Jdeveloper: Failed to load file

Hi All,
I am using jdeveloper version 9.0.3.11.31 for OA-Framework application development.
When i try to run an xml file in, it compiles fine but gives me the following error
Failed to load "file:/D:/xxx/myprojects/xxxxx/oracle/apps/xxxxxxx/xxx/xxxxxxx/webui/xxxxxxxxxxxxxxPG.xml" file.
I will appreciate any ideas to solve the above error.
--Riyaz
Edited by: user8855172 on Dec 22, 2009 1:52 AM

Hi,
9.0.3 is no longer supported. If you run this in teh context of OA framework then please try the OA framework forum here on OTN. You find it following the "Forum Home" link on to of this page
Frank

Similar Messages

Jdeveloper Fails to load PG file

Hi All,
I am using jdeveloper version 9.0.3.11.31 for OA-Framework application development.
When i try to run an xml file in, it compiles fine but gives me the following error
Failed to load "file:/D:/xxx/myprojects/xxxxx/oracle/apps/xxxxxxx/xxx/xxxxxxx/webui/xxxxxxxxxxxxxxPG.xml" file.
I will appreciate any ideas to solve the above error.
--Riyaz

Dear Anil,
Thanks for the reply.
I went to D:/xxx/myprojects/xxxxx/oracle/apps/xxxxxxx/xxx/xxxxxxx/webui and checked for the existence of the PG file. It is available. Infact I opened it to see the correct XML syntax present in it.
Any other ideas?
--Riyaz

ServerAdmin fails to load file lists for shares when bound to OD

Hello,
We're experiencing an issue on a couple of our Mac servers recently with Server Admin. We're an all Open Directory environment with DNS running on BIND on a Linux.
When using Server Admin (even locally on the server), browsing file shares in AFP, SMB, or NFS fails to load lists and permissions. Sometimes it does, after a long wait and a spinning gear. I've narrowed it down to only occuring when connected to our Open Directory master, either as a replica or simply authenticating against it. As soon as I disconnect from OD, things are as fast as expected.
This isn't limited to share points - even browsing the local volumes in Server Admin is extremely slow to load, if it even loads at all.
This issue doesn't occur on the server running the OD master, however (browsing its own file shares).
Using the command line (sharing -l) is instant on those servers, too.
DNS seems to be fine on each server - A records point to the correct addresses and PTRs point back. A "changeip --checkhostname" returns successful.
In addition, I have the following DNS records:
_kerberos-adm._tcp SRV 0 0 749 odmaster.example.tld.
$ORIGIN _udp.odmaster.example.tld.
_kerberos       SRV 10 0 88 odmaster.example.tld.
_kerberos-master    SRV 0 0 88 odmaster.example.tld.
_kpasswd        SRV 0 0 464 odmaster.example.tld
Additionally, both servers with the issues have been completely reinstalled from scratch without importing any preferences or settings. Initially, I thought it might be 10.6.7+, so I only applied the 10.6.6 combo update, but the issue persists.
Any insight here?
Thanks
Edit: When it occurs, I have a bunch of the following in my system.log:
8/10/11 2:48:51 PM          Server Admin[376]          gotServerError:kNetworkError forTransaction:<XSAdminTransaction: 0x118a2d8e0>

Fixed!
I was watching my DNS logs for one of the hosts in question and noticed it was looking up another server that's been offline for a few months.
I looked on the OD master for what it had for automounts and noticed it had several "stale" automounts for a few servers that are offline.
dscl -u diradmin -p /LDAPv3/127.0.0.1 -list /Mounts
I deleted those (e.x. dscl -u diradmin -p LDAPv3/127.0.0.1 -delete /Mounts/server1.tld:\\/sharename)
Now things are snappy again. Hope this helps someone else that may encounter such an issue.

