JDeveloper unable to connect to public UDDI

I am facing problem connecting to public UDDI registries like IBM and Microsoft. My PC is behind a Proxy and I have entered the IP address and port in JDevelopers Preferences dialog. The error I get is that the response is text/html instead of text/xml
Since the PC is behind a proxy, the proxy will ask for a ID/Password and then only it will connect to UDDI. I think this is what is causing the error. Please suggest solution. The error message I get is:
Testing connection with proxy 172.17.1.11:80...
Contacting http://otn.oracle.com/uddiapi/inquiry...
Unsupported response content type "text/html", must be: "text/xml".
The inquiry endpoint could not be contacted. Test failed.

Please refer to
http://www.oracle.com/technology/tech/webservices/htdocs/uddi/jdevuddi.html
Unsupported response content type "text/html", must be: "text/xml".
Is response content type set to text/html? Set the response content type to text/xml.

Similar Messages

Javascript probe - unable to connect to public WLA...

Hi
I have been unable to connect to a public Wi-Fi access point (such as BT Openzone) using my 5330 smartphone.
The phone locates and connects but before I get a log-in page a "Javascript probe" starts running and the page never loads. BT Openzone say it is because Java is not enabled on my smartphone but as far as I can see, it is. Can anyone help?
I have no problems connecting to my own wireless router using the access key with the phone.
Thanks

Get Handywi from Ovi store - set up account details ([email protected], password) - job done

Unable to connect to public wifi

My college wifi earlier used proxy settings and it worked just fine on my ipad mini but they recently removed the proxy and now my ipad mini recognises the network buton selecting it...a pop up comes saying "Unable to connect to SRM-MS" where SRM - MS is my networks name...i saw the settings on my friends iphone n did the same but still no luck..

Hi Dredd27,
I'm not sure why its not connecting, but here's what I try when iPads aren't connecting to our school's wireless network:
On the iPad, turn the WiFi off and back on again. Go to Settings -> WiFi. Turn the switch to Off. Wait a few seconds. Turn it back on. Try connecting to the WiFi network again.
Restart the iPad. Press and hold the Wake/Sleep button until you see the red slider button. Slide to power off. Wait a few seconds. Press and release the Wake/Sleep button to power it back on again. Once it powers back up, try connecting to WiFi again.
Try reseting the iPad (different from restarting). Hold down on both the Sleep and Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding both buttons until the Apple Logo appears. When you see the Apple logo on the black screen, let go of both buttons. Once it powers back up, try connecting to WiFi again.
Try resetting the network connections on your iPad. General -> Reset -> Reset Network Settings.
Hope this helps!
~Joe

Why am I unable to connect to Public WiFi HotSpots?

My MacBook Pro (late 2010), refuses to connect to most Public WiFi networks. However, my iPhone has no issues. Typically, I will be in a coffee shop or airport lounge. I'll take out my iPhone and launch Safari. Safari will try for a second or two to connect, and then a "Login" page will pop up. Usually it is simply a request to accept the Terms & Conditions for the access provider. Tick the "I Accept" box and continue. Same location, using my MBP, I launch Safari and Safari tries to connect and does nothing. Spinning Beach Ball. I do not get the "Accept" page with the Terms & Conditions. Sounds to me like a Security or "Re direct" Issue. Any ideas why this works with the iPhone and not the MBP? This is a chronic problem for me and I'm getting tired of it. Thanks for any assistance.

Thanks for the suggestion. What you suggest is not the issue. Network Preferences says Airport is Connected and I have an IP Address. Safari picks up the redirect URL but will not display the page. Workaround is to launch another browser, (I use Firefox). Then the Login Page displays correctly. Once logged in using Firefox, I can then launch Safari and all is good. This technique works most of the time. However, there are some sites where the same problem happens with Firefox or any other browser I try. Workaround is to restart in Bootcamp (Windows 7 & IE). This is just not right! I don't seem to be getting many responses so this is likely not a wide spread issue and may perhaps be due to something peculiar to my system.

