Jdeveloper problem with webstarterapp2

Hi all;
I tried to setup a single development machine using webstarterapp2. I have Oracle CM SDK and Application Server installed on another machine. Following the readme from Oracle, I did everything required.
When I start the webstarterapp2 on my development machine, the logon page appears. I logon using system/password user. However, the following error message is displayed on the index.jsp:
IFS-20103: Unable to get sessions
Checking the log file, I also found the following error lines. What could be missing?
Please help.
05/02/26 19:58:59 Started
05/02/26 19:59:01 TAV-DYS-webapp: JDevOJSP: init
05/02/26 19:59:01 TAV-DYS-webapp: Version: 1.0 LOGGING: init
05/02/26 19:59:02 TAV-DYS-webapp: Version: 1.0 LOGGING: Debugging is on
05/02/26 19:59:02 TAV-DYS-webapp: Version: 1.0 LOGGING: [WebStarterAppServlet 1] init() called.
05/02/26 19:59:02 TAV-DYS-webapp: Version: 1.0 LOGGING: [WebStarterAppServlet 1] standalone mode.
05/02/26 19:59:02 TAV-DYS-webapp: LOGGING: Unable to start service: WebStarterAppServer
oracle.ifs.common.IfsException: IFS-20102: Unable to start service (WebStarterAppServer)
oracle.ifs.common.IfsException: IFS-20010: Unable to get service configuration properties (null)
oracle.ifs.common.IfsException: IFS-20010: Unable to get service configuration properties (SmallServiceConfiguration)
oracle.ifs.common.IfsException: IFS-20012: Invalid service configuration name (SmallServiceConfiguration)
     at oracle.ifs.common.IfsException.<init>(IfsException.java:300)
     at oracle.ifs.beans.LibraryService.getServiceConfigurationProperties(LibraryService.java:732)
     at oracle.ifs.beans.LibraryService.getServiceConfigurationProperties(LibraryService.java:503)
     at oracle.ifs.beans.LibraryService.startService(LibraryService.java:366)
     at common.StandaloneIfsServer.<init>(StandaloneIfsServer.java:35)
     at view.WebStarterAppServlet.init(WebStarterAppServlet.java:181)
     at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2094)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4523)
     at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4617)
     at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:765)
     at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:497)
     at com.evermind.server.Application.getHttpApplication(Application.java:886)
     at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:688)
     at com.evermind.server.http.HttpSite.getApplication(HttpSite.java:420)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:422)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
05/02/26 19:59:02 TAV-DYS-webapp: 9.0.4.0.0 Started
05/02/26 19:59:11 TAV-DYS-webapp: Version: 1.0 LOGGING: LogonAction: FileAction: executeAction() entered
05/02/26 19:59:11 TAV-DYS-webapp: Version: 1.0 LOGGING: LogonAction: logon the user saving database session in logonBean
05/02/26 19:59:11 TAV-DYS-webapp: Version: 1.0 LOGGING: [LogonAction] Exception:
oracle.ifs.common.IfsException: IFS-20103: Unable to get sessions
     at oracle.ifs.common.IfsException.<init>(IfsException.java:344)
     at model.LogonBean.connect(LogonBean.java:92)
     at view.LogonAction.doAction(LogonAction.java:77)
     at view.FileAction.executeAction(FileAction.java:97)
     at view.FileAction.execute(FileAction.java:57)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at view.WebStarterAppServlet.process(WebStarterAppServlet.java:246)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)

Probably an issue with the JRE used by JDev. on Win 2k. Have you tried 3.2x? I haven't seen that type of issue with it on Win 2k.

Similar Messages

JDeveloper Problem with GUI

Hi All,
I'm running JDev 3.1 on Win2000, and I'm having a bit of a problem with redraws of the GUI.
When I click anywhere on the JDev GUI and trigger and action that involves a GUI redraw the little piece of the GUI under the mouse pointer graphic is not redrawn. It does not effect the functionality but it is annoying and will make the other developers I work with less keen about using it.
Does anyone else have this problem? Is it a JDev or Win2k problem?
Cheers
d

Probably an issue with the JRE used by JDev. on Win 2k. Have you tried 3.2x? I haven't seen that type of issue with it on Win 2k.

JDeveloper problem with actions

Hello
I'm working on my first struts application and I have any problem with actions(I think).
When I run the application, I don't see any data from DB on my page but when I click any of these 4 buttons, then the data load from DB.....Can anybody help me....I want to see my data when the page loads for the first time, not after the button click. Thanks a lot.
(The buttons shows the rows of the table....first,previous,next,last)
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
<html:form action="/zuctzaz.do" >
<table width="100%" height="100%" border="0" cellpadding="0" cellspacing="0">
<input type="hidden" name="<c:out value='${bindings.statetokenid}'/>" value="<c:out value='${bindings.statetoken}'/>" >
<tr>
<td>
<table>
<tr>
<td>
<table>
<tr>
<td><input type="submit" name="event_First" value="First" STYLE="width:35px" <c:out value="${bindings.First.enabledString}" /> ></td>
<td><input type="submit" name="event_Previous" value="Prev" STYLE="width:35px" <c:out value="${bindings.Previous.enabledString}" /> ></td>
<td><input type="submit" name="event_Next" value="Next" STYLE="width:35px" <c:out value="${bindings.Next.enabledString}" /> ></td>
<td><input type="submit" name="event_Last" value="Last" STYLE="width:35px" <c:out value="${bindings.Last.enabledString}" /> ></td>
</tr>
</table>
</td>
<td>
<table>
<tr>
<td colspan="3"><strong>Z�čtovac� z�znam</strong></td>
</tr>
<tr>
<td>Date</td>
<td><input type="text" name="textfield1" value="<c:out value="${bindings['datZuct']}"/>"></td>
<td><c:out value="${bindings['cisPdo']}"/> AND <c:out value="${bindings['zucZazn']}"/></td>
</tr>
<tr>
<td>Place</td>
<td colspan="2">Brusel</td>
</tr>
</table>
</td>
</tr>
</table>
</td>
</tr>
</table>
</html:form>

Hy Again!
I forgot to say one more thing that could be relevant:
If i add any action from the struts-config.xml in the provider for the <defaultAction> of the portlet it works correctly.
So the actions work correctly, the problem is that when sending back to the oracle portal the request with the new action, there is no response.
Pls help!
Thanx, and best regards!
Ado

JDeveloper - problems with Tutorial for Java EE Developers

Hi,
I am trying to start learning Oracle J2EE technologies, and I am using the Oracle "Tutorial for Java EE Developers (10.1.3.1.0)" listed in the Oracle Application Server 10g (10.1.3) page: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/index.html.
I am having problems in chapter 2, at the creating EJB 3.0 Persistence Entities stage, when using the Create Entities from Tables Wizard. Basically, when I select all the tables from the SRDEMO schema and attempt to create the Java classes, only the first table objects are created - ExpertiseAreas.java and ExpertiseAreasPK.java. I do not get any error messages, so I am not sure why the other table objects are not created.
If I then use the Wizard to select tables individually, the objects are created. However, they appear to be missing some details - specifically the @OneToMany annotation.
Has anyone encountered this same issue, or are there any known issues with this tutorial.
I am using version 10.1.3.4 of JDeveloper, on a 10g (10.2) XE database. I installed the version of JDeveloper without JDK included. I have a Sun Java EE 5 SDK Udate 5 (JDK 6u7) install of JDK.
Thanks,
Fraser

Please refer
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_ejb_30/ejb_30.htm
http://www.oracle.com/technology/tech/java/oc4j/ejb3/howtos/howtoejb30mappingannotations/doc/how-to-ejb30-mapping-annotations.html#onetomany

JDeveloper problem with CMP

Using JDeveloper 903, I receive the following error when
attempting to run a container-managed EJB:
SQL error: Io exception: The Network Adapter could not establish the connection
However, the connection is fine according to the Connection wizard: clicking "Test Connection" gives "success!".
I can also view database tables through the System Navigator Connection view. The problem seems to be the embedded oc4j server's inability to open a database connection for CMP.
How to fix this?
-T. Sorgo
[email protected]

Hi Yuval,
Yes, this is standard default behaviour for OC4J!
Let me guess -- you're using the JDeveloper deployment wizard, right?
Bad move, buddy! Gee, wouldn't it be great if the JDeveloper wizards
actually worked properly (sigh).
Easiest thing to do is to edit the "orion-ejb-jar.xml" file immediately
after deployment. Look for the "entity-deployment" element, and change
the "table" attribute so that it equals the correct name of your table.
Of-course, personally, I steer well clear of the wizards, because I
don't know what they're doing but I'm sure it's not something that I
want them to do.
I also suggest you check out the documentation from either:
http://www.atlassian.com
or
http://www.orionserver.com
Good Luck,
Avi.

Jdeveloper - Problem with undo/redo

Hi,
I am facing a problem while using the Undo/Redo option in jdeveloper. When i press the CTRL+Z(undo) option for a lengthy changes, the CTRL+Y(redo) option is not working properly.
- Shankar S

In my experience of JDev, The correct keyboard shortcut for redo is Shift + Ctrl + Z .
Ctrl + Y deletes the current line.
I don't know if that can be changed.
Remi

Jdeveloper problem with the dataBase view

Hi all
hope your fine
i have toad database and jdeveloper 10g installed on our
machine. i connect our database in jdeveloper by using new
database connection wizard.and the test connection give success ..
the problem is i can see all the tables and views data but the views that i have access to view from another schema i can see in toad but not in jdeveolper ?!!
so why is it ?

Check if you have a filter defined on your database connection.
If you can upgrade to 11g, then you'll find the other users on the "Other Users" section of the database browser.

Problem with Application build in JDeveloper 11.1.5 to WLS 10.3.5

Hi to everyone, I have a problem with a application build in JDeveloper 11.1.5 and deployed to a standalone WLS 10.3.5 ( with the JRF template appliied , to run adf applications )
When I try access to the page : localhost:7001/myApp , it show me :
"Error 403 Fordbbiben ".
but when I put :
localhost:7001/myApp/index.jspx, it show me :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and the log is :
<May 8, 2012 9:06:22 PM BOT> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <BEA-000000> <
java.lang.IllegalStateException: The expression "#{bindings.genRegion.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "genRegion_dlg") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.genRegion}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "null". Now using an empty RegionModel instead.
at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
What can I do to fix the problem ??
Thanks

Analyzing the problem, I created a new ADF application with only a web page (index.jspx) , and deploy it to the WLS, and I access to URL of page and it runs !! ( http:localhost:7001/myApp/faces/index.jspx ).
But, when I ADD A TASK FLOW to the application and deploy to the WLS newly , and try to access to the URL application's ( http:localhost:7001/myApp/faces/index.jspx ) . It show me again :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and the log is :
<May 10, 2012 19:02:57 PM BOT> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <BEA-000000> <
java.lang.IllegalStateException: The expression "#{bindings.genRegion.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "genRegion_dlg") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.genRegion}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "null". Now using an empty RegionModel instead.
at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
Why it show me that error when I ADD a Task Flow to the Application ???
Can Anyone help me please ?? I m varios days with this problem. Thanks

Problem with adding Sun JSF RI v1.2 as a new library in JDeveloper 10.1.3.1

Hi,
I have a problem with adding a latest JSF 1.2 RI from Sun (https://javaserverfaces.dev.java.net/files/documents/1866/44998/jsf-1_2_03.zip) to JDeveloper as a new library.
I created a new User library and added into it jsf-impl.jar and jsf-api.jar from JSF 1.2 RI.
Then I try to create two new JSP Tag libraries based from .tld files.
When a .tld file is placed in "TLD File:" field there is no information below about Library Version and Required JSP Version. If I check "Execute Tags in JSP Visual Editor" and click "Customize" button - list of tags in "Customize Tag Library" window is empty.
I have errors when I try to use JSF Tags from this new library in JSP page like :
"Can't create tag instance: f:view (class: null). Make sure, that the tag class or a library contained this class is available in this application"
(free translation to English)
Is this possible to add JSF RI v1.2 as another library in Jdeveloper 10.1.3.1 ?
thanks for help
koli

Hi,
This solution is not exactly for Jdeveloper 10.1.3.x I think.
- "Create a JSF system library." section, point 2. - there is not possible to add library in folder other than User I see, so I added it in User folder.
- "Register the JSF JSP tag libraries." section, point 5. - in JD 10.1.3 there is no dialog box, I checked checkbox "Show Tag Library in Palette". A new library was added to User folder but there is no new libraries in component Palette.
Even as I use "Edit tag libraries .." from Component Palette context menu and add manually new tag libraries to selected, there is no libraries in Component Palette after it.
I feel so problem is with different .tld files format, not with adding libraries method.
Sun RI tld file (from version 1.2_03) fragment:
<taglib xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-jsptaglibrary_2_1.xsd"
version="2.1">

<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
<tlib-version>1.2</tlib-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
tld included in JD:
<!DOCTYPE taglib
PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN"
"http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>

<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
Did JDeveloper 10.1.3.x maintain with taglib version 1.2 ?
Regards
koli

JDeveloper 10g video problems with Windows Vista

Hi,
I'm using JDev 10g 10.1.3.3 over Windows Vista with Aero active. Since I started using Vista, I have always had problems with JDev. First, the fonts in the JDev panels would mess up and the scrolling would not work well. I made some changes in the way JDev uses the JDK, I don't remember exactly what I did, but I think I made the whole JDev environment to use a newer JDK, which is not engouraged/supported by Oracle. Since then, the scrolling problem was solved. But When I run my app, Aero stops working.
Is there a way to make JDev 10g work perfectly with Vista?
(No, I'm not willing to migrate to 11g, for several reasons, so I need to stick to 10g for now).
Thanks!
Brian
Edited by: BrianBraun on Nov 12, 2008 7:08 AM