SSIS fails to load files from network when executed via SQL server Agent (SQL server 2008 R2 SP 2)

Hi All,
I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
Thanks,
Andrei
SSIS question

Hi All,
Thanks for your responses.
I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
Thanks,
Andrei
SSIS question

Failed to Load AVI in the built in Movie creator

Everytime I select a video or videos in the vado central application and click create movie it says: An error occurred while adding the following file(s):
Failed to load file: F:\DCIM\00VIDEO\filename.AVI. I tried uninstalling, cleaning the registry, and reinstalling and still had the same problem. Also when I click the plus sign it only allows me to add pictures and not video. I also tried to drag in videos from the desktop and they just dont appear to go in.

Had exactly the same problem, but found the reason for it tonight: Had an old " ffdshow" codec file from 2006 that most likely was the culprit.
Go to Control Panel " Add/Remove Program" and search for such a codec file.
After I deleted this old? "ffdshow"? file the Vado software loaded the video clips as it was programmed to do.
Good luck, hope this hel
ps.

"Load files into Photoshop layers" fails to complete CS6

Hi all,
Hoping someone can help with the folling problem with Photoshop & Bridge CS6
When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
Over the last week it has become more frequent, to a point where this workflow is unusable.
A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
I have tried the following:
In Photoshop preferences:
disabling the "Use graphics Processor"
Increasing or decreasing the amount of RAM available to Photoshop
Changing the cache levels or changing the cache tile size
changing the scratch disk
Trashing the Photoshop preferences file (Photoshop Settings.psp)
In Bridge
Purging the cache
Increasing or decreasing the cache size
Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
In general system
Quitting extra programs (Safari, Thunderbird, iTunes)
Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
Rebooting the computer - again will work for a few images sets before again failing.
Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
System is as follows:
Mac Pro 2 x 2.66 Quad Core
24GB RAM
ATI Radeon HD 4870 512
OSX Lion 10.7.4
I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
Hoping someone has an answer.
Thanks.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Failed to load database information. Error in File temp_

Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
   at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
   at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
   at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport3()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=ourdb;"
        connectionString += "User ID=ouruserid;Password=ourpsw"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
        'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
        'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
        crReportDocument.SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 0, 0)
        DataSet1.Dispose()
        adoOleDbDataAdapter.Dispose()
        adoOleDbConnection.Close()
        adoOleDbConnection.Dispose()
        crReportDocument.Dispose()
        Me.Close()
    End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <startup useLegacyV2RuntimeActivationPolicy="true">
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
    </startup>
    <system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
Bruce

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Crystal Reports exception: "failed to load database information" error in file guid.rpt file

Please also see attachment (same info as below).
Background
This code works in windows XP (32 bit), using/complied VS2005 with no problems.
Please contact:
Hamid Deljoo at work 416-867-8977 (8am to 4pm EST)
Problem is:
We are migrating this code from XP to windows 7 (using win7 64bit for development to be deployed on win7 PCs 64bit).
When trying to display a crystal report (.rpt) an exception is raised.
Exception info is:
CrystalDecisions.CrystalReports.Engine.DataSourceException was unhandled by user code
Message=Failed to load database information.
Error in File wbstats {CC56070D-0873-4815-BAD5-0DA0FBAEDCB6}.rpt:
Failed to load database information.
Source=CrystalDecisions.ReportAppServer.DataSetConversion
StackTrace:
      at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
      at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
      at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
      at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
      at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export(ExportOptions options)
      at net.bmogc.cas.ui.ReportViewer.LoadStatsReport(String warmBodyCode) in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\ReportViewer.cs:line 739
      at net.bmogc.cas.ui.WarmBodyManage.Stats() in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\WarmBodyManage.cs:line 873
      at net.bmogc.cas.ui.WarmBodyManage.CASAuthgation_ToolStripItem_Click(Object sender, EventArgs e) in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\WarmBodyManage.cs:line 593
      at net.bmogc.cas.ui.CASAuthgation.<>c__DisplayClass15.<CreateToolStripItem>b__14(Object sender, EventArgs e) in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\Common\CASAuthgation.cs:line 1242
      at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
      at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
      at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
      at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
      at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
      at System.Windows.Forms.Control.WndProc(Message& m)
      at System.Windows.Forms.ToolStrip.WndProc(Message& m)
      at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
      at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
InnerException: System.Runtime.InteropServices.COMException
      Message=Failed to load database information.
Error in File wbstats {CC56070D-0873-4815-BAD5-0DA0FBAEDCB6}.rpt:
Failed to load database information.
      Source=""
      ErrorCode=-2147482931
      StackTrace:
            at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
            at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
      InnerException:
Background info is:
Vs2013 (update 3, latest version) is used.
Installed: Crystal Reports, Support Pack 10 (v. 13.0.10.1385), using 64 bit
VS2013 build settings.

