JDK installation on Windows 8, 64 bit OS

Hi,
I am trying to install JDK 6/7 on my new 64 bit Windows 8 OS. However none of the installation completes. Moment I click on the installer pop up comes with following message : "Java SE development Kit 6 Update 45 (64-bit) Setup is preparing the installation wizard which will guide you through the program setup process. Please wait "
I kept waiting for almost an hour or so for installation start but it dint do anything. I have tried with all the JDK 7/6 installer available but nothing works out. Is anyone aware on any such issue ?
Thanks,
Manoj

I got fail to install Java EE SDK too. Just received a popup message of missing JRE but tested ok at command console with proper path setting. I have just raised a new thread about my case. It was so poor why "NO" Oracle professional did support your thread for so long time? .

Similar Messages

Oracle BIEE (11.1.1.5.0) Installation on Windows 7 (64 bit) hung at 98%

Dear Friends,
I am unable to perform Oracle BIEE (11.1.1.5.0) Installation on Windows 7 (64 bit)
It is gettting hung at 98%.
what is the Fix.
The error log is :
java.lang.IllegalStateException: Invalid weblogic home specified: c:\OracleBIEE11g\wlserver_10.3
     at oracle.as.install.bi.installaction.NodeManagerService._validate(NodeManagerService.java:63)
     at oracle.as.install.bi.installaction.NodeManagerService.install(NodeManagerService.java:31)
     at oracle.as.install.bi.installaction.BIInstallAction._installNodeManagerService(BIInstallAction.java:833)
     at oracle.as.install.bi.installaction.BIInstallAction.executeAfterCopy(BIInstallAction.java:307)
     at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteAfterCopy(InstallActionProviderUtility.java:91)
     at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.executeEvent(ModifiedDWizard.java:2948)
     at oracle.as.install.engine.modules.presentation.PresentationModule.processModuleEvent(PresentationModule.java:655)
     at oracle.as.install.engine.modules.util.PartnerModuleImpl.processEvent(PartnerModuleImpl.java:118)
     at oracle.as.install.engine.InstallEngine.notifyListeners(InstallEngine.java:626)
     at oracle.as.install.engine.InstallEngine.processEvent(InstallEngine.java:584)
     at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyAllEventListenersHelper(PartnerModuleImpl.java:227)
     at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyListeners(PartnerModuleImpl.java:158)
     at oracle.as.install.engine.modules.install.InstallModule.onSuccess(InstallModule.java:478)
     at oracle.as.install.engine.modules.install.action.InstallManager.notifySuccess(InstallManager.java:321)
     at oracle.as.install.engine.modules.install.command.InstallSuccessCommand.execute(InstallSuccessCommand.java:42)
     at oracle.as.install.engine.modules.install.action.InstallManager.onInstallEvent(InstallManager.java:333)
     at oracle.as.install.engine.modules.install.action.AbstractOUIHandler.fireInstallEvent(AbstractOUIHandler.java:147)
     at oracle.as.install.engine.modules.install.action.OUIInstaller.succeed(OUIInstaller.java:542)
     at oracle.as.install.engine.modules.install.action.OUIInstaller.start(OUIInstaller.java:480)
     at oracle.as.install.engine.modules.install.action.InstallManager.launchOUI(InstallManager.java:211)
     at oracle.as.install.engine.modules.install.InstallModule.launchOUI(InstallModule.java:155)
     at oracle.as.install.engine.modules.install.InstallModule$1.run(InstallModule.java:246)
Regards,
DB

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

OBIEE installation on Windows 7 64-bit OS

Hi All,
I want to install Oracle Business Intelligence 10.1.3.4.0 on Windows 7 64-bit OS can you suggest me things that i have to consider in this,
like :-
a) JDK 32/64 bit.
b) ODBC drivers for Oracle 32/64 bit.
any other driver or special consideration which I need on 64-bit OS.
I am curious about it and im going to install it on this weekend.
and if possible can i get other links from where i can get useful information related to this.
Please Help.
-Jagdeep Singh

Hi Mr. Singh,
If you have installed OBIEE successfully on win 7, please guide me with the installation steps that you have followed to install Oracle DB 10g/11g and OBIEE 10.1.3.x on windows 7 Home edition, 64 bit os?
My personal id: [email protected]
Thanks in advance,
Mili

Informatica 9.1 installation on windows 7 64 bit

Hi guys
Could you please help me in installing informatica 9.1 on windows 7 64-bit OS... while extracting the part 2 zip file i am getting below error but the extraction continues
! C:\Downloads\dac_win_101341_infa_win_x86_64bit_910.z01: Cannot create dac_win_101341_infa_win_x86_64bit_910\source\isp\bin\plugins\oie\eclipse\plugins\com.informatica.tools.adapters.ui.sdk.connection_1.0.0\com\informatica\tools\adapters\ui\sdk
\connection\descriptor\SDKConnectionDescriptorHelperManager.class
Total path and file name length must not exceed 260 characters
! The system cannot find the path specified.
! C:\Downloads\dac_win_101341_infa_win_x86_64bit_910.z01: Cannot create dac_win_101341_infa_win_x86_64bit_910\source\server\samples\WebServices\samples\RealTimeWebServices\UnprotectedWebServices\axis\CustomerLookup_MULTIPLEROW\localhost\axis\CustomerLookup\_CustomerMultipleRowLookupOperationResponse.java
Total path and file name length must not exceed 260 characters
! The system cannot find the path specified.
When doing server installation, not able to fine license key...
Thanks & Regards
Edited by: 958481 on Sep 11, 2012 2:15 PM

