JDO76519: Failed to identify vendor type for the data store
I tried to run an application using CMP on Sun Application Server rel 8 and received the above message.
I used to run it OK on Release 7 . Data base is used is PointBase bundled with the server.
Would you help?
Thanks a lot.
Can you turn on the logging level to its finest and post it
Similar Messages
-
"failed to get function context for the data region"
Hello,
Is it possible to use {function::} inside a spry:when? It works, but it also shows an error:
"getValueFromDataSet: Failed to get function context for the paceSetter region."
excerpt:
<div spry:choose="spry:choose">
<div spry:when="'{function::diff4700}' < '0'"><span class="psNegative">{function::diff4700}</span></div>
the spry:when looks to see if the number returned by function::diff4700 is a negative number, then adds a span class to change it to red. Code works the way I want it to, but can't make the error message go away.
thank you for any assistance or ideas to make error go awayHello,
Is it possible to use {function::} inside a spry:when? It works, but it also shows an error:
"getValueFromDataSet: Failed to get function context for the paceSetter region."
excerpt:
<div spry:choose="spry:choose">
<div spry:when="'{function::diff4700}' < '0'"><span class="psNegative">{function::diff4700}</span></div>
the spry:when looks to see if the number returned by function::diff4700 is a negative number, then adds a span class to change it to red. Code works the way I want it to, but can't make the error message go away.
thank you for any assistance or ideas to make error go away -
What is the data type for the Data Dashboard XY Graph?
Hey all,
I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
What gives? Am I missing something obvious? Thanks for the help!!
Tom
Solved!
Go to Solution.Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics. -
Incorrect MIME type for XML Data Connection POST requests
It appears that Xcelsius 2008u2019s XML Data Connection logic does not specify the correct MIME type for the data it sends to the server in its POST request. Using an HTTP debug proxy, I was able to see that Xcelsius sends XML data in the POST, but is setting a content-type of u201Cx-www-form-urlencodedu201D. According to the W3C spec:
http://www.w3.org/TR/html401/interact/forms.html#h-17.13.4.1
Data sent with a MIME type of u201Cxxu201D should be encoded as key?value pairs, like this:
key1=val1&key2=val2&Submit=Submit
So, what Xcelsius is doing is clearly incorrect. Worse, if your server process is a Java servlet, you may find that the POSTed data will be gobbled up by the servlet container and you wonu2019t be able to read it using a getInputStream(), or getReader() call because itu2019s already been processed by a call to the getParameter() method.
The correct mime type for POSTing an XML formatted request from Xcelsius should be "text/xml".
WayneHi,
The Error #2032 your getting is due to the Flash player security.
To remove this this error you need one crossdomain Xml file in the root directory which actually provides a lot more control over who has access to your data from a SWF. The cross domain policy is attached as crossdomain.xml.
In the XML file, it is used a wildcard (*). This allows a SWF located on any machine to access your data source. You can certainly use an IP address or domain name to restrict access rather to opening it up completely. I always start with the wildcard to make sure my dashboard works, then start restricting access as necessary.
Here is a whitepaper with everything you need to know about Flash player security:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_9_security.pdf
Please let me know if you need any more clarification.
Regards,
Sanjay -
Power View in SharePoint Server - The data extension type for a data source is not valid
Hi All,
All of a sudden I am getting following error when trying to create Power View report using shared report data source (no error testing the connection):
"The current action cannot be completed. The data extension type for a data source
'http://dev/Shared Ducuments/Sales.rsds' is not valid for this operation"
I already have a data source (I had created it after creating my site collection a week ago) and when I use this source to create Power View report then there is no error but I am getting above error when I create another similar data source and use it to create
a Power View report.
Please help me to resolve the error.
ThanksI am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'
-
Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark KamoskiHi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How I can get the Billing Type for the sales order and its items
How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?
Hi,
You need to use two tables.
First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
Then use the billing document numbers in table VBRK, where in you can get the billing document type.
