JDeveloper and Netbeans ebooks

Can anyone help me out by sending me ebooks on JDeveloper (Beginners, Intermediate and Advance) and Netbeans (Beginners, Intermediate and Advance) to my email [email protected] I so much more need them to start using JDeveloper and Netbeans as a professional. Also with all necessary Java books that will turn a dummy to Guru programmer.

No Java Books will turn a dummy into a Guru, only experience can do that.

Similar Messages

JDeveloper and Subversion Plugin

We've now adopted Subversion for version control, and we are using the available plug-in for jDeveloper. We are using jDeveloper 10.1.3.0.4.
We've noticed some behaviours:
* An update of the application retrieves new files, but they do not show up in the application navigator until the application is closed and re-opened.
* On XML files sometimes a "version history" results in blank version selection windows (nothing to select). Restarting jDeveloper fixes this.
* Sometimes a checked-out application does not receive any version numbers until we also do an "update working copy".
I've done some searching in the forums, but I haven't found any applicable posts. Are there any support documents that cover problems with Subversion integration?
Keith Peterson

Hey all!
Rather than creating a new topic I decided to steal this one. :)
Well, we just started using Subversion (1.4) as our version control system. We tested it with Netbeans, Eclipse as well as with Tortoise shell extension. Both work fine, except for the fact Netbeans plugin does not implements all good Subversion features yet (e.g. file locking). However, we are experiencing problems with JDev (10.1.3 Prodution). When checking-out or submitting some files from/to SVN repository, an error message is displayed and sometimes, JDev hangs...The error message says something like "...malformed network..." (unable to reproduce it now...sorry). Then, we observed that some files were checked-out/submitted...It raises the exception in the middle of the process.
In all the cases I mentioned here, except Tortoise, our repository and SVN server are installed on remote box, accessed via svn://xxx.xxx.xxx.xxx/repository URL. Eclipse and Netbeans were as well able to access Subversion through WAN (VPN), from my home-office without problems.
Could anyone help me on this JDev issue?
Thanks in advance.
Sorry for my bad English.
Best Regards,
Gustavo

About licensing the Jdeveloper and ADF

Hello everybody :
I have a little doubt about the "JDeveloper and ADF" license
I am planning to start my project using it and I have read the license [http://www.oracle.com/technetwork/licenses/jdev-license-152012.html] and I understood that everything is free for single user except Web Logic server needs to be licensed .
Is that what I have understood correct or not ?
Can I use this tool for developing my small project for my small business enterprise but the only one thing that I am afraid of is in the future I might face some limitations with the Web Logic Server or with any tool of Jdeveloper and ADF , So Shall I start up my project or should I search for another different tool such as Netbeans .
I would like to hear the answer before I put my self in trouble .
Thanks a lot

Well, this will cost you more money the buying a licence as you break the law. To find out what you have to pay you better call a sales person in your area (see home oracle page).
Timo

Installation of J2SE V1.4.2 and NetBeans Java 2 Platform, Standard Edition

I downloaded J2SE V1.4.2 and NetBeans IDE 3.5.8. After this very long download, my ISP disconnected. I re-connected, but am unable to install the download. Please help.
alinda78

I downloaded J2SE V1.4.2 and NetBeans IDE 3.5.8.
After this very long download, my ISP disconnected.
I re-connected, but am unable to install the
e download. Please help.
alinda78