Use WinZIP to work:
1. Download all parts of the INFA/DAC zip files from eDelivery into the same folder location
2. Use WinZip to unzip the file.
3. Create a directory with a short path name (example, D:\INFA) in which to extract the contents of the downloaded zip files. Avoid using the My Documents folder.
4. Extract the contents of the first zip file (Zip 1 of x) into the directory created in the previous step. WinZip will automatically extract the contents of the second and subsequent zip files.
hope it helps

HP Deskjet Ink Advantage 5525 - Unsuccessful installation for Windows 7 64-bit - Error 5

Hi,
during installation of HP drivers and software to Windows 7 64-bit I receive Error -5 - Installation unsuccessful - Unable to install HP monitor... I've download new software from HP webpage, but received same error.
Could you please guide me trough this problem.
Regards, Max.

Hi @MaxN ,
I see that you are getting a "error 5" when trying to install the printer software. I would like to help you out today.
I would run the SFC on the computer to repair any damaged or corrupt windows files.
Scannow to Repair Protected Windows Operating System Files.
Right click on the installer and "Run as Administrator.
If the issue persists, create a new Administrator Account and run the install from there.
User Accounts in Windows 7.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Itunes 11.0.2 installer for Windows 7 (64 bit) freezes?

I'm having a problem installing iTunes 11.0.2.26 on Windows 7 64-bit. I have tried both the automatic updater and a full uninstall/reinstall with a standalone instalation. It seems to get stuck around the same point. If I try the automatic updater first Safari installs then iTunes starts to install. The iTunes installation gets to around 90% then the installation stalls. There is no error message and the installer just says "Installing..." but the CPU usage drops to 0% on both cores. I have left the installer sitting like this for hours without it finishing. I have not heard anyone else complain about long installation times or stalling. A very similar problem happens if I try to uninstall and then do a standalone installation. The installer gets near the 90% point on the bar and then the process just stops and hangs. If I try to cancel the installation at this point, the installer will stop responding and then I have to end the process. Any help on this frustrating issue would be appreciated!

You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
tt2

How do you overcome a blackscreen upon beginning installation of windows 7 64-Bit on a MacBook Pro5,1?

Hello All,
I have a MacBookPro5,1, upgraded to 8gb RAM running Mac OS X Version 10.6.8.
Apple states that this model is capable of installing Windows 7 64-Bit.
But when I try to install Windows 7 via Boot Camp Assistant, everything goes to plan until Boot Camp restarts the machine where a Blackscreen appears and does not show the windows installation screen. The machine is doing something in the background but then appears to power off. I have to press the power button twice, one long press to stop whatever it was doing then one more to power back on. I can get back into the Mac side with no problem.
I am certain bootcamp does not have the relevent video drivers for the windows installation to use...
I am using a Microsoft certified Windows 7 Professional SP1 image file burnt to a DVD-R, the image was downloaded from Microsoft as part of their student deals.
How do I get the blackscreen to go away?
Kind Regards,
tmanz

Okay,
So I still have the problem.
I was able to upgrade my Mac OS X to Lion using a Retail DVD and this gave me Boot Camp v4.0.
Followed the steps, burn't the downloaded drivers to a DVD. Then selected install on the Boot Camp and the MacBook Pro still goes into a blackscreen where I should see the Windows 7 installation screen.
This problem seems to be similar to the apple problem with their iMac's TS3173, but I am dumbfounded as to why I have this problem. I don't think anyone else out there with a MacBookPro5,1 has this problem.
I think If I had a solution as in TS3173 for the MacBookPro5,1 it would solve my case. Really I need the nVidia drivers for the GeForce 9400M, I tried getting these from the Boot Camp drivers but these are in exe form which would not be detected by the Windows 7 installer.
Is there anyone out there that understands my problem and can advise me?
Your time and efforts are greatly appreciated.
Kind Regards,
tmanz

AutoCAD 2000 Architectural Desktop 3 installation in Windows 7 64 bit Professional