Regards, -
Not possible to determine a condition type for the price in ME49
Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
UtsavHi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha -
Stock at Vendor Materialwise for the given postingdate
Hi,
I got a requirement to develop a report which lists the Stock at Vendor materialwise for the given postingdate.
How to calculate the opening & closing stock for the given date for a vendor materialwise?
Regards,
VK.Hello
MSLB - Special Stocks with Vendor
And for stock on specific date you need calculate with tables MKPF and MSEG. -
How to add a document type for the residence status GB in infotype 48
Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chrisI believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it. -
"Preview for Files Not Available" & "Failed to Find a Place for the Imported File"??
When I export RAW images into LR, some say "Preview for Files Not Available". Also, it says "Failed to Find a Place for the Imported File". Why? What can I do to resolve this
Hi,
Tried with this but still the same issue..
Stop the application services, recompile the JSP files manually, and start the application services. Check the login page then.
Note: 435550.1 - R12 Login issue on target after cloning , fresh install or upgrade
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=435550.1
Any other area to look into?
Thanks for your time!
Regards, -
When I type for example "Apple Store" I am getting something completely different, like the MBP is anticipating, any ideas, When I type for example "Apple Store" I am getting something completely different, like the MBP is anticipating, any ideas
what do you expect from this code out.print(lecture); ?
lecture is an Element, toString() is not implemented, so print correctly displays some fuzzy pointer information, nothing more... -
Output type for the tcode f.27
Hi All,
Can any body please suggest what is the standard output type for the tcode f.27(Customer Statements).
Thanks in advance,
NagendraHi Brad,
Thanks for reply.
My requirement is to get the out put of f.27 in pdf format in french or english.
Please let me know is there any FM and how to start work on this issue.
Thanks in advance,
Nagendra -
Failed to load configuration file for the workflow
There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I tried opening his workflow and got
the error "Failed to load configuration file for the workflow."
Any ideas?Hi Carltonw1,
Based on your description, I recommend to verify the things below:
Clear the SharePoint Designer cache and then open the workflow.
Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
Ask the user to create the same workflow and associated with another list to see how it works.
Check the ULS log for more detailed error message.
To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
The disc is the wrong type for the operation
Hello!
I'm using DVD Studio Pro 4 and as I try to burn a double layer DVD I get a message saying "The disc is the wrong type for the operation". I've tried several brands, but I get the same message. What can possibly be wrong?
Thanks for helping me!
/Andreas from SwedenIf you are trying to do this on the internal Superdrive they have problems writing to Dual Layer DVD disks of any make and or type.
IMHO the DVD drive Apple uses is not very good.
If this is a fairly new Mac system I suggest you take it to an Apple store and show them that it can't write to Dual Layer DVD discs of any make and maybe they will replace it with on e that will.
Maybe you are looking for
-
Product catalog from mdm to crm isa
HI MDM GURUS, COULD ANYONE PLEASE TELL ME THE STEPS TO REPLICATE PRODUCT CATALOGS DIRECTLY FROM MDM TO ISA (INTERNET SALES APPLICATION) PRIYA
-
Can't open downloaded acrobatpro11__dim?
Why can't I open downloaded acrobatpro11__dim?
-
MacBook Pro 13" (2012) non-retina ram upgrade.
Will upgrading my MBP 13" from 4GB to 8GB will make a big difference ? MBP does get slow at times and i do tend to use 4+ apps most the time. Will it boost my boot up time too ?
-
Formatting code according to Javadoc standards
Hi, I have a set of java code. I am looking for some 3rd party tool or IDE which can format my code according to java doc standards (e.g. generating method header comments, parameters, return etc.). I am trying that i dont have to go to each file and
-
Recurring for Serialized Material
Hi Our Client want a Recurring test for Serialized Material I am trying with Standard QA07 but no getting proper Result. Also unable to find the Proper solution on SCN and Other SAP site. Thanks in Advance