JEE WebSphere Management Pack: Issue with 8.5.5 Discovery

Is WebSphere Application Server 8.5.5 supported as a discoverable JEE Application Server within System Center Operations Manager 2012 R2? We have tried just about everything at this point....
Currently Running JEE IBM WebSphere 8 Application Server MP version 7.3.2135.0
Agent Running as Proxy
RunAs account created and bound to server
BeanSpy deployed and functioning via query.
Universal Discovery used with no success. (NewJ2EEAppServer.ps1 does not except version 8 of WebSphere).
Any help would be appreciated

Hi Deem13,
Please look at these posts:
http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2012/05/21/manually-discovering-jee-application-servers-with-scom-2012.aspx
http://social.technet.microsoft.com/Forums/systemcenter/en-US/d15bc060-a071-4063-bf5d-c4ec9f0d8cbb/jee-websphere-management-pack-issue-with-discovery?forum=operationsmanagermgmtpacks
http://blogs.inframon.com/post/2012/04/27/WebSphere-monitoring-with-the-JEE-Application-Performance-Monitoring-management-packs.aspx
Natalya

Similar Messages

JEE WebSphere Management Pack: Issue with 8.5.5 AutoDiscovery fail

Hi,
I have installed my SCOM 2012, imported JEE management pack. and we have many websphere in place. all server has configured agent running as proxy.
The websphere application server currently running version 8.5.5 but I am surprise that none of the server were autodiscovered.
We are not prepared to go deep discovery using mbeans as apps team after of performance issue and we are just pursue basic monitoring.
May I know why none of the server were autodiscovered and what need to do or check to ensure all webpshere server auto discovered.
MT | MCITP ----- Please vote helpful or mark as answer if it's answered your question, this help us follow up the question status.

Manually Discovering JEE Application Servers with SCOM 2012
http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2012/05/21/manually-discovering-jee-application-servers-with-scom-2012.aspx
For Java EE Monitoring, you can check below link
http://systemcentercore.com/?GetCategory=Java+EE+Monitoring
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Applications Management and Change Management Packs Certified with EM 10gR5

Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
For more details about the new features, documentation, and patches for the latest Application Management Pack and Application Change Management Pack releases, see:
[Applications Change Management Pack 3.0 and Applications Management Pack 3.0 Now Available|http://forums.oracle.com/forums/thread.jspa?threadID=935145&tstart=0]
Oracle E-Business Suite Prerequisites
11.5.10 with ATG_PF.H RUP5 and higher
Release 12.0.4 and higher
Release 12.1
Certified Platforms
Linux x86
Linux x86-64
Sun Solaris SPARC
HP-UX Itanium
HP-UX PA-RISC
IBM AIX Based Systems
Certification on Windows platforms is in progress.

It takes me a lof of time to comprehend the sentence you write. Cause I am a Chinese. My poor English.
I have to say "you are genius". I used to use the indesign CS2. There is no GREP function in CS2. When I get the new script, I do not know how to use it. Just when I saw the
'grep {findWhat:" +"} {changeTo:" "} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all double spaces and replace with single spaces.'
Being confused.
Thanks so much. It seems I have to relearn the advanced Indesign.

HP Storage Management Pack Conflicts with Network Monitoring SNMP

The HP Storage management pack that I installed requires starting the Windows SNMP services, which creates a conflict with SNMP used for SCOM network monitoring. I am spinning up a second SCOM mangement server so I can split these functions. What would
you recommend to split these functions across the two management servers? Uninstall the HP Storage Management Pack, and install on the new server? Or move the network monitoring to the second server?
Thank you for your help!

Does the HP Storage pack support resource pools? What I've found with these 3rd party packs that implement connector services is they do not provide true HA via SCOM resource pools - they are standalone systems with a connector service. This is true for
the NetApp (DataONTAP) pack, and it's a huge disappointment.
Vendors do this because they have an API, and they think the only way to implement discovery and monitoring in SCOM is to create a service that accesses the API - and then the service is basically a collector in this case, and typically has a handful of
rules (sometimes just one rule) that scrape events on the management server and they are misinterpreted to be alerts coming from some instance.
I turn green when I run into this type of problem, because all this can be accomplished with native modules or managed code that are designed to work very well with SCOM.
I know this doesn't answer your question - it's more a way for me to express my distain for these type of packs.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Request management service issue with SSL Sites

Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,

Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Cisco security manager deployment issue with invalid command