How to get AutoCAD 2000 to install on a Windows 7 64 bit operating system. The problem we were having was with the forced installation of Netmeeting from the AutoCAD installation disc. Our solution at the time was to install AutoCAD on the Windows Virtual XP. The XP mode created more problems than we were able to ignore because the XP mode is very watered down and does support proper graphics for the drafting software. We decided to try another approach. Take the AutoCAD 2000 installation disc (Architectural Desktop release 3 in our case, which is based on AutoCAD 2000) and create an ISO image of the disc. I used MagicISO because it allowed me to make the image, and delete the folder for Netmeeting from the ISO image. I believe it is under Support\NM in the ISO image. Once the NM folder is deleted from your ISO image, burn the image onto a new disc. It will fit onto a 700mb disc. Then proceed with the installation of AutoCAD onto your Windows 7 machine. It worked great for me, but my colleague is still having problems. We suspect it is because he is still using the Beta version of Windows 7 64. I am using the full Windows 7 64 Professional version. We will be getting the full version for my colleague and trying the installation again. Also, my colleague tells me there is a work around to get the express tools installed. Keep checking back, we will be updating as we get new info.
Cheers,
James

I know this is an old thread, but I would really like to install acad2000 on my new laptop.
What does creating the ISO image do for you? I did this and the iso doesn't automatically load or anything. I can try to run the setup copied to the ISO disc, but it does the same thing as the autocad installation disk. I get the error stating it is
not compatible with my version of windows. I'm trying to install acad2000 on a windows7 pro 64bit machine.
Any help on this is greatly appreciated.
Thanks
Jason
Jason ..... obviously you're not the only one reading this after it became an OLD thread!
Go back in this thread (up above, that is) and find the response by -James on Tuesday, January 05, 2010 at 4:58 PM. I'll repeat his instructions here.
1. Open the ISO file with MagicISO.
1B. Look for folder \Support\nm. Remove the "nm" folder.
2. Go ahead and install the software with Full/complete installation. The installation may fail on you near the end.
If it fails....
3. Put your install disc back in the drive (the one you burned, the ISO disc), and choose uninstall from the menu. After it unistalls, reboot your machine.
4. Now put the disc back in again, and redo your full/complete installation. It should work this time. (We have done these steps about 5 times on 2 seperate machines to verify it works because we have many machines that need to transition
at some point...) If it fails a second time, try steps 3-4 again. If it fails a third time, let me know...
Jason, IF you have returned to this forum, from there on you're on your own, unfortunately!
Hope this helps .....

Improper Installation on Windows 7 64-bit

I just got a new computer with window 7 64-bit. I'm trying to download the itunes for the 64-bit, however when the installation is complete and I go to open the itunes and it says that is was "improperly installed" and will not import or play cds.
I have tried uninstalling and reinstalling, and even completed repairs after it was installed.
I followed the instructions on apple's "installing itunes for windows" page. It said to delete the C:\users\owner\appData\"temp" folder, but Windows would not let me delete this folder even though nothing was running in my task manager.
I suppose I could pay $50 to have someone fix it, but I would rather not. Plus, it doesn't seem like a $50 problem
...Any suggestions

i just got a new pc also with windows 7 - i have not tried to install itunes yet - i posted a question also about this same topic
hope someone can help

Safe to delete files after Master Suite CS6 installation on Windows 7 , 64 bit system?

I installed Master Suite CS6 on a new Windows 7 , 64 bit system computer.
The computer has a small (120GB) SSD which has the operating system, and I'm trying to install the rest of my programs and data on larger, standard drives.
I just noticed that under C:/Users/Robert/Adobe CS6, I have a 6,504,448 KB MasterCollection_CS6_LS16.7Z file (Type 7Z File) and a MasterCollection_CS6_LS16 1031KB Application file
Can I delete the 6.5 GB 7z file or is that needed for operation?
What about the smaler one - is that for launching the applications or was that just to launch the installers?
I also have an 8.16 GBAdobe CS6 Master Collection folder on my Desktop (which is actually a 1TB regular hard drive as opposed to C:)
Inside this folder are two directories: Fonts (211 MB with lots of fonts inside), and Adobe CS6 (with subdirectories deploy; packages; payloads; resources; and a Set-up application 2163 KB
DO I need to save that folder, or was that just for installing the Master Suite?
Thanks for the help.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

EPM 11.1.1.3 installation on Windows 2008 32 bit

Hi,
getting the following errors when trying to install epm 11.1.1.3 on windows 2008 32 bit.
D:\downloads\download_location\assemblies\essbase_administration_services_webapp... Not exists
D:\downloads\download_location\assemblies\svc_client... Not exists
D:\downloads\download_location\assemblies\rmi... Not exists Result of checking assemblies: Ok Checking environment variables... Fail! Could not store dlls in enviroment variables` directories. Try to point them to directory only with ASCII symbols in path.
Failed!
Some of preinstall checks failed. Correct it and rerun installation.
Writing logs to "C:\Users\xzqk7q\AppData\Local\Temp\installTool-install-stdout.log" and "C:\Users\xzqk7q\AppData\Local\Temp\installTool-install-stderr.log"
Any help appreciated.
Thanks
Srinivas

Hi,
11.1.1.3 is not officially supported with windows 2008
11.1.2 is the first release that is supported for windows 2008.
There may be patches in the future for 11.1.1.x which allow windows 2008
Cheers
John
http://john-goodwin.blogspot.com/

JDK installation on Windows 8, 64 bit OS

Similar Messages

Maybe you are looking for