Je voudrais changer la langue de Acrobat Pro DC

Je installer le logiciel sur mon ordi et j'aimerais l'avoir en francais.

[topic moved to Acrobat forum]

Similar Messages

Change page size in Acrobat Pro 6.0

Hello, I'm wondering if there's a way to change page sizes in Acrobat Pro 6.0 for Windows. We are receiving manuscripts which have been assembled from various documents. They're going to be printed at 8.5 x 11, but sometimes some of the pages are 7 x 10. Is there an automated way to change all the 7 x 10 pages to 8.5 x 11? We don't want to have to do each page individually because there are too many of them.
Many thanks,
Coral

You could try printing to a new PDF with the PDF printer, setting the page size to 8.5 x 11 and setting the page scaling option to 'Fit to Printable Area'. This will hopefully leave the existing 8.5 x 11 ones about the same size (it may shrink them slightly) and scale the other sizes.

How to change PDF document dimensions - Acrobat Pro 9

Hi,
I'm trying to figure out how to change the dimensions of my PDF in Acrobat Pro.
The original artwork was created in Illustrator and the final document is primarily for screen use (not print) so was created using pixels (600x665px to be precise). However when the artwork is created into a PDF, when viewed (and printed) in Acrobat, it is rather large and I want to make this smaller.
If anyone can advise on this it'd be much appreciated!
thanks
HS

You might play with the Touchup Object tool off the Advanced Editing toolbar.
Use the tool to select the image. Any of the four corners can be "grabbed" and a mouse drag will let you change the space occupied, on the PDF page, by the image. Not a "fine control" but, sometimes, all that's needed.
Or, in Preferences > Touchup category - the associated configuration pane permits selection of an installed image editor.
Now, using the Touchup Object tool's context menu, you can use the "Edit Image..." selection.
Edit the image and return it to the PDF.
Be well...

Is possible change the title with Acrobat Pro 9?

Hi,
I'm using Acrobat Pro. 9, and i'm programing with C#.
My question is: Is possible change de title in a pdf?
I'm using this two metods and nothing the nothing, the title no change.
---- 1 form ------
PdfStamper pdfStamper = null;
pdfStamper = new PdfStamper(pdfReader, pdfOutputFile);
System.Collections.Hashtable info = new system.Collections.Hashtable();
info["«Title»"] = "";
pdfStamper.MoreInfo = info;
--- 2 form -------
Object ObjTitle = pdDoc.GetInfo("Title");
titulo = Convert.ToString(ObjTitle);
ObjTitle = "";
Regards,
Toni.

It is possible with the Acrobat SDK. You seem to be using iTextSharp, which is not an Adobe product, so you would probably get a faster response on forums that deal with iTextSharp.

Can i Chang PDF file using Acrobat Pro (CS5)?

Can i manipulate a PDF file - Delete elments, or delete elements with backgroung without changing the beckground?
TNX
Gadi

It depends a lot on how the file was created. If it's a scan, for example, then your editing options are very limited.
In any case, I recommend you upgrade to the latest version (Acrobat XI), where the editing tools are much more powerful than in previous versions.

Change in page extraction - Acrobat Pro XI

The means to extract pages has changed recently. It no longer appears under tools. Now it is located over the page thumbnails. Can you give me information on when this changed? Was there an automatide update that caused this? I am using another software that uses Acrobat extensively and it is having problems reading files I extract. Last week (Mar 9, 2015) it was working fine. This week (Mar 16, 2015) it is not. Any ideas?

Hi, Anubha,
Thank you for your reply. I will admit that I am a complete novice at this point.
I have pdf files of a parts manual. They include graphics and tables. I need to convert these files to Excel. I do this on a regular basis. Sometimes Acrobat works like clock work, but this file is proving to be an ugly exception.
I have not been able to get an acceptable result from Acrobat XI. I can understand it not being able to translate diagrams to Excel, but the tables are coming in as jibberish. For example, a list of part numbers will show up in one cell from one table and then be nicely one part number per cell on the next. Then sometimes part numbers show up in one column and then another on the next table. Table headers and various combinations of cells are merging across 2 or 3 cells. Sometimes the information shows up all in one column. And my personal favorite, information shows up as some sort of sanscrit from 400 BC.
Since I am converting manuals with 1200 pages, this is very annoying. I have also tried breaking up the files into smaller 50-100 page increments with no improvement.
This has led me to look to other software. The other software was working like a champ the first week, but then it started to fail this week. I had noticed that my Acrobat XI had changed the way I navigated to extract files and wondered if it had updated. My thought was that there was some sort of incompatability between the updated Acrobat and the other software. After much more investigation, the problem seems to lay in the other software.
I am getting quite desparate at this point. I still have 200 pages to do on this particular book and dread having to drop down to typing in tables by hand.
If you would be willing to work with me to try to get Acrobat to work, I would be appreciative.

Change reading option in Acrobat pro 7 not accessable.

