JDeveloper Issue-- Customizing iExpense Page-- Urgent

Hi Gurus,
I am new to OAF, I have gone thru tutorials and setup the environment.
I have copied all classes and mds from JAVA_TOP and AP_TOP directories to my local machine..to myclasses and myprojects.
The problem is how can I see the classes and other stuff in the JDeveloper. I have created new OA workspace and project as "AP" but still I cannot see the classes under this workspace or project.. What piece I am missing?,
Anyhelp would be appreciated.
Thanks
Ravi

Ravi,
Make sure that the project type is of OAProject. If you are using 9.0.3 Jdeveloper, you might need to add these files in your OAProject using Add files icon. If you are using 10.1.3, check if you have added the <jdevhome>/myproject in the Java Content and you do not have anything in the Excluded list (both are present under Project Content area in the Project Settings).
Regards,
Guru.

Similar Messages

How transfer custom OAF pages to Jdeveloper to Server

Hi,
i am facing the issue while opening the custom OAF pages from server which are developed by som other guy.
Please let me know how to open those custom OAF pages in Jdeveloper from server .
Regards ,
Maheswara Raju

Raju,
Refer below link for all the steps for registering the OAF page to server.
http://www.focusthread.com/apps_tutorials/oa_framework/OA_Framework_Tutorial_Deployment_in_APPS_Environment.pdf
Regards,
Gyan

Issue with messagedownload field on custom OAF page

We have a custom OAF page where we are displaying file attachments using messagedownload field.
We have a VO for this field where we are fetching the file name and file (BLOB).
For the message download field, the properties are set as:
DataType: VARCHAR2
View Instance: custom vo
View attribute: filename
File View Attribute: filedata(BLOB column)
The issue is when we have multiple files to display of the same file type like 6 pdf files, the file name is correct, but the content is correct only for the first file. The remaining 5 files also show the content of the first file though the filename is correct.
Please let us know if anyone faced similar issue and the probable solution.
Thanks in advance.
Regards,
Kiranmayi.

Check that the view object used to render the table must have a designated primary key, else download bean will download content from the first row every time.
--Sushant

Custom Master Page Issue in Intranet

Hi All,
I hope someone can assist with this, we implemented this particular SharePoint 2007 portal approximately 5 years ago. An outside consultant created this custom master page, for some reason out of nowhere we are experiencing this bizarre issue with
the master page and checking in and out documents. I have attached an image showing the error message being displayed below(couldn't attach until my account was verified but it states 'Error invalid viewstate, port 52208, user agent Mozilla/4.0..., viewstate,
referrer, path). I came across one source on the web that stated something about the search box code and it causing issues out of nowhere on the master page. So in my dev environment I made the change and removed the following code from the master
page below.
<td style="padding-top:8px;" valign=top>
            <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server">
            <SharePoint:DelegateControl runat="server" ControlId="SmallSearchInputBox"/>
            </asp:ContentPlaceHolder>
</td>
As soon as this code is removed and the page is published again everything begins to work again, the problem is I can't remove search from this intranet portal as it is heavily used. Any assistance would be greatly appreciated.

By any chance, do you still have access to the solution package in which the master page was contained? Normally, you would see another .ascx user control overriding the delegate search control in there. I'm almost positive that this custom control is
what causing this issue.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

Having issues with custom master pages and device channels

I'm working in Sharepoint 2013 and am attempting to create a custom master page that is to be used by mobile devices. I have created an html file and a custom css file that includes snippets from the design manager. The file appears to preview fine in a
browser from Microsoft Web Expression. I have loaded the html file into sharepoint via design manager, so the master file is there as well. The css files are in the style library for the site collection and I have created a device channel including user agent
strings for iphones going back to the iPhone 4 and operating systems going back to iOS 6. I have obviously assigned my custom "mobile" master for that device channel and I have turned off mobile browsing. However when I open the site on my phone
it shows the normal full desktop view and not my custom master. I will include my html code, my css and a screenshot of my device channel below. Please help!
<?xml version="1.0" encoding="utf-8"?>


<!DOCTYPE html[]>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<link href="https://otterbein.sharepoint.com/sites/Committees/Style Library/mobile_corev15.css" rel="stylesheet" type="text/css" />
<meta http-equiv="X-UA-Compatible" content="IE=10" />




<meta name="GENERATOR" content="Microsoft SharePoint" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="Expires" content="0" />









<link href="https://otterbein.sharepoint.com/sites/Committees/Style Library/mobile_corev15.css" rel="stylesheet" type="text/css" />










<link href="https://otterbein.sharepoint.com/_vti_bin/spsdisco.aspx" rel="alternate" type="text/xml" />















<link href="https://otterbein.sharepoint.com/sites/Committees/Style Library/mobile_corev15.css" rel="stylesheet" type="text/css" />
</head>
<body style="width: 330; margin-right: 0px">
<div id="ms-designer-ribbon" style="width:312px">

<div id="TurnOnAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOnAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(true);UpdateAccessibilityUI();document.getElementById('linkTurnOffAcc').focus();return false;">


</a>
</div>
<div id="TurnOffAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOffAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(false);UpdateAccessibilityUI();document.getElementById('linkTurnOnAcc').focus();return false;">


</a>
</div>


</div>



<div id="s4-workspace" style="left: 0px; top: 0px; width: 329">
<div id="s4-bodyContainer" style="width: 328">
<table style="width: 312px">
<tr>
<td style="width: 312px; background: #666666; text-align:center">
<div class="js-callout-menuAction" style="background:rgb(102, 102, 102); color:white; width:295px; padding:8px; height:64px; overflow:hidden;">In true previews of your site, the SharePoint ribbon will be here.</div></td>
</tr>
<tr>
<td style="width: 312px; background: #CB1920; text-align:center">
<img alt="Otterbein Logo" src="https://otterbein.sharepoint.com/sites/Committees/Style%20Library/otterbein-logo_towers_white_mobile.png" style="padding:5px"><br>
<div data-name="SiteTitle" style="width: 295px; color:white; padding-bottom:5px; text-indent:5px" class="ms-chkmark-container-centerer">
<span style="font-size:xx-large">Committees</span>
</div>
<div WebPartID="00000000-0000-0000-0000-000000000000" HasPers="true" id="WebPart" width="250px" class="ms-WPBody noindex " OnlyForMePart="true" allowDelete="false" style="padding-top:15px; padding-bottom:15px"><div componentid="ctl00_ctl03_csr" id="ctl00_ctl03_csr"><div id="SearchBox" name="Control"><div class="ms-srch-sb ms-srch-sb-border" id="ctl00_ctl03_csr_sboxdiv">
<input type="text" value="Search..." maxlength="2048" accessKey="S" title="Search..." id="ctl00_ctl03_csr_sbox" autocomplete="off" autocorrect="off" onkeypress="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {if (Srch.U.isEnterKey(String.fromCharCode(event.keyCode))) {$find('ctl00_ctl03_csr').search($get('ctl00_ctl03_csr_sbox').value);return Srch.U.cancelEvent(event);}})" onkeydown="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_ctl03_csr');ctl.activateDefaultQuerySuggestionBehavior();})" onfocus="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_ctl03_csr');ctl.hidePrompt();ctl.setBorder(true);})" onblur="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_ctl03_csr'); if (ctl){ ctl.showPrompt(); ctl.setBorder(false);}})" class="ms-textSmall ms-srch-sb-prompt ms-helperText" style="width: 250px; height: 18px" /><a title="Search" class="ms-srch-sb-searchLink" id="ctl00_ctl03_csr_SearchLink" onclick="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {$find('ctl00_ctl03_csr').search($get('ctl00_ctl03_csr_sbox').value);})" href="javascript: {}"><img src="/sites/Committees/_catalogs/theme/Themed/EF0ED6F1/searchresultui-61174269.themedpng?ctag=55" class="ms-srch-sb-searchImg" id="searchImg" alt="Search" /></a></div></div></div><noscript><div id="ctl00_ctl03_noscript">It looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl03" style="color:White;border-color:White;border-width:0px;border-style:Solid;text-align:center;"></div><div class="ms-clear"></div></div>
<div data-name="TopNavigationNoFlyoutWithStartNode"><span style="display:none">
<table cellpadding="4" cellspacing="0" style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow">
<tr>
<td nowrap="nowrap">
<span style="font-weight:bold">PortalSiteMapDataSource</span> - topSiteMap</td>
</tr>
<tr>
<td></td>
</tr>
</table>
</span><a name="startNavigation"></a>
<div id="zz7_TopNavigationMenu" class=" noindex ms-core-listMenu-verticalBox">
<ul id="zz9_RootAspMenu" class="root ms-core-listMenu-root static">
<li class="static">
<a class="static menu-item ms-core-listMenu-item ms-displayInline ms-navedit-linkNode" href="/sites/Committees/SitePages/Home.aspx" accesskey="1">
<span class="additional-background ms-navedit-flyoutArrow">
<span class="menu-item-text">Committees</span></span></a></li>
<li class="static ms-verticalAlignTop ms-listMenu-editLink ms-navedit-editArea">
<span class="ms-navedit-editSpan" id="zz7_TopNavigationMenu_NavMenu_Edit">
<a id="zz7_TopNavigationMenu_NavMenu_EditLinks" class="ms-navedit-editLinksText" href="#" onclick="g_QuickLaunchMenu = null; EnsureScriptParams('quicklaunch.js', 'QuickLaunchInitEditMode', 'zz7_TopNavigationMenu', 1, 0, 1, '\u002fSITES\u002fCOMMITTEES'); cancelDefault(event); return false;" title="Edit Links">
<span class="ms-displayInlineBlock">
<span class="ms-navedit-editLinksIconWrapper ms-verticalAlignMiddle">
<img class="ms-navedit-editLinksIcon" src="/sites/Committees/_catalogs/theme/Themed/EF0ED6F1/spcommon-B35BB0A9.themedpng?ctag=55" alt="Edit Links" /></span><span class="ms-metadata ms-verticalAlignMiddle">Edit Links</span></span></a><span id="zz7_TopNavigationMenu_NavMenu_Loading" class="ms-navedit-menuLoading ms-hide"><a id="zz7_TopNavigationMenu_NavMenu_GearsLink" href="#" onclick="HideGears(); return false;" title="This animation indicates the operation is in progress. Click to remove this animated image."><img id="zz7_TopNavigationMenu_NavMenu_GearsImage" src="/_layouts/15/images/loadingcirclests16.gif?rev=38" alt="This animation indicates the operation is in progress. Click to remove this animated image." /></a></span><div id="zz7_TopNavigationMenu_NavMenu_ErrorMsg" class="ms-navedit-errorMsg">
</div>
</span></li>
</ul>
</div>

</div>
<br>
</td>
</tr>
<tr>
<td style="width: 312px">
<div class="DefaultContentBlock" style="border:medium black solid; background:yellow; color:black;">
This area will be filled in by content you create in your page layouts.
</div>
</td>
</tr>
<tr>
<td style="width: 312px; background:#CCCCCC"><div class="ms-webpart-chrome ms-webpart-chrome-fullWidth "><div WebPartID="00000000-0000-0000-0000-000000000000" HasPers="true" id="WebPart" width="312px" class="ms-WPBody noindex " OnlyForMePart="true" allowDelete="false" style=""><div class="ms-rtestate-field"></div></div></div></td>
</tr>
</table>
</div>
</div>
</body>
</html>
User agent strings for mobile Channel
Apple-iPhone3C1/1001.403
Apple-iPhone3C3/1001.403
Apple-iPhone4C1/1001.403
Apple-iPhone5C1/1001.405
Apple-iPhone5C2/1001.405
Apple-iPhone2C1/1001.523

Hi,
The issue is likely not your HTML Master Page but your user agent string. Try a user agent string of just "iphone". To test your master page, you could also set the user agent to "MSIE", which should cause this master page to load for
any version of IE. This will help you debug the master page as well in your normal browser.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Custom Master Page issue with Document Set Libraries

Details: Publishing site using SharePoint 2013. The SharePoint is on my company's servers.
Have a custom Master page that has a navigation banner (built with HTML/CSS/javascript). The site has it applied successfully to the "Site Master Page" but when I also apply it to the "System Master Page", the libraries that have
Document Set type content do not show the files within. We'd like to be successful in applying to the "System Master Page" as that allows the banner to show when an actual library is accessed. Any suggestions, please?

Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
Thanks again,
Steven

Custom master page issue only some pages not all (spwebpart manager)

Hi i am using html custom master page in sharepoint 2013, In my search page (home) working properly without any issue,
But in my Result.aspx page showing below error.
A WebPartZone can only exist on a page which contains a SPWebPartManager. The SPWebPartManager must be placed before any WebPartZones on the page.
How to solve this? Thanks in advance

There are 4 web parts in this page
1.Refinement
2.Search Box
3.Search Navigation
4.Search Results

Custom master page issue in subsites

Greetings!
I've run into an oddity with a custom master page on my SharePoint 2013 Enterprise server. I copied the html for the seattle master page, renamed it so it wouldn't change the seattle master, made an addition to it to add a reference to a custom css
file, then threw it back up on the site so SP would make a new .master file with it. I created a new web app and site collection, put the custom css file in the Style Library and added the custom master page to the Master Pages.
So, all that being done, I changed the look of the top level site to use the new master page and it looks great and seems to be working as expected. We've got a number of subsites planned for underneath this top level site, I'm thinking no problem, just
put the custom master file in the master pages and we'll be good. So I create a subsite, put the custom master page in the subsite's Master Pages, change the look. The master page and custom css apply and it looks good, but, then the problem starts.
When I go into a document library and change a view or add a view or delete a view I get back an odd response page from SP. In the url I see this: https://topsite/subsite/_vti_bin/owssvr.dll?CS=65001
and in the body of the message: 69|pageRedirect|owssvr|https://topsite/subsite/Shared%20Documents/Forms/AllItems.aspx|
When I go back into the subsite, whatever change I was attempting when I get these results worked fine.
So, why does my custom master page work fine on the top level, but not on the subsites? If I switch the subsite back to the Seattle.master, the oddity goes away, so that tells me it's something to do with my custom master page and/or custom css. I did
some searching for owssvr.dll?CS=65001 and didn't see anything that helped. I checked IIS and the web.config file and don't have ASP.net tracing on that I could find.
All that the custom css is doing is increasing the size allowable for the site icon (.ms-siteicon-img) to allow for a larger icon (180px square) and it pushes the side Nav Box down a bit to make room for the larger icon and changes the font size for the
side Nave Box (#sideNavBox). Since it works on the top site, I'm not suspecting the css, but, it's not making sense to me why the custom master page wouldn't work in subsites either.
I ran into this issue earlier, it was showing up when deleting folders from the document library. I thought I'd made a boo-boo somewhere in creating the custom master page, or how I'd added it, or something (kind of a learn as I go situation here), so I
deleted the entire web app and recreated it, hoping for a clean start and a good master page and everything would be good. Guess I'm still missing something.
I swear that the ONLY change I made to the seattle html file for my custom page was to add this line just below the corev15.css line: 
So, that's my sad story. Any suggestions, other than to punt on the custom master page?
Thanks!
Steven

Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
Thanks again,
Steven

Very urgent Decimal issue in ADF page

Hello friends,
i have an issue in ADF page which was weight field, issue has below.
1) weight filed was validated that without entering 5 digit value in filed, example suppose i enter 12345 in weight it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but it is let me to go next field and submit button. it is happening only in create page only.
2)but when i go to detail page , same weight fild is populated there - i enter invalid weight something 12345, it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but here let me not go to another filed until i ENTER valid value.
create page weight filed need to work same as detail page.i am new to ADF development, how to check where this validation done and how to fix this.
very very urgent.
Thanks,
vamshi.

If you use ADF BC, open the entity and choose "Business Rules". You can then add validation rules such as range limits under the attributes. It is usually best practice to include validation rules in the entity (model layer), this way they apply automatically to all view objects based on the entity and you are guaranteed to have only valid values in the database. (View layer validation may have its place as a convenience supplement.)
Read more about business rules in the developer's guide: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcvalidation.htm

Customized OAF page -- Duplicates Issue

Hi All,
We have a customized OAF page which allows user to perform the below operations,
1. Query for records
2. Add a new row
3. Save the changes
Issue is 3 of the fields in the page are of unique combination. We perform the validation to ensure unique values only get stored, if user tries to enter an value combination which already exists then system throws an error. But when user enters valid records and save it, the previously entered wrong data also gets stored to database.
I have explained the scenario below, Item id/global code/local code are the unique combination fields
1. User enters below values
ITEM ID GLOBALCode LocalCode Desc
IT123 100 100 T1
Saved successfully.
2. User now enters below values
ITEM ID GLOBALCode LocalCode Desc
IT123 100 100 T2
When tries to save, get error message as Combination already exist. If i search for item id IT123 and Global code 100 it shows only 1 row
3. User now enters below values
ITEM ID GLOBALCode LocalCode Desc
IT123 100 101 T3
Saves the data successfully. But if i search for item id IT123 and global code 100 i am getting 3 rows as below,
ITEM ID GLOBALCode LocalCode Desc
IT123 100 100 T1
IT123 100 100 T2
IT123 100 101 T3
Errored out record in step 2 also got inserted. Please assist if any of you have faced similar issue else provide some pointers in resolving the issue.
Thanks,
Rajesh SM.

Rajesh,
Issue is 3 of the fields in the page are of unique combination. We perform the validation to ensure unique values only get stored,
if user tries to enter an value combination which already exists then system throws an error. But when user enters valid records
and save it, the previously entered wrong data also gets stored to database.what all the steps or code u wrote to check the combination already exists or not. Post the method u have written to check the same.
Regards,
Gyan

Having issues setting custom 404 page...

Hey all,
I'm not sure if I'm missing a step, I created a custom 404 page ("404.html") and it's in the root of the website folder. Under Websites (tab) > Server Website, I click Advanced Settings and set the custom error page to "/404.html", yet entering, say, website.com/abc, still brings me to the generic Apache 404 page.
I also tried specifying the 404 page as "/404" and "404.html", and I tried adding it to the index file list.. No dice.
I'm sure I could do it manually via the .htaccess file, but before I do that (and before I inquire about doing that), I want to make sure I'm doing everything I should be doing through the Server App.
Any ideas?

Okay, I ended up creating and using a .htaccess file to override Apache's default settings, since I had issues saving changes to the .conf files in Library/Server/Web/Config/apache2, it's very locked down, and for good reason of course.
For those with the same issue,
0.5) In OS X Server app's Website settings, click "Advanced Settings" and check the "allow overrides using .htaccess files" box.
1) Create a new document in your favorite text editor. I used TextWrangler, free from the App Store.
2) Copy the text
ErrorDocument 404 /pathtofile
and change /pathtofile to the path to your custom 404 page, which can be HTML or PHP.
3) Save the file as ".htaccess" ideally into the root of your website folder directly, because the dot at the beginning makes it hidden, so you can't save it to the desktop and move it later (unless you show hidden files via that Terminal command)
4) Done! You don't have to restart Apache or OS X Server or OS X for the change to take effect, just go to yoursite.com/someRandomURLthatDoesn'tExist and watch the magic.
Courtesy of http://askubuntu.com/questions/53199/custom-apache-404-page and Google.

Issues in the How To "Build custom popup pages" document

I followed the How-To document: "Build custom popup pages".
It worked well with non-special-character data.
But when I tested ename = KING's, the JavaScript could not handle this ename.
I believe other special characters will have similar problems.
Any suggestion for handling special characters in custom popup LOV pages?

You can use PageURL tag. This is part of the render tag lib. In fact,
the skeleton JSPs for page tabs use this tag to create links.
Xin Wu wrote:
In the portal application, I know I can build a book with multiple pages. These pages can be arranged with some orders. And each page can be navigated by clicking its tab.
But my question is that if those tabs are disabled, how can i navigate from one page to another one? For example, can i add a next button on a page, and the next button is pointed to the next page? Since I want to have capability to build these page sequences dynamically, I don't want to use java page flow.
Thank you for your help!

How to Build Custom JSP Page to bypass Oracle Apps Login

Hi All,
Can some one guide me how to develop a custom jsp page to bypass Oracle Apps R12 Login.
Actually Our requirement is some external user will enter the login details in some third party login page with the third party generated username and passwrod, that user's credentials are mapped to oracle system,so as soon as they enter credentials having validated it has to redirect that external user to Oracle Apps R12 Home Page, where responsibilities are shown. Currently that third Party login page is set to redirect to RF.jsp but that is not working and throws this error:
"You are trying to access a page that is no longer active.
- The referring page may have come from a previous session.Please select Home to Proceed"
So I am planning to build a custom jsp page to resolve the error.
As soon as user enter credentials in the third party login page, it will be redirected to my custom login page which in turn redirect external user to Oracle Apps R12 Home Page, where responsibilities are shown. Is it possible? If yes what JSP Page/Servlet I have to invoke from custom JSP Page and what all URL parameters or session parameters and cookies parameter I have to pass or set.
Can anybody please help me...
Its very urgent. We are running short of time. Its a sev 1 issue.
Please reply soon.
Thanks,
Raja Dutta

Hi,
Thanks for the update.
Sir its not about calling the JSP Page from OAF page.
My requirement is what I have explained above.
Please suggest its urgent.
Thanks,
Raja Dutta

SharePoint Foundation 2013 - FBA Custom Login Page

Hi,
     i am trying to enable FBA in SharePoint Foundation 2013 and it works fine for default login page
     but when i try to create custom login page ( which is already working without any problems in SharePoint 2010 ) i receive an error when i try to authenticate user using the following code :
         SPClaimsUtility.AuthenticateFormsUser(Context.Request.UrlReferrer, txtUserName.Text, txtPassword.Text);
     i checked the Log file and found the following entries :
        - Application error when access /_layouts/CM Custom Login Page/Login.aspx, Error=Exception of type 'System.ArgumentException' was thrown. Parameter name: httpApplication   at Microsoft.SharePoint.IdentityModel.SPClaimsUtility.AuthenticateFormsUser(Uri
context, String userName, String password)     at CM_Custom_Login_Page.Layouts.CmCustomLoginPage.Login.btnLogin_Click(Object sender, EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
        - System.ArgumentException: Exception of type 'System.ArgumentException' was thrown. Parameter name: httpApplication    at Microsoft.SharePoint.IdentityModel.SPClaimsUtility.AuthenticateFormsUser(Uri
context, String userName, String password)     at CM_Custom_Login_Page.Layouts.CmCustomLoginPage.Login.btnLogin_Click(Object sender, EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
      - Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ArgumentException: Exception of type 'System.ArgumentException'
was thrown. Parameter name: httpApplication     at Microsoft.SharePoint.IdentityModel.SPClaimsUtility.AuthenticateFormsUser(Uri context, String userName, String password)     at CM_Custom_Login_Page.Layouts.CmCustomLoginPage.Login.btnLogin_Click(Object
sender, EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(...
      - ...Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

check first whether you are getting context or not, to me it looks like issue with Contrext.Request.UrlReferrer
try with this code
Uri url = new Uri(SPContext.Current.Web.Url);SPClaimsUtility.AuthenticateFormsUser(url, txtUserName.Text, txtPassword.Text);

Stale Data error when invoking seeded OAF from a custom OAF page

Hi All,
We have a requirement in OAF where we have to open a Seeded OAF Page (Install Base) from our Custom Page. We are using the javascript function “openWindow()” to open the page in a new window. When we close the seeded page by clicking seeded page window using the Window-close button and then perform any event on the custom page, we get the Stale Data error as given below.
Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
Cause:
The number of displayed records, 2, exceeds the actual number of records, 1, in view object OwqAM.IKNCICOWQDetailVO1. Some of the displayed records may have been deleted.
Here is the part of code we have tried.
String destination = "/OA_HTML/RF.jsp?function_id="+Func_Id+"&"+"resp_id="+Resp_id+"&"+"resp_appl_id="+Application_id+"&security_group_id=0&lang_code=US";
String testDest = "javascript:openWindow(top,'"+destination+"',null,{width:750, height:550},false,'document',null);void(0);";
OABodyBean bodyBean = (OABodyBean)pageContext.getRootWebBean();
bodyBean.setOnLoad(testDest);
Also this issue is encountered only when we open an OAF page in a new window. We also have a functionality where a JSP page is opened on similar lines, but above said navigations do not result in the same error.
If anyone has come across such a issue and have a resolution, please let me know. Any pointers would be of great help.
Thanks,
Mrugesh

Hi,
We had tried passing RetainAM = Y and then bouncing apache. Still we were getting the same error.
We are not facing the STALE DATA issue when we invoke JSP page and oracle forms. It is only when we launch a seeded OAF page from our custom OAF page that we are getting this error.
Regards,
Mrugesh

JDeveloper Issue-- Customizing iExpense Page-- Urgent

Similar Messages

Maybe you are looking for