JDeveloper integration with Serena PVCS Version Manager

I have seen that Oracle JDeveloper 10.1.3 now supports Serena Dimensions for versioning. What about Serena PVCS Version Manager 8.1? Are there any plans to integrate JDeveloper with the PVCS Version Manager?

Hi all,
Ward - Brian is absolutely right. As I said in my first posting on this topic (above), we have
not yet developed an extension for JDeveloper to enable users to work with PVCS Version
Manager, which I believe is a specific product, rather than an interface.
This is why I'd greatly appreciate it if you could possibly provide more details of this Interface
and indeed what Oracle support for PVCS with JDeveloper Merant referred to. Please see my
first posting above for more details.
Brian - I'm sorry you do not agree with our approach of using the open published SCM Framework
to build your own extensions for using JDeveloper with other source code control tools than those
we support.
In an ideal world, we would have been able to offer support for every source code control tool on
the market with our first release of 9i JDeveloper. We were very keen to be able to achieve this and
we still plan and are currently looking into supporting more tools going forward and as many tools as
possible in the long term.
Unfortunately, we only have limited time available for each release and based on the feedback we
received, after our committment to support Oracle9i SCM, CVS and ClearCase were the most requested.
Therefore, we tried to reach a compromise to enable users to provide their own support for a specific
tool should they wish, if they did not use any of those tools supported. Indeed, our research suggests
that the market for source code control tools is quite fragmented and that customers use a wide range
ot tools. So, we decided to publish our own SCM Framework, the same one we used for the SCM, CVS
and ClearCase support, in order to help users build their own extensions in a similar way to ours.
Hope this helps,
Regards,
Dominic Battiston
JDeveloper Product Management
Oracle Corp

Similar Messages

Question about Starting Eclipse with PVCS Version Manager Plugin and Flash Builder 4 plugin

I used Eclipse 3.4.2 SR2 with PVCS Version Manager plugin.
I installed Adobe Flash Builder 4 Plugin to the Eclipse.
Eclipse executed successfully at first time.
After I open *.mxml file with the Eclipse and close.
After minutes, I execute Eclipse.
But I waited 40 minutes to see Eclipse Editor screen.
Are there any problem in Adobe Flash Builder 4 Plugin?
====== If you know Korean Character, You can see below message, I hope so ========
Environment
* OS: Windows XP SP3
* Eclipse: 3.4.2 SR2
* JDK: 1.5.0
* Serena PVCS Version Manager : 8.3.0
* Adobe Flash Builder 4 Plugin
위의 환경에서 Eclipse에 Version Manager Plugin을 설치하여 사용할 때는 잘 동작 하였습니다.
하지만, Adobe Flash Builder 4 Plugin 을 설치하고 *.mxml 파일을 열어 작업한 후에 Eclipse를 Close 하였습니다.
잠시후에 다시 Eclipse를 실행하면 약 40분 정도 시간이 지나서야 Eclipse 편집창을 볼 수 있었습니다.
혹시 Adobe Flash Builder 4 Plugin 제품과 Serena PVCS Version Manager 제품이 서로 conflict 하는 것이 아닌가
의심을 하고 있습니다.
귀사에서 이런 경험이 있다면 해결 방법을 알려주시면 감사하겠습니다.
Thank's

I experimented with the latest Zend Studio 8 trials on both platforms yesterday, and it looks a little different depending on which platform you're using:
On OS X, because Zend Studio is now contained entirely within the app bundle, it's tricky navigating to the proper eclipse folder with our Plug-in Utility. As it turns out, the Zend dropins folder does exist if you look down low enough:
/Applications/Zend Studio.app/Contents/Resources/Java/dropins
When I typed that path into the Burrito Plug-in Utility manually, it found the dropins folder, and proceeded to install the link without complaint. However, the Zend dropins folder is not working properly on OS X either, as already found on Win, so it's not using the link.
On Win, Zend Studio 8 doesn't include the dropins folder in the first place, as noted earlier. Apparently, Zend doesn't have its dropins folder enabled on either Mac or Win.
To see if this problem is specific to dropin links, I downloaded the latest Orbit plugins from eclipse.org and tried adding those directly to the Zend dropins folder, instead of using a link. Zend doesn’t appear to recognize them either.
I'll check with our contact at Zend to see what happened.
-Chris

PVCS Version Manager support

I have seen that Oracle JDeveloper 10.1.3 now supports Serena Dimensions for versioning. What about Serena PVCS Version Manager 8.1? Are there any plans to integrate JDeveloper with the PVCS Version Manager?

