JDeveloper 9i 9.0.3 on Windows XP Professional

Hi!
I try to run JDeveloper 9i 9.0.3 on Windowss XP. Basically it works, but hangs very often (escpecialy with wizards). I already tryed to disable my antivirus (Norton) as I experienced some problems with Java- aplications and virus scanners in the past, but it doesn't change anything!
Does anybody know any issue to this problem?
Regards
L. Weller

Similar Messages

Jdeveloper 11g cannot be installed on Windows with Thai regional settings

I have no idea where to properly submit this issue. Hope I do not abuse this forum for too much.
Jdeveloper 11g cannot be installed on Windows with Thai regional settings configuration.
I've got "A fatal error has occurred. This application will terminate" error dialog, while installing.
I have to change my regional settings to English then install it and change my setting back later.
Regards

Sigh... This forum software doesn't even support image posting.
The error is every easy to reproduce.
1. On Windows XP, goto "Control Panel" -> "Regional and Language Options" -> "Standards and format"; and change that to "Thai"
2. Invoke "jdevstudio11110install.exe"
3. Always click "Next" until the error dialog appear.
<pre>
. Exit [x] .
. [!] A fatal error has occurred. This application will .
. terminate. .
. [[ OK ]] .
</pre>
From my experience, this always have something to do with the Buddhist Era year system (AD + 543).
Regards.

RE: X1 Carbon windows 7 Professional 64bit error message

Hi, Good Morning Everybody, I wish somebody here would advise me of my problem, Thanks.
Problem of Laptop
=================
[Message 01]
Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.
[Message 03]
hi, head of customer service,
below is a chat log i had online for your review. My concern is that
everybody work for a living - if u r the specialist in this field, i
respect that u can foresee what is going to happen if u tell somebody who
is not a specialist to do a specialist's job. U should be able to provide
advice n the possible outcome if things do not work out right, because it
is the end user who needs to face it n live with it. Take for example, if
the office building was on fire n the human instinct is to fight fire
first. But the workers do not have the proper knowledge of fire n also
not equipped with good PPE. This worker probably called the fire
department to report a fire, n at the same time the fire department
specialist at the other end of the line told that worker to
"troubleshoot" the fire without giving him the possible outcome if the
fire blown out of scale, what price this worker will have to pay.
My questions are:
a) what is the goal of having on-line chat service? Is it to resolve
simple technical issues, that's why an average IT worker can do the job?
b) if the end user already knew the problem he is facing and he is
expecting the best advice/solution from an expert rather than from an
average IT worker, would it be better for the end user to go straight to
email? Or straight to the service center?
c) Is there a team work spirit between your chat section and service
center? Is it going to take a long time to communicate among themselves
when they face the same problem real time - meaning they can't talk to
each other over the phone to resolve the same problem which the end user
is facing? If they can discuss over the phone, and possibly the service
center also share the same steps to resolve the problem but could not be
sure if something goes wrong, the os of the laptop need to be
re-installed. Then, the end user would not have to do a double job - to
chat online and go down to the service center only find out that it is
the same answer. Would it be better for the chat person to do the double
job internally for the end user?
[Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more than 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.]
[Message 02]
[GoToAssist (10:11:53):
Connecting...
GoToAssist:
Dear Customer,
Thank you for contacting Lenovo and showing your interest in Lenovo
instant support program. I see you have a question on your product. I am
going to take few moments to review the information of your product and
message you back, right here, very soon. Please add this page to your
favorites, in case you get disconnected or close your browser, so you may
come back to this conversation.
Saraswati (10:12:25):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (10:12:30):
Hello Simon.
Saraswati (10:12:35):
Good Morning.
Saraswati (10:14:47):
Simon , Have you checked with the steps I have provided in the earlier
session ?
SIMON (10:14:55):
hi, i just lost the session chatting with u. Can u show me all that again
here?
Saraswati (10:16:14):
Sure , Let me paste the conversation in this session.
Saraswati (10:17:26):
Saraswati (06:54:46):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (06:54:59):
Hello Simon.
Saraswati (06:55:05):
Good morning.
Saraswati (06:55:35):
Please be connected to the session while I check with the query.
Saraswati (06:59:38):
It appears we may have been disconnected. Please respond so that I can
confirm our connection.
SIMON (07:00:27):
Hi, yes I can see u r writing....
Saraswati (07:00:58):
May I know the operating system installed? Windows Xp, Windows Vista,
Windows 7 or Windows 8? Is it 32-bit or 64-bit?
SIMON (07:02:20):
it's windows 7 64bit, the laptop is i5-3rd gen with 4gb ram
Saraswati (07:03:36):
http://www.intel.com/support/graphics/sb/cs-003927.htm please click on
the link to fix the issue.
Saraswati (07:05:49):
Let me help you with the latest graphics driver
Saraswati (07:08:14):
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1d625ww.exe
Intel HD Graphics Driver for Windows 7 (64-bit)
Saraswati (07:08:25):
Please install this link.
Saraswati (07:09:01):
Before installing uninstall the same form the device manager under the
display adapter option.
SIMON (07:10:21):
hi, the link u recommended mentioned something like reinstall graphics
drivers. I don't have the drivers n think it's pre-installed inside X1
Carbon. My concern is what is the worst case it could be if I execute the
link file n something goes wrong?
Saraswati (07:12:28):
Simaon , I would like to inform you that it is only the driver
reinstallation. It will hamper the system performance. It is the driver
provided with the preloaded OS. Hence it should not cause any issue.
SIMON (07:12:48):
btw, the os is windows 7 professional, hope i get it right.
Saraswati (07:13:09):
However please check by uninstalling and reinstalling the Microsoft
Visual C++ .
Saraswati (07:13:31):
Yes , I have provided the link for the Windows 7 OS 64 bit.
Saraswati (07:13:58):
Please check with the above steps. This should fix the issue.
Saraswati (07:16:32):
Please feel free to get back to us at any moment , we will resolve all
the issues related to the Lenovo Machine.
Saraswati (07:17:32):
It is been my pleasure assisting you with the issue.
SIMON (07:18:06):
ok, i take some time to do this, how to get back to u? do i need to
re-boot the laptop during the process? Please don't tell me i need to
re-install the os again if everything fail, because there r some
3rd-party software which i do not have the original serial
Saraswati (07:19:18):
Please reinstall the drivers from the driver link. Then restart the
machine and check if the issue persists.
Saraswati (07:19:57):
If still the issue persists then reinstall the Microsoft Visual C++.
Saraswati (07:20:12):
Hope this information is helpful
Saraswati (07:20:27):
Thank you for choosing Lenovo's chat Support. Kindly note, that there
will be a customer satisfaction survey once you close this chat session.
Please provide your valuable feedback for the chat session with me on a
rating scale between 0 to 10, where 9 to 10 being satisfied with the
service provided.
Saraswati (07:20:33):
Please note that the survey is only for current interaction. If you have
any comments or feedback, please mention same under customer comments.
Our team will take actions based on these comments to help us to serve
you better. Thanks for your understanding & Support.
Saraswati (07:20:44):
Thank you again for contacting Lenovo and have a great day Simon.
Saraswati (07:22:00):
You may close this chat session now.
SIMON (07:22:06):
hi, have any of your specialist face with this problem before?
Saraswati (07:23:22):
We donot remember , but we would have assisted in the similar manner.
Please check with the steps.
Saraswati (07:23:45):
Thank you for choosing Lenovo and have a great day ahead.
SIMON (07:24:48):
my worry is as i mentioned that i dont have the serials n it will be a
great price to pay for me if i miss some steps or something just not
right, then i would rather leave it as it is.
Saraswati (10:17:51):
Saraswati (07:25:43):
You can visit the nearest service center , so that the service technician
will help you further.
Saraswati (07:26:29):
Please contact on "800 6011 343 (Local number only) +603 8315 6856
(DID)"-- singapore
Saraswati (07:27:03):
Contact on the above numbers the concerned team will provide you the
address of the service center.
SIMON (07:27:55):
do u think the technician is more capable than any on-line chat engineers
because they can see the real problem of the laptop?
Saraswati (07:28:54):
The steps I have provided should fix the issue. If you need any further
assistance please visit the service center.
SIMON (07:30:37):
if they r just feedback to me with the possibilities i already perceived,
then it's not worth the trip for me to take time off work n travel
2 hours to n 2 hours fro your repair center.
SIMON (07:33:51):
My question is that "is it very difficult to comm between u and the
service technician side, then feedback to me online? so i dont have take
time off work n i also have to face my boss n it will look bad on me.
Please be more considerate?
Saraswati (07:36:02):
Simon , I understand your concern. Please check with the steps I have
provided and get back to us if the issue is not fixed. if you are
doubtful that the above steps might delete any of your files then you can
visit the service center , so that the service technician will check with
the issue personally.
Saraswati (07:36:47):
Thank you for choosing Lenovo and have a great day ahead Simon.
Saraswati (10:23:17):
Is there anything else that I can assist you with, at this moment ?
SIMON (10:23:26):
ok, I will take your advice n talk to some IT guys b4 i act on it, to be
sure that i made an informed decision. if i really have doubts, then i
would have to suffer in silence n just live with that error message for
the time being.
Saraswati (10:23:53):
Alright.
Saraswati (10:24:23):
Thank you for contacting Lenovo and have a great day Simon.
Saraswati (10:25:09):
You may close this chat session now.]
Regards, Simon.