Running CSM 3.3.1, to manage an 800 series pre-configured router.
The router has a number of policy ACL's and class-maps configured. When the config is imported to CSM a number of warnings are seen reporting that some of the interfaces are unprotected by ACL's, which is correct, no serious errors are reported and the device is succesfully imported.
But, when I look at the configuration within CSM non of the ACL's or the class maps are shown.
Also, when I configure some feature on the router, during the deployment phase I get an error indicating that there is an invalid protocol under one of the class maps associated with an interface. The protocol in question is bittorrent. This error prevents depolyment of my changes. In fact this causes my client to hang, eventually if I close the application windoes reports that the issue is caused by javaw.exe faiing to respond.
If I take out the bittorrent protocol under the class map then all seems well.
So, I though flexconfigs would resolve this, enabling me to import the config with the unsupported command. I created a flexconfig with the class map and the invalid protocol. When I re-imported the device there is still a lot of configuration features that are on the router but are missing in CSM.
I'm not sure how to resolve this, the router was not configured through CSM in the first place.

Update to this, the CSM is also altering firewall configurations, if I import a configuration from an ASA running 8.0.4 code, then compare that configuration to that running on the same ASA there are quite a few differencies. Some of these are not items that CSM reports as requiring Flexconfig support, which concerns me.
This is not the first time I've seen this occur, customer is concerned about the reliability of the way this system handles configurations, and I cannot explain why it exhibits this process.
Anyone else seen this, and found a work around?

Work Manager Configuration Issue with SharePoint 2013

Hi,
We are facing issue to configure the Workflow Manager with SharePoint 2013.
===========================================================
Please provide any solution/inputs to resolve this issue.
Thanks.

Hi ,
According to your description, my understanding is that you got an error when you configured Workflow Manager for SharePoint 2013.
For resolving your issue, please do as the followings:
1.Start -> Programs -> Workflow Manager 1.0 -> Workflow Manager Configuration -> Remove from Farm (not to be confused with SharePoint “farm”)
2.Drop SQL databases for Workflow Manager. (SbGatewayDatabase, SbManagementDB, SBMessageContainer01, WFInstanceManagementDB, WFManagementDB, WFResourceManagementDB)
3.Start-> Programs-> Workflow Manager 1.0 -> Workflow Manager Configuration -> Configure Workflow Manager with Default Settings (Recommended)
4.Ran the wizard just like before and it should be completed successfully this time.
More information, please refer to the link below:
http://www.spjeff.com/tag/workflow-manager-1-0/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

LMS 3.2 Campus Manager Topology Issue with C450X-E

We replaced catalysts catOS 6509 by c4503-E and C4506-E in the network.
Since that replacement, 2 links gigaethernet bundled in an etherchannel disappeared from Campus Manager Topology maps (vtp and layer maps).
These links were drawn with 6509 in the old maps but not now with 450X-E.
We have also 235 other switches without any problems.
The links are up and each switch is seeing its neighbour by cdp on each link. No discrepancies found for these links.
I have done a reinit of ANI database by reinitdb.pl -restore and restart a complete discovery and data collection.
The issue is the same.
Campus Manager Version is 5.2.1 with CSCtd49439 installed
CMDeviceUpdate Version is 13.0
C450X-E IOS version is 12.2(53)SG2
In the file "campus\etc\cwsi\portsData.xml" the links do not appear that means they are not discovered.
In Device Center, each switch is seeing the other switch as a neighbour.
Do someone has any idea on that issue ?
Thanks.

Hi,
I have the same problem.
I'm sorry but I'm not used to the TAC and I can't find where I can download the patch.
Can you tell me what is the procedure to get this patch ?
thank in advance
Nicolas

Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

We upgraded from BCM 2007 to BCM 2013. Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
Shows fields that don't exist etc.
The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
Please let me know what the support avenues are for this product.
Chris Smith

Hi,
This issue may be caused since the BCM was not installed properly.
Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
Then go to
http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Operations Manager 2012 R2 Management Pack importing issue

Hi
I seem to be having an issue importing certain management packs, when i do i get the below error:
Windows Server 2008 Operating System (Monitoring) could not be imported.
If any management packs in the Import list are dependent on this management pack, the installation of the dependent management packs will fail.
Verification failed with 2 errors:
Error 1:
Found error in 2|Microsoft.Windows.Server.2008.Monitoring|6.0.7296.0|Microsoft.Windows.Server.2008.Monitoring|| with message:
Could not load management pack [ID=Microsoft.Windows.Server.2008.Discovery, KeyToken=31bf3856ad364e35, Version=6.0.7296.0]. The management pack was not found in the store.
: An error occurred while loading management pack b4bda654-49bd-6e04-ca24-e152fc227001 from the database
Error 2:
Found error in 2|Microsoft.Windows.Server.2008.Monitoring|6.0.7296.0|Microsoft.Windows.Server.2008.Monitoring|| with message:
Could not load management pack [ID=Microsoft.Windows.Server.Library, KeyToken=31bf3856ad364e35, Version=6.0.7218.0]. The management pack was not found in the store.
: Version mismatch. The management pack ([Microsoft.Windows.Server.Library, 31bf3856ad364e35, 6.0.6957.0]) requested from the database was version 6.0.7218.0 but the actual version available is 6.0.6957.0.
Please can someone advise.
Regards
Adrian

Hi,
Solution: An exception is thrown while importing the Red Hat Linux Management Pack for Operations Manager 2007
http://blogs.technet.com/b/operationsmgr/archive/2010/12/15/solution-an-exception-is-thrown-while-importing-the-red-hat-linux-management-pack-for-operations-manager-2007.aspx
Based on this case, the issue might be resolved by re-importing the Microsoft.Windows.Server.Library Management Pack.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error showing while adding a management pack to 2007R2 authoring console

Hi Every one,
While trying to add an unsealed management pack to 2007 authoring console we are getting error
XSD Verification failed for management pack[line: 1, "color:#222222;font-family:arial,sans-serif;font-size:13px;line-height:normal;">
system.xml.schema.xmlschemavalidationException:The schemaversion atribute is not declared
any help will be thank full
Regards,
Nikhil

The Authoring Console has not been updated and does not understand the OpsMgr 2007R2 MP Schema version. It can still be used to produce MP that will work on OpsMgr 2007 R2, but you need to reference the old versions of the libraries.
You can check this link , it will help you in your issue
http://blogs.inframon.com/post/2012/06/12/Choosing-the-correct-Management-Pack-Solution-with-Visual-Studio-Authoring-Extensions.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Yoga 11s Windows 8 to Windows 8.1 Upgrade - Power Management Compatibility Issue

I recently upgraded to Windows 8.1 on my Yoga 8.1 device. I followed the application removal instructions before upgrading, then reinstalled the correct drivers for 8.1. Everything works well except for the fact that I get a Windows warning that there is a Power Management Compatibility Issue with the Lenovo ACPI-Compliant Virtual Power Controller. Any idea how to fix this? All hardware in the Device Manager are working properly.
Thanks in advance for your help. I have BIOS 7xxx.
Regards,
Nate
Solved!
Go to Solution.

I have this exact same issue, but with the 8.x BIOS.
My 11S also has issues going to sleep automatically when plugged in or on battery power, as well as staying asleep more than one second when on battery power, regardless of whether I initiate sleep manually via the menu or by closing the lid/pressing power button. I figured they could be related to this, but I'm pretty sure I had the same issues before the Windows 8.1 upgrade.

Apex and the Oracle Change Management Pack

Hi everyone
I'm looking for some feedback from anyone that has used the Oracle Change Management Pack (CMP) with an Apex development (or is it really only for Oracle Apps)?
Could the CMP be used against the APEX_04000 schema to sync a Dev environment with Test and Production? If so, this would nicely lead into an Agile approach to development, even perhaps Continuous Deployment :)
I'm concerned that I can't find anything on the web about Apex and the CMP, so I suspect it can't be done :(
Any comments gratefully recieved.
Shunt

You are going to have to provide a lot more information for anyone to help you from the basic ... like in what version ... to the specific ... what functionality do you want?
In general none of the "packs" run any code not in the database in the form of built-in packages. For example much of the functionality of OEM Grid is implenented in DBMS_ADVISOR, DBMS_MONITOR, DBMS_SERVER_ALERT, etc.
But without specific questions no specific answer is possible.
You can find demos of the above referenced packages here:
http://www.morganslibrary.org/library.html

Issue with custom management pack

i've created a form and class for the service request
i can open the form and it works as designed but when i click ok, i get this error.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.EnterpriseManagement.GenericForm.ContentPanel.VerifyRequiredValues(List`1& errorMessages)
at Microsoft.EnterpriseManagement.GenericForm.ContentPanel.OnPreviewSubmit(Object sender, PreviewFormCommandEventArgs e)
at Microsoft.EnterpriseManagement.GenericForm.FormChanger.OnPreviewSubmit(Object sender, PreviewFormCommandEventArgs e)
at Microsoft.EnterpriseManagement.UI.FormsInfra.PreviewFormCommandEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at Microsoft.EnterpriseManagement.UI.FormsInfra.FormView.RaiseFormEvent(RