JDeveloper shows a fatal error when create Database or UML Diagrams

My Platform is Windows 7 x64 with JDeveloper 11.1.2.3
JDeveloper shows an error when I do this:
1) Create a new Database Diagram.
2) Create a Table in this Database Diagram.
3) Delete the Database Diagram.
4) Try to create a new Database Diagram again.
5) JDeveloper shows a Fatal Error, and the ADF Model Project still to be corrupt after restart JDeveloper.
The same happens with UML diagrams.
Do you know any solution for that?
Best Regards,

I found the reason of this error.
This error happens, if you store your ADF Application Project in a Network Drive, if you store your projects in local drives all works fine.
Regards,

Similar Messages

Error when creating database

when installing 9i server i couldn't create database and after installation i tried to create database using DBCA but same errors occured.
it says null sid name error=2. and then says tns protocol problem.
what should i do?

Kim Gabrielsen (guest) wrote:
: Hi,
: I have tried to install O8 on Linux several times but all have
: failed. I follow the doc written by Tom Bissett which I find
very
: informative on this subject.
: I have the correct env setting, have created oracle user as
: member of the dba group and the install program runs nicely
until
: it starts to create the database. It stops with an error
message.
: The log files look like this (excerpts):
: CRDBORCL.LST
: ORA-06413: Connection not open.
: LCC-00161: Message 161 not found; product=SVRMGR; facility=MGR
: ORA-06413: Connection not open.
: create database "ORCL"
: ORA-03114: not connected to ORACLE
: ORA-06413: Connection not open.
: which is the same results I see if I invoke svrmgr manually
: and tries to connect as 'internal'. BTW srvmgr prompts me for a
: password even though I'm logged on as 'Oracle' which is a
member
: of DBA.
: INSTALL.LOG
: - Entering database actions section.
: - Creating initORCL.ora file
: - Creating crdb2ORCL.sql database catalog and file
creation
: script
: - ERROR: The 'CREATE DATABASE' statement for the ORCL
: database failed.
: egrep failed to find 'ORA-' error in the file:
: /u01/app/oracle/admin/ORCL/create/crdbORCL.lst
: I hope someone can help 'cause I'm stock here...
: Best regards
: Kim Gabrielsen
If you followed the instructions on setting the shared memory
parameters you may have a problem.
In the 'shmparam.h' file set SHMMAX to something smaller than 4G.
I just set mine to 2G or 0x7FFFFFFF and now it works fine.
I have done the Oracle 8.0.5 installation twice now on 2
different machines with success(1 Compaq Proliant 1500 -
RH5.2/2.0.36 kernel and 1 GW2K - RH5.2/2.2.1 kernel) I ran into
several problems along the way but all problems were solvable.
Mark
null

Syntax error when creating database

Not sure if this is the correct forum, but here goes..
Using a sample at:
Technet Link
I get a "Syntax error near GO" when I try to execute the following SQL Command.
USE master
GO
CREATE DATABASE testdb
ON
( NAME = testdb,
FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\testdb.mdf' )
GO
I am using a function to create this database. It is a temporary database that gets recreated or altered frequently.
The code checks for SQL Server, gets it's version number in order to use the default SQL Server path. If SQL Server isn't available, ACE / OLEDB is used to create and manage the database (this part works fine).
The code used to check for and create the database follows.
private Boolean CheckForSQLServer()
SqlConnection cnx = null;
Int32 dbExists = 1;
SqlCommand sql;
String SSData = String.Empty;
// Check for SQL Server. If it exists, use it.
String login = UserPrincipal.Current.UserPrincipalName;
login = login.Substring(0, login.IndexOf("@"));
try {
cnx = new SqlConnection(
String.Format("server={0};user={1};Trusted_Connection=Yes;", Prop.SQLConnection, login));
cnx.Open();
hasSQLServer = true;
} catch (Exception) {
hasSQLServer = false;
return true;
if (hasSQLServer) {
try {
String ServerVersion = cnx.ServerVersion;
String SSPath = String.Format(@"C:\Program Files\Microsoft SQL Server\MSSQL{0}.MSSQLSERVER\MSSQL\DATA\",
ServerVersion.Substring(0, ServerVersion.IndexOf('.')));
SSData = String.Format(
"USE master\nGO\nCREATE DATABASE {0}\nON\n( NAME = '{1}',\nFILENAME = '{2}{1}.mdf' )\nGO",
Prop.SQLDBName, Prop.SQLDBName, SSPath);
String s = String.Format(
"SELECT COUNT(*) FROM (SELECT DB_ID('{0}') AS DbID) t WHERE DbID IS NOT NULL", Prop.SQLDBName);
sql = new SqlCommand(s, cnx);
SqlDataReader sr = sql.ExecuteReader();
if (sr.Read())
dbExists = (Int32)sr[0];
sr.Close();
} catch (Exception) { }
if (dbExists == 0) {
try {
sql = new SqlCommand(SSData, cnx);
sql.ExecuteNonQuery();
} catch (Exception) { }
} else {
try {
sql = new SqlCommand(String.Format("drop database {0};", Prop.SQLDBName), cnx);
sql.ExecuteNonQuery();
sql = new SqlCommand(SSData, cnx);
sql.ExecuteNonQuery();
} catch (Exception) { }
cnx.Close();
return false;
Comparing the generated SQL string to sample E at the link above shows them to be identical except for the database name and file pathname, but the paths do exist although the files do not.
The SQL Exception occurs at the first
sql = new SqlCommand(SSData, cnx);
statement in the code. I would think this can be done as a single string even though a .sql file is referenced in the article.
Andy