Cannot test portlet using JDeveloper and built-in OC4J

Hi everybody,
I'm not trying to sound stupid but my problem seems to be very basic but i cannot solve it. I'm new to Jdeveloper. Here's my problem.
I'm using Jdeveloper 10.1.2.1.0 (build 1913) to develope a portlet. I deployed it to the built-in Standalone OC4J of Jdeveloper and got the following messages:
---- Deployment started. ---- Sep 6, 2006 7:46:11 PM
Target platform is Standalone OC4J (AppServerConnection2).
Wrote WAR file to D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.war
Wrote EAR file to D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.ear
Invoking OC4J admin tool...
D:\jdev1012\jdk\jre\bin\javaw.exe -jar D:\jdev1012\j2ee\home\admin.jar ormi://cuongttlabtop/ admin **** -deploy -file D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.ear -deploymentName UmaPortlets
checkIsLocalHost() error: cuongttlabtop/: cuongttlabtop/
Uploading file D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.ear to oc4j server side
Notification ==> Application Deployer for UmaPortlets STARTS [ 2006-09-06T19:46:17.406ICT ]
Notification ==> Undeploy previous deployment
Notification ==> Copy the archive to D:\jdev1012\j2ee\home\applications\UmaPortlets.ear
Notification ==> Unpack UmaPortlets.ear begins...
Notification ==> Unpack UmaPortlets.ear ends...
Notification ==> Initialize UmaPortlets.ear begins...
Notification ==> Initialize UmaPortlets.ear ends...
Notification ==> Initialize UmaPortlets begins...
Notification ==> Initialize UmaPortlets ends...
Notification ==> Application Deployer for UmaPortlets COMPLETES [ 2006-09-06T19:46:19.000ICT ]
Exit status of OC4J admin tool (-deploy): 0
D:\jdev1012\jdk\jre\bin\javaw.exe -jar D:\jdev1012\j2ee\home\admin.jar ormi://cuongttlabtop/ admin **** -bindWebApp UmaPortlets UmaPortlets http-web-site /UmaPortlets
checkIsLocalHost() error: cuongttlabtop/: cuongttlabtop/
Exit status of OC4J admin tool (-bindWebApp): 0
Use the following context root(s) to test your web application(s):
http://cuongttlabtop:8888/UmaPortlets
Elapsed time for deployment: 12 seconds
---- Deployment finished. ---- Sep 6, 2006 7:46:23 PM
When i tried to access the URL: http://cuongttlabtop:8888/UmaPortlets by Mozilla Firefox nothing came up instead : 403 Forbidden Directory browsing not allowed
Please help me everybody!!!!! It's urgent. My boss will check my work on this Friday :((.

I tried to access both URL you gave me and got the error:
404 Not Found
Resource /UmaPortlets/providers not found on this server
I really dont understand what's going wrong here?? I followed exactly what Oracle tutorials tell me :(

Errors when using tomcat and netbeans combo.[Solved]

Hi I'm trying to set up a netbeans/tomcat7 development environment for servlet development.
I have tried this on 2 machines without any success.
The steps I have followed are as follows.
First I installed tomcat7 and netbeans from using pacman, then to be able to configure tomcat from netbeans I made the config files write permission 777, as it's just a development server security is not an issue.
From there I started up netbeans started a new project and set the server to tomcat and pointed the Catalina home dir to /usr/share/tomcat7.
When I try to run the example jsp project I get the following error:
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: java.lang.IllegalStateException: No Java compiler available
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:584)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:392)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:389)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:333)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
root cause
java.lang.IllegalStateException: No Java compiler available
org.apache.jasper.JspCompilationContext.createCompiler(JspCompilationContext.java:226)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:636)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:358)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:389)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:333)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
I've spent the last couple of days trying to find any information on this but I cant find anything, so any advice would be much appreciated.
Last edited by darkclown (2011-12-01 05:15:23)

From the error, it appears that there is no JDK installed - only a JRE, could that be the case? If you do have a JDK installed, then Tomcat is not finding it.
I would also not run this on the openJDK, in case you are doing that. I would use the proprietary Oracle/Sun JDK. It's in the AUR, or simply download it from Oracle.
I was not even aware that netbeans and tomcat are available from pacman. I always "install" those myself manually (i.e. unpack them into a folder). They are simply Java apps that can be installed anywhere, as long as you point them to a valid JDK.

HELP: include another page in with JDeveloper and ADF

Hi all,
I am trying to make a layout page with JDeveloper and ADF. But I just can't make things work. I have the pre-coded header and footer html pages and want to include them in a jspx somehow. I tried panelPage too, but the rendering style is away from our pre-coded header and footer.
1. Use jsp:include.
header works fine but footer is rendered before the page content, even if the footer is placed after the page content. Is there a way to customize the position?
<f:facet name="footerFacet">
<f:subview id="footerView"
binding="#{backing_welcomePage.footerView}">
<jsp:include page="/footer.jspf"/>
</f:subview>
</f:facet>
2. Use frameBorderLayout.
I followed the doc and use the document tag. But the frame page is rendered but none of included pages are rendered. So I got a blank page.

