JDI doubts

Hi ,
Can some one answer to some of my basic questions regarding JDI.
    what is a track, when will we create multiple tracks ??
   how do we make builds ??
   what happens when we activate , will the changes automatically go to
   development system??
   what happens when we release ??
   what is active and inactive state ??

Hi,
Go to the following links
1) <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/01/9c4940d1ba6913e10000000a1550b0/content.htm">NWDI</a>
2)<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/44/0d18d725301a78e10000000a1553f6/content.htm">Getting Started with NWDI</a>
Regards
Suresh

Similar Messages

JDI Migration - Media Selection doubt !!

Hi,
     We are doing a JDI migration from AIX to HPUX. the DB is Oracle 10.2.0.2.
   we have few confusions as we are new to netweaver..
    1. what is the difference between JDI and NWDI..(our undeerrstanding is, in 6.4 version its called JDI and 7.0 version its called NWDI).
    2. We are planning to select the NW04S SR2 DVD's to do the JDI migration, by selecting the Additional software ->System Copy ->     Oracle -> Target System -> Central System -> Based on AS Java -> Central System installation. is it correct ??
    3. If we are at a wrong selection of the DVD's for JDI, please let us know what DVD's should we select for the JDI migration..( our assumption is, if we select NW04S SR2 DVD's, and proceeed with migration then we will be doing a migration for NWDI and not JDI, if this is true please guide us with media to be selected for JDI as it is called JDI in 6.4 version)
      These are the three questions we have !!
      Appreciate your reply
   Thanks
    Sourav

Hi,
you to use the NWDI you have to install usage types:
1. AS Java - this is a must for NWDI.
2. usage type Development Infrastructure (DI), which is actually the SAP NetWeaver Development Infrastructure (or NWDI in short).
You have to follow the installation guides for the 2004s. they are on the service marketplace: http://service.sap.com/instguides -> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) -> Installation.
when you have finally installed the NWDI, you follow the link to the post-installation tasks in order to configure the NWDI server (that is to configure DTR, CBS and CMS).
Kind regards, Jordan
Message was edited by:
        Jordan Stanchev

NWDS doubt

Hi,
I have installed nwds 7.31 and i created projects from nwdi in that.
When i open my nwds path \nwds-extsoa-...\eclipse\workspace.jdi path, i can see folders .dtr, 0 , 1 , local developement.
But i dont see any .dtc folder. I searched in C:/Users/ also but didnt find .dtc
In folder 1, i can see my DCs and SCs.
My doubt is in 7.31 .dtc is replaced as 1 ? or else how to get .dtc folder ?
Thanks in advance,
Alex

Hi Alex,
you are welcome!
I am not sure it'd properly work. There are other files and folders that have to be in sync with those devconfig folders. What I still don't understand, why don't you just fire up your NWDS on the target client machine and simply import the corresponding development configs to your NWDS ?
NWDS is only a client, the party goes on the server.
Without connecting to NWDI it all makes no sense even if you would find a brute force way copying devconfig folders from A to B. You could acually even delete your entire NWDS installation from the original client machine (considering you have no checked out activities) and still nothing would get lost because everything is on the server (the archives are in CBS and the sources in DTR). Once deleting your local NWDS workspace you could reimport the given development config in a minute and then you'd be there were you were before the deletion. But consequently you can do this on any other client machine, even if it is on the other side of the world (having proper connection to the server (NWDI)).
Cheers,
Ervin

Doubt in fbl1n transaction

hi i have a doubt....
in fbl1n transaction, there are open items and cleared items.
in it the cleared items for certain document types such as invoice etc is not present in the open item table (bsik)
however the cleared items for document types such as general voucher its present in the open items table (bsik)
is this possible as all cleared item entries shld b present in the open item table with an indicator set for cleared or not...
plz exlain!

Hi
There are 2 tables(open and Closed Items) in FI for Account Payables and Account Receivables and GL accounts
1.Account payables: BSIK is Open Items and BSAK is Closed items
2.Account Receivables; BSID and BSAD for OPEN and closed items
3/GL accounts : BSIS and BSAS for Open and Closed Items
Reward points for useful Answers
Regards
Anji

Doubt in creation of a new object

Hi All,
I have one doubt in creation of a new object.If a new object is to be created and it is not a subtype
of any existing object, then what should we enter in the Program field for creating the object?
I hope I am clear with my question.
Thanks in Advance,
Saket.

