JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

Similar Messages

Is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

# As to what is the best browser, it is subjective. I think it is the best, others will disagree. There is no special version for Windows Server 2003, the usual version works on it.
# It is free of charge and will always be free.
# It is open source.
# You can get it from http://www.mozilla.com

Help:where can i download jdk1.4 amd64-bit for windows server 2003 version?

where can i download jdk1.4 amd64-bit for windows server 2003 version?

Thanks all for your replys.
As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
When will be 64 bit runtimes for CR 08 will be available?
Thanks

Incorrect link for "Oracle9i Release 2 for Windows Server 2003 (32-bit)

Hi. Go to here http://www.oracle.com/technology/software/products/oracle9i/index.html
Then, under "Oracle9i Release 2 (9.2.0.1)", try to download "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit). It just gives you a patch. It's not the correct link. Where is the full CD images!
Compare this to the 64-bit version under "Oracle9i Release 2 (9.2.0.2). This does have 2 big CD images.
Can you fix the link? I need the software for Windows Server 2003 (32-bit). Thanks.

Yes, it's a little confusing but it's all in the release notes on that page. Basically, you need to install 9.2.0.1 for WinNT/2000 first and then apply the patch to bring it up to v9.2.0.3 for Windows 2003.

Incorrect download file for Oracle 9.2.0.1 for Windows server 2003

Hi,
I am trying to get hold of the Oracle 9.2.0.1 client software for Windows server 2003 from <http://www.oracle.com/technology/software/products/oracle9i/index.html> the link is in the section "Oracle9i Release 2 (9.2.0.1)", titled "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)"
I follow the links through and download the OUI and "9.2.0.1" software, however after downloading and unzipping the package it seems that the download was actually the 9.2.0.3 patch that cannot be installed without 9.2.0.1 installed first. I tried this on Friday and today with the same results.
Could you tell me how I get hold of the 9.2.0.1 client software for Windows Server 2003 please?
Thanks,
Mark Williams

As Windows 2003 is officially released this week, I believe Oracle will shortly announce which versions of the database will be supported on Windows 2003. Stay tuned.
Alison

How to download oracle forms 6i for windows server 2003 or linux

hi all,
In my company there is a forms 6i server, now we want to move it to a new server for upgrade operations. for now we want to install forms 6i version on windows server 2003. on quick search I found it for xp but none for windows server 2003. if I try to install xp version I got "javai.dll is not valid" error.
how can I download it ? Company has license information also. what should I do ? for ex should I open a SR on metalink or something like that ?
thanks a lot.
Edited by: elcaro on Jan 18, 2013 7:43 AM

elcaro wrote:
hi all,
In my company there is a forms 6i server, now we want to move it to a new server for upgrade operations. for now we want to install forms 6i version on windows server 2003. on quick search I found it for xp but none for windows server 2003. if I try to install xp version I got "javai.dll is not valid" error.What is the complete error message?
how can I download it ? Company has license information also. what should I do ? for ex should I open a SR on metalink or something like that ?Did you try this file? -- http://download.oracle.com/otn/nt/forms/6i_rel2_xp.zip
You may log a SR if this does not work.
Thanks,
Hussein

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Oracle for Windows Server 2003 - Download file

Hi,
I download Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit) from OTN(file 9203WIN2K3.zip), but it doesn't have any setup file on the extracted files.
I think that file 9203WIN2K3.zip is not complete or is not the appropriate one.
Can anybody please help me ?
Thanks !
Mauro Moreira
Cuiabá - MT - Brasil

I am actuallt trying to do the same. What I fond out at one time, was that installing 9i on Windows 2003 is a multiple step process. First, you install the reqular three CD (or DISKS if you download the installation) and then you install the patches. I think what you have downloaded is only the patch. Read the README that comes with the zip file. I am looking for the document that described installing 9i on 2003. If I find id, I will pass it on.
Kamran
[email protected]

Oracle for window server 2003 xeon 64 bit

Which oracle we use for window server 2003 xeon 64 bit

Dear User,
http://www.oracle.com/technology/support/metalink/index.html
Regards,
Taj

Install ID CS4 Desktop version in Windows Server 2003

Is it possible to install Indesign CS4 Desktop Version on Windows Server 2003.
When i tried to install it was showing Warning with the message
System requirements not met.
Regards,
Suresh

It can be installed.

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Cannot print to PDF Printer in Windows server 2003 x64 (Adobe 9 STD)

Hi everyone,
I'm running into a very odd issue. We are using Citrix Presentation Server 4.5 in our environment. Recently, I install the x64 bit version of Citrix on top of Windows Server 2003 x64.
The problem that we are experience right now is that when user open a WORD or EXCEL document and try to print to PDF. The SAVE AS windows shows up to allow users to save, but nothing happens afterward. In another word, no PDF file is created.
However, if I ask the user to right click on the file (in windows explorer) and choose Convert to PDF, then the conversion go through.
Do you know a fix for this?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!

Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Migrating MOSS from windows server 2003 x64 sp2 to 2008 R2

Dear All,
I can't find too much data supporting this issue
all articles says restore farm / migrate IIS / copy and replace 12 hives
I don't believe this is so practical
I need more in depth details like how IIS will be migrated [Should I use web deployment tools]
what about customized solution that modifies the web.config file and deployed as farm solutions will IIS migration tool override the changes on it
Thanks for help

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Similar Messages

Maybe you are looking for