JEditorPane Change proportion Size

I need to be able to display a html page in a JEditorPane and make sure is has the same propertion as a Internet explorer.
Here is whats happening, when I display the same page on iNTERNET Explorer it displays correct proportion.
When I display the same page on a JEditorPage the proportion changes.
I need some help please.

> I need to be able to display a html page in a
JEditorPane and make sure is has the same propertion
as a Internet explorer.
You're probably not going to have much luck with this, if by "same proportion", you mean "JEditorPane renders output to look exactly like Explorer".
~

Similar Messages

Can I change the size of a jpg in another jpg?

I have PSE 9 on XP with SP3.
My wife has a business card as a jpg.
On the right side of the card is a picture of a painting of a dog she did.
She wanted to change that picture.
So I used the Rectangular Marquee Tool to select the existing image and then deleted it.
Then I opened the new jpg in a second PSE window.
Did a Select/All.
Switched to the window with the card.
Did a Edit/Paste Into Selection.
Well, the new image went right into the spot where it should.
But I need to change the size of it so that it will fill that entire selection.
Right now it seems to be centered in the selection and about 1/2 the size I need.
Any ideas on how I should proceed? Or a better way to do this from the start?
Thanks!

Click on the move tool to drag your image into position.
Use the corner handles of the bounding box to scale - hold down the shift key to maintain proportions.

PDF Changing JPEG size

Is there a way to stop my jpegs from changing size? I have them at 8.5 by 11 (300 dpi) before converting and now they are 35.42" by 45.83 (100 dpi) and these are not the proper size to send to commercial printer? Is there a way to keep this from happening?

Thanks very much. Yes, command-i is helpful when you just need to know the size of the file.
Here's what I use it for: I need to make all images under 250KB to post to a particular website. I do this all the time, but all the images start off in different quality, resolution and size because they're all from different sources. I don't want to change proportions, image size, or resolution -- just the file size (quality slider).
So I used to click through them all, one by one, in Preview, and "save-as." I slide the quality slider down for each successive image until the file size is just under 250KB, then I save it.
Without this feature, I have to do a trial-and-error for each image, then "command-i" each one. Some end up over 250KB, some too far under. So I try again on perhaps 90% of them, trying to remember which were too big and which were too small, and over and over again, getting just a few right with each pass, until all images are about the correct size.
Something that used to take 5 minutes (for, say, 50 images) now takes -- no joke -- two hours.
It doesn't seem possible that Apple really eliminated this feature -- and for what reason?
Anyway, thanks for your reply. Much appreciated.
If there is a good workaround in Preview I would love to know it, and I would be VERY GRATEFUL.
My productivity at work just dropped about 95%.

Illustrator change color, size & direction

Please. I am 45 and at ground level. Can someone tell me how to change a vector image (flourish) I downloaded from istock photo. I was able to open it with Ai but I don't know how to change the size, direction and color. Please help. Thanks!

If it is a vector image:
Size: Select what you need to size with the selection tool, then drag and hold the shift key to resize (holding shift keeps the proportions). OR Select the object and go to Object>Transform>Scale.
Direction: Select the object, slightly outside of one the corner points you will get a double arrow and you can then click and rotate. OR select the obejct and go to Object>Transform>Rotate.
Color: select with the Direct Selection arrow one portion of the color, go to Select>Same>*then select fill or stroke*. Then go to your color pallet and select the color you want to change to.

How to change font size in iCal

How do I change the font size in iCal? When I go to print the monthly calendar, it is so small I can't read it. But for the life of me I can't find where to change the size!

earlnkids,
The text size selection should be available in the first page of the iCal print options:

Can't change paper size in Print module

When I click on Page Setting in the Print module I get a pull-down menu that has options for Printer, Presets, Layout, Pages per Sheet, Layout Direction, Border, and Two Sides but there is no option available for changing paper size. This was not a problem before I updated to 1.2. How do I get that option back? Thanks.

Have you downloaded and installed the latest Driver for the Epson R1800.
It has been said that it is best, even if you have a ppc to download the latest IntelMac Driver to install for that printer, for best results.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

How do I change text size in auto-page tabs

Now I'm trying to make the page tabs fit across my page. I've got several pages and will probably have more. I don't want all of them on the bar as they'll be linked in my text. I would also like to make the text smaller and maybe reformat to another font or style.
I don't find anything on this but maybe I'm not searching the right terminology.

You're referring to the navbar. You can remove any page from the navbar by going to the Inspector/Page/Page pane while viewing the page and unchecking the box to include that page in the navbar:
To change the font size of the navbar text see this post by Cyclosaurus: How do you change the size and font of...: Apple Support Communities.
Wyodor also posted a way to change the font size: Darkroom Navigation Font Size: Apple Support Communities.
If you only have a couple of pages you can create your own text based navbar and complete control over the font, size, rollover color, etc. This demo page has an example: Text Based Navbar. Be sure to use Web Safe Fonts.
OT

How Can I Change the Size of My Home Page So That It Fills the Screen?

I have a PowerBook G4. Up until a couple of weeks ago when I opened Safari the home page filled the screen. Something has happened and now it fills only a portion of the screen. I can move the page around, change the size slightly by using the green button next to the minimizing button, but nothing I do will enlarge it to fill the screen. I have gone to View and Preferences, but find nothing to resolve this. Please help!

You're welcome Maureen. Glad I could help.
Thanks for the and Aloha from Big Island.

How do I change the size of a windows partition on my MacBook?

How do I change the size of a windows partition on my MacBook?

CampTune $19 from Paragon-Software is your best bet.
http://www.paragon-software.com/mac/

What is happening when I change the size of the image in the program sequence window?

I noticed that I can change the image size of my exported file. I imported a 720 x 480 DV file into CS5.5. I went to my program sequence window and changed the settings to show the smallest image in that window. I then clicked on the image and used the handles that appear to make that small image large enough to nearly fill the screen. When I exported my final file and played the resulting WMV, the image on my screen was nearly twice as large as it would have been if I had not previously altered the image size in the program sequence window. I had to do this alteration for each clip in my timeline, or the unaltered ones would stay at the smaller size. The quality did not seem to be significantly impaired. I learned about this on a youtube video. The person who did the video claimed that this was a simple and quick way to upgrade standard video to HD. Of course this is not true. He was only changing the size of the resulting video. Does anyone know what is really happing when you do this procedure and why it changes the size of the exported video?

The size (resolution) of the exported video is not affected by anything you do while editing. It is dependant solely on the resolution set in the export settings.
Ideally you want to edit in an sequence that matches your media\, which will be the same size or larger than the required export. In other words, the same or smaller is OK. Making things bigger in post is not the best option. If you need things bigger, shoot them bigger.

Troubles by changing the size of a bookmark header text Repot generation Toolkit

Hello everyone
I'm having troubles getting the size of a header text formatted into a different font size, I attach the code I'm using to get the work done.
At the end I get all I want from the report generation toolkit but the text size in the header and footer . Does Anyone have a clue?
Well the image is too small I'm getting an error when I try to post a bigger one. The thing is that the VI's used here to change the size are append report text.vi and format text.vi. The first one is used to insert text through bookmarks in the header and footer (it works just gereat) and the second one is intended to change the size of the inserted text (it doesn't work at all) I've already used shift registers in the for loop but I get the same results. The last VI is dispose report.vi
thanks in advance
Attachments:
Maquina Etdos Verifica Reporte.vi ‏94 KB