Hi Saket,
Following will be required for created a custom business object.
1. Object Type - ZTEST (Internal Techincal Key)
2. Object Name - ZTESTNAME (Technical Key Name)
3. Name - TEST (Name of BO, it is used while selecting the object type)
4. Description - (Short Description of BO)
5. Program - ZTESTPROGRAM (ABAP program in which the methods of the object type are implemented)
6. Application - A or B.. etc (Area to which your BO is related)
Please remember that you can learn these basic things by giving F1 help on those fields and in HELP.SAP.COM.
Regards,
Gautham Paspala

Doubt in sender mail adapter

Hi Everyone,
Can we read and validate the attachment of the mail.If so how to do it.
Thanks in advance,
Sakthi

Hi Sakthi,
Please refere the below links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/52b240ac052817e10000000a1550b0/frameset.htm
Let me know if you have any doubts regarding this.
Thanks,
sekhar.

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

PI' RFC Connection pool doubt.

Hi PI exports:
i have a doubt about pi' RFC Connection pool ,pi RFC receive channel can set the conn pool size ,but when start the rfc receiver channel ,is there always only one Connection pool ,or there is only one Connection pool instance?
thinks
Edited by: kevin liang on Oct 19, 2009 6:45 AM

Hi,
Connection poolins size means how many number of connection you want to make open to send data to ECC, We can define maximum number of connection in Receiver RFC Adapter,Go to additional parameters section and define Max Number of connection give the number there,thats it.Internally it works as Connection poolin mechanism.
Regards,
Raj

Small Doubt Regarding SY-MANDT

Hi All,
     SELECT changenr FROM cdhdr CLIENT SPECIFIED INTO CORRESPONDING FIELDS OF TABLE it_cdhdr
                                         WHERE mandant = syst-mandt
                                         AND   objectclas = 'MATERIAL'
                                         AND   objectid   = wa_matl-matnr
                                         AND   tcode      = 'MM02'.
     I have written the select stament as shown above.
     In this i have a doubt like adding a field sy-mandt in the where condition will increase the Efficiency of program or not.
regards,
raghu.

Hi..
No doubt the efficency would be affected but from business point of view there will many things that need to be checked as in:
If you are viewing data from CDHDR and CDPOS which is client specific then you are not viewing complete data.
These tables give us and document changes made to a particular object in SAP but if anything is cross client like company code(lets assume) then changes to it wont be visible in all the clients..
so there can be some key information you can miss out while working on some of the objects.
else in this case its good to make query cross client.
regards
vishal

Doubts with control break statements on internal table loops (AT/ENDAT)

Hi, i've had a couple of doubts for a long while which I hope someone can clarify today:
1) I know how to use the AT statements, however, i'm not sure I get correctly what this part of help regarding this commands means:
"The control level structure with internal tables is static. It corresponds exactly to the sequence of columns in the internal table (from left to right). In this context, the criteria according to which you sort the internal table are unimportant."
I've always sorted the internal table before the control break and it works that way. For example:
SORT ITAB BY EBELN EBELP.
LOOP AT ITAB.
AT NEW EBELN.
* Code for the order header
ENDAT.
ENDLOOP.
If I don't sort the internal table, it doesn't work! (i get dupplicated processing). In the example, if i have more than one register with the same EBELN and they're not consecutive, the header gets processed twice. I really don't get that part of the help text.
2) I know this: "At the start of a new control level (i.e. immediately after AT), the following occurs in the output area of the current LOOP statement:
All character type fields (on the right) are filled with "*" after the current control level key.
All other fields (on the right) are set to their initial values after the current control level key."
My doubt is: WHY is that this way? Because sometimes (most times) I need those fields INSIDE the statement! So when that happened i've solved it in one of three ways:
LOOP AT ITAB INTO WA_ITAB.
WA_ITAB_AUX = WA_ITAB.
AT NEW FIELD.
 WA_ITAB = WA_ITAB_AUX.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
LOOP AT ITAB INTO WA_ITAB.
AT NEW FIELD.
 READ TABLE ITAB INDEX SY-TABIX INTO WA_ITAB.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
* (Without AT)
LOOP AT ITAB INTO WA_ITAB.
IF WA_ITAB-FIELD <> FIELD_AUX.
 FIELD_AUX = WA_ITAB_FIELD.
* ...Rest of the code for the first register
ENDIF.
ENDLOOP.
Is there any problem with this way of coding? Can be done better?
Thank you very much in advance.

Hi..,
1)
See if u sort the table on a field on which u r using AT ENDAT .. then all the records which are having the same value for that field will form a group or those reocrds will be at one place.. so when u sort the table for all the records AT ENDAT will get executed onli once..
If u dont sort this table on this field then all these records will be at different places and in between there may be records with different value for this field.. so this AT ENDAT will get executed for each record !!
2)
No u cannot use the Right hand fields of the field in the table .. Because these AT events work as Group based operations... So till that field on which AT ENDAT is working it breaks that record into two groups.. One is the left hand fields including that field.. and right hand fields as another group.. and makes the right hand group as stars ****. Thats y u can observe that even any one field in the left hand group changes the AT ENDAT will get executed !!!!
Hope u understood !!!
regards,
sai ramesh

LOOP DOUBT INSIDE PACKAGE

CREATE PACKAGE EMP_PKG AS
CURSOR EMP_CUR IS
SELECT EMPNO,DEPTNO,SAL,HIREDATE
FROM EMP
WHERE DEPTNO=30;
PROCEDURE P_EMP;
PROCEDURE P_GET_SAL(V_EMPNO NUMBER);
PROCEDURE P_GET_LOC(V_EMPNO NUMBER);
Now inside my Package Body
INSIDE THE MAINPROCEDURE P_EMP
I WILL BE CALLING THE BELOW TWO PROCEDURES
PROCEDURE P_EMP
BEGIN
FOR I IN EMP_CUR LOOP
P_GET_SAL(I.EMPNO);-- DO I NEED TO LOOP AGAIN IN P_GET_SAL PROC?
P_GET_LOC(I.DEPTNO);
END LOOP;
END;
NOW WHAT IAM DOING IS
in my P_GET_SAL Procedure is
PROCEDURE P_GET_SAL(V_EMPNO NUMBER)
V_SAL EMP.SAL%TYPE;
BEGIN
FOR I IN EMP_CUR LOOP
SELECT SAL INTO V_SAL FROM EMP
WHERE EMPNO=I.EMPNO --DOUBT HERE
END;
I WANT TO KNOW WHETHER I NEED TO LOOP AGAIN
HERE OR INSTEAD OF THAT
PROCEDURE P_GET_SAL(V_EMPNO NUMBER)
V_SAL EMP.SAL%TYPE;
BEGIN
SELECT SAL INTO V_SAL FROM EMP
WHERE EMPNO =V_EMPNO;
END;
SINCE iam calling V_EMPNO WITH CURSOR FROM MY
MAINPROCEDURE ..
WILL THE PROCEDURE USES THE CURSOR VALUES
AND LOOP ITSELF FOR EVERY EMPLOYEE TO
GET THE SALALRY ?
PLEASE LET ME KNOW SINCE MY PACKAGE IS MORE THAN 3000
LINES I cant proceed unless its confirmed i can
do so ..

Hi all,
Thanks for Looking into my Problem
I Got answer by MySelf ..i dont need to loop again my sub procedures
if i try to do that iam getting the error
ERROR at line 1:
ORA-06511: PL/SQL: cursor already open
Thank you all once again ..

Doubt on Rows and Coloums in BEx Query Designer.

Hello, Experts.
I have a Doubt in BEx Query Designer.
In the Rows I have a Fiscal year Period, if the user enters the Fiscal year period for e.g. : 001/2006 .
in the columns i have forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ).
My Questions is , as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
Thanks in Advance .
Sharp

yes i am Doing Offest.
I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period . it worked. but
when i kept this in Rows and deleted Previous Fiscal Year period . it is displaying blanks.   in prior years forecast.
is it because i am Ristricting it to only fical year period which user entered
         Colums--> Forcast ( User Entered year )          Prior year
Rows
Fiscal year period
Fiscal year period( user enterd )
Thanks

Doubt regarding facebook integration for windows phone 8.1 silverlight app?

