JECS Change but JA1X not changed while mauually change Ex Duty in Pri. Pro

Dear Gurus,
While creating a Sales order when we put manual Excise Duty i.e JMAN, the condition type JECS i.e. 2% is changed but the condition type JA1X i.e. 1% is not changed
Please suggest me
Ex
Basis Price 1000
ED 10% = 100
JECS 2 % = 2
JA1X 1 % = 1
But when we change it ED manual 20%
ED 20 % = 200
JECS 2 % = 4
But JA1X is not changed it show only 1, it should 2
so how i can solve this

Hi,
If you want to change the price or tax for any condition type manually in sales order conditions tab.,
in v/06 condition type defination Changes which can be made Tab should be "C"- Manual has priority.,
Hope it helps.
Regards
Ramesh.

Similar Messages

Battery charges when asleep but will NOT charge while awake

Hello -
By battery will charge when off/asleep but will not charge while awake. It just slowly drains to nothing and dies even though adapter is plugged in. magsafe adapter light is green when open/on and orange when off/asleep and lights on battery indicate charging while in the latter state. still using stock battery that came with computer when I got it a few years ago, so it's not new by any means, but when fully charged lasts as long as it used to. I would think maybe charger is issue, but it DOES charge, just not while awake. not sure why computer wouldn't still work correctly while plugged in if in battery indicator it says power source is "power adapter," but its not. I have tried resetting PMU and calibrating battery. the combo of the two seemed to work when having issue a few months ago, but it just started doing it again. frustrating because once it dies I have to wait several hours until its fully charged again, so it cramps the workflow... any ideas? battery info from profiler below.
Cheers,
Ian
Battery Information:
Model Information:
Serial Number: DP-ASMB013-3556-2063
Manufacturer: DP
Device name: ASMB013
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0300
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 81
Fully charged: No
Charging: No
Full charge capacity (mAh): 4571
Health Information:
Cycle count: 827
Condition: Good
Battery Installed: Yes
Amperage (mA): -1134
Voltage (mV): 10921
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No

Scott - Your answer ultimately led me to the answer, albeit months later, after much internal deliberation and some trial and error... thanks!
Ruled out battery (as crazy as that sounds - it's had a bajillion cycles) as it didn't make sense that battery would charge but wouldn't work while awake. I have a friend whose battery is completely shot and his still works as long as magsafe is plugged in, and mine wouldn't even do that. tried another adapter and that worked. then tried mine in a different plug. so in the end, turns out I had a bum powerstrip... mag safe / battery recharge works properly when just plugged in somewhere different.
So no need to buy a new charger or battery (yet!)
thanks to all,
Ian

Multi object not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Subject: Multi object not exported while clicking Edit Object in “Acrobat X Pro to Photoshop CS5”
I unable to get all selected object (images) which from Acrobat X pro to Photoshop CS5, I getting only one image.
It was working fine when used Acrobat 6 & Photoshop CS.
Also I ensured Preference setting as shown below:
Kindly let me know the solution, it should helpful.

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

TS4268 I can use facetime on my I phone 4S but can not complete registration procedure to activate on my Macbook Pro

I can call using facetime from my Iphone but can not from Facetime of my Macbook Pro. I can sign in there , but aftyet that it says a server error occured during the registration process.

You posted in the iPad forum instead of the MBP forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
 Cheers, Tom

Can use facetime on my I phone 4S but can not complete registration procedure to activate on my Macbook Pro

can use facetime on my I phone 4S but can not complete registration procedure to activate on my Macbook Pro

