Jdeveloper can't find my first page

When I try to run my application in Jdeveloper (9.0.3.3) which worked last week, it says it can't find the target page. I can't seem to figure out what I changed.
The error message is
"The page cannot be found"
I did install the uix demo pack along with a fresh install of the OC4J server. I installed all of that to a separate directory so it wouldn't overlay the existing directory.
Also, if I run the demo pack, it works just fine.
Any suggestions on where I should look to identify what was changed in my JDeveloper environment?
Thanks, Steve

I am closing this topic. I resolved the problem by re-installing Jdeveloper 9.0.3.3 and re-installing my application.

Similar Messages

I can only find the first page of a 5 page saved document on my macbook pro. Also all my sent email is missing.

I saved a 5 page document on my macpro laptop in iwork. I emailed the document. The person claimed she didn't get the email. When I went to look at my sent mail the entire sent mail folder is gone and my saved document is also gone except for the first page. What happened? How can I get it back?
Also, how did my Notes app stuff end up in my aol emal folders?
Message was edited by: nancyloufromny

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. How far do you get?

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Links to site come up "can't find the iweb page you've requested..."

hi-
i was able to successfully republish my updated website (thru mobile me). it was originally published thru .mac last year before .mac changed to mobile me. however, i noticed that my web address does not have "mobile me" in the title as in some of the other websites that i've check out on the boards here. i wonder if that's a problem because when i've e-mailed links (by dragging the address or even copy & paste) to my updated website, the links don't work. it goes to a mac page that says "we're sorry but we can't find the iWeb page you've requested..." however, if i go thru a search engine (entering the first couple words of my site title), the website comes up fine. also, if i type in the full address manually in an e-mail, the link works. the problem seems to be in the dragging of the address directly from the site. are these things related? my website address is: http://www.hale-o-lani-aloha.com. (feel free to critique the site if you have any opinions about it)
thanks.

Deona,
Here's another post that might prove useful to you, from the iWeb06 forum. This may help you in the future when you want to update your site:
Because your site is already up on the .Mac server, I would never engage in publishing the entire site again; unless, of course, you just rebuilt the whole thing. Note which pages you made changes to, and publish your site to a folder. Double-click this folder on your desktop, and open the window in column view. Navigate to the Page_files, and the Page.html.
With the Finder window open that is showing your site, Command+N. Another Finder window will open. In this window, navigate to the same files on your iDisk, again, using the Go menu in Finder:
Go/iDisk/My iDisk/Web/Sites/iWeb/SiteFolder/Page_files(page.html)
From the iDisk Finder window, drag the Page_files/page.html of the pages that you made changes to to the trash. Now, from the other window, the window which shows your site in the published folder, drag these same files into the iDisk window, placing them in the same SiteFolder directory from which you dragged files to the trash. If you created a new page, you will need to also replace all other Page_files/page.html files which link to new page(s).
What you have just done is replace only the changed files. Because the .Mac slideshow assets are already uploaded, you should not have lost the .Mac slideshow for your photo's pages. Sometimes, it can even get simpler....as an example, I have a site that contains numerous .pdf files. With these, I don't even touch the Page_files/page.html files; I simple go into the Page_files folder and replace the old .pdf file with the new, updated one. Obviously the files are named exactly the same.
This is the best way for you to update your existing site on .Mac. You might also take a look at the ftp client, "Transmit". It works well with .Mac, with the exception that you must use the "Publish to a folder" command in iWeb.
-Mark

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right.

An image comes on my screen, but I can only see the first page. When I try to print, I get a blue question mark and can't print.

Recently when I pull up a multi-page document from an internet site, I can only see the first page. I can't scroll through it. When I try to print, I get a big blue questionmark. What's the solution to this, please?

Thank you so much!! So simple, yet so effective! Am happy!

Can only see the first page of books downloaded on Nook using Overdrive, how do I fix?

