Jdeveloper and iStore - updated instructions?

Greetings to all:
I'm new to Oracle products and tasked with customizing JSPs for an Oracle iStore implementation. I'd like to use JDeveloper to edit and test the JSPs before placing them back to the server. But the documentation for configuring JDeveloper to be the development/test environment for iStore is extremely outdated. The Oracle iStore API Reference Guide (part no. A95199_02) is dated April 2002 and references JDeveloper 3.2.3!
Has anyone successfully setup JDeveloper 9.0.4.0 (or newer version) as their development environment for iStore 11.5.10 (or 11.5.9), or know of an updated document with proper instructions for doing so? I search the metalink site, and was disappointed that I could not find anything current on this topic.

Similar Messages

HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Step-by-step instructions on how to do offline patching and offline updates

I have a computer that has not been updated since Nov 2013.
The computer cannot be connected to the internet at any time.
I have already downloaded the .cab file (per instructions from another person) but I cannot figure out how to install anything.
Essentially, I need step-by-step instructions on how to proceed with offline patching and offline updates.
Please Help.

Hi,
What does your mean by "The computer cannot be connected to the internet at any time"?
Did you mean that you are suffering a network connection problem when checking Windows update or this computer couldn't connect to network all the time?
To install Windows update package offline, since you already download the update packages, just choose and click them to install these updates.
If there is any difficult to install these packages, please feel free let me know.
Roger Lu
TechNet Community Support

Help with opening Adobe Reader and downloading updates

I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
So I went to the Adobe download site to download a new copy of Adobe. When I start the download I get this on the screen: The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068." The memory could not be written. Then two options are listed: click OK to terminate or cancel to debug. So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious addon has caused I.E. to close this webpage.
I don't have AVG running, I do have avast but I've disabled it. I ran Registry Mechanic and an I.E. erasure program but nothing helps.
I have gone into I.E. and reduced the security level to its lowest state but no joy.
So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated. Thanks, in advance, for your reply. Jim R.

Hi Mike..tried that as well but no joy. A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item."
Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief.
It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C. no joy.
Sigh...Jim R.
Jim R.
Date: Tue, 1 Dec 2009 14:50:27 -0700
From: [email protected]
To: [email protected]
Subject: Help with opening Adobe Reader and downloading updates
Under the help menu, there is an option to repair the installation of reader. Did you try that?
>

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Hi,
I scoured the web looking everywhere for a solution to this.
Exit Code 15
OSX 8.5 with Work@Home DVD media for CS6
I followed instructions to run 3rd party cleaner software
I tried the adobe removal tool
removing all copies of adobe software manually
installing from a new account, safe mode, plist everything suggested that i found did not work.
A colleague suggested that removing the below folder would allow the installation:
/Library/Application Supports/Adobe
They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
Cheers,
Smokey

Mac os 10/6/8 and adobe update

i have a mac os 10.6.8 and was instructed to download and install (update) a newer version of adobe. i did that and now i cannot open/access legal fill-in documents that i require for my business. i have not found the adobe site otherwise helpful and i know if i contact apple, they will tell me to contact adobe since this is a software problem. i even tried to uninstall the recent update and could not figure out how to do it from the adobe site instructions. help?

Which Adobe product are you referring to and which version?

HELP: include another page in with JDeveloper and ADF

Hi all,
I am trying to make a layout page with JDeveloper and ADF. But I just can't make things work. I have the pre-coded header and footer html pages and want to include them in a jspx somehow. I tried panelPage too, but the rendering style is away from our pre-coded header and footer.
1. Use jsp:include.
header works fine but footer is rendered before the page content, even if the footer is placed after the page content. Is there a way to customize the position?
<f:facet name="footerFacet">
<f:subview id="footerView"
binding="#{backing_welcomePage.footerView}">
<jsp:include page="/footer.jspf"/>
</f:subview>
</f:facet>
2. Use frameBorderLayout.
I followed the doc and use the document tag. But the frame page is rendered but none of included pages are rendered. So I got a blank page.

<f:view>
<afh:html>
<afh:head title="my frame page">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body>
<afh:frameBorderLayout height="100%" width="100%">
<f:facet name="center">
<afh:frame source="topPage.jspx" name="topPage3"/>
</f:facet>
<f:facet name="top">
<afh:frame source="topPage.jspx" height="200" name="topPage2"/>
</f:facet>
<f:facet name="bottom">
<afh:frame source="topPage.jspx" height="200" name="topPage1"/>
</f:facet>
</afh:frameBorderLayout>
</afh:body>
</afh:html>
</f:view>

<f:view>
<af:document title="FrameBorderLayout Demo">
<af:form>
<af:panelGroup layout="vertical">
<f:facet name="separator">
<af:objectSeparator />
</f:facet>
<af:outputFormatted styleUsage="instruction" value="A frameBorderLayout"/>
</af:panelGroup>
</af:form>
</af:document>
</f:view>

for #1 have you tried throwing a verbatim tag around your includes like:
<f:verbatim>
<jsp:directive.include file="/includes/footer.jsp"/>
</f:verbatim>
it's how we got around intermixing html and jsf

