JDeveloper Runtime Errors

JDeveloper 3.2.3 on Windows 2000
I'm getting the following error within JDeveloper with almost any action I perform(Ex. Opening Project Properties, Trying to expand the Wizard Menu, Opening a file, etc)...
"Cannot assign a nil to a _TStringList"
I'm assuming a reinstall is going to be my best bet? Would this be a correct assumption?
What procedures should I follow to reinstall? (Uninstall then Install, Install over the top?)
Any Help would be greatly appreciated...
Thanks
Bret

Similar Messages

New runtime error JBO-27014 appears by upgrating JDv 9.0.2.289 to 9.0.3.1035

Without changing the application source, after the upgrade from Upgrade from JDeveloper 9.0.2.289 to 9.0.3.1035 we are receiving the runtime error code:
oracle.jbo.AttrValException: JBO-27014: Attribute AtyId in Appointmenttypes is required
at oracle.jbo.server.JboMandatoryAttributesValidator.validateMandatoryAttributes(JboMandatoryAttributesValidator.java:115)
at oracle.jbo.server.JboMandatoryAttributesValidator.vetoableChange(JboMandatoryAttributesValidator.java:163)at oracle.jbo.server.EntityDefImpl.validate(EntityDefImpl.java:1719)
at oracle.jbo.server.EntityImpl.validateEntity(EntityImpl.java:1115)
at oracle.jbo.server.EntityImpl.validate(EntityImpl.java:1297)
at oracle.jbo.server.DBTransactionImpl.validate(DBTransactionImpl.java:3261)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1516)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:1693)
at oracle.jbo.html.jsp.datatags.CommitTag.doStartTag(CommitTag.java:45)
at jsp_servlet.__appointment_add_proc._jspService(__appointment_add_proc.java:498)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:304)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The AtyId is defined as surrogate key. sequence number
It is strange. This field is a defined DBSequence number and should be automaticaly incremented each new record.
At the "old" version it was working and with the upgrade, not more.
Should one new parameter be defined to have it running again?
Thanks

A bug 2535331 was reported for this issue:
The bug was in 902 that BC4J did not enforce null checks for domains properly. In 903 it does and that leads to validation failure in DBSequence case as in this case, the DB value for the domain is null as database generates the right value for new entities. To fix that when you open/close the Entity-editor it re-establishes the domain settings on the attribute leading it to be non-mandatory.
In JDev 903, Entity editor should not allow DBSequence domains to be "checked" as "Mandatory"
A known workaround is to visit all such entities that have DBSequence attribute marked as mandatory and open/finish editor so that attribute properties for the DBsequence attribute is regenerated and the wizard takes off the mandatory setting.
You may say that the migration/upgrade process should have 'fixed' this and we missed that boat on this issue.

B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParseException: Start of root element expected.

Dear All,
I am a beginner to Oracle B2B.
I have created an agreement to Recieve 852, Product Activity data(POS) from one of the Trading partner. This is an inbound process.
A SOA composite application is created to Recieve the data and insert into perticular columns of the database table using database adapter.
I have tested the Interface with some couple of file and it went perfect without any error. Now I have to test the interface with some other files.
This time also I am not getting any error in Business Message, Wire message and Application message but the composite application is not picked.
The log file shows : B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParserException: Start of root element expected.
Please let me know if anyone has faced this issue. it will be of great help.
Thanks,
Abhas Kushwaha

Hello,
Just a thought, When I had the similar problem, it appeared to be a BOM (Byte order mark - Wikipedia, the free encyclopedia) in the xml file, which is the very first character in the xml file, so the file was not identified to be a valid xml file. Removing the BOM from the xml file fixed my problem, however, I did not spend much time in fixing using B2B, the vendor (sender of the file) fixed the file and started sending without BOM. So my work was easier.
The character is not visible in all XML editors, however, it was visible in JDeveloper. I used a tool to identify and remove during testing until the vendor fixed the file, the tool is called file bom detector,http://www.bryntyounce.com/filebomdetector.htm
Hope this helps,
Thanks,
Venkatesh

JAXB Runtime Error

have generated the java files using jaxb (jwsdp1.6) from schema. I am using Jdeveloper 10.1.3. It throws a runtime error which is as follows:
[-] 2006-04-24 17:12:10,617 ERROR ProcessBatchEJB::getBatchJob - Provider com.sun.xml.bind.ContextFactory_1_0_1 could not be instantiated: java.lang.ClassCastException
06/04/24 17:12:10 java.lang.ClassCastException
06/04/24 17:12:10 at com.sun.xml.bind.ContextFactory_1_0_1.createContext(ContextFactory_1_0_1.java:50)
Any ideas??