Dev environment - i mean Visual Studio
But fist try to check in Event viewer if there's any error message that could help to find what the actual problem is.
Regards
Bartek

Can I install Oracle 8.1.7 Enterprise Edition on Windows 2000 Professional

Sorry if this is a stupid question, but I have Windows 2000 professional edition loaded on my PC and I'm not sure what it allows. Can I load Oracle 8.1.7 Enterprise Edition of the database on this operating system, or do I need to load windows 2000 server software.
Thanks
Ryan

Its a problem with oracle and pentium 4 processors actually. The solution involves renaming or deleting the symcjit.dll in the 8i installation package after you've copied the whole Cd onto your HDD!
I've tried this and it install OK, with a few errors along the way, now I can't get the apache server working, nor on the 9i AS that I've installed as well. Let me know if you get anything useful please?
Michael.
[email protected]

Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
Zurvaan

Yes, of course. Both versions works but you have to be prepared for lots of RAM.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Installation problem - Oracle 11gR2 Windows XP Professional SP 2

Hello everybody!
I have a problem at the installation moment of Oracle 11g R2 on Windows XP Professional Edition with SP 2. Please help me!
This is my computer's hardware configuration:
CPU Intel Pentium 4 3.00 Ghz x86
RAM: 1 GB
Hard disk: SATA 180 GB
Graphic Card: PCI-Express nVidia 7300GS 256 MB
Network connection: LAN / Internet connection: ADSL
O.S. Windows XP Professional Edition SP 2 (and installed .Net framework 2.0)
Antivirus: AVG 9.0 free edition
WEB Browser: Internet Explorer / Mozilla Firefox.
I tried to Install Oracle 11g R2 2 times, so I have formatted my computer 2 times because after the installation process, the Oracle Universal Installer don't respond.
Every time I installed the O.S., drivers, Antivirus, .Net Framework, Ms office, everything works properly.
I configured the network connection to use a fixed IP Address, I created the environment variables ORACLE_BASE, ORACLE_HOME, ORACLE_SID and ORACLE_UNQNAME (1st time its value was the same value of ORACLE_SID, 2nd time its value was the database global name) and then, I start the SETUP program, it run properly, but at the moment of finish the database creation this message appears: execute the commands: 1) define ORACLE_UNQNAME in database unique name 2) emctl.bat start dbconsole.
Through SQL Plus I can connect to the database, execute queries, the listener is working, but the database console service doesn't work. If I try to start it since command prompt (emctl start dbconsole) I get a message about the specific error 2.
What can I do??
Thanks in advance!