Help in update instruction, please

hi,
i can't make progress in my update instruction and need some help. Oracle makes an ora-00907 message and says that a bracket is missing but in this case it doesn't make sense.
update DM_MESSDATEN
set DM_MESSDATEN.FAUNA_ID=1 where MISSION_ID in (select DM_MESSDATEN.MISSION_ID from
DM_MISSION, DM_MESSDATEN where DM_MISSION.MISSION_ID=DM_MISSION.MISSION_ID AND
measure_name='Transit CT-WB' AND DM_MESSDATEN.FAUNA_ID=999999 AND rownum <2 order by mission_id);
i used this as standalone and it works fine but within update i need a subselect and can't use this join,
select DM_MESSDATEN.MISSION_ID from
DM_MISSION, DM_MESSDATEN where DM_MISSION.MISSION_ID=DM_MISSION.MISSION_ID AND
measure_name='Transit CT-WB' AND DM_MESSDATEN.FAUNA_ID=999999 AND rownum <2 order by mission_id;

Furthrmore, I don't understand your query :
You wrote :
update DM_MESSDATEN
set DM_MESSDATEN.FAUNA_ID=1
where MISSION_ID in (select DM_MESSDATEN.MISSION_ID
 from DM_MISSION, DM_MESSDATEN
 where DM_MISSION.MISSION_ID=DM_MISSION.MISSION_ID
 AND measure_name='Transit CT-WB'
 AND DM_MESSDATEN.FAUNA_ID=999999
 AND rownum <2But where DM_MISSION.MISSION_ID=DM_MISSION.MISSION_ID seems always true, so why add this one ? Or is it a mistake ?
That's not very clear in my head...
Nicolas.

Jheadstart, JDeveloper and CVS and TeamWork

Hi
We're four-developer team and we've been working with Jheadstart for some months. Now we want to work with team options that provide jdeveloper (CVS or SCM). But, we are a too much suprised with all the problems that other developers had with CVS, we read it in some jdeveloper forums (JDeveloper and CVS and TeamWork and JDeveloper and CVS
I get very worry about the problems that developers had with CVS and that at last they don't find a better solution than migrate to jdeveloper 10.1.3. All the forums recomend migrate to jdeveloper 10.1.3 for better support of team work, but I read (some time ago) that jdeveloper 10.1.3 still doesn't support ADF, then I assume we cannot use it with Jheadstart, Am I right? Is there a way to use Jheadstart with JDeveloper 10.1.3 Preview right now?
What do you recomend for team work with Jheadstart?
Thanks in advance
Liceth

Liceth,
As you problably know, the JHeadstart team consists of consultants and we face the exact same problems and share the exact same frustrations as you do on an every day basis at our customer projects. It is indeed not easy to use JDeveloper in a multi-developer environment. In all fairness much of this is a given when doing file-based development, and I have seen the exact same problems in situations where other IDE's such as Eclipse etc were used. But using advanced frameworks like ADF and BC4J makes matters more complex, because the declarative way of developing these applications using drag&drop and powerful wizards make you as a developer be less 'in touch' with the file or files that are actually created and updated, and also there tend to be more files in such an architecture that are changed simultaneously by many developers at once.
Merging is the only way out of this mess, and merge tools are not perfect, far from it. They get better and better but at some point you'll need to understand the semantics of the files that are to be merged to be able to merge them correctly, and merge tools will in all likelyhood never become that smart.
Until they do, the only thing one can do is to tackle the problem from the other side: if merge tools dont understand the files they merge, we should take into account the weaknesses of these merge tools, and set up our files so that changes CAN be automatically merged, or in most cases at least. Indeed, JDeveloper 10.1.3 is taking good steps in this direction for notoriously tricky files such as JPR files and such. But the problem will never completely go away.
As for using 10.1.3, well, as you said the preview does not contain ADF so JHeadstart will never run on it. We are developing JHeadstart 10.1.3 that will run on the production version of JDeveloper 10.1.3, but it will be a long time before that release will see the light. And although JDeveloper 10.1.3 is a kick-ass IDE (imho), it will not magically solve all multi-user issues. It will just be a bit more bearable.
Is there ever a real solution for it? I don't know. I have worked intensively with the Oracle Designer product before I switched to Java, and that tool, which uses a database rather than files to store its information, was almost perfect when dealing with multi-user development. It could do so because the level at which conflicts occur is VERY finegrained (so not at 'code line' level but sometimes as far as 'individual properties in a property inspector' level), plus the advantages of instantaneous locking in the database when modifying something. And, thinking of it, it could do so because it dealt with 'structured objects' rather than files, thereby having some 'semantic' information about the data. I have this feeling we can only 'get it right' if we will treat, for instance, a Java file not as a collection of lines of code, but of a structured object tree with members, constructors, methods, parameters etc. etc., and store it as such, instead of storing it as a flat OS file.
Just ranting here (this really should be a personal BLOG entry rather than a forum post, but oh well). As you can tell, its a subject that is very close to every developer's heart.
Kind regards,
Peter Ebell
JHeadstart Team