Hello
Are you referring to Dimensions from Senera? Believe this use to be called PVCS. We are currently adding support to JDeveloper for Dimensions. We will be using Dimensions 9.0. The JDeveloper extension will be for release 10.1.3 and made available sometime after the production release of 10.1.3.
Dave

PVCS Version Manager Interface to Jdeveloper -- need help with install

Several of our developers are using Jdeveloper and we need to know how to install the PVCS Version Manager interface to JDeveloper.
I have already contacted Merant, the vendor for PVCS Version Manager and they could only confirm that the interface existed but was supported by Oracle.
I have not been able to find any documentation on installing this interface.
Can anyone supply directions or point me to someplace to look for them.
Any help you could give me would be greatly appreciated.
Ward

Hi all,
Ward - Brian is absolutely right. As I said in my first posting on this topic (above), we have
not yet developed an extension for JDeveloper to enable users to work with PVCS Version
Manager, which I believe is a specific product, rather than an interface.
This is why I'd greatly appreciate it if you could possibly provide more details of this Interface
and indeed what Oracle support for PVCS with JDeveloper Merant referred to. Please see my
first posting above for more details.
Brian - I'm sorry you do not agree with our approach of using the open published SCM Framework
to build your own extensions for using JDeveloper with other source code control tools than those
we support.
In an ideal world, we would have been able to offer support for every source code control tool on
the market with our first release of 9i JDeveloper. We were very keen to be able to achieve this and
we still plan and are currently looking into supporting more tools going forward and as many tools as
possible in the long term.
Unfortunately, we only have limited time available for each release and based on the feedback we
received, after our committment to support Oracle9i SCM, CVS and ClearCase were the most requested.
Therefore, we tried to reach a compromise to enable users to provide their own support for a specific
tool should they wish, if they did not use any of those tools supported. Indeed, our research suggests
that the market for source code control tools is quite fragmented and that customers use a wide range
ot tools. So, we decided to publish our own SCM Framework, the same one we used for the SCM, CVS
and ClearCase support, in order to help users build their own extensions in a similar way to ours.
Hope this helps,
Regards,
Dominic Battiston
JDeveloper Product Management
Oracle Corp

DNB integration with FSCM SAP Credit management

Hi,
Any body worked on or integrated DNB with FSCM SAP Credit management ? if it is please share some information /document on integration.
Thx
DD

Hi Ankur
You can integrate with DNB either online or batch mode .
.Online mode
    In this mode, a request is sent from FSCM to DNB for credit data. A response is sent by the DNB synchronously, for the request initiated from FSCM.
    Following was done to implement this. Middle ware (java based) created a web service and in FSCM we created a client proxy to consume the web service.
To initiate the request from FSCM, we called a web service method using a custom program passing the relevant information like agency name, customer name etc.
To call the web service method through the proxy, we had to pass the port name in the proxy call. The URL for the web service was configured in the port (transaction LPCONFIG). Middle ware got the request and in real time passed it to the DNB using integration technique   The DNB sent response back to Middle Ware in real time and Middle ware passed it back to FSCM using the same web service used for the request from FSCM.
. Batch mode -
In this mode, there was no request from FSCM side. Middle ware will aggregate credit data from DNB on periodic basis and dump the data as xml files in FSCM application server. A batch job (custom program) will be    scheduled in FSCM to process the xml files provided by Middle ware and update credit data from agencies in FSCM.
Thanks
Rajesh Kanamarlapudi

ESS-portal integration with Time and Travel management(HR) in R/3

Hi,
Im doing with ESS-portal configuration with Time and Travel Management in R/3,So please kindly send me Documents for integration part.I'll b so thankful if u people send me docu as soon as possible.
send me documents to [email protected]
thanks
pavi

Hi
Please go through this functional module HRMS_BIW_EXTRACT_PY1 in r/3 side to know the exact table where u r getting the data.
There are lot of tables involved in HR-payroll info types.
As far as your problem is concerned you take one employee and go to PA20 and analyse the payroll for each week or twice a month (depends up on ur client)
run the report on the payroll cube and find out exactly what u want.
Thanks
Roopa
Assign points if help full

JDeveloper Integration With CollabNet Team Forge

Dears
I would like to integrate Jdeveloper with Collabnet Team forge platform.
Is this integration currently supported. If yes are there any materials to support in configuring the integration
Best regards
Mohamed Chargui