Hey Yusuf Hassan,
Thanks for using Apple Support Communities.
This article should be able to get you to activate on the Mac.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Activating FaceTime for Mac
Use your Apple ID to register and use FaceTime. FaceTime registration validates your Apple ID and email address for use with FaceTime.
If you are unable to activate FaceTime, try the following:
Sign in to FaceTime for Mac using a valid Apple ID. After you validate the email address for use with FaceTime, other FaceTime users can connect to you using that email address. If you encounter issues registering or using an Apple ID account:
Ensure that you have an active Internet connection.
Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Check that your email address is verified in FaceTime > Preferences.If FaceTime > Preferences shows your email status as "verifying," follow the instructions in the verification email that was sent to complete the process.
Toggle FaceTime off and on in FaceTime > Preferences.
If still unable to Sign In follow the instructions in FaceTime, Game Center, Messages on OS X: Troubleshooting Sign in
Have a nice day,
Mario

Multiple object is not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Can you help someone to get multiple object using "Edit Objects" from "Acrobat X Pro" to "Photoshop CS5"? Refer below:
Selecting the multi object (Acrobat X Pro):
Click Edit Objects => Displays below option, click OK:
Opened only one object instead of above multiple selected - in Photoshop CS5
Thanks in advance,
Pasumalai J

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

HP PAVILION G6-2229TU LAPTOP HDD NOT DETECT WHILE OS INSTALLATION

Sir
I have hp pavilion g6-2229tu laptop, i am formate and reinstll operating system win7 but hdd not detected while installation select the driver to be installed page are come not showing hdd how to install os, pls help us

Restart windows setup and see if your problem was solved
If your problem doesn't solve after restarting your pc then on the select drive to install windows page press
Shift key + f10 then now Command promopt was opened then type "Diskpart" Now new window was open then type "List disk"
Now If there you will see your Hard disk drive then try the following
type "select disk 0" (0 is your disk number replace 0 with your disk number as shown in window)
now type "clean" Please note Clean command was format your hard disk completely with recovery drive Now type "convert to MBR"
now try to install windows again and see your problem was solved
Enjoy

MAC 10.6.8 not downloading CC InDesign. I was told my system would support it, but its not DLing

MAC 10.6.8 not downloading CC InDesign. I was told my system would support it, but its not Downloading.
I have to update my MACBook Pro and I backed up my Adobe Programs on an external drive. Long story short None of my Adobe programs are working any more and I don't have the License number - So now I have to Pay Monthly to use InDesign.
I called your help line and was told MAC 10..8 would support CS6 and CC. Im trying to DL CC and it's not working.

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

While playing my albums in iTunes it has just started playing the first song but will not progress through the other songs on the album. Did I accidentally change setting or are other people having the same trouble? thanks

While playing my albums in iTunes it has just started playing the first song but will not progress through the other songs on the album. Did I accidentally change setting or are other people having the same trouble? thanks

Hi there Sing Me A Song,
You may have changed the Up Next list in iTunes. Take a look at the article below for more information on the Up Next lists and how to edit it.
iTunes 12 for Mac: Play songs
-Griff W.

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

Your Changes were saved but could not be uploaded because of an error

Hi, some times users getting below error while doing check in the documents in SharePoint 2007 sites on their PC:
Your Changes were saved but could not be uploaded because of an error...
I have two WFE servers in Farm: first WFE host name is mydms01 and another WFE host name is mydms02
And we are using NLB URL to access the sites, NLB name is myworld.
Please guide me

Here is your answer, Microsoft changed the way webdav and other files are uploaded,
Office 2010 upload manager is designed to work with Sharepoint 2010 not reverse.
But this is how you fix the tool to work with Sharepoint 2007.
IIS 6.0 Do this
Go to the site on each server if you are a farmed environment.
Locate the Web Application supporting the site and add a custom header to the site.
Add the primary url of the site into the custom headers,
http://site.name.com
and click ok.
No need to restart IIS and it will not impact your services.
IIS 7.0 do this
To resolve the issue, perform the following procedure:
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Note: - This does not interrupt any functionality of the same server, as it just allows Custom Headers, if any, for any request towards this server.

BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO

Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadish

hello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

JECS Change but JA1X not changed while mauually change Ex Duty in Pri. Pro

Similar Messages

Maybe you are looking for