Good morning! I hope you are fine.
I appreciate your help.
Jean-Valentin: I opened a DOS box (logged as the Administrator User who installed Oracle), I changed the ORACLE_SID value and the result of the commands:
set ORACLE_SID=MGN
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
was this one:
C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl stop dbconsole
OC4J Configuration issue. C:\Oracle_base\Home_ODB11gR2_Aug1st2010/oc4j/j2ee/OC4J_DBConsole_oraserver11_MGN not found.
Definitively, change the value of ORACLE_SID is not right. Then, I changed the ORACLE_SID again to its original value and the result was:
C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl stop dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The OracleDBConsoleMGN service is not started.
More help is available by typing NET HELPMSG 3521.
C:\Oracle_base\Home_ODB11gR2_Aug1st2010\BIN>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleMGN service is starting...............
The OracleDBConsoleMGN service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Using the ORACLE_SID original name, at least the emctl shows the OracleDBConsoleMGN as not started when I try to stop.
schavali: When I executed the Oracle Installation, the database configuration assistant showed this message:
The Enterprise Manager configuration was success with this warning: Error at start up database control, execute the commands: and you know, here start our history.
And the 3 steps of the database configuration assistant shows this:
Copying database files : Success (correct mark)
Creating and starting up database instance: Success (correct mark)
Finishing database creation: Success (correct mark)
I'll try to check the information of the link: http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/structure.htm#CACBBFGI
and then, I write again.
This cannot be... Oracle always works properly... is powerful... what is going on???
Thanks guys, have a great day!

Installation of Oracle11i on Windows 2000 Professional,Pentium 4

Hi
My system is Pentium4,128MB RAM with Windows 2000 professional OS.i am stuck at the first cd i.e i could not run RapidWiz.cmd.it is coming to the command prompt just leaving
"start .bin\launch.exe .RapidWiz.cl" on the screen with in no time.
does any one have work around for this problem.
Please help me in this regard.
please do mail me to [email protected]
Thanks in advance.
Sreeni.

Hi,
Sorry, this is an old entry aka a bug in the docu. Windows 2000 is not supported possible anymore by CE, (its not tested anymore). Most likely Windows XP without passowrd account also does not work anymore.
Best Regads, Oliver
Composition Environment, CE1, Windows 2000 Windows XP.

Exception_access_violation error on Windows 2000 Professional

Hello,
I am developing a stand-alone Java application that runs without any problem on Windows 98, XP, and most 2000 and NT machines. On some Windows 2000 Professional machines, however, attempting to run the program generates the following error. Is there something about the configuration of these machines that needs to be adjusted to make the program work? The JRE (1.4) and program installation are done in exactly the same way in each case. The only variation seems to be in the version of the operating system.
Any help much appreciated. Best reply gets 4 DD's!
Thanks much,
David
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D1B32AD
Function=[Unknown.]
Library=C:\Documents and Settings\Baker\Desktop\csdemo\Windows\resource\jre\bin\fontmanager.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
     at sun.awt.font.NativeFontWrapper.registerFonts(Native Method)
     - locked <05D8C5E8> (a java.lang.Class)
     at sun.java2d.SunGraphicsEnvironment.addPathFonts(Unknown Source)
     at sun.java2d.SunGraphicsEnvironment.registerFonts(Unknown Source)
     at sun.java2d.SunGraphicsEnvironment.access$000(Unknown Source)
     at sun.java2d.SunGraphicsEnvironment$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.java2d.SunGraphicsEnvironment.loadFonts(Unknown Source)
     - locked <02B1DA00> (a sun.awt.Win32GraphicsEnvironment)
     at sun.java2d.SunGraphicsEnvironment.mapFamilyName(Unknown Source)
     at java.awt.Font.initializeFont(Unknown Source)
     at java.awt.Font.<init>(Unknown Source)
     at sun.awt.windows.WDesktopProperties.setFontProperty(Unknown Source)
     - locked <02B1CCD0> (a sun.awt.windows.WDesktopProperties)
     at sun.awt.windows.WDesktopProperties.getWindowsParameters(Native Method)
     at sun.awt.windows.WDesktopProperties.<init>(Unknown Source)
     at sun.awt.windows.WToolkit.initializeDesktopProperties(Unknown Source)
     at java.awt.Toolkit.getDesktopProperty(Unknown Source)
     - locked <02B04360> (a sun.awt.windows.WToolkit)
     at com.sun.java.swing.plaf.windows.WindowsLookAndFeel$DesktopProperty.<init>(Unknown Source)
     at com.sun.java.swing.plaf.windows.WindowsLookAndFeel.initComponentDefaults(Unknown Source)
     at javax.swing.plaf.basic.BasicLookAndFeel.getDefaults(Unknown Source)
     at javax.swing.UIManager.setLookAndFeel(Unknown Source)
     at javax.swing.UIManager.setLookAndFeel(Unknown Source)
     at ZeroGad.a(Unknown Source)
     - locked <05CCDB68> (a java.lang.Class)
     at ZeroGh.b(Unknown Source)
     at ZeroGh.a(Unknown Source)
     at ZeroGh.a(Unknown Source)
     at com.zerog.ia.installer.Main.a(Unknown Source)
     at com.zerog.ia.installer.Main.main(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.zerog.lax.LAX.launch(Unknown Source)
     at com.zerog.lax.LAX.main(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00455000      C:\Documents and Settings\Baker\Desktop\csdemo\Windows\install.exe
0x77F80000 - 0x77FFB000      C:\WINNT\System32\ntdll.dll
0x77DB0000 - 0x77E0B000      C:\WINNT\system32\ADVAPI32.dll
0x77E80000 - 0x77F31000      C:\WINNT\system32\KERNEL32.DLL
0x77D40000 - 0x77DAD000      C:\WINNT\system32\RPCRT4.DLL
0x77E10000 - 0x77E6F000      C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F79000      C:\WINNT\system32\GDI32.dll
0x77820000 - 0x77827000      C:\WINNT\system32\VERSION.dll
0x759B0000 - 0x759B6000      C:\WINNT\system32\LZ32.DLL
0x75E60000 - 0x75E7A000      C:\WINNT\System32\IMM32.DLL
0x20000000 - 0x20025000      C:\WINNT\System32\shim.dll
0x6D330000 - 0x6D442000      c:\documents and settings\baker\desktop\csdemo\windows\resource\jre\bin\client\jvm.dll
0x77570000 - 0x775A0000      C:\WINNT\System32\WINMM.dll
0x78000000 - 0x78046000      C:\WINNT\system32\MSVCRT.dll
0x681A0000 - 0x681A7000      C:\WINNT\System32\serwvdrv.dll
0x66740000 - 0x66747000      C:\WINNT\System32\umdmxfrm.dll
0x6D1D0000 - 0x6D1D7000      c:\documents and settings\baker\desktop\csdemo\windows\resource\jre\bin\hpi.dll
0x6D300000 - 0x6D30D000      c:\documents and settings\baker\desktop\csdemo\windows\resource\jre\bin\verify.dll
0x6D210000 - 0x6D228000      c:\documents and settings\baker\desktop\csdemo\windows\resource\jre\bin\java.dll
0x6D320000 - 0x6D32D000      c:\documents and settings\baker\desktop\csdemo\windows\resource\jre\bin\zip.dll
0x6D000000 - 0x6D0F6000      C:\Documents and Settings\Baker\Desktop\csdemo\Windows\resource\jre\bin\awt.dll
0x77800000 - 0x7781D000      C:\WINNT\System32\WINSPOOL.DRV
0x77A50000 - 0x77B3A000      C:\WINNT\system32\ole32.dll
0x60000000 - 0x60045000      C:\WINNT\System32\MSCTF.dll
0x6D180000 - 0x6D1D0000      C:\Documents and Settings\Baker\Desktop\csdemo\Windows\resource\jre\bin\fontmanager.dll
0x77920000 - 0x77943000      C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000      C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000      C:\WINNT\System32\PSAPI.DLL
Local Time = Sun Oct 27 04:45:56 2002
Elapsed Time = 3
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.0-b92 mixed mode)

Yes, the user in question is logging on with full Administrator access. He suspects some kind of conflict with another application on the machine, but given that the two occurrences I've seen of this error have been on NT and 2K Pro machines, I'm inclined to think it's operating system related. Any more hunches?

