Jdeveloper 2.0 product version... when exactly?
Please, when exactly Jdeveloper 2.0 Product version will be
available in france. Have you an accurate Date?
null
Please, when exactly Jdeveloper 2.0 Product version will be
available in france. Have you an accurate Date?
null
Similar Messages
-
Patching - How to update the console product version when installing Update Rollup 5
Hi,
I just completed a patch to upgrade Service Manager to Update Rollup 5. I updated the data warehouse servers and management servers.
When looking at installed programs in Windows it shows that Service Manager has the latest version 7.5.3079.315:
However, when I look in the About Service Manager option in the console it shows a product version of 7.5.3079.0:
How do I update the console product version so that it shows the 7.5.3079.315 version?Hi,
This behaviour is expected. Unfortunately, Microsoft does not update the About Info screen of the SCSM console. Add remove programs shows version .315, which means the console was also updated.
Make sure to also update consoles that your users are running on their computers.
BR,
Dieter -
Costing variant and production version
We have two costing variants "C" (used to create current cost estimates) and "F" (Used to create Future cost estimate). All of the production versions in the system have a validity date of 9999. Is there a way to tell the system to use one production version when costing using Variant C and another version when costing is done using variant F.
Or if that is not possibel than how do we use one production version in 2011 while recosting current standards and another production version in 2012. (Remember the production version that we are using currently in 2011 has a validity date of 9999)
RegardsHi
In your Costing Variant - You have a tab callled "Qty Structure Control".... Here you can specify BOM Determination and Routing Selection id.... i.e. If the BOM / Routing attached to the prod version can be assigned a specific BOM Determination Class and Routing Selection id, it can work
OR ELSE
While doing CK11N, you can manually specify the Prod Version in the "Qty Struct" Tab..... Create an LSMW for CK11N and you can do a mass costing like CK40N.... CK40N does not have this option of specifying Prod Version
I would prefer 2nd option
Br, Ajay M -
Hi friends
when i have created production version for one material i got the error. pleas efind the error below.
inconsistencies for production version.
when i checked the production version for that material systm shows the green light for bom and red light for routing. but system shows bom exists and task list exists. onle problem is inconsistencies for production version.
please help me any missing from my side
Thanks
venkatHi
1. Check the valid from date for Routing and the Valid from date that you entered in the production version ( MM02/ MRP4 VIEW ) is same
The vaild from date should be same for Routing and the PV valid from date (Mentioned in PV BASIC DATA)
Suppose the valid start date of the Routing is later than tha Date that you given in the production version basic date, then the inconsistence error will come . it give the red light to Routing
ie.
Routing valid from date : 06..06.2009
PV vaild from date : 01.06.2009
So for the date 01.06.2009 - 05.06.2009 , ysytem say that no Routing exist.inconsistence in pv. -
Production Version at item catagory "L" PO
Hi,
Can i select the production version at Purhcase order lelve for item catagory L- Subcontracting Purchase order.
We can do it at Info record level , but is it possible to do at PO level? if yes then How?
Thanks,
Samir BhattHi Samir,
Follow these steps to get your required Production version when you create PO
We assume two different vendor with different BOM for Material "X"
1.Create BOM with alternative 01 and 02 for material "X",
2.Add those BOM in production version in material master MRP4 view for material "X".
3.Create Info records with Production version (Step 2 material master) in Purchasing Organisation View for each vendor.
4.Create Source list for material "X"
5.Now go to ME21n enter the required vendor and material "X", it will automatically default your required production version.
Hope these steps will help you,
Cheers!!!
Gopi. -
Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.
And what exactly is your problem? Other than going of on a tangent about Adobe's alleged evilness preventing you to activate whatever CS3 product, you have not provided any useful info such as what exact problem you have, what system, what product we are axctualyl talking about and so on.
Mylenium -
Receiver Determination when multiple Product Versions / identical namespace
Hi,
How would the receiver determination be done when we have multiple product versions with identical namespaces and interface names ?
During development, when we do a release transfer to another product version, the namespaces and interface names remain same as the current objects.
How would XI resolve the correct interface in this case ?
thanks,
ManishThe XI does not care about the application systems. When a message is received by the application, it knows, what to do with the messages.
The receiver could be an RFC call, an IDOC, an Abap Proxy, here the correlation between interface and Abap code is unique.
The receiver could be a File, or JMS adapter, here the correlation between interface and communication channel is unique as well.
You might reuse IDOCs or RFCs or in rare situations other interfaces in different software components and install them for the same application system. But you can only generate proxies from one interface.
Regards
Stefan -
JDeveloper 11g production version error
Hi,
Finally , the production version of JDev 11g is available , but when i made my 1st sample hr app i found this error on the browser
Unexpected exception caught: java.sql.SQLDataException, msg=ORA-01882: timezone region not found
ORA-01882: timezone region not found
Unexpected exception caught: java.lang.NullPointerException, msg=null
help me plz , how could i solve this problem ?!!
thanx 4 help in advance :-)Hi all.
Wich I put to 0 ??
This are all my registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation entries.
and all have values.
ActiveTimeBias
Bias
DayLightBias
DayLightName
DayLightStart
StandardBias
StandardName
StandardStart -
How do enter my product code into a trial version when I have a student copy of Adobe Photoshop CS6
How do enter my product code into a trial version when I have a student copy of Adobe Photoshop CS6
Redemption Code Help
Installing and Activating a Try & Buy product
Mylenium -
When will JHeadstart 10.1.3 production version is going to be available?