Mohamed,
Yes Jdeveloper has been integrated with TeamForge, using CollabNet Connect; check out the following link http://www.open.collab.net/collabXchange/JDeveloper.
For peer discussions, you also may want to see http://forums.open.collab.net/ds/viewForumSummary.do?dsForumId=736
Cheers, Lothar Schubert

Lync 2013 integration with Avaya Aura Session Manager 6.3

Dear All,
we are planning to integrate Lync 2013 with Avaya Aura Session Manager 6.3 and Avaya
Communication Server 6.3.1 for one of our client.
As per the technical documentation from MS, it shows the integration with lync 2013 with Avaya aura session manager
6.3 and Communication Server 1000 (CS1K).
Please let me know is there any difference between Communication Server
1000 (CS1K) and Avaya Communication Server 6.3.1.

Hi,
From the link below of “Infrastructure qualified for Microsoft Lync”: Aura Session Manager 6.3 is supported with Lync Server 2013.
https://technet.microsoft.com/en-us/office/dn788945
Configuration Notes:
1.Media Bypass, RTCP, and History-Info were set to Enabled.
2.REFER and Session Timer were set to Disabled.
Known Limitations:
1.With Media bypass enabled in Lync, for an incoming call to Lync client that has simultaneous ring to a number with early media enabled, caller will hear ring back instead of the early media.
2.Avaya Aura communication manager does not send disconnect to PSTN via ISDN trunk while receiving SIP 603 response from Mediation server for incoming call to Lync client. Caller will hear overflow tone and call will not disconnect until caller drops the
call.
What’s more, it is better to contact IP-PBX vendor for the installation and set up as they have the complete documentation.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

CCME integration with Microsoft Business Contact Manager

Hi,
Can anyone tell me, if a CCME can be integrated with Microsoft BCM such that when a call comes in details of the client pop up, should they exist in the Business Contact Manager.
Finding exact information is like find a needle in a hay stack.
Regards
LN

Hi Swinster,
Apologize for the late reply.
What is your current situation? As JS2010 stated, also in this KB article:
http://support.microsoft.com/kb/2101557
During the 'Specialize phase' of Sysprep, Sysprep.exe looks at the Last Modified Date of the ntuser.dat file for each user profile to determine which user profile to copy to the default user profile. However, the earlier cleanup functions of sysprep.exe
loads each Ntuser.dat file to make security ID (SID)generalizations. You cannot predetermine which user profile will be copied if more than one user profile exists.
How about we skip the copyprofile option?
Further, see if the following article would help to customise the user profiles settings:
Configuring Default User Settings – Full Update for Windows 7 and Windows Server 2008 R2
http://blogs.technet.com/b/deploymentguys/archive/2009/10/29/configuring-default-user-settings-full-update-for-windows-7-and-windows-server-2008-r2.aspx
Or we may consider seek help at the office outlook forum for the BCM deployment.
Best regards
Michael Shao
TechNet Community Support

Xcelsius Integration with BPC MS version - Error

Hi
I am trying to integrate xcelsius tool with BPC MS version.i am getting below error when I try to check the configuration..can anyone help on this?
**Server Error in '/OSoft' Application.**
**Parser Error**
**Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.**
**Parser Error Message: Could not create type 'XcelsiusService.QueryResults'.**
**Source Error:**
**Line 1: <%@ WebService Language="c#" Codebehind="QueryResults.asmx.cs" Class="XcelsiusService.QueryResults" %>**
**Source File: C:\BPC\Websrvr\Web\App\XcelsiusService\QueryResults.asmx Line: 1**

The SAP BusinessObjects EPM Connector add-on file is included in the SAP BusinessObjects
Extended Analytics Analyzer Support Package setup. The setup installs Extended Analytics
Analyzer and copies the EPMConnector.xlx file in the EPMConnector sub-folder of the Extended
Analytics Analyzer installation folder.
You can find the software here:
http://service.sap.com/swdc
Installations and Upgrades - Entry by Application Group --> SAP BusinessObjects Portfolio --> SBOP Extended Analytics -- > BOBJ Extended Analytics 7.5 --> Installation
You can find the user guide here -- note that it is confusingingly found under Financial Consolidation
http://service.sap.com/instguides
SAP Business Objects --> EPM --> Financial Consolidation --> 7.5 --> SAP BO EPM Connector User Guide 7.5
http://service.sap.com/~sapdownload/011000358700001297252009E/EPMConnector75_en.pdf
More information can be found in the BPC 7.5 NW Master Guide
http://service.sap.com/~sapdownload/011000358700001106942009E/SBOP_PC_75_NW_SP03_Master.pdf
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Xcelsius integration with BPC - MS Versions - Error

