JDEVELOPER 9i 903 TURNED OUT BLACK, ONLY BUTTONS ON TOP THAT DID NOT WORK.
I am using Windows 2000. One day I opened JDeveloper 9i 903 it was totally gray, no Navigator, no files opened, and when I tried to opened some it did not react.
The problem occured from one day to another. Only thing that had happened(but that had happened before also) was that the local oc4j was killed (not nicely stopped) because it "hanged" because of an error in an web-application(but the web-application worked!)
I have now reinstalled it, and now it is not gray, but when opening a workspace I got the "thinking" cursor, and it does not react on anything.
I thought that the workspace/project was corrupt so I opened JDeveloper again and tried to make a new workspace, I can add a project to it, but I can not add JAVAfiles to the project, and it is inpossible to save the workspace, so then I can not close the Jdeveloper, and I have to kill it!
What can I do?
I have now reinstalled it, and now it is not gray, but when opening a workspace I got the "thinking" cursor, and it does not react on anything.
I thought that the workspace/project was corrupt so I opened JDeveloper again and tried to make a new workspace, I can add a project to it, but I can not add JAVAfiles to the project, and it is inpossible to save the workspace, so then I can not close the Jdeveloper, and I have to kill it!
What can I do? What JDK are you running? Are you using the JDK that was packaged with JDeveloper? When you reinstalled it, did you delete the old version first?
Thanks,
ROb
Similar Messages
-
I can receive e-mails but I can't open them. I tried turning the wi-fi on and off but that did not help. Has anyone had a similar problem?
Try to reset your iPad, pressed the On/Off button and the Homebutton at the same time till you see the Apple logo in the screen.
-
My app store is not working. I followed instructions to hold wake/sleep home button....did not work, I went into settings, general, reset network settings....didn't work...now what?
Did you try to go to Settings > Store, tap on Apple ID, Log out and Login again.
What message do you get when you open the App Store? -
After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.
I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps! -
An app continues to say "installing" when nothing is happening. It has been several hours now. It's only a book so should not take this long. I have tried deleting it and that did not work.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
How may I get my Ipad 2 to power on? I have tried the two button approach and it did not work.
My Ipad 2 will not power on. I have tried the two button approach but it did not work. Until last evening, the Ipad was working very well. After it entered the sleep mode, it would not come back on. What can I do?
The first thing to suspect is a completely drained battery. When this happens the iPad shuts down and will not turn on. Even if you charge the iPad it may take more than 30 minutes before it responds. Plug the iPad into the charger that came with it and plug the charger into a known good wall outlet. Do not charge the iPad by connecting it to a computer. Wait 30 minutes. Then reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until the battery is at 100%. If the iPad does not restart consider making an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Our wifi is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
Cheers, Tom -
Anyone help,
My WiFi stays off, have tried turning off: did not work. tried Restoring settings and that did not work. Downloaded iSO 6.1.3 and it still want work. Any ideas!!same my iphone also did not work i tried to restore but its not coonected to the internet.pls i need your help too.
-
Hi.. My Iphone acts as if it is dead. Tried a lot with Sleep +home buttons as well, but did not worked. When it is plugged in, keeps on charging with a regular beep. Please advise.
Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.
-
How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.
How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.
I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ??? -
My mac has only a windows partition that is not working!!! please help!
Ok this is the story.
While trying to installing windows on a partition of my mac book air I have installed a software that allows mac book air to see a bootable usb like a dvd. It worked perfectly than I pressed the wrong button while installing windows on my windows partition and CREATE EMPTY SPACE where there used to be my mac os lion.
Now when I switch it on what I see is only my windws partition which is not working.
I have no clue on what to do plaese please help!
Thank youhttp://support.apple.com/kb/HT4718
-
my ipod touch is not working , i tried to rest it holding the power button and home for a while but that does not help..
any idea ?Connect the iPod to its syncing computer. Let it charge for 1/2 hour . If iTunes sees the iPod restore it via iTunes
Next see if placing the iPod in recovery mode will make it visible in iTunes so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Also see:
iPod touch: Hardware troubleshooting -
My children deleted my app store on my iphone 4 and now I cant get it back on my phone. any suggestions?
As the App Store is pre-installed on the device, it can't really be removed. I'm thinking the icon is either stashed on another folder, or it's been turned off. If it's in a folder the only way to really find it is to look through all folders on your device for the icon. To check if it's turned off, go to Settings > General > Restrictions (it will ask for a passcode, if your children went into restrictions they created this passcode if it didn't already exist) and make sure "Installing Apps" didn't get turned off (if it's turned off the icon disappears from the Home screens).
Hope this is helpful
-CG -
Sound buttons on top of keyboard not working
For some reason the keys F10, F11, and F12 are no longer working to increase, decrease or mute the volume. I just got the computer, and it was working fine a little while ago. I think I may have messed with something and now I don't know what I did. Does anyone know how to reactive these buttons?
Additionally how do I check to see if the F7,8,and 9 buttons are working to pause, play, rewind and fast-forward?
Any advice is greatly appreciated! Thank you so much!Hi,
Do you hear any sound at all atm? It could be that your macbook thinks you want to use the digital audio output. This is the case if there is a red light emerging from your audio out hole. If you want to fix this you can try to insert a wooden toothpick and try to push the switchback that detects if there are external boxes plugged in. Or take the save way and take it to the apple store.
kind regards,
Aijse
Message was edited by: Aijse
Maybe you are looking for
-
How to upgrade First Generation Touch to use Remote for Apple TV
Hello and thanks in advance. Can anyone tell me how to upgrade the OS for a 1st Generation iPod Touch so that it can use the Remote App from I tunes to control the Apple TV device. It needs to be the 3.1.2 version, but Apple seems to offer only 3.1
-
How do I get the iPhone Apple Store to recognize my new Apple ID email?
I changed my email and notified Apple. My mail on my iMac works fine and my email on the phone is fine. However when I go to update apps in the Apple Store app on my iPhone4 it asks for a password but has my old email address above the spot for typin
-
Replacing old hard drive with a new one. HP ENVY DV7 7230us laptop
I am trying to replace my old hard drive with a new one. For some reason it won't do it. I want to perform a clean install with the recovery disks. It seems the only way I can do this is to clone the old one with the new. I have attempted several tim
-
How to fix number of messages waiting in screen icon?
I need to know to make the mail icon on IPhone screen be accurate to the number if unopened messages actually waiting, how do I correct this?
-
Adobe Tech support sent me to a download of CS2 files but there appears to be no way to actually initiate the download...