<f:view>
<afh:html>
<afh:head title="my frame page">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body>
<afh:frameBorderLayout height="100%" width="100%">
<f:facet name="center">
<afh:frame source="topPage.jspx" name="topPage3"/>
</f:facet>
<f:facet name="top">
<afh:frame source="topPage.jspx" height="200" name="topPage2"/>
</f:facet>
<f:facet name="bottom">
<afh:frame source="topPage.jspx" height="200" name="topPage1"/>
</f:facet>
</afh:frameBorderLayout>
</afh:body>
</afh:html>
</f:view>

<f:view>
<af:document title="FrameBorderLayout Demo">
<af:form>
<af:panelGroup layout="vertical">
<f:facet name="separator">
<af:objectSeparator />
</f:facet>
<af:outputFormatted styleUsage="instruction" value="<b>A frameBorderLayout</b>"/>
</af:panelGroup>
</af:form>
</af:document>
</f:view>

for #1 have you tried throwing a verbatim tag around your includes like:
<f:verbatim>
<jsp:directive.include file="/includes/footer.jsp"/>
</f:verbatim>
it's how we got around intermixing html and jsf

10g BPEL process upgrade to 11g hangs in Jdeveloper and Ant script

I have successfully upgraded several 10g (10.1.3.4) BPEL processes and ESB services using Jdeveloper 11g (11.1.1.6.0) migration wizard and deployed them to an 11g environment. Both 10g and 11g environments are up and running.
However, my 11g jdeveloper hangs when migrating the next BPEL process. It hangs at the message box with the title: "Migration Status". I tried the Ant script and it hangs too. It hangs after printing out:
"CompositeRefs
[upgrade] WARNING: UPGBPEL-02009: No Binding setup for : "soapCheckPrivileges"
. This will cause compilation of the upgraded project to fail. Check SOA Upgrade
documentation on manual steps necessary to bind this composite reference. If ne
cessary, upgrade and deploy any dependencies. If planning to retain 1013x nodes
in this projects dependency tree, check earlier part of this log for 1013x WSDL
URLs that can be used."
I guess it makes sense since Jdeveloper and Ant script use the same code base for migration.
One other observation is that if I kill the hanging jdeveloper process and reopen it and go through the migration wizard again, it will be successful without hanging. However, when I fix all the wsdl reference and do a build and deploy to sar. The resulting sar is defective and cannot be deployed to Weblogic even if both build and deploy to sar report success. The defective sar contains only scac.log and scac-log.xml, not even composite.xml.
One difference between this BPEL process and others I have successfully upgraded is that it depends on an ESB service (this esb service has been upgraded and deployed to 11g).
Any ideas?
Thanks,

I will answer my question. I killed the migrating Java process and the migrating wizard will report failure of migrating the .jpr file. Actually, the only thing missing in the migrated .jpr file is deployment profile which I can generate from deployment menu. And I can deploy the migrated process. This works as a workaround.

JDeveloper and JSP

I am a new person to JDeveloper technology.
I wanted to know that if I create JSP using JDeveloper 3.0, and then upload the JSP pages on a UNIX server, will I need application server.
What is JServer ?

Anny,
You can developer Java Server Pages using JDeveloper and deploy them to any platform.
If your deployment platform is UNIX, you will need an application server that supports the Servlet API. Apache plus Tomcat is a good option. You can learn more about it at www.apache.org.
JServer is the VM that runs inside the Oracle8i database. You can learn more about it on the Oracle8i page of OTN.
Laura

I'f downloade adobt epub and the ebook that I bought but gets a error 404 and ' cannot open file'

I have downloaded epub and the ebook I have bought but gets a error 404 and ' cannot open this file' on my samsong tablet if I try to open please help !

You'll want to ask in the Digital Editions forum.