Make sure that you have put the jar files from Sun's implementation before the version that is embedded in JDeveloper. The ClassCastException may be occuring once you have created a new object instance using Oracle's factory and try to use it with Sun's implementation classes.
Hope this helps,
Eric

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situat
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the cur
    screen.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT
SourceCde
              message e001(zm) WITH text-335 ltab-kunnr text-334.
            else.
              if ktab-jkunnr <> ltab-kunnr.
                ktab-jkunnr = ltab-kunnr.
                jobsitecode = ltab-kunnr.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input = jobsitecode
                  IMPORTING
                  output = jobsitecode.
                SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                IF sy-subrc = 0.
                  ktab-jname1 = kna1-name1.
                  ktab-jstras = kna1-stras.
                ENDIF.
                chg_flg = 'X'.
              endif.
            endif.
          else.
            message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
*          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
*            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
*          endif.
          custcode1 = ktab-ckunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = custcode1
            IMPORTING
              output = custcode1.
          jobsitecode1 = ktab-jkunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = jobsitecode1
            IMPORTING
              output = jobsitecode1.
          SELECT SINGLE * FROM knvp
          WHERE kunnr = custcode1
            AND vkorg = vbak-vkorg
            AND vtweg = vbak-vtweg
            AND spart = vbak-spart
            AND parvw = 'WE'
Error analysis
    The program attempted to issue a " " message during "Exit Command"
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"

Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the current
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
How to correct the error
    The program must be modified to correct the error.
    The modification must be made in "Exit Command" processing.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
Source Code Extract
Line SourceCde
    1 *---------------------------------------------------------------------*
    2 *       FORM YVBEP_LESEN                                              *
    3 *---------------------------------------------------------------------*
    4 *       Lesen der Tabelle YVBEP (nicht sortiert)                      *
    5 *---------------------------------------------------------------------*
    6 FORM YVBEP_LESEN USING US_POSNR
    7                        US_ETENR
    8               CHANGING CH_TABIX.
    9
   10   YVBEP = SPACE.
   11   YVBEP-MANDT = VBAK-MANDT.
   12   YVBEP-VBELN = VBAK-VBELN.
   13   YVBEP-POSNR = US_POSNR.
   14   YVBEP-ETENR = US_ETENR.
   15   READ TABLE YVBEP.
   16   IF SY-SUBRC > 0.
   17     MESSAGE E506 WITH US_POSNR US_ETENR.
   18   ENDIF.
>>>>>   CH_TABIX = SY-TABIX.
   20
   21 ENDFORM.
Could you please help on this issue.
Thanks
Srinu

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

Portal runtime error while selecting page layout in WPC editor

Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
Thanks

Hello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau

Runtime Error when installing Adobe Creative Suite 5.5 Production Premium

I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Runtime Error in ALV Tree Output

Dear All, I am trying to create a ALV Tree using Class cl_gui_alv_tree. The Report Shows the Output with the first Node but when i try to expand it is dumping with a runtime error GETWA_NOT_ASSIGNED in class CL_ALV_TREE_BASE and method SET_ITEMS_FOR_COLUMN. The Reason being the data which was copied in the initial node display to mt_outtab is getting refreshed.
Can any one of you help me the reason for the table getting refreshed. Do i need to pass any data.
I am doing the following steps.
1. Create Container,
2. Create Tree Class object
3. Generate the Field Catalog.
4. Set table for first display " With empty internal table
5. Generate the Hierarchy
6. Call the Method Frontend Update.
Let me know if i had missed any steps in the process.
Thank you,
Regards,
Swaroop Patri

One reason for getting this error is using local defined tables for it_outtab parameter in the below code:
To get rid of the dump, define two distinct output tables globally: one is an empty table which you will pass to the below method, other one is your real output table whose size increases dependently.
CALL METHOD go_tree->set_table_for_first_display
      EXPORTING
        is_hierarchy_header = ls_hier_header
      CHANGING
        it_outtab           = gt_data_e "Empty table
        it_fieldcatalog     = gt_fcat_tree.

Runtime error in LSMW to create Material Master

Hi all,
I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
"A RAISE statement in the program "SAPLMG25" raised the exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
I have checked all the steps of lsmw. Any idea why this specific error is coming?

Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.

JDeveloper Runtime Errors

Similar Messages

Maybe you are looking for