JDeveloper - Unable to connect to database : ORA-00604, ORA-02248

Dear All,
We have integrated our source control tool with Jdeveloper. It is a perl script. To check in a file to the source control repository, we are invoking this perl script. When we select CVS as the versioning scheme, under Preferences->Versioning->CVS, we can select an external script to be run instead of cvs binary directly.
The perl script will connect to a database (It use DBI perl modules to connect) during its execution and it works fine if we run from command line.
But, when the same script is called from Jdeveloper, It reports the following error.
<quote>
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION (DBD ERROR: OCISessionBegin)
</quote>
Additional Details
Jdeveloper : (Installed in 2.4.21-37.ELsmp #1 SMP Wed Sep 7 13:28:55 EDT 2005 i686 i686 i386 GNU/Linux)
Studio Edition Version 11.1.1.0.0
Build JDEVADF_MAIN.DROP3_GENERIC_070626.1122.4560
Oracle Home : ( Installed in Red Hat Enterprise Linux AS release 3 (Taroon Update 7) Kernel 2.4.21-40.ELhugemem on an i686 )
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production With the Partitioning, OLAP and Data Mining options.
NLS_LANG : american_america.utf8
I would very much appreciate any kind of suggestions/direction which would guide me to resolve this issue.
If you need any further details, please feel free to contact me.
Thanks in advance.

Can you send me the script?
rgds
susan

Unable to connect to Public (Internet)

I recently install BM38 and now I can not access anything outside my
privite network. I can not even aaping my plulic address from my
workstations. I do not have any idea what I net to configure.

You definitely need to do some reading on how BorderManager works.
BorderManager is a firewall, and as such it installs packet filtering.
The filter defaults block all outbound and inbound traffic, except
certain application which then must use the proxies. If you want to
allow additional non-proxy traffic, you would have to create your own
filter exceptions. (Which is easy, once you know how).
You took the hardest possible way I can think of to disable filtering.
A much simpler way would be to go to INETCFG, Protocols, TCPIP, and
disable Filter Support near the bottom of the menu.
Have a look at the URL below.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Macbook pro wifi security won't let me connect to public/login networks

I recently purchased a new Macbook Pro retina switching from Windows to Mac. One very frustrating thing I have found is that I am unable to connect to public wifi spots such as AT&T in Barnes and Noble. I read that a security udpate requires that the mac "phone" an Ip address at apple.com to inquire about the hotspot certificate in order to determine its legitimacy. The problem is I can't gain network access until I agree to the login/authentication page for the public network. Does anyone know a work around/way to connect to these public wifi spots? I get that security is important but it is very annoying not to be able to use wifi in places like Barnes and Nobles and Starbucks.

I recently purchased a new Macbook Pro retina switching from Windows to Mac.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Unable to connect to database when running from JDeveloper

Hi all,
When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
Rep-501 : Unable to connect to the specified database.
I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
GPGWL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = GPGWL)
)

Hi,
this question is best answered on the Reports forum
Reports
Frank

Unable to connect on a public wifi...[iPhone 4S]

Hello,
I got a little problem with my iPhone 4S 16go.
When i'm on 3G, I'm unable to connect on a public wifi that uses a pop-up to go trough an internet page to connect.
Normally, a pop-up opens automaticly with the commercial page where I need to click to connect. In fact, this pop-up is appearing but it stays white ... The only way it worked for connecting to wifi is when I turn off the 3G but there is surely a solution !
I count on you !

At a shopping center , but that's a commercial wifi that disconnect everytime when I put my cellphone on stanby mode. The connect, we need to go trough a site where we need to click to connect..