Oracle's XML Publisher in JDeveloper and XSQL Servlet

A While ago, in this thread JDeveloper 10g, XSQL and FOP , was mentioned an ongoing effort for the "integration of Oracle's XML Publisher in JDeveloper and XSQL Servlet", Is this still happening ?, will this be something will be able to use without having to be an Oracle Apps shop? Any additional info would be appreciated.

Hi,
is there any progress about XML publisher integration with JDeveloper. I'm right now examining XML publisher but there is no explicit directions and explanations of using XML publisher with jdeveloper.
any news !?
best regards...
--barisk

JDeveloper and ADF 11g Release 2(11.1.2.0.x) compatible WebCenter Version

We are looking to upgrade ADF to 11.1.2.0 and looking for WebCenter compatibility.
Could you please let me know WebCenter compatible version for JDeveloper and ADF 11g Release 2 (11.1.2.0.x) ?
Thanks
JP

Looking at 11.1.2.0.0 note on
http://www.oracle.com/technetwork/developer-tools/jdev/downloads/index.html
and seeing, "This version of JDeveloper doesn't include the SOA and WebCenter pieces - to use these components you'll need to download Oracle JDeveloper 11.1.1.5.0."
Does that mean, 11.1.2.0.0 can't be used with WebCenter?

Jheadstart, JDeveloper and CVS and TeamWork

Hi
We're four-developer team and we've been working with Jheadstart for some months. Now we want to work with team options that provide jdeveloper (CVS or SCM). But, we are a too much suprised with all the problems that other developers had with CVS, we read it in some jdeveloper forums (JDeveloper and CVS and TeamWork and JDeveloper and CVS
I get very worry about the problems that developers had with CVS and that at last they don't find a better solution than migrate to jdeveloper 10.1.3. All the forums recomend migrate to jdeveloper 10.1.3 for better support of team work, but I read (some time ago) that jdeveloper 10.1.3 still doesn't support ADF, then I assume we cannot use it with Jheadstart, Am I right? Is there a way to use Jheadstart with JDeveloper 10.1.3 Preview right now?
What do you recomend for team work with Jheadstart?
Thanks in advance
Liceth

Liceth,
As you problably know, the JHeadstart team consists of consultants and we face the exact same problems and share the exact same frustrations as you do on an every day basis at our customer projects. It is indeed not easy to use JDeveloper in a multi-developer environment. In all fairness much of this is a given when doing file-based development, and I have seen the exact same problems in situations where other IDE's such as Eclipse etc were used. But using advanced frameworks like ADF and BC4J makes matters more complex, because the declarative way of developing these applications using drag&drop and powerful wizards make you as a developer be less 'in touch' with the file or files that are actually created and updated, and also there tend to be more files in such an architecture that are changed simultaneously by many developers at once.
Merging is the only way out of this mess, and merge tools are not perfect, far from it. They get better and better but at some point you'll need to understand the semantics of the files that are to be merged to be able to merge them correctly, and merge tools will in all likelyhood never become that smart.
Until they do, the only thing one can do is to tackle the problem from the other side: if merge tools dont understand the files they merge, we should take into account the weaknesses of these merge tools, and set up our files so that changes CAN be automatically merged, or in most cases at least. Indeed, JDeveloper 10.1.3 is taking good steps in this direction for notoriously tricky files such as JPR files and such. But the problem will never completely go away.
As for using 10.1.3, well, as you said the preview does not contain ADF so JHeadstart will never run on it. We are developing JHeadstart 10.1.3 that will run on the production version of JDeveloper 10.1.3, but it will be a long time before that release will see the light. And although JDeveloper 10.1.3 is a kick-ass IDE (imho), it will not magically solve all multi-user issues. It will just be a bit more bearable.
Is there ever a real solution for it? I don't know. I have worked intensively with the Oracle Designer product before I switched to Java, and that tool, which uses a database rather than files to store its information, was almost perfect when dealing with multi-user development. It could do so because the level at which conflicts occur is VERY finegrained (so not at 'code line' level but sometimes as far as 'individual properties in a property inspector' level), plus the advantages of instantaneous locking in the database when modifying something. And, thinking of it, it could do so because it dealt with 'structured objects' rather than files, thereby having some 'semantic' information about the data. I have this feeling we can only 'get it right' if we will treat, for instance, a Java file not as a collection of lines of code, but of a structured object tree with members, constructors, methods, parameters etc. etc., and store it as such, instead of storing it as a flat OS file.
Just ranting here (this really should be a personal BLOG entry rather than a forum post, but oh well). As you can tell, its a subject that is very close to every developer's heart.
Kind regards,
Peter Ebell
JHeadstart Team