JDeveloper and CVS and TeamWork

Hi,
we have a small team with 4 members and are developing in JDeveloper 10.1.2 with CVS plug-in (struts, toplink, jsp).
We are beginners and are frustrated now: every commit/update causes problems.
Always are problems with
- project.jpr files (synchronization among developers)
- sessions.xml (we cannot really add this file to cvs)
- state of offline tables (and digrams) are sometimes wrong show: restart of JDeveloper is necessary
- many JDevelopers files are unvisible, but must be added to cvs
- and more and more
Please - are somebody using JDeveloper & CVS in team with satisfaction? Are our problems beginner-problems or is this way wrong?
Thanks for your experience.
Jara

My biggests issues with JDeveloper and CVS are as follows:
1. Oracle puts out an article that talks about Version controllable XML and the biggest culprits of violators of this rule are the Oracle project files: StrutsPAgeFlow.oxd_struts, ViewController.jpr, and Model.jpr. Not nice when you can no longer open your Struts-config.xml file due to all the <==== lines in the file! In almost all instances, since we've built most of the files and aren't adding/removing much from the project as a whole, we can easily correct these problems then commit again, or just issue a clean update on them, and disregard (especially when it appears to be an ordering issue)
2. Also, we've seen model.jpr files switch contents (areas look like they are swapped around) in between versions. Why? The files are identical except the position of the nodes.
3. I really want to know my OUT-OF-SYNC files BEFORE I do an update. Kind of like the Uncommitted files window, I'd like: Hey, how out of sync am I?
4. The COMPARE utility is very nice, however, once CVS takes over and does the automatic MERGE, you're really left with a mess (at times). Any time we get a "failure to update" message, we issue a compare against the current reposistory version verses version on disk and see what the differences are. Then we search for whether our stuff was merged properly.
5. The only docs I've seen on Jdeveloper and CVS are "introductory" type documentation. Don't put out a document that talks about issues that are "out-of-scope" when these are the very issues that people need to deal with every day, and are looking for answers. The "oracle jdeveloper 10g" handbook is no better, offering about 4 pages of an "overview of CVS".
6. People have asked before about CVS, even on Metalink and an answer from Oracle is to look at an OTN post. I'm sorry, but that really doesn't cut it, especially when your support bill is over $500K/year.
enough rambling...
CVS and Jdeveloper 10.1.2 are working at our shop with 3-4 developers on the project, but it can be paintful during the "conflicts during merge" times.

Unable to install Adobe Photoshop Elements 13, from disc. The disc is rejected in DVD RW drive, no dialogue box comes up. The DVD driver is up to date and have updated flash player.

Unable to install Adobe Photoshop Elements 13, from disc. The disc is rejected in DVD RW drive, no dialogue box comes up. The DVD driver is up to date and have updated flash player.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to Disable the Adobe Flash Player and Reader Updates

Ok, For the last two months or so, I have been plagued by the Adobe Flash Player and Reader updater that will not go away. That's not the worst thing though: Somehow, someway, the Adobe updater subverts my entire windows 7 machine and makes itself the most important program on my system, stopping all other necessary functions. After I just turn it on, the updater will suspend all Windows operations in favor of the updater getting its message out the Adobe "needs" updating. I have tried updating the stupid thing, only to find that after the update goes in, my whole computer locks up and I have to load a system restore point. This thing acts like a virus, and until someone comes up with a way to make it work properly, that's what I'm calling: Adobe creates and sells a computer killing virus. I want a sure fire way to disable the updater that will work, and that will never bug me again about updating the virus. After going through three different computer repair companies, many online forums and chat rooms and my own knowledge of how to disable programs, I have instructed my firewall to block all attempts by Adobe to update. This has to stop.

Flash Player:
Adobe Reader:

Firefox insists I install adobe flash player and gives incomprehensible instructions on how to allow the download. Can I get instructions please

Firefox insists that I install adobe flash player but the instructions given at the link on how to do it are incomprehensible. Can someone interested in Firefox take pity on me and please provide instructions, as the adobe site cannot seem to. Thanks

'''Install/Update Adobe Flash Player for Firefox''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''and'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.5.0_11 (~~red:very old~~); current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

I have Iphone 4 and today update it to ios 7. How can i return previous ios?

I have Iphone 4 and today update it to ios 7. How can i return previous ios?

Downgrading of any version of iOS isn't supported by Apple. If you search the web, you may find instructions that may work, but you're on your own should any problems arise. For many people it goes without problems, but for some it's reportedly disabled their devices.
Regards.

I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

http://support.apple.com/kb/HT5818:
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.

Jdeveloper and iStore - updated instructions?

Similar Messages

Maybe you are looking for