Unable to Connect to DB Server Error while configuring UDDI 3.0 in BizTalk 2013

Hi Team ,
While configuring BizTalk UDDI 3.0 , i am getting an error "unable to connect to DB Server. " In BizTalk 2009 , hotfix was available , but could not find any for BizTalk 2013
DB Server : SQL Server 2012 64 bit
Please help me to fix this
Abhijith

Got the solution
We need to proceed in such a way that DB component alone need to be installed in DB Server. Rest in BizTalk Application Servers
FYI
http://tjthompson5150.blogspot.in/2010/04/esb-toolkit-20-multi-server.html
Abhijith

Unable to connect to Services Registry(error) while connecting from NWDS

Hi SDN friends,
I am trying to do WSDL import from NWDS (Developer Studio SAP NetWeaver 7.1 Composition Environment SP03 PAT0000 Build id: 200710302120 ) and i am getting following error
"Unable to connect to Services Registry"
Below are the service regsitry details i am passing
window --> Preferences
Service Registry (UDDI Service)
Server Name:sr.esworkplace.sap.com
Server Port:sr.esworkplace.sap.com
Server Port:50000
Server HTTPS Port:50043
Inquiry Path:uddi/api/inquiry
Publish Path:uddi/api/publish
Security Path:uddi/api/security
Classification Service
Server Name:sr.esworkplace.sap.com
Server Port:50000
Server HTTPS Port:50043
Classification Path:ClassificationService/CS?style=document
I am using the following credentials for login to UDDI Service http://sr.esworkplace.sap.com
login/pwd: sruser
password: esword123
I tried with two different systems (office and Home) , bit still not connecting.
Waiting for experts answer.
Thanks
Aravinda

Hi,
You wrote that you connect to the SAP uddi:
Service Registry (UDDI Service)
Server Name:sr.esworkplace.sap.com
Server Port:sr.esworkplace.sap.com
Server Port:50000
Server HTTPS Port:50043
Inquiry Path:uddi/api/inquiry
Publish Path:uddi/api/publish
Security Path:uddi/api/security
sr.esworkplace.sap.com is not on your home pc. Its a SAP public uddi.
If you want to connect to your own pc than your configuration would be sompething like this:
Server Name:localhost
Server Port:50000
Server HTTPS Port:50043
Inquiry Path:uddi/api/inquiry
Publish Path:uddi/api/publish
Security Path:uddi/api/security
And you shouldn't use this login data
login/pwd: sruser
password: eswork123
regards,
v s
Edited by: v s on Jul 2, 2008 9:31 AM
Edited by: v s on Jul 2, 2008 9:34 AM

Debug Remotelly WebLogic Web Service - Debugger unable to connect

I have been able to debug locally when I start debug from IntegratedWebLogicServer,
but I have not been able to debug remotelly although I deploied successfully to WebLogic Server and I got correct result while testing from SoapUI.
With the purpose to debug remotelly the simple web service described below, I have done these steps on my enviroment:
On WebLogic
1) In the WebLogic console, belong the AdminServer definition, I browsed to Protocol > HTTP Tunneling and I checked it.
2) In startWebLogic.cmd I added:
set JAVA_OPTIONS=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=n %SAVE_JAVA_OPTIONS%
3) In setDomainEnv.cmd I changed to be:
set debugFlag=true
if "%debugFlag%"=="true" (
set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
After that, I restarted the weblogic.
On JDeveloper
4) In the page Project Properties > Run/Debug/Profile > Default > Edit:
I wrote the path to the HelloWorld.java on Default Run Target box.
I checked Remote Debugging
5) I right clicked the project and clicked Start Remote Debugger.
On Attach to JDPA Debugger window I wrote LocalHost on Host and 4000 on Port.
In my log window I got this message:
"Debugger attempting to connect to remote process at LocalHost 4000.
...Debugger unable to connect to remote process."
I was expecting to be able to call the web service from SoapUI and then stop on my breakpopint. What else should I do?
The only suggestion found on internet I have not done was
"In order for JDeveloper to work with WebLogic it will need a copy of the weblogic.jar file that can be found at [WLS-root]\weblogic1001\server\lib, copy this file to [jdev-root]\jdev\lib\ext directory and restart JDeveloper."
(http://www.oracle.com/technetwork/developer-tools/jdev/remotedebugwls-086628.html) I didn't find the path [jdev-root]\jdev\lib\ext in my computer.
My Sources:
//HelloWorld.java
package demo;
import javax.jws.WebService;
import javax.xml.ws.BindingType;
import javax.xml.ws.soap.SOAPBinding;
@WebService(portName = "HelloWorldSoap12HttpPort")
@BindingType(SOAPBinding.SOAP12HTTP_BINDING)
public class HelloWorld {
public String sayHello(String firstname, String lastname){
return "Hello " + firstname + " " + lastname;
//web.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<servlet>
<servlet-name>HelloWorldSoap12HttpPort</servlet-name>
<servlet-class>demo.HelloWorld</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorldSoap12HttpPort</servlet-name>
<url-pattern>/HelloWorldSoap12HttpPort</url-pattern>
</servlet-mapping>
</web-app>