I'm trying to change the reading options in my acrobat document in Acrobat pr 7 for mac, but the "Change reading option" under Advance is not "clilckable".
What can I do?

You could try printing to a new PDF with the PDF printer, setting the page size to 8.5 x 11 and setting the page scaling option to 'Fit to Printable Area'. This will hopefully leave the existing 8.5 x 11 ones about the same size (it may shrink them slightly) and scale the other sizes.

Prevent changes if opened in Acrobat PRO

Can I prevent a user from making changes to a pdf file if they try opening it in Acrobat professional?
Thanks!

Let's see you could sit behind them with a huge mallet...
On the serious side, there is password protection for which there are third party programs (some free and some commercial) that will remove password protection quite easily.
There is a digital rights management solution. This is a costly server based solution. Can you say, a minimum of 5 figures and per use charges.
I recommend that most people give up on preventing people from changing files, it is like trying to catch the wind. Just digitally sign the file, then if the file is changed there will be evidence of the change.

Acrobat Pro 9 - Crashes when trying to change Postscript Prefs

Hello all,
I have Acrobat 9 on an Apple Xserve running 10.7.5. I need to change the way Acrobat handles conversion from PDF to PS as the default is PS 2 not 3 plus other changes ...
When I try to access the panel the app freezes and the crashes ... If i try to access other Convert from PDF prefs in the same window it doesnt crash.
Partial error log ...
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
    __TEXT                 0000000000001000-0000000000003000 [    8K] r-x/rwx SM=COW /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
Application Specific Information:
objc[2891]: garbage collection is OFF
Performing @selector(handleAction:) from sender UIT_NSButton 0x4e5a790
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.CoreFoundation                0x9a183a69 CFURLCreateStringWithFileSystemPath + 265
1   com.apple.CoreFoundation                0x9a18394d CFURLCopyFileSystemPath + 45
2   AdobeAGM                                0x7e728e70 PPDList_MacOSXCompressed::GetPPDFiles() + 592
3   AdobeAGM                                0x7e8a2cd8 PPDListCache::GetPPDList() + 164
4   AdobeAGM                                0x7e5ecaaa PrintSession::GetAvailablePPDFiles() + 18
5   AdobeAGM                                0x7e7246db PrintSession_Mac_Carbon::GetAvailablePPDFiles() + 37
6   AdobeAGM                                0x7e5ed9de _AGMPrintSessionGetAvailablePPDFilesProc_GetAvailablePPDFiles(AGMPrintSession*) + 40
7   com.adobe.Acrobat.framework             0x80a1b02c 0x7feb8000 + 11939884
8   com.adobe.Acrobat.framework             0x80044df7 RunAcrobat + 1615997
9   com.adobe.Acrobat.framework             0x80045c1f RunAcrobat + 1619621
10 com.adobe.Acrobat.framework             0x8001a1de RunAcrobat + 1440868
11 com.adobe.Acrobat.framework             0x8001fcac RunAcrobat + 1464114
12 com.adobe.Acrobat.adm                   0x0ca504f8 ADMSpace::UITWindowAdapter::CreateWindowForDialog(SPPlugin*, char const*, long, ADMDialogStyle, long (*)(_Opaque_ADMDialog*), void*, long, OpaqueWindowPtr*) + 574
13 com.adobe.Acrobat.adm                   0x0ca505cc ADMSpace::UITWindowAdapter::Modal(SPPlugin*, char const*, long, ADMDialogStyle, long (*)(_Opaque_ADMDialog*), void*, long, OpaqueWindowPtr*) + 68
14 com.adobe.Acrobat.adm                   0x0ca98272 ADMUITConversionSuiteImp::ModalUITWindow(SPPlugin*, char const*, long, ADMDialogStyle, long (*)(_Opaque_ADMDialog*), void*, long, OpaqueWindowPtr*) + 66
Alternate user tried but no luck and full uninstall of whole suite and reinstall of CS4 also has not worked.
Any suggestions appreciated.
Mitch

Found this in answer to a similar issue regarding crash on print. And my issue has been resolved ...
To avoid this crash try this workaround.
remove adobe PDF PPD from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Mitch

When creating a PDF in Acrobat Pro it seems to change my reference numbering system???

I am trying to create a PDF file using Acrobat Pro trial version (before I buy it I need to know if it works for me). The file I am using is a condensed version of a report so it has some of the tables/figures omitted and therefore the numbering sequence isn't sequential ie. it can jump from Figure 9-2 to 9-4. For some reason - when creating the PDF - the program is CHANGING the numbering system of the original file in the body of the document - but the Table of Contents keeps it how I had it. HELP??!!! How do I make it just create the PDF exactly how it is in the Word document file without automatically making any changes like that to it?!
I have tried several ways to create the PDF - in Word - I tried doing it as a Print command, also in Word I tried doing it from there, also I tried creating it from a file right in Acrobat Pro. I also tried "protecting" the document first - but this didn't work either.
Thank you so much to anyone who can help!

You might want to specify what kind of graphics are giving you problems.
Frame drawings or imported files? If imported, what file type? RGB or
CMYK? Any spot colors?
The best graphics are EPS because FrameMaker passes them around the
Windows GDI unchanged and EPS files can retain spot colors, too. Other
types of graphics get passed through Windows GDI and converted to RGB
where the result can sometimes be astounding. In Save as PDF, what's the
setting for "Convert CMYK colors to RGB?"
Check also "GetLibraryColorRGBFromCMYK=" in maker.ini and change it from
"Printing" to
"None". That seems to get the best results for having what you see on
screen match what ends up in the PDF.
There are also color management settings in your Distiller .joboptions
file that can affect the result. Usually, you want to set Settings>Edit
Adobe PDF Settings> Color> Color Management Policies to either "Leave
Color Unchanged" or "Tag only Images for Color Management."

Change the .tiff extension to .tif as a default in Acrobat Pro 9?

I work in the legal industry and we use Acrobat all the time to convert PDFs to LZW compressed B&W Tiff for use in trial presentation software. Lately, we've noticed that Acrobat Pro 9 is saving the files with a .tiff extension rather than the .tif extension. The ".tiff" extension might be great for Mac, but we're in a Windows environment and we bought Acrobat Pro 9 for Windows - not Mac. This is a problem because the Windows software that we are using, TrialDirector 5.2, only accepts a .3 extension such as .tif, .jpg, etc.
I've experimented with this issue and can't resolve the matter on a permanent level. It appears to be a random occurrence and I can't tell if it's because some PDF files are optimized and others are not or what the secret formula to this is. Even in a batch process, some will be saved with a .tiff extension and others will have a .tif extension. If I change the extension to .tif in the file name during a "save as" the program will continue to save it that way as long as I don't exit the program. Once exited, you have to open Acrobat again, "save as" ".tif" - it may save it that way, it may save it as .tiff, but after deleting the .tiff files and doing a "save as" or batch process again, it will usually save the files with a ".tif" extension.
Is there a preferences file somewhere in Acrobat or Distiller that can be edited manually, that will keep the extension to ".tif" rather than ".tiff"?
I really want to avoid having to use a bulk rename utility for the thousands of documents we process considering Acrobat 8 didn't have this problem.

Bumping this thread up in hopes that someone will have an answer.
I absolutely hate the fact that Acrobat 9 insists upon using ".tiff" rather than ".tif" under Windows 7.
This creates problems when existing TIFF files are linked to other publications and all I want to do is change some information in the PDF file and re-export, and instead of overwriting the existing .tif file, it creates a .tiff file which is a distinctly different file, and is not the one being linked to.
Help?

Change order in Acrobat Pro XI pdf portfolio

I can't seem to change the order of my portfolio in Acrobat Pro XI. My portfolio layout is Click-Through. When I drag an item on the mini-navigator bar at the bottom and move to a new spot and let go when I have the vertical insertion line, the item doesn't move and bounces back to original spot. Can anyone help me, please!

I'm having the same issue. Once files are in the portfolio, Acrobat XI will not allow me to click and drag them to a different order. I despise Acrobat XI.

Can't Change Type In Acrobat Pro 9

Have been doing some research on how to change type in Acrobat Pro 9. Was told to Choose View >Toolbars > Properties bar. When I do this a Properties box appears but a message reads "no current selection."

cancer64 wrote:
Have been doing some research on how to change type in Acrobat Pro 9. Was told to Choose View >Toolbars > Properties bar. When I do this a Properties box appears but a message reads "no current selection."
If your inside a PDF document first click on Touch up tool then mouse over item to change the choose properties. Then click on fonts and choose desired font.
If you want to change fonts used to create fonts:
Preference > new Document.

How do I change the default PDF reader from Acrobat Pro to Preview?

Right now Acrobat Pro is set as the default PDF reader in my Safari 3. It's slow and wonky, which I think might be a 10.5 issue. Anyway I'd like to make Preview my default PDF reader for Safari but I can't find where to make this change.

Hi Harry
You may also have to remove the Adobe PDF plug-in(s) from your Internet Plug-ins folder. If so, create a new folder in the Library where the Internet Plug-ins folder is located, calling it Internet Plug-ins - disabled. Move the file(s) to there. This way, if you need to use Adobe again, it's as simple as moving the file back, then reselecting the option in the Adobe app.
After so, restart Safari and try a PDF.

Acrobat Pro 6.0 - Text Box Properties: How-to change font / default

Inserting text box into an existing .pdf opened in Acrobat Pro ver. 6.0
Need to change font size to smallest. Right-clicking on field to open 'properties', clicking on 'Appearance' tab, BUT there is no choice for 'font'.
HOW DO I...change the font size in a text box?
HOW DO I...set the default to that font/size/color/border/fill?

You need to have the Properties Bar open (Ctrl + E), double-click on the text so you can select some of it, and you should see where you can specify the various font properties.
George

Je voudrais changer la langue de Acrobat Pro DC

Similar Messages

Maybe you are looking for