Hello Julio9,
sorry for the waiting I had to clean the block diagram up and take into account some data security issues before I could post the information you asked me to. I have to tell you that I already came out with a patch for the issue nonetheless it is not the correct way to solve it and I would appretiate if you or anyone else could help me to do it right.
Here is what I changed:
In my code at the Initialize state (within the state machine) there is the New Report.vi I opened it to get also the new report SubVI.vi opened, afterwards I selected the NI_Word.lvclass: new report subvi.vi and opened it in its code yoou can easly see the double numeric constant value for the size of the text inserted as default. I just changed it from 12 to 8 to correct the formatting. As the outcome all the text inserted through the bookmarks have the default size (8 pts).
I attached the new version of my code with all the documents you will need. Please follow these steps:
1.-Open the project named Verifica Temperaturas 2010.lvproj
2.-Run the main vi named Maquina Etdos verifica reporte 2.vi
3.-Check the option Laboratorio de Refrigeradores:
4.-Click OK
5.-Complete the information as shown:
(For Selecciona Machote pick the word document named Document.doc attached in the .zip file. For the Selecciona Archivo de temperaturas pick the Estacion1_21-02-2012.txt file also attached in the .zip file)
6.-Press Siguiente
After completing the steps you'll see how the document in created. As expected the size of the text in the header is 8 pts.
Attachments:
Verificacion_Camaras.zip ‏359 KB

Changing the size of a JComboBox

Greetings,
I am trying to build a mechanism to perform zooming on a JPanel with an arbitrary collection of components (including nested JPanels). I've tried a number of things with little success. The following is my most promising contraption. It can zoom labels, textfields, checkboxes, and buttons. However, for some reason, the combo box refuses to accept a changes to its size. I'm not sure why this is the case. Its font changes size appropriately.
Anyway, I'm running in JDK 1.4, and the following program lays out a palette of components. To change the size of the components, hit F1 to zoom in, and F2 to zoom out.
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.KeyEventPostProcessor;
import java.awt.KeyboardFocusManager;
import java.awt.event.KeyEvent;
import java.awt.geom.AffineTransform;
import javax.swing.JButton;
import javax.swing.JCheckBox;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTextField;
public class Demo extends JPanel
    public class Zoomer
        private double m_zoom = 1;
        private JPanel m_panel;
        public Zoomer(JPanel panel)
            m_panel = panel;
        private AffineTransform getTransform()
            return AffineTransform.getScaleInstance(m_zoom, m_zoom);
        private Font transform(Font font)
            return font.deriveFont(getTransform());
        private Dimension transform(Dimension dimension)
            Dimension retval = new Dimension();
            retval.setSize(dimension.getWidth() * m_zoom, dimension.getHeight() * m_zoom);
            return retval;
        private void performZoom(Container container)
            Component[] components = container.getComponents();
            for(int i = 0; i < components.length; i++)
                Component component = (Component)components;
component.setFont(transform(component.getFont()));
component.setSize(transform(component.getSize()));
for(int i = 0; i < components.length; i++)
Component component = components[i];
if(component instanceof Container)
performZoom((Container)component);
public double getZoom()
return m_zoom;
public void setZoom(double zoom)
if(zoom > 8.0 || zoom < 0.125) return;
m_zoom = zoom;
performZoom(m_panel);
public void zoom(double factor)
setZoom(getZoom() * factor);
public Demo()
JPanel panel = new JPanel();
panel.add(buildPanel());
panel.add(buildPanel());
final Zoomer zoomer = new Zoomer(panel);
add(panel);
KeyboardFocusManager.getCurrentKeyboardFocusManager().addKeyEventPostProcessor(new KeyEventPostProcessor()
public boolean postProcessKeyEvent(KeyEvent e)
if(e.getID() != KeyEvent.KEY_PRESSED) return false;
if(e.getKeyCode() == KeyEvent.VK_F1)
zoomer.zoom(1.2);
if(e.getKeyCode() == KeyEvent.VK_F2)
zoomer.zoom(1/1.2);
return false;
private JPanel buildPanel()
JPanel panel = new JPanel();
panel.add(new JLabel("label: "));
panel.add(new JTextField("Hello World"));
panel.add(new JCheckBox("checkbox"));
panel.add(new JComboBox(new String[] { "Bread", "Milk", "Butter" }));
panel.add(new JButton("Hit Me!"));
return panel;
* Create the GUI and show it. For thread safety, this method should be
* invoked from the event-dispatching thread.
private static void createAndShowGUI()
// Create and set up the window.
JFrame frame = new JFrame("Demo");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Create and set up the content pane.
Demo newContentPane = new Demo();
newContentPane.setOpaque(true); // content panes must be opaque
frame.setContentPane(newContentPane);
// Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args)
// Schedule a job for the event-dispatching thread:
// creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable()
public void run()
createAndShowGUI();

