JDeveloper: Select in Navigator Alt-Home

Hi all
I often have the case to edit files in different projects and applications within a single JDev instance. Sometimes it happens that I edit a similarly named file and do not immediatelly see to which project it belongs. In eclipse it is possible to enable a feature, which updates the project navigator with the currently opened file, is this also possible with JDev or each time I have to use Alt-Home?
Thanks in advance.

There is not automatic navigation to the right project (AFAIK), you have to use alt-home.
Timo

Similar Messages

  • Select in Navigator - wrong focus in 11g

    Hi, when I use "Select in Navigator" Atl+Home in JDev 11.1.1.0.2., appropriate class is correctly found and marked in navigator panel.
    But focus is NOT on navigator panel but in combobox with projects: so I can not simple scroll in navigator panel with arrows as in previous version JDev 10.1.3.
    Is this a bug or requiered feature?
    Thanks for answer,
    Jara

    Hi Jara,
    just playing with this feature in JDev 11.1.1.1.0 and also 10.1.3.3.0 but I getting focus only in project navigator in both. so I think it just navigates to the file - also in older versions
    regards,
    Branislav

  • Selection tool in Illustrator is inconsistent! Shift select to add, alt select to deselect!

    Selection tool seems to be a popular topic in the feature request forums, but I didn't find anyone complaining about exactly the same thing I am going to suggest.
    If I want to select a bunch of points with the Direct selection tool I usually drag a marquee to start selecting, but often am not able to select all the points I want in one move, so I have to shift drag to select additional points. This is when the annyoing thing happens. Points that are previously selected becomes deselected if I drag over them again, while points that where not selected becomes selected. This is confusing and feels quite messy. The inconsistency I am talking about happens when I use the lasso tool instead. Now I can deselect with Alt and add to selection with Shift (good behaviour!) This is also the way it works in Photoshop.
    Shift select to add, alt select to deselect! This should be the behaviour for all selection tools in all Adobe programs! It would be much more consistent with Photoshop as well. Right now using the alt-modifier with the Direct selection tool gives you the group select tool instead, so that would have to change. Maybe you can add an option for this old behavour in preferences for lecacy reasons...
    If this option is somehow possible allready then I might be missing something, but I didn't find anything like that in preferences.
    Best regards,
    Markus S.

    Make sure Object Selection by Path Only is turned off. 
    If that does not help, reset your preferences.

  • TP4 / offline database / select in navigator failed

    Select in navigator from pl/sql editor failed to find the edited object into the navigator (from where it was opened).

    I just opened a pl/sql from offline database navigator.
    Do some edits in the editor. Save many times. Compile many times.
    Suddenly (no idea why), the context menu Select in navigator don't find the object anymore.
    This is only for package body. I don't have this problem with package specification.
    Same package body may be accessed without any problem at same time through outgoing subversion pending changes.
    The error message is PackageName was not found in Navigator.
    The window title bar context is correct.
    I have more than one schema in my navigator.
    I have two application workspaces and both have same project names.
    I have subversion to manage both workspaces.
    Hope this help.

  • 11g p2 / bug - select in navigator from database offline object editor

    It is no more possible to use the context menu "Select in Navigator" from the database offline object editor (a package body in my case). I got a message "Command not handled".
    This appear in all my packages and body.
    After restarting JDev and test again I got this message "Error encountered:
    The Offline Database file is missing. Please recreate Offline Database "1" with the correct settings.
    This object in file ADMINPROCTABLE.type will be unavailable."
    Is it a way to correct this ?

    I completely reinstall JDev and set it to use subversion ... that resolve the problem and i'm no more in a position to reproduce it.

  • Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though.  I've reset the Apple TV and the modem. No change. help?

    Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though.  I've reset the Apple TV and the modem. No change. Any ideas what the problem is?

    Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating
              http://support.apple.com/kb/TS4526

  • Is there anyone having an issue with the apple tv when selecting music from the home screen?

    Is there anyone in the community having an issue playing music from the home screen of the apple tv? When selecting the music app my apple tv restarts. If anyone else is having the same issue and has corrected the problem please share the solution.

    Working fine here, and have not seen any other reports. I would restore your unit
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • Check authorization after selection in navigation bar

    Hi,
    there is a standard entry in the navigation bar "Create service ticket" that calls the view set SrvTViewSet for creation of service tickets. The viewset contains of four standard view areas, SrvtHead, SrvtBus, SrvtPartner, SrvtSLA. We have not modified the views themselves, only the IMPL- class for the SrvtHead since we have modfied methods in the class. The problem occurs when the user do not have the right authorization to create service tickets at all (after she has selected Create service ticket in the navigation bar), then an error message is created saying "Wrong authorization" but the four screens also dumps with message cx_sf_ref_is initial or an exemption has occurred in cx_bsp_element_exception.
    First I tried to take care of the authorization check myself in each view of the four but then I thougt that this would not be the correct solution. Instead the user would get an error message when she selects "Create service ticket" in the navigation bar and an error message would appear before showing the Create service ticket view at all. Is this possible? There is two authorization objects created but the standard does not seem to work regarding the authorization check.
    Is there anyone having any ideas?
    Thank you and goodbye,
    Lena