Check out which port is actually used by your WLS for debug.
Some instructions here:
http://thirumalaisamyt.blogspot.com/2012/10/jdeveloper-remote-debugging.html

SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent

Dear all,
i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
Yesterday we reboot the Server, now the SQL Server Agent is unable to start!
The SQL Server is up and running,
Errorlog:
2009-11-06 09:49:52.56 Server      Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
Nov 24 2008 16:17:31
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
2009-11-06 09:49:52.56 Server      (c) 2005 Microsoft Corporation.
2009-11-06 09:49:52.56 Server      All rights reserved.
2009-11-06 09:49:52.56 Server      Server process ID is 5912.
2009-11-06 09:49:52.56 Server      Authentication mode is WINDOWS-ONLY.
2009-11-06 09:49:52.56 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2009-11-06 09:49:52.56 Server      This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
2009-11-06 09:49:52.56 Server      Registry startup parameters:
2009-11-06 09:49:52.56 Server      -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2009-11-06 09:49:52.56 Server      -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2009-11-06 09:49:52.56 Server      -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2009-11-06 09:49:52.59 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-11-06 09:49:52.59 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2009-11-06 09:49:52.67 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-11-06 09:49:52.71 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server      Database mirroring has been enabled on this instance of SQL Server.
2009-11-06 09:49:53.73 spid4s      Starting up database 'master'.
2009-11-06 09:49:53.86 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2009-11-06 09:49:53.95 spid4s      SQL Trace ID 1 was started by login "sa".
2009-11-06 09:49:53.97 spid4s      Starting up database 'mssqlsystemresource'.
2009-11-06 09:49:53.99 spid4s      The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
2009-11-06 09:49:54.16 spid9s      Starting up database 'model'.
2009-11-06 09:49:54.17 spid4s      Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
2009-11-06 09:49:54.19 Server      The certificate was successfully loaded for encryption.
2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv6> 1433].
2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv4> 1433].
2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-11-06 09:49:54.19 Server      Server is listening on [ ::1 <ipv6> 1434].
2009-11-06 09:49:54.19 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2009-11-06 09:49:54.19 Server      Dedicated admin connection support was established for listening locally on port 1434.
2009-11-06 09:49:54.31 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2009-11-06 09:49:54.33 spid15s     Starting up database 'AdventureWorks'.
2009-11-06 09:49:54.33 spid16s     Starting up database 'EnterpriseVaultDirectory'.
2009-11-06 09:49:54.33 spid14s     Starting up database 'Test'.
2009-11-06 09:49:54.33 spid12s     Starting up database 'AdventureWorksDW'.
2009-11-06 09:49:54.33 spid17s     Starting up database 'EnterpriseVaultMonitoring'.
2009-11-06 09:49:54.33 spid13s     Starting up database 'msdb'.
2009-11-06 09:49:54.33 spid23s     Starting up database 'EVVSExchangeVaultStore_2'.
2009-11-06 09:49:54.33 spid22s     Starting up database 'EVVSGVIE_2_2'.
2009-11-06 09:49:54.33 spid24s     Starting up database 'EVVSJournalVaultStore_3'.
2009-11-06 09:49:54.33 spid19s     Starting up database 'EVVSVIEIT_1'.
2009-11-06 09:49:54.33 spid21s     Starting up database 'ReportServerTempDB'.
2009-11-06 09:49:54.33 spid20s     Starting up database 'ReportServer'.
2009-11-06 09:49:54.33 spid18s     Starting up database 'EVVSGVIEIT_1_1'.
2009-11-06 09:49:54.56 spid9s      Clearing tempdb database.
2009-11-06 09:49:54.61 spid19s     CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.65 spid23s     CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.71 spid24s     CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.75 spid16s     CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.83 spid17s     CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.99 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2009-11-06 09:49:55.55 spid9s      Starting up database 'tempdb'.
2009-11-06 09:49:55.68 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2009-11-06 09:49:55.68 spid12s     The Service Broker protocol transport is disabled or not configured.
2009-11-06 09:49:55.68 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2009-11-06 09:49:55.72 spid12s     Service Broker manager has started.
Only the SQL Server Agent is unable to start,
Eventlog:
Log Name:      Application
Source:        SQLSERVERAGENT
Date:          06.11.2009 10:09:52
Event ID:      103
Task Category: Service Control
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      vie-eu-arc-02.global.domain
Description:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SQLSERVERAGENT" />
    <EventID Qualifiers="16384">103</EventID>
    <Level>2</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
    <EventRecordID>8486</EventRecordID>
    <Channel>Application</Channel>
    <Computer>vie-eu-arc-02.global.domain</Computer>
    <Security />
</System>
<EventData>
    <Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
</EventData>
</Event>
SQLAgent.out Logfile:
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
Additional the SQL Server Management Studio is unable to logon to the Server:
TITLE: Connect to Server
Cannot connect to vie-eu-arc-02.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The local Admin Password was reset to the "original" (after install) one.
Any ideas how to fix the problem?