Oracle 8.1.7 Installation Problem on Windows XP Professional

We have P4 Processor with 128MB DDR RAM with 845 Intel Chipset motherboard & windows XP Professional.
We are unable to install Oracle 8.1.7 Server.
Autorun itself is not running.
Can you please give us suggestions.
Very Urgent

You have JIT-compiler problem for Pentium 4.
You can copying the install CD to disk search for files named symcjit.dll and rename them to symcjit.old (or delete) and run the installer from hard disk.

Oracle 8.1.7 installation problem on Window 2000 Professional

Hi everyone, I have a problem of intalling Oracle 8.1.7 on Window 2000 Professional. When I started to install Oracle 8.1.7 when I click install I get this error message
"Jrew has caused error in Javai.dll"
and restart the computer, I restarted again and again and the same problem occured, would you please tell me how I resolve this problem. Thanks in advance.
Mesfin
[email protected]
[email protected]

Intel says there is a bug in oracle's OUI as well other swing based programs. The solution is to copy the CD to local drive and add -nojit as first parameter to JRE_MEMORY_OPTIONS e.g. JRE_MEMORY_OPTIONS="-nojit -mx32m"
This will enable OUI to run. Even after installing oracle Net80 conf. asst won't start due to same reason.
Go to HOME\admin\tools\ and edit netca.cl and netasst.cl to add same -nojit before -classpath.
Do this for every tool that gives this prob such DBA studio...
Ashish

Windows XP professional on K7T266 Pro 2

I just installed Windows XP professional on my computer. Previously I was dual booting Windows 98 and windows 2000 Professional, but I decided to just do one system. The problem is, I can't use the windows update. I get to the point where it says it's scanning for updates, and it just doesn't do anything. It stays at 0%
Does anyone have any ideas. To be honest I was having problems on the Windows 2000 installation as well. Same problem. On the Windows 98 partition, it was fine and worked like a charm. I'm stumped. ANY ideas are welcome. Thanks in advance for your help

ya I have done all that. My internet works fine. It's just the windows update that doesn't work. I can download stuff fine and the system works quite well, I just can't get any service packs or anything.

HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!

Suhail wrote:
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!Which PSC 1400 are you using? There a few different models: HP PSC 1402 All-in-One PrinterHP PSC 1410v All-in-One PrinterHP PSC 1410xi All-in-One PrinterHP PSC 1417 All-in-One PrinterLet me know which one so I can get you the proper download.Thanks,Sean

HT2105 Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

Not a solution yet, but received the following from one of the tech people I've been e-mailing back & forth with.
"I'm sorry that you have been unable to submit your podcast. The podcast submission form is currently offline. When trying to submit the podcast you will receive this message "We are Currently Experienced Technical Difficulties". Once the issue has been resolved, I would be glad to inform you.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available."
Who knows, maybe the problem isn't with my feed after all.

Trying to install SAP Business One 8.8 on a clean Windows 7 professional pc

Hi, i am trying to install SAP Business One V 8.8 on a clean Windows 7 professional laptop. I need to install the server and client sides. I have already installed SQL server express 2005.
When i try to to install the server software I get the error message 1628 installation failed almost straight away. I ket the same message if I try and install the server tools, SBo server or outlook integration.
What am I doing wrong?
Thanks in advance
Simon

Hi Simon,
Solution to Problem ID :1618
Try the following Steps :
1. Clear the 'Temporary' Folder of Windows 7 : Start ->Run->%temp%->Press 'Enter'->Select All & Delete
2. Restart your machine. (This is Must)
Actually it keeps an image of the previous installations, so always for re-installation you need to perform this steps.
Same is with Win 2008 Server editions also.
Now proceed with the installation and remember always run SBO installations in Windows 7 and 2008 Server by clicking on 'Run as Administrator'
Hope your problem would be solved.
Regards,
Saikat Roy

JDeveloper 9i 9.0.3 on Windows XP Professional

Similar Messages

Maybe you are looking for