Hi,
I am developing a windows phone 8.1 silverlight application . For my application I integrated the facebook login. For this facebook integration I used the login with facebook app method.
My doubt is after getting the app id from the dev center , I updated the appid at developers.facebook.com , wmmanifest.xml (In extensions protocol (msft-appid without dashes)) . Or do I need to change the product id in the place holder also , I tried to
change the productid also but I am getting error like some signature is wrong try with different signature. I am confused how to do it .
Any help,
Thanks...
Suresh.M

Hi Suresh,
According to your description, I assume you want to complete facebook configuration in windows phone silverlight app. Please refer to the following link to see how.
http://facebooksdk.net/docs/phone/config/.
You can find code sample from
https://github.com/facebook-csharp-sdk/facebook-winclient-sdk/tree/master/Samples.
Facebook API is third-party library and it is our of our support range. You can post questions on here.
https://github.com/facebook-csharp-sdk/facebook-winclient-sdk/issues.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Infoset doubt

Dear Gurus,
i have a doubt regarding use of infoset in BI.
An infoset consist of , on the left, a DSO containing line items loaded from R/3.
On the right is a master data attribute loaded data from a user defined datasource based on a transparent table in r/3.
This master data has a single Key. Its a numeric like serial number field.
The transaction data in the DSO also has this field as part of the transaction data field (non-key).
A Left Outer Join is made between the 2 using several fields joining together. However, the key field in the master data is not joined even though both sides has it. Both this field in each are not joined.
So, by theory of a left outer join, All data not found in the master data will still be selected via the infoset.
I wish to understand :
1. by a 'join' does it mean its not a union? I assume so. But based on the meaning of left outer join, it sounds to me like a union?
Correct me if i am wrong.
2. what is the effect of not joining the master data key field to the same field found in the data part of the transaction data?
best regards
Bass

hi,
point 1:
am i right to say
If all data on the left is picked, and some latest data in the master data is not found in the left, only all the left side data is displayed am i right? so, what is not in the right (master data attr) will not be selected by the infoset?
left outer join will be more clear with an example to you, suppose you are joining cube and master data to pick attribute value from master data. let us say the master data has below value.
master data     attribute
100                ABC
102               XYZ
103              DEF
Now in cube you have data
cube field
100
101
105
106
the infoset wll be returning the value as shown below for different scenarios
left outer join: all values in cube.
field    attribute
100      ABC
101        #    (no value in master data)
105       #    (no value in master data)
106       #    (no value in master data)
Inner join: common records
field    attribute
100       ABC
Right outer join
field    attribute
100                ABC
102               XYZ
103              DEF
point 2:
am i right to say
its just slower performance and the rest being similar effect as joining the key field?
So, if i join the key field it will be faster and the result is the same as not joining the key field of the master data to the transaction data?
no the join determines the amount of data it will be returning as explained above, you should define the joining conditions based on your business logic, like in the above case if the two fields should have same value and are the comparing criteria then you should join those as it would help in retrieving faster results.regards,
Arvind.

DSO - Key Field doubt?

Hi All,
I want to know the functionality of the Key Field in the DSO.
I know based on the Key Fields(Primary Key) data is pulled to DSO, but please explain me the below scenario
E.g
I have 3 records in the Extractor( Generic) and i am pulling data to DSO - Full load.
Material                 Qty       Date
100                       20        1-Jan-2010
100                       30        5-Jan-2010
100                       10        10-Jan-2010
In DSO i have only one Key field called 0MAT_NM (Material Number), but i have 3 records in the Extractor , shown above.
Now my Question is
On what basis data will be pulled to DSO?
Whether latest date records will be pulled to DSO or let me know correct method? because i have got material no 100
but date and Qty is different (means one time it is taking Qty - 30 and date as 1st Jan 2010, other run it is taking differnet).
Please clear my doubt.
Regards,
Nithi.

in your dso you can have one record per key. keyfigures will be in addition or overwrite option. if in "addition' the value will be the sum of all the values for a given key. in 'overwrite', you'll only keep the last record written to the dso; char are always in overwrite, so you'll keep the last record written to the dso
M.

JDI doubts

Similar Messages

Maybe you are looking for