    I think what you can do is , replace the Controller for the Navbar view CL_CRM_IC_NAVBARVIEW with your own Custom Class ( do a controller replacement in the Framework Profile )
    Then Redefine the Method PROCESS_NAVIGATION_REQUEST
    Inside this method , you can check what is the current Nav Link Clicked , if it is 'Create Service Ticket' , perform the Authorization check or whatever you want and if it not successful , raise a Error Message using below Code and have a RETURN statement . 
    data : lv_msgsrv type ref to cl_bsp_wd_message_service.
    lv_msgsrv =  cl_bsp_wd_message_service=>get_instance( ).
    lv_msgsrv->add_message( ..... ) .

  • Error when selecting detailed navigation menu item

    Hi,
    Usually on selection of a menu item from detailed navigation an iview appears which contains values from an R/3 system, but now when i select any item for the detailed navigation i get a download pop up window
    which  ask me to save the page. When i press the save button the download stops.
    Is this a problem with the SAP GUI ? please give me a solution ?
    Regards
    Christina Dove

    hi
    GUI Properties
    Description -
    > New ECC 6.0
    AppServer -
    > here application Server
    SysID       -
    > here System ID
    System Number -
    >
    SAP System  ---> R/3

  • DataGrid, selecting, highlighting, navigating to a row

    In Flash MX 2004
    I would like to have a row selected after the DataGrid has
    been populated.
    Much like a list box <select> in html, I would like to
    make one row
    "selected". It must be navigated to and highlighted to
    visually indicate the
    selection.
    However, the focusedCell property does not work when
    dg.editable=false
    So, I set the dg.editable=true, set the focusedCell to the
    appropriate row
    and cell then set the dg.editable=false. But this left the
    chosen cell in an
    editable (textbox) state that you would have to click out of
    in order to see
    all the contents of that cell. Ugly.
    With the fine suggestion of DMennenoh, I used the
    .selectedIndex property to
    choose the selected row, but, although the item is in fact
    selected, the
    datagrid does not navigate to the selected field. It stays on
    the first row.
    You must scroll through the list to see the selected row.
    Is there a way to progarmmatically choose and navigate to a
    row in a
    DataGrid without this effect?
    Julian

    myDG.setSelected(0)
    "stjulian" <[email protected]> wrote
    in message
    news:e7pnao$ilo$[email protected]..
    > In Flash MX 2004
    >
    > I would like to have a row selected after the DataGrid
    has been populated.
    > Much like a list box <select> in html, I would
    like to make one row
    > "selected". It must be navigated to and highlighted to
    visually indicate
    > the
    > selection.
    >
    > However, the focusedCell property does not work when
    dg.editable=false
    >
    > So, I set the dg.editable=true, set the focusedCell to
    the appropriate row
    > and cell then set the dg.editable=false. But this left
    the chosen cell in
    > an
    > editable (textbox) state that you would have to click
    out of in order to
    > see
    > all the contents of that cell. Ugly.
    >
    > With the fine suggestion of DMennenoh, I used the
    .selectedIndex property
    > to
    > choose the selected row, but, although the item is in
    fact selected, the
    > datagrid does not navigate to the selected field. It
    stays on the first
    > row.
    > You must scroll through the list to see the selected
    row.
    >
    > Is there a way to progarmmatically choose and navigate
    to a row in a
    > DataGrid without this effect?
    >
    >
    > Julian
    >
    >

  • Turning ADF Security on fails navigation from home page to taskflows

    When my applications starts, it shows login page where user enters credentials, and if it is correct, it takes user to home page. My home page contains navigations through commandLinks to different bounded taskflows. When i click one of the commandLink, nothing happens. All these navigations are running perfectly when i disable security. Any though on this. I have also shown only those links which are allowable to logged in user using this:
    rendered="#{securityContext.taskflowViewable
    ['/WEB-INF/taskflows/maintain_stocks_tf.xml#maintain_stocks_tf']}"
    So when i gives grants to user, it is shown visible but navigation does not work which perfectly works without security.

    just to debug check if it return true or false..
    <af:outputText value="#{securityContext.taskflowViewable['/WEB-INF/taskflows/maintain_stocks_tf.xml#maintain_stocks_tf']}"

  • Selection-screen navigation process required immeidately

    Hi all,
    I am having a program, if i execute that we will have 3 radio butons like basic data,
    financial data, tax related data of the customers. when i select one of the radio buton and execute one selecion screen 500  will be displayed. selection screen 500 is common for all the radio buttons but based on the radio button some of the fields will be disabled.
    what my problem is when i select one radio button and gave values in the selection screen , for the valid values it will display the data in the grid format. and i come back to the selection screen ,I have a situation where if the valid value is entered and there is no corresponding value for that selection i need to go back to the same selecion screen and a message should be displayed.
    HOW TO HANDLE THIS?
    Thanks,
    Nagaraju.