JDeveloper and CVS and TeamWork

Hi,
we have a small team with 4 members and are developing in JDeveloper 10.1.2 with CVS plug-in (struts, toplink, jsp).
We are beginners and are frustrated now: every commit/update causes problems.
Always are problems with
- project.jpr files (synchronization among developers)
- sessions.xml (we cannot really add this file to cvs)
- state of offline tables (and digrams) are sometimes wrong show: restart of JDeveloper is necessary
- many JDevelopers files are unvisible, but must be added to cvs
- and more and more
Please - are somebody using JDeveloper & CVS in team with satisfaction? Are our problems beginner-problems or is this way wrong?
Thanks for your experience.
Jara

My biggests issues with JDeveloper and CVS are as follows:
1. Oracle puts out an article that talks about Version controllable XML and the biggest culprits of violators of this rule are the Oracle project files: StrutsPAgeFlow.oxd_struts, ViewController.jpr, and Model.jpr. Not nice when you can no longer open your Struts-config.xml file due to all the <==== lines in the file! In almost all instances, since we've built most of the files and aren't adding/removing much from the project as a whole, we can easily correct these problems then commit again, or just issue a clean update on them, and disregard (especially when it appears to be an ordering issue)
2. Also, we've seen model.jpr files switch contents (areas look like they are swapped around) in between versions. Why? The files are identical except the position of the nodes.
3. I really want to know my OUT-OF-SYNC files BEFORE I do an update. Kind of like the Uncommitted files window, I'd like: Hey, how out of sync am I?
4. The COMPARE utility is very nice, however, once CVS takes over and does the automatic MERGE, you're really left with a mess (at times). Any time we get a "failure to update" message, we issue a compare against the current reposistory version verses version on disk and see what the differences are. Then we search for whether our stuff was merged properly.
5. The only docs I've seen on Jdeveloper and CVS are "introductory" type documentation. Don't put out a document that talks about issues that are "out-of-scope" when these are the very issues that people need to deal with every day, and are looking for answers. The "oracle jdeveloper 10g" handbook is no better, offering about 4 pages of an "overview of CVS".
6. People have asked before about CVS, even on Metalink and an answer from Oracle is to look at an OTN post. I'm sorry, but that really doesn't cut it, especially when your support bill is over $500K/year.
enough rambling...
CVS and Jdeveloper 10.1.2 are working at our shop with 3-4 developers on the project, but it can be paintful during the "conflicts during merge" times.

JDeveloper and XML Publisher with EBS ?

Hi All,
Can anyone clarify my doubts ?
I am new to Java and i have some experience in XMLP, but i saw in the User guide the Java API's, how to and where to run those API's.
And is JDeveloper used with XMLP to run Java API's ?, if yes can u pls explain how to start working on that and what is the relation between JDeveloper and XML Publisher in EBS.
I really appriciate your early reply.
Thanks in advance.

XML Publisher ships with 2 XDK parsers a 9i version for backward compatibility and 10g version - you can switch at runtim using the properties. However, you have to make sure that the XML Publisher versions of the libraries are used and not the ones coming with i.e. jdeveloper version or oc4j version that you are using. You should use the version shipped with XML Publisher, because these versions are thoroughly tested with XML Publisher.
See the deployment notes in the install document:
Oracle OC4J Deployment Notes
The version of the XML Parser shipped with Oracle OC4J is incompatible with XML Publisher. When you create an XML Publisher application for OC4J you need to configure the system to use the XML Publisher version of the XML Parser. This can be accomplished by setting an orion-web.xml configuration file with the following content:
<?xml version = '1.0' encoding = 'windows-1252'?>
<orion-web-app>
<web-app-class-loader search-local-classes-first="true" />
</orion-web-app>

JDeveloper and Netbeans ebooks

Similar Messages

Maybe you are looking for