Je cherche driver du Marconi 2024 utilisable sous la version 6.0 et non pas sous la 6.1

Bonjour,
Je travaille actuellement sous labview version 6.0. Dans mon programme j'utilise un Générateur HF Marconi 2024 et les seuls drivers disponible fonctionnent sous la version 6.1 et donc ne fonctionne pas sous la version 6.0 je n'est pas de solution
Merci

Hello Denzel,
Unfortunately, NI does not have a LV driver for the IFR/Marconi 2024. However, there is an available CVI driver for the model. It is possible to use this driver with LabVIEW if you use the "Import CVI Instrument Driver" utility found within LabVIEW (from Tools -> Instrumentation -> Import CVI Instrument Driver). Please note, however, that this utility is a quick fix and will create a functional driver, but the driver will not exactly be "beautified."
If you choose to try this approach, the CVI driver can be found on our website at http://zone.ni.com/idnet97.nsf/browse/; then fill in the search options as:
Manufacturer: Marconi Instr. (IFR)
Additional Key Words: 2024
Instrument Type: Sources
Development Environment: LabWindows
/CVI
Driver Type: Plug and Play
Interface: GPIB
If you have any questions or run into any problems with this process, please email [email protected]
Best Regards,
Katie Rollo
Instrument Drivers/IVI
National Instruments

Similar Messages

Usb-6211 utilisable avec quelle version de Labview

Bonjour,
J'envisage d'acheter une carte USB-6211, mais je lis que l'on ne peut l'utiliser qu'à partir de LV 7.1.
Or ma version favorite est LV 7.0, pourquoi ne pourrait-on pas l'utiliser avec LV 7.0 ?
Résolu !
Accéder à la solution.

Bonjour,
Parceque la version de LabVIEW est liée à la version des drivers (DAQmx) pour piloter votre matériel.
La dernière version compatible de DAQmx avec LabVIEW 7.0 est la version 8.1 comme montré sur cette page :
Compatibilité entre les versions de LabVIEW et du driver NI-DAQ (Windows)
Et dans la version 8.1 de DAQmx, le périphérique USB-6211 n'est pas encore supporté (et ne devait pas exister à la sortie de ce driver).
Cordialement,
Da Helmut

HT1473 Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option wha

Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Erase hard drive w/o removing latest Mac OS version

I am thinking of selling my iMac 27' because I need cash money.
I downloaded and installed Lion on my Mac once I got it.
My question is,
Is there a way I can swipe my drive clean and still keep the latest version of the Mac OS installed on the drive?
also,
How do I find out which iMac model I have?
-Peace

D TiEra wrote:
Is there a way I can swipe my drive clean and still keep the latest version of the Mac OS installed on the drive?
Technically, that's a violation of the license.
When you buy a Mac with Lion installed, the license allows you to transfer it along with the Mac if you sell it. But the license for Lion purchased via the App Store or a USB stick is different. You're supposed to erase the drive, reinstall the version of OSX that came with it, and provide the original disc(s) to the buyer.
(However, if your Mac came with Leopard and you upgraded to Snow Leopard, you can install Snow Leopard and include the Snow Leopard Install disc)
Then the new user should go to the App Store and purchase Lion ($29.99).
If you don't do that, and the new user ever wants or needs to reinstall Lion, the Recovery HD won't allow it.

Hard drive broken: How do i get my version of windows 7 back?

Hello, My hard drive broke and does not work anymore at all. I guess my windows licence is still valid though, so i bought a new hard drive and i try to recover my version via windows website. After verification of my product key, they tell me to contact the builder because it was pre-installed. which i'm doing What should i do to get my version of windows back? thanks

Your currently published pages can't be opened by iWeb so your iDisk files will not work (for editing). They will still work as Web pages and you can link to them with the new iWeb pages you'll be forced to make.
iWeb uses a special folder (Domain.sites) to store your data. If you had backed this folder up you could bring it into the proper location on your new hard drive.
HD/Users/(your account name)/Library/Application Support/iWeb

My ITunes Library is on an external drive. I later installed the newest version of ITunes 12.1.0.5 and now I cannot play the music on my external dive. What to do?

I put I TUNES library on my external hard drive.
Then I installed the newest version of ITune - 12.1.0.5.
Now I can;t play the music on the external drive.
What to do?
Thanks

Thanks, Limnos,
Worked perfectly.

Comment sauvegarder les valeurs d'un utilisateur sous LabView et utilisant Teststand ?

Bonjour,
Voilà, j'utilise TestStand 3.5 et LabView 8.0, et j'ai créé un utilisateur (user1) sous TestStand, qui possède un champ appelé NbBon. J'utilise alors GetValNumber et SetValNumber pour lire la valeur du champ ou bien en ecrire une autre. Mon problème maintenant c'est que je n'arrive pas à sauvegarder ce champ !! alors comment faire ??
Je vous remercie d'avance pour votre aide.
Will W

La réponse ICI.

Comment conditionné l'entrée dans une interface utilisateur sous labview?

Bonjour,
J'ai utilisé le VI "Prompt user for input" pour demander à l'utilisateur d'entrer des données (Matricule ouvrier, numéro d'article, numéro de commande, désignation d'arcticle...) en fait lorsque j'exécute mon programme il m'affiche un msg qui me demande d'entrés ces donnés, mais le problème que si je clique sur ok on laissant des champ vide le programme passe sans afficher un msg d'erreur qui demande à l'utilisateur qu'il ya des champs vide , aussi je voudrais faire des conditions sur les entres par exemple le champ du matricule ouvrier il faut qu'il contient 4 chiffre ni plus ni moins si c'est pas vrai il affiche un msg d'erreur
merci infiniment de me répondre

Bonjour ghabri,
Pour votre application je vous recommande d'utiliser un formulaire personnalisé au lieu de "Prompt user for input" VI. C'est plus flexible. Dans ce formulaire personnalisé vous pouvez faire votre "error checking" et d'autres fonctionnes que vous avez besoin. Veuillez regardez les articles suivants pour apprendre plus sur programmation des formulaires personnalisées:
Creating Quality Dialog Boxes in LabVIEW
Two Button Prompt User Express VI Example
Modifying "Prompt user for input"
Mikhail
RF Toolkits, Product Support Engineer
National Instruments

Les serveurs DLNA ne sont plus utilisables sous Mavericks (PSM ou twonky media)

Depuis l'installation de Mavericks je ne peux plus accéder à mes serveurs DLNA (PSM ou Twonky média de orange). Pour PSM j'ai un message d'erreur de protocole DLNA qui apparait sur la PS3. Pour Twonky, il n'est même plus retrouvé en local par le navigateur safari. La désactivation du parefeu ne change rien. Avez vous des idées? Merci.

It is broken.
http://www.apple.com/support/ipodnano_replacement/

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to    *
* compile the currently running kernel. This can cause unpredictable         *
* behavior in kernel drivers and should be fixed.                             *
* gcc version: Linux)                                                          *
* kernel compiled with: 4.3.2                                                 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name        : kernel-source                Relocations: /usr/src
Version     : 2.6.27.29                         Vendor: openSUSE
Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size        : 309251954                        License: GPL v2 only
Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager    : http://bugs.opensuse.org
URL         : http://www.kernel.org/
Summary     : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
    Linus Torvalds <[email protected]>
    see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Bitlocker drive informs me I need a newer version of windows

Hi people,
I went to bed last night with a reasonably happy computer, came down this morning and one of my drives wouldn't unlock, giving me a message saying that "The BitLocker encryption on this drive isn't compatible with you version of windows. Try opening the
drive using a newer version of Windows." urm, 8.1 as far as I am aware is the newest.
Has anyone got any idea as to why and a possible solution?
Kind regards

Did this happen after an upgrade process?
You can try this fix if it will solve the problem.
http://support.microsoft.com/kb/2748266/en-us

How to set multiple home pages, the option is gone (replaced my hard drive and had to reinstall firefox) This version seems to only offer tabs, not pages?

My old version of Firefox had the option for me to set multiple home pages. My hard drive recently failed and had to be replaced, so I had to install the newest version of Firefox. The only option I see when I go to tools, options, general is to set the one home page. (and maybe tabs) I would like to open several of the same pages every time I open my Firefox. Does anyone know how to get this back, or which version had this feature so I can downgrade to that particular version?
Also, I was wondering if there is a way to get the bookmarks I had on the old version back. I think they are lost forever, but if anyone knows, I would be thankful. I do still have the old hard drive, but the way it failed was actually when you tried to open any browser, the hard drive would go and blue screen, this is why the old hard drive had to be replaced. Thanks. :)

So you mean you want to open new windows with the same page when you open Firefox?
[[How to set the home page#w_set-more-than-one-website-as-your-home-page|Set more than one website as your home page]] should help if you want to open multiple pages when you open Firefox.
As for recovering your bookmarks, you can try to plug that hard drive into a working computer, and then read [[Recovering important data from an old profile]] to copy your bookmarks from it. However, if it is failing you may not be able to do that.

How do I download Logic Pro to a macbook with no disc drive if I previously bought the disc version?

so basically i bought logic pro 9 a while ago when it came out, and i have it in disc-form. i am thinking of getting a macbook air, or the new macbook pro's which have yet to be announced that will probably have no disc drive.
how can i get logic pro 9 onto the computer without a disc drive? is there a way to input a serial on the App Store and just download it without it making me pay?
any help on this is appreciated.

You can purchase the external USB optical drive. It's an accessory purchase you can make when you buy the MBA. Or you can clone the DVD to a USB flash drive if you have a computer now with an optical drive.

My delphi code only works in DAQ driver 6.6 but not in upper version. Why?

Hi,
I'm using delphi 6 to program my application. My code was working fine if I'm using DAQ driver 6.6. Now I want to update my driver, but my code doesn't work. It doesn't work for another version of driver, except 6.6. My program will crash if not using 6.6. I'm not using ActiveX controls to communicate with the card. I'm using dll instead. I wonder is it some functions in 6.6 no longer exist in upper version. My code is in the attachment. Thank you
Attachments:
DAQInterface.pas ‏39 KB

Hello;
That is probably the case there. One thing you can do to double check if that is actually the problem is to probe each NI-DAQ function and see which one is giving you the error.
Then, you can open the NI-DAQ on line help and search for the function you used on your code. If you can't find it, that means the new version of the driver doesn't support that function anymore.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Je cherche driver du Marconi 2024 utilisable sous la version 6.0 et non pas sous la 6.1

Similar Messages

Maybe you are looking for