    The following is the code....
    SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
    PARAMETER: P_BWAF0 RADIOBUTTON GROUP RAD1 DEFAULT 'X'
                                            USER-COMMAND PC,
               P_BWAF1 RADIOBUTTON GROUP RAD1.
    SELECTION-SCREEN END OF BLOCK BLK1.
    *C-- Period range
    SELECTION-SCREEN: BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-002.
    SELECT-OPTIONS: S_DATE FOR SY-DATUM MODIF ID PER.
    SELECTION-SCREEN: END OF BLOCK BLK2.
    AT SELECTION-SCREEN OUTPUT.
      PERFORM SCREEN_INITIALIZE.
    *&      Form  screen_initialize
          text
    FORM SCREEN_INITIALIZE .
      IF P_BWAF0 EQ 'X'.
        W_SSCRFIELDS-UCOMM = SPACE.
      ELSE.
        W_SSCRFIELDS = 'RAD1'.
      ENDIF.
      LOOP AT SCREEN.
        IF W_SSCRFIELDS-UCOMM EQ 'RAD1'.
          IF SCREEN-GROUP1 = 'PER'.
            CLEAR: S_DATE.
            SCREEN-ACTIVE = 1.
          ENDIF.
        ELSE.
          IF SCREEN-GROUP1 = 'PER'.
            CLEAR: S_DATE.
            SCREEN-ACTIVE = 0.
          ENDIF.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDFORM.                    " screen_initialize

  • JDeveloper : Problem while navigating from one to another page.......

    Hi,
    I am using JDeveloper 11.1.1.4.0.
    Assume that Eo name : EmployeesEO. I want to display all employees those who r all under coreesponding Department. For that i have created ViewCriteria Named as EmployeeByDepartment for DepartmentId in EmployeesVO. where clause in Viewcriteria is:
    *( (Employees.DEPARTMENT_ID = :Departmentid ) )* .
    Then exposed that viewCriteria in AM for EmployeesVO Instance.
    Now i created taskFlow where I created two jsff page. In page 1 just i drag and drop EmployeeByDepartment viewcriteria from datacontrol [DataControl->EmployeesVO1->NamedCriteria]. Then i drag and drop EmployeesVO1 from Datacontrol to Page 2 as ADF Form.
    Now while clicking Search Button in page 1 it should navigate to Page 2 and also it should display Employee details those who r all under same Department.
    How can i achieve??
    Regards,
    Praveen.

    First question: which component do you use (af:query or anything else)?
    next question if you use af:query why not show the result on the same page (query with table)?
    Timo

  • "Elegant" template - Select header / navigation bar colour ??

    Hey all,
    I'm currently working on an iWeb website for my wedding. We chose the "Elegant" template (the one where you have different coloured headers for different page templates).
    Since our colours are some kind of retro brown and pink, I would like to have the pink header on every page (that includes the top header and the pic behind the navigation menu). However, iweb forces me to use a certain coloured header based on a new page. Since I didn't want to mess with the iweb interface, I decided to publish my website on a folder on my harddrive, overwrite the coloured hearders files with the pink version, using the same name (as a consequence, I have a pink header named "xxxxxyellowtop.png" and "xxxxxxyellowbottom.png for example). Thus, the website displays the right colour on every page. I then use a FTP app to publish it on the internet.
    When I update the content of a page then publish the website on my harddrive again, it keeps the header files I modified, so that works very well. However, on some updates (I guess when I make a change to the navigation menu), iWeb overwrites the modified header file and I have to do the same operation all over again.
    Is there anyway for me to have that pink header on every page of my website, without having to do some trickery ?

    That's the problem with most of the templates, they can't be modified easily or at all. However, there is some code that you can add to change the color of the navbar area. Don't know if it will do what you want but you can certainly try. You have to publish the changes before the color change can be seen.
    See this demo page: Change Navbar Text and Background Color. And guess who gave us the code? Wyodor.
    OT

  • Difficulty navigating apples home page

    I have been going to the apple home page to look aaaaaat new products. However, I find that when I try to scroll or click anything on the page there is a very ;long lag--5 to 10 seconds in response. It is driving me insane . The whole page loads almost instantly but doing anything on the page is a nightmare. I have another pc laptop -windows 7 OS and when I go to the apple page everything works instantly. Does anyonehave any insights as to what might be going wrong on my other pc? The pc with an issue has an inbtel quad core processor , 2.6 ghz, 4gb of ram so speed shouldn't be ab issue. Thanks.

    carl43m wrote:
    The pc with an issue has an inbtel quad core processor , 2.6 ghz, 4gb of ram so speed shouldn't be ab issue.
    Perhaps it is loaded up with viruses, spyware, and other malware. I tried to clean up a PC once that had similar specs and it ran like an old 386sx. The malware was so deeply embedded that the network wouldn't function at all unless I put a few of them back. I installed Firefox and told the owner to use that instead of IE.

Maybe you are looking for