component.setSize(transform(component.getSize()));First of all the above line is not needed. The LayoutManager will determine the bounds (size and location) of each component in the container based on the rules of the LayoutManager. The Flow Layout is the default layout manager for a panel and it simply uses the preferred size of the component as the size of the component.
So what happens is that when you change the font of the component you are changing the preferred size of the component.
So why doesn't the combo box work? Well I took a look at the preferred size calculation of the combo box (from the BasicComboBoxUI) and it actually caches the preferred size. The combo box uses a renderer, so the value is cached for performance one would assume. The method does recalculate the size when certain properties change. Note the isDisplaySizeDirty flag used in the code below:
         else if (propertyName.equals("prototypeDisplayValue")) {
                isMinimumSizeDirty = true;
                isDisplaySizeDirty = true;
                comboBox.revalidate();
         else if (propertyName.equals("renderer")) {
                isMinimumSizeDirty = true;
                isDisplaySizeDirty = true;
                comboBox.revalidate();
            }It also handles a Font property change as well:
            else if ( propertyName.equals( "font" ) ) {
                listBox.setFont( comboBox.getFont() );
                if ( editor != null ) {
                    editor.setFont( comboBox.getFont() );
                isMinimumSizeDirty = true;
                comboBox.validate();
            }but notice that the isDisplaySizeDirty flag is missing. This would seem to be a bug (but I don't know why two flags are required).
Anyway, the following change to your code seems to work:
// component.setSize(transform(component.getSize()));
if (component instanceof JComponent)
     ((JComponent)component).updateUI();
}

Changing the size of a drop down list

Hi Everyone,
Is there anyway to change the size of a drop down list? For example, our customer would like to make the drop down list for the Ship-To field on the logistics tab of the sales orders longer. Currently, they cannot see the full name when they scroll through it. Is this possible? Depending on what Customer Code they enter, the field size appears to change.
Thank you in advance for your help.
Amanda

I am using Tahoma size 10 as well.
Is the drop down size somehow related to the size of the first few records? So, if those are shorter than those at the end, perhaps it doesn't adjust for the size of the bottom records. For example, in our customer's database here's a sampling of what they have entered and the order:
Wal-Mart 6124
Wal-Mart 6125
Wal-Mart 6126
Wal-Mart 7001
Wal-Mart Supercenter 1111
Wal-Mart Supercenter 2094
Wal-Mart Supercenter 3475
The drop down box is large enough to see the Wal-Mart 6124, etc. but not large enough to see the Wal-Mart Supercenter ones at the bottom of the list (keep in mind there are over 100 ship-to's for this Business Parnter). Does it maybe only look at the first fifty records or something like that?
Thanks again,
Amanda

Changing the Size of A screen at runtime

Is it possible to change the size of a screen , just before it is called, or to move it it after it has been called.
Bascally I'm using
CALL FUNCTION 'Z_SIM_TEST' starting new task 'PDF Spools'
to create a new screen asynchronously, in a new session, and want the user to be aware that the older session is still there?
Thanks.

you can use CALL SCREEN 2009 STARTING AT x-cor y-cor ENDIGN AT x-cor y-cor to put the screen. You can change x and y coordinates.

Changing the size of a document in Pages?

How can you change the size of a document in pages? I need to change a poster size document to 8.5 x 11?

Nevermind. Found it! Sorry, new to Mac

JEditorPane Change proportion Size

Similar Messages

Maybe you are looking for