Works correctly in SQL Server 2014 Management Studio:
USE master
GO
CREATE DATABASE testdb
ON
( NAME = testdb,
FILENAME = 'F:\temp\testdb.mdf' )
GO
DROP DATABASE testdb
GO
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Error when creating database after oracle 8.1.6 is installed.

Hi,
I used Redhat 6.1 and installed Oracle 8.1.6. I think the oracle software is installed successfully. However, when I attempted to create the database by Database Configuration Assistant, I got an error message when I click on 'start' button.
The message is ORA-01031: insufficient privileges and ORA-01012: not logged.
How can I solve the problem to create my first database?
Thanks a lot.
Regards,
Tony

Make sure svrmgrl still works.
To startup a database, you must login as oracle, and oracle must also be a member of the dba group.
Also, make sure you set the following environment variables: $ORACLE_HOME, $ORACLE_SID.
Good Luck!
null

Error when creating database instance

Hi,
When trying to install R3 4.7, I came to a error while system creating tablespaces. The log is as follows.
TRACE      [iaxxcwalker.cpp:296]
           CDomWalker::processStep()
Executing installation step SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseServer|ind|ind|ora|ind|ind|0|DatabaseServerOra|ind|ind|ora|ind|ind|0|TablespacesAndRollbacksegments|ind|ind|ora|ind|ind|0|DatabaseTablespaces|ind|ind|ora|ind|ind|0|OraDatabaseTablespaces2|ind|ind|ind|ind|ind|0|checkFreeDiskSpace
TRACE      [iaxxgenimp.cpp:775]
           showDialog()
waiting for an answer from gui
Is it a problem of disk space? I have 90G.I think it is enough for 470. How should I proceed?
Thanks and regards,
Larry

Hi Beck,
Thanks for your reply. I have solved this issue myself. But I come into another issue that during R/3 database reload, system terminate with a message "File SAPSSEXC.012 is missing."
It is very strange cause I only have SAPSSEXC.011 in my folder /51030584_4/EXPORT4/DATA/. Do you have this file?
Thanks and regards,
Larry

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Publish to portal error when creating a iview

hi gurus,
I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
Error:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
Regards

yes i have used that tool,,,i am getting below error.
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
RED
The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
I have checked everything,,but still geting red lights
Regards

Error when creating the form in Salary Statement of ESS

Dear All,
We are implementing ESS and MSS,
when i try to select ESS>Benfits and Payment>Salary statement, it shows the error as com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form.
We have configured ADS in our ERP system as per the ADS config guide.
Landscape is, NW04s ,ECC5.0 integration, corresponding ESS and MSS versions.
Complete Error is:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
 at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
 at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:495)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:366)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:454)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:350)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:264)
 at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:243)
 at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
 at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:196)
 at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:256)
 at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:217)
 at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:238)
 at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
 at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
 at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
 at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
your input will be appreciated,
please do the needful.
Regards,
Sireesha.

hi Sandip
I clear the temporary files, but the error persist.
I think so, my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
thanks for your post and helps,
Ivan

"Error When Creating the form" in "Salary Statement"-Benefits and Payments

hi
When I enter the option "Salary Statement" (in "Benefits and Payment") shows me the error "Error When Creating the form"
http://img571.imageshack.us/img571/9986/payroll1.jpg (in "Salary Statement")
http://img153.imageshack.us/img153/3007/payroll2.jpg (My Error - "Error When Creating the form")
but, my sap system has Payroll customized, check it entered this tcode RPCEDTE0 I also put the appropriate values to obtain a good result.
http://img716.imageshack.us/img716/2544/payroll5.jpg (screen RPCEDTE0)
http://img541.imageshack.us/img541/1593/payroll6.jpg (result RPCEDTE0, Remuneration Statement correctly)
What I must customize addition to Payroll(back-end) to run this option of "Salary Statement"?
I hope for posts and helps,
Ivan

hi Sandip
I clear the temporary files, but the error persist.
I think so, my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
thanks for your post and helps,
Ivan

Problem when creating Database:

There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

JDeveloper shows a fatal error when create Database or UML Diagrams

Similar Messages

Maybe you are looking for