Can only see the first page of each chapter of downloaded books on my Nook, how do I fix?

can anyone help me

Why can I only print first page

Why can I only print first page of an email wirelessly with my brother printer

Sophie Hubble which Adobe software or service is your inquiry in reference too?

Where can I find the install page for CS5 Production Premium?

I need to reinstall my copy of CS5 Production Premium. Where can I find the install page for that?

Check your Adobe account online to see if there is a link to download from there.
Alternately, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

But we can't find the iWeb page you've requested

This is getting FRUSTRATING!
I have created my iWeb pages, clicked PUBLISH ALL TO .mac I get a CONGRATULATIONS message that it's loaded, I click VISIT SITE, and I get this bloody error message
"We're Sorry but we can't find the iWeb page you've requested" It's possible that:
· The address was entered incorrectly. Check your spelling and try again.
· The .Mac member of this name has either created a page and removed it or has never published an iWeb site.
· There is no .Mac member of this name. If you'd like this member name for yourself, sign up for a .Mac account right now and have your own iWeb site in minutes.
Well, I don't know what the deal is. I have done everything I can think of, I am doing everything I am supposed to do! HELP!!!

Nope. Says does not exist. IT DOES! LOL... trust me.
http://web.mac.com/kendles/iweb/Welcome.html
There is no site name between "iweb/" and "/Welcome.html, so that url can't be correct. What is the name of your site inside the iWeb app.

I want to print an email which has multi pages but I can only print the first page

Can anyone help please?
i want to print an email which has multi pages but I can only print the first page
Tony

Firefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
I have two questions:
To fix, do a custom setting, for the Header and Footer as follows:
Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
&T
&U . . . . . . . &D . . . . . . . &PT
&D shows the Short date as: M/d/yyyy - and then the time
To change the format of the Short date in Win 8.1, go to:
Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
QUESTIONS:
1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
Address Bar / about:config
Enter keyword "edge"
Then change all four values for the printer you're using to:
print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5

How can i find that which page is opened in other browser window

How can i find that which page is opened in other browser window
Can i restrict opening of a new instance of browser by end user.
Thanks in advance.

you can use Javascript functions/varibles.
In any page you can insert a special form like this:
<form name="myNameWindow">
<input type="hidden" name="myName" value="Ivan_pag01">
</form>
and in the other reading that value.
Obviusly you have to save a reference in a variable of the other window.
This is possible only if:
1) other page is in the same browser window but in an other frame
2) you have generated the other page via an "window.open" function (or your page is generated from it via that function)
-- Ivan

Where can i find the first iPhoto

Where can i find the first iphoto?

Best if you try and explain what you are trying to acheive.
Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
There are tutorials here
http://www.apple.com/findouthow/photos/
Regards
TD

Whilst setting up home share on my husband's laptop was quite easy I can't find a home page on iTunes on my new iPad to do it?

Whilst setting up home share on my husband's laptop was quite easy I can't find a home page on iTunes on my new iPad to do it?

The ID you use for home sharing should be the same on all devices, it doesn't need to be the same ID you use for other things.
So if together you have the ID's [email protected] and [email protected] (say) then you might use [email protected] for your iTunes Store account and [email protected] for home sharing and he might use [email protected] for his iTunes Store account and [email protected] for home sharing

TS3991 where can I find my web page I created on web me?

where can I find my web page I created on web me?

I'm not sure what web me is. Are you referring to iWeb, Apple's former web page editor/manager?
If you mean the web page that was on MobileMe, it's been deleted. Last month, MobileMe was shut down and iCloud took over. Unfortunately, iCloud does not provide a web page service, nor a photo gallery.
However, if you used iWeb to create the site, then you should still have the files on your mac. These can be uploaded to another web provider, which you would have to subscribe to. There are hundreds if not thousands of providers around the globe.

Jdeveloper can't find my first page

Similar Messages

Maybe you are looking for