Dear all,
the encryption was NO on all protocols.
Because no additional ideas available, i uninstalled the SQL Server on friday.
At the Re-Install Process i got again an error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
The install process failed.
On google i found the same problem in an other thread:
http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
++++++
During the installation process of SQL Server 2005, Setup complains it cannot
connect to the database service for server configuration. The error was:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
everytime the installer attempts the connecting the pipe is closed by the
server and another is reopened. That's why the Client says there is no
process on the other end of the pipe.
I have re-installed 'everything', tried connections via TCP, but nothing
works.
I have made a small application to connect to the pipe and noticed that
there are 3 instances of the pipe running, one that I am connecting to, and 2
listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
reopens another too. The difference is that SQL server writes an error
message in the log file. No such luck when the Native client is doing the
same.
What more can I do?
++++++
and an answer
++++++
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I renamed it to another name and re-installed sql server.
I noticed that sql server ERRORLOG complained about certificate that it
couldn't load and the generation of a self-generaed certificate (see below)
"2005-12-10 21:01:02.30 Server The server could not load the
certificate it needs to initiate an SSL connection. It returned the following
error: 0x8009030d. Check certificates to make sure they are valid.
2005-12-10 21:01:02.49 Server A self-generated certificate was
successfully loaded for encryption."
Now the installation succeeded
++++++
With Windows 2008 it was really a challange to get access to this folder (!!!)
After clearing the folder the ReInstall of SQL Server works fine.
Now the SQL Server & the SQL Server Agent works again.
The problem was anything with encryption, old certs & files.
I don't think that everyone can afford reinstalling SQL server.
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I think this is what the following blog was saying , a problem with certification
http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
Cheers
Please mark as answer if you think this answers your questions

Adding a Subreport to existing report and getting this error, "Unable to connect: incorrect log on parameters"

I have taken on an existing vb.net project done in Visual Studio 2008 with crystal reports version Crystal Report XI.
The reports on their own work very well. Problem is I need to add information to my report which is a 'many-to-one' situation where for each Project Id that I am displaying I need to display several attached documents and the report I am working on is for several Project Id's.
I figured this would be a perfect situation for a SubReport. I created a separate report which calls a stored procedure to get all of the Attached Documents for a specific Project Id. I thought if I were to add this new SubReport to the Original Report and link the Project Id's, easy-peazy, I would be done.
This is not the case. I have vb code that loads the Original Report with a stored procedure and when this code runs with the setup I described above it fails when it is creating the final report with the following error:
Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\~\ProjectDescriptionReport {6BA19F79-2A12-4826-B1F6-456EF799963B}.rpt: Unable to connect: incorrect log on parameters.
I have no specific connections in my vb code for the reports. If I do not add the subreport to the main report, it loads correctly, so I know the error is caused by the subreport.
This is the code that creates the original report (sorry for dumping the code here, i just thought it would be easier to see all the code) :
Public Function LoadReport(ByVal inProjectNum As Integer, ByVal strProjectName As String) As DataTable ', ByVal inFiscalYear As Integer, ByVal inCompany As String) As DataTable
        Dim cnn As SqlConnection = Nothing
        Dim cmd As Data.SqlClient.SqlCommand
        Dim obj As New clsDataClass
        Dim dataAdapter As SqlClient.SqlDataAdapter
        Try
            LoadReport = New DataTable("DescriptionReport")
            cmd = New SqlCommand()
            cnn = obj.Create_Connection()
            With cmd
                .CommandType = Data.CommandType.StoredProcedure
                .Connection = cnn
                .CommandTimeout = "60"
                .CommandText = "usp_GetProjectGroupSpecsCR"
                .Parameters.AddWithValue("@ProjectNumber", inProjectNum)
                .Parameters.AddWithValue("@ProjectName", strProjectName)
            End With
            dataAdapter = New System.Data.SqlClient.SqlDataAdapter
            dataAdapter.SelectCommand = cmd
            dataAdapter.Fill(LoadReport)
            Dim oRpt As New ReportDocument()
            oRpt.Load(Server.MapPath("ProjectDescriptionReport.rpt"))
            oRpt.Refresh()
            oRpt.SetDataSource(LoadReport)
            'oRpt.OpenSubreport("AttachmentsReport").SetDataSource(LAR)
            oRpt.SetParameterValue("inProjectNum", inProjectNum)
            oRpt.SetParameterValue("strProjectName", strProjectName)
            oRpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "Projects_DescriptionReport") 'inCompany & "ProjectsReport_Description" & inFiscalYear) <-- Line where the error occures.
What I need to know is what is the proper way to add a subreport to a vb.net application?
From the ways I have tried it is clearly not working and I am out of ideas. I am fairly new to Crystal Reports and this way of coding it.
Any help for this would be greatly appreciated, I've been stuck on this for a while and am finally reaching out to the Crystal Report Specialists.
Thank you in advance,
Bryan

Hi Bryan,
You may want to check the Connection properties also. I think the MS Data.SqlClient.SqlCommand is using the MDAC driver, or could be modified.
If you are connecting to SQL Server 2008 or above you should be using the SQL Native 10 or 11 Client.
As Dell suggests have a look at the samples and if you can use a DSN ( 32 bit or 64 bit ODBC Admin )
Also search for "CRlogger", you'll find how to enable CR's database logging component and may help show you what part is failing.
Don

[Solved] Samba log spam: Unable to connect to CUPS server

Hi everyone,
I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
Those last two lines get spammed constantly.
I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
Unfortunately it doesn't appear to make any difference.
Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = no
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
; [homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
; [printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[shared]
path = /media/shared
valid users = foosoft
public = no
writable = yes
[tomato]
path = /media/data1/tomato
valid users = foosoft
public = no
writable = yes
show add printer wizard = no
printing = none
printcap name = /dev/null
disable spoolss = yes
I'm totally out of ideas here, anyone have a tip on what I could try next?
Last edited by FooSoft (2009-04-18 19:52:28)

glad you posted it first i had the same problem.
However, samba was complaining that
printing = none
was invalid. I removed that line and it works great.
thanks
Last edited by lio (2009-10-16 00:20:14)

JDeveloper unable to connect to public UDDI

Similar Messages

Maybe you are looking for