Hi
I am trying to integrate xcelsius tool with BPC MS version.i am getting below error when i test teh webservice....
can anyone help on this?
Server Error in '/OSoft' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not create type 'XcelsiusService.QueryResults'.
Source Error:
Line 1: <%@ WebService Language="c#" Codebehind="QueryResults.asmx.cs" Class="XcelsiusService.QueryResults" %>
Source File: C:\BPC\Websrvr\Web\App\XcelsiusService\QueryResults.asmx Line: 1

The SAP BusinessObjects EPM Connector add-on file is included in the SAP BusinessObjects
Extended Analytics Analyzer Support Package setup. The setup installs Extended Analytics
Analyzer and copies the EPMConnector.xlx file in the EPMConnector sub-folder of the Extended
Analytics Analyzer installation folder.
You can find the software here:
http://service.sap.com/swdc
Installations and Upgrades - Entry by Application Group --> SAP BusinessObjects Portfolio --> SBOP Extended Analytics -- > BOBJ Extended Analytics 7.5 --> Installation
You can find the user guide here -- note that it is confusingingly found under Financial Consolidation
http://service.sap.com/instguides
SAP Business Objects --> EPM --> Financial Consolidation --> 7.5 --> SAP BO EPM Connector User Guide 7.5
http://service.sap.com/~sapdownload/011000358700001297252009E/EPMConnector75_en.pdf
More information can be found in the BPC 7.5 NW Master Guide
http://service.sap.com/~sapdownload/011000358700001106942009E/SBOP_PC_75_NW_SP03_Master.pdf
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Integration with Third Party Project Management Software

My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by James O'Brien ([email protected]):
My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions. <HR></BLOCKQUOTE>
James:
I've been involved on 2 projects that included integration into Projects. On both occasions Oracle's Activity Management Gateway (AMG) was used. AMG is the open interface for Projects. We used it on one occasion with Primavera Expedition to load budgets and the WBS and on another with MS Excel to upload budget information. ODBC and AMG was used on the MS Excel project.
Regards,
Robert
null

JDeveloper integration with SOA 10.1.3.4

Hi Experts,
I need to integrate the JDeveloper with SOA 10.1.3.4 version. Please let me know what version of JDeveloper I need to install and what are the steps.
Thanks for your help.
Shashi

JDev 10.1.3.4 is available here -
http://www.oracle.com/technetwork/developer-tools/jdev/downloads/soft10134-082660.html
Post your JDev related queries here -
JDeveloper and ADF
Regards,
Anuj

App-V 5 SP2 (RDS) application integration with multiple office versions - general question

So I have been testing Office 2013 with app-V 5 SP2 and the package size is a hefty 1+GB with Visio and Project thrown in and I am not convinced by the speed and efficiency of delivering office 2013 this way (shared content mode) so I am thinking of
pre-installing Office 2013 on my XenApp servers instead.
However, we have some applications that integrate with office 2007 as they are not yet certified with Office 2013. Am I right in thinking that if I package Office 2007 and add it to a connection group with the other application, then that app will use Office
2007 regardless of Office 2013 being installed on the local OS?
Thanks

Hello,
This depends on how it technically integrates with Office 2007. Without knowing, or testing, how that is done it is not possible to state which version will be used.
See this general article on howto nativelly install and use multiple versions of Office;
http://support.microsoft.com/kb/290576/en-us
I suggest you test your scenario and try to understand how your specific application interacts with Office.
Nicke Källén | The Knack| Twitter:
@Znackattack

R12 iStore integration with third party content management system

We are facing several challenges and are already a month behind for Go-Live with the iStore implementation. Hence, I wanted to check if anyone has worked on a similar setup
1. iStore being used only for cart functionality
2. All content, web pages are on a thrid party site
3. iStore's deep linking is being used for cart updates
4. We have a dmz environment and reverse proxy setup
5. Payments is integrated
We are finding several application errors, there is a loss during the back & forth communication between iStore & third party site. Could somebody please advise if there can be a better setup or if they have implemented a similar network topology.
Thanks.

Hi All,
We are also facing same issues(Application Errors) and our setups include third party website linking, DMZ configurations and Reverse Proxy setups. Unable to know the root cause for these application errors as it was intermittent.
Please help me on this.
Regards

JDeveloper integration with Serena PVCS Version Manager

Similar Messages

Maybe you are looking for