Hello
Could anyone tell me when will JHeadstart 10.1.3 production version is going to be available?
is multiple selection in LOV availabe with 10.1.3 preview?
thanks,
SanJHeadstart 10.1.3 production is available now, see announcement in separate thread. This release does not contain multi-select LOV's yet.
kind regards,
Sandra Muller
JHeadstart Team
Oracle Consulting -
PPM not getting created when ECC Production version is changed
Hi,
We are facing a problem with PPMs.
We changed the Production version in ECC for the corresponding Material in ECC from 5000 to 6000.
We then ran the RSPPMCHG and then generated and activated the PPM Integration Model.
No queues inbound (APO) or Outbound (APO) were blocked. \
The result was that the 5000 PPM was deactivated in APO but we could not find the 6000 PPM version anywhere.
Can anyone please help??
Regards
Abhishek SahiHi,
Refer notes 448085 PPM Transfer: Tips and Tricks
Aslo after generating and Activating the IM, run the report RSPPMCHG ( Tcode - CFP3)
Thanks,
nandha
Edited by: S.Nandakumar on Oct 8, 2010 10:05 AM -
Project "Installer Build Product version" vs exe version
Hi,
Can someone help me understand why the "Installer Build" in a project has a "product version", which later shows up in the Windows add/remove programs?
I must be missing something because to me it seems very strange that what they call "product version" in the installer is not automatically linked to the compiled exe version that the installer is built for?
Now I have to try and remember to manually keep these two versions synchronized, and the build 'product version' doesn't even have the same number of fields as the exe version information?!
It's strange when my program splash screen shows "V1.2.0.8" (read by the app by inspecting its own exe) but in the windows add/remove programs, it could say something totally different, such as 1.0.6...
Why is it like this?? How do other people use/handle these various version numbers? -is there a way for my app exe to find what the installed "product version" is?
---Confused...
-QFang
QFang
CLD LabVIEW 7.1 to 2013QFang wrote:
I suppose it helps explain.. Perhaps I just need to think differently about how to name our installers.. Divorce the installer name from the (main) application name, then the difference in version numbers wouldn't be confusing.
Ideally the NI builder would be flexible enough that you could have a "Company Name" as the "installer name" and you could add/remove/maintain the whole company's product list with that same installer, similar to the NI installer.. sounds like a lot of work though.
Thanks for replying!
It does sound like a ton of work! I have to belive it is feasable with TKs like VIPM and Deploy on the market. (A few others I am less familliar with come to mind as well) Niether is exactly what you seem to want but demo that the tech is there!
Jeff -
New Jdevelopper Production version
Hi,
When last preview became a production version ?
Do you have resolve problem of physically delete java file, when a file is removed from a Project ?
Regards
PhilippeIn 10.1.3 the way JDeveloper manages the project content has changed.
Details about the new (and improved) way are in this document:
http://www.oracle.com/technology/products/jdev/101/collateral/101/migratingjdeveloperprojectsto1013.pdf
The way to eliminate files from showing up in your project in the developer preview is with the working set feature.
In production we'll make it easier with a button that does this automtaically for you. -
Creation of inspection lot 04 depending on production version
Hi Experts,
could you tell me if it is possible to create a Good Receipt inspection (lot origin 04) depending on the production version used ?
My material has 2 production versions:
0001 - production with process order
0002 - production with repetitve manufacturing
When I do a GR on process order, I do not want to create an inspection lot 04.
When I do a GR on product cost collector, I want to create an inspection lot 04.
As I have entered inspection types in material master data, I do not know how to do the distinction ?
Thanks in advance for your help
Best regards
AmauryHi
Check user exit
QBCK0003 |Extended QM check for goods receipt
Regards
Sujit -
ISSUE:regarding production version tab of MRP4 of data transfer using BD10
Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA
Maybe you are looking for
-
T-Code for report generating Open Special GL Items
Dear Experts, i wish to know a procedure or T-Code which would list Special GL Items of Vendors, which yet to get clear with Vendor Invoices and are still lying as Open Items in the Special GL. i have researched thru T-Code S_ALR_87012082 and it disp
-
How to generate MT100 file in XML ?
How to generate MT100 file in XML ? Dear All, Base: We are working on ECC 6.0 version and developing B2B with bank. Requirement: For B2B bank requires payment orders in MT100 format wrapped in XML. At Present: I am using PMW format MT100
-
Lenovo... why did you "DownGrade" the ThinkPads?
Dear Sirs, this is a complain and I hope someone will read it in order to make Lenovo ThinkPad's product line become the top choice again. I'm a ThinkPad user since... the '90. As a result I know the product and I use it daily. I've purchased a new T
-
Problem connecting ipod with dvd
Hi. I have an ipod nano. Before installing software version 1.2 I could connect it with my dvd via usb and manage it as a external disk, but after installing ipod software version 1.2 my dvd does not recognize ipod when I connect it via usb. I also h
-
I am about to buy the above products for home and a laptop I bought the high res laptop for editing photos and the photos look great on the display but I cannot use photo shop and lightroom has any body had this problem and is there a simple fix that