What database are you using?
What database client?
How are you connecting to the database (ODBC, OLE DB, etc.)?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

XMLSocket "Failed to load policy file" error

I am trying to use an XMLSocket.swf file, and it is not connecting. Do I need to open up a port on my server? I am trying to run this on a dedicated remote Windows 2008 server.
Here is the error from FlashFirebug:
     OK: Root-level SWF loaded: file:///C|/Users/vcaadmin/AppData/Roaming/Mozilla/Firefox/Profiles/70vbx4ys.default/exten sions/flashfirebug%40o%2Dminds.com/chrome/content/flashfirebug.swf
    OK: Root-level SWF loaded: http://speak-tome.com/flash/XMLSocket.swf
    OK: Searching for <allow-access-from> in policy files to authorize data loading from resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf
    Error: Failed to load policy file from xmlsocket://speak-tome.com:9997
    Error: Request for resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf has failed because the server cannot be reached.
My crossdomain.xml is saved to the root of the web directory and looks like:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="master-only"/>
    <allow-access-from domain="*"/>
    <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
    </cross-domain-policy>
I notice that both ports 843 and 9997 are closed for my domain (speak-tome.com - 72.167.253.16) when I check using a service such as yougetsignal.com/tools/open-ports. Do I need to get these ports open to get the policy file to work?

As a test, I uploaded my Flash/Gaia site into an existing site on my old host. And although the site actually works in this setting, when I run things in the FlashPlayerDebugger, I'm still getting Security Sandbox Violations - so (as adninjastrator suggested in earlier post), this may have nothing to do with the DNS changes - but perhaps with my setting things up wrong somewhere so that the Flashplayer is trying to access my local computer - maybe??
Debugger logs gives me this:
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://recreationofthegods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
So, I've now uploaded the identical bin (which contains all the files for my site) - but I'm getting different behaviors on the two hosts.
On the new holistic servers, the site won't go past the first page: www.yourgods.com
On the 1&1 servers, I still get runtime errors in FlashPlayerDebugger - but the site runs ok - http://www.RecreationOfTheGods.com/bin/index.html
Posting those links in hopes someone with more experience in these sandbox issues can help steer me in the right direction.

Server Admin Problem - File Sharing fails to load

We recently switched over from a 10.4 server to an Intel Quad Core Xserve running 10.5.8. Things seemed to be working for about a week but now The File Sharing part of Server Admin fails to load. After spinning for a few minutes I get a kNetworkError on the File Sharing Service.
I'm not totally through setting up all the share points so this is causing quite a problem. Otherwise the Sharepoints that are set up are working properly. The first time this happened a server restart cleared the problem. This time nothing seems to help.
Anyone have a cure for this?

The problem seems to be getting worse. Once the error occurs some of the other services are not available through SA either. Anybody have any suggestions, or is it a reformat and reinstall situation?

Failed to load source - file upload post

Hello All,
I'm trying to implement an AJAX type of file upload. I'm using Sencha's upload form which creates an iframe on the go(this si doen with the parameter fileUpload true). This should take care fo the mechanics involved in AJAX file uploads inside APEX.
I can see an attempt to upload the file but then I get the response:
Failed to load source for: http://jsnotions.homelinux.com/apex/wwv_flow.accept?p_flow_id=124&p_flow_step_id=1&p_instance=1971193010922945I tried creating a branch on the page to branch to another page which has an On Page Process - On Load Before Header which returns a JSON formated message.
BEGIN
HTP.P('{"success":true}');
END;Oddly enough when I check the APEX view I see that the file has not been uploaded to the APEX server. Can anybody offer some advise or a solution to AJAX file uploading inside APEX.
Thanks in advance
Jan

Hello All,
I'm still trying to crack this one. Getting the following error.
More files were uploaded in this request than the number of file item types defined on the page.I'm using an javascript extension whihc creates and ifram through whihc I'm uploading the file. That seems to be configured properly.
As for the page setup, I've tried several variations and none seem to work.
I tried to create a file browser item, and set some hidden html class on it. Then when I use the javascript uploader, I set the value inside the file browser($s('P1_FILENAME', myval)), this was to get over previous errors of
failed to load sourceNow apex doesn't like that as well, so I'm thinking its just not possible to do a clean javascript file uploader. I guess the only option now is to create a separate page, hide the items and display it into an iframe.
Any thoughts on fileuploader with javascript inside APEX? Oh, almost forgot to mention that I'm using the fileuploaderfield from sencha.
Thanks
Jan

Failed to load database information. Error in File ReportName {E420E88A-5947-4925-844E-75E6311D3EB3}.rpt: Failed to load database information.

Hi All,
We've been running CR for VS2010 for a number of years in our web app without any issues. Using the same code we recently upgraded our application to support x64 and we have run into this error on our QA servers:
Failed to load database information. Error in File ReportName{Guid}.rpt. Failed to load database information.
Here's are server setup:
Windows Server 2012 Datacenter x64
SAP Crystal Reports Runtime Engine for .Net Framework (64-bit)
IIS 8
Database Server
Oracle 12c
Interestingly, Crystal Reports works fine on our dev machines and it also works on our dev machines if I connect to the QA Database server directly. So I've ruled out any Oracle issues.
I believe the permissions are set up correctly for CR to run, but I'd like to know what permission CR needs to run. I can't find a definite answer reading the forum posts or on the WIKI.
I've used Process Monitor and there seems to be some permission issues with the uf12manager.DLL. See attached document.
I'm really stuck here and any help is appreciated.
Thanks!

Nothing to do with UFL manager, that may be a missing dependency.
Search on a kbase on how to enable crlogger, that may tell you what is failing.
Typical Oracle issues on a 64 bit app is I believe you need to install the Oracle 64 bit Client and then 32 bit client.
Do we support Oracle 12? No we don't...
See this PAM for more info:
SAP Crystal Reports 2011 Product Availability Matrix (PAM)
Open the link for the Database connectivity....
Don

Known Issue: MIDL fails to compile IDL files in UAP projects. Gives following error: midlrt : error MIDL4034: Failed to load a dependency file. Windows.winmd (HRESULT:0x80070002 - The system cannot find the file specified. )

Visual Studio gives the following error:
midlrt : error MIDL4034: Failed to load a dependency file. Windows.winmd (HRESULT:0x80070002 - The system cannot find the file specified. )
This is because Visual Studio is looking for a WinMD file that contains the base types. Unfortunately the metadata path passed by default to MIDL through Visual Studio does not resolve to the correct file.

Work around:
Update the "Additional Metadata Directories" for MIDL to include the Windows.Foundation.FoundationContract.WinMD
To update the “Additional Metadata Directories” in Visual Studio, do the following:
1) Right click on your C++ Project file.
2) Choose properties.
3) Under Configuration Properties, click MIDL
4) Under MIDL choose “Command Line”
5) In the Additional Options text box enter:
/Metadata_dir "C:\Program Files (x86)\Windows Kits\10\References\Windows.Foundation.FoundationContract\1.0.0.0”
or on X86 machines
/Metadata_dir "C:\Program Files\Windows Kits\10\References\Windows.Foundation.FoundationContract\1.0.0.0”

Error message 'The Outlook data file (.pst) failed to load for this session.' when adding PST in Outlook addin

Hi All,
I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
Could anyone help me out on how to resolve this? I do not know where to begin even.
Thanks!!
Cheers!

Hi Eugene,
Thanks for the reply.
I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
I would assume the problem is with that file, as no other clients are having any issue like this.
Have you come across this error message? Do you know what sort of scenario could be responsible for it?
Or would I have to file it under "random problems generated by network PSTs"? :P
Cheers!

Jdeveloper: Failed to load file

Similar Messages

Maybe you are looking for