list.
Try re-installing now.

Jdeveloper 2.0-FATAL ERROR DURING COMPILING APPLET

Similar Messages

Maybe you are looking for