Try the various tips on this thread:
Using JDeveloper on Vista - some tips

Problem with jdeveloper

Hello, i'm a newbie trying to learn developing ADF applications using JDeveloper 11. I'm currently following the tutorial :
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
19. In the Application Navigator Right-click AppModel and select Run to invoke the application module tester. This is a small Swing based application that allows you to test the ADF Business Components you have just created.
I have the problem with this step... When i Run the AppModel nothing happens... The process starts in the run manager but the program does not actually run... Does it have to do with the dafault run target?
Thnks

Well, by default, if you click the "Run" button from the toolbar with no active file in the editor, it will attempt to run the Default Run Target for the current project, and if there is not one set, JDev will prompt you for one. I'm sure you can complete the tutorial without completing that step, but if I were you, at some point, I'd have a go at the business components tester. I use it all the time to make sure my model works - and it's a good debugging tool when something isn't working and you're not sure if its the UI part or the model part - you can test the model independently.
Good luck,
John

JDeveloper 9i - Problem with using tag lib

I am having problem with building my project, using JDeveloper 9i.
My project includes custom tag libraries.
When I build my project, I get back the following error:
Error(1): oracle.xml.parser.v2.XMLParseException: Invalid element 'servlet' in content of 'web-app', expected elements '[error-page, taglib, resource-ref, security-constraint, login-config, security-role, env-entry, ejb-ref]'
for every jsp file that has the taglib directive as follows:
<%@ taglib prefix="srp" uri="/srpTagLib" %>
Please note that the application runs OK, but it can not be build by JDeveloper for debugging purpose.
Any ideas? Please help!!!!
Thanks,
Cathy

What version is your tag library and what version is your deployment descriptor?

Problems with Template JDeveloper 11g

Hi! I have problems with template in Jdeveloper 11g.
I had created jspx page from templeate:
<?xml version='1.0' encoding='windows-1257'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1257"/>
<f:view>
<af:document>
<af:form>
<af:pageTemplate viewId="/augiTemplate.jspx">
<f:facet name="mainArea"/>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>
THERE are error:
JSF page template at path /augiTemplate.jspx requires a model binding!!!
Why it is so an what it means? Pleas help!
Best regards!

Hi,
it means that your template has an ADF binding (PageDef) reference. When you create a page in the JSF page dialog and assign the template then the binding reference is created for you. You should see a bulb in the page source editor. Press it an it should create the missing binding for you
Frank

Problems with integracao of the JDeveloper with Software Configuration Management (S

1) Error with JDeveloper 9i and Software Configutarion Management (SCM)
I have a problem with the JDeveloper 9i integrated with the repositorio 6i (SCM). When I make checkout of a
source in java of the repositorio, after that I make the alteration and later I make checkin of this source,
some times occur an error of feed of checkin or occurs error of checkout in case that it obtains to
make checkin.
2) Error when I open one branch and later that the alteration was finished I want to finish this branch.
when beginning one branch to tabalhar and I make alterations in a source in java, and to the end I want to
finish this branch, appear a message informing that some source in state of checkout exists, but when I go to
verify in the stack of checkout, do not exist no source or to folder.
Somebody could help me?
In case that it has the solution or it passed for these experiences?

Hi Uwe :-)
We know, that we have to raise the parameter PROCESSES to solve our problem (for a while). But we want to solve and understand the problem once for all.
And we noticed, that the processes raise everytime, we open a web-page in the visual editor in the JDeveloper. And we want to know, if anyone knows why. Or should we have forgot to set any parameter. Maybe its a bug of the JDeveloper version, we are unsing.
I just have found the error, that occurs in JDev.
Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler foundMaybe this is helpfully? :-/
Regards
Majo
Edited by: DerMajo on 09.11.2009 07:49

Problems with use cases in JDeveloper 11.1.1.1.0

Use cases made with JDeveloper 11.1.1.0.2 can not be used and edited in JDeveloper 11.1.1.1.0.
Same problems with Use Case Diagrams.
And it seems to be impossible to create new use cases in JDeveloper 11.1.1.1.0.
What are the differences between 11.1.1.0.2 and 11.1.1.1.0 if you look at use cases??

In JDeveloper 11.1.1.0.2 each use case has one file with the folllowing name: *.xhtml_usc.
In JDeveloper 11.1.1.1.0 each use case has two files with a names like *.xhtml_usc and *.uml_usc (after standard migration with JDeveloper). I can still edit the *.xhtml_usc files, but I have no idea what to do with the *.uml_usc files. I can only open a Property-editor, but the properties I see have no relation with the text I used in my original use cases . New use cases only have a *.uml_usc file and a Property-editor. In javadoc the new use case does not appear.
My question is: why do I have two different use case files in JDeveloper 11.1.1.0 and how can I use the Property editor??

Jdeveloper problem with webstarterapp2

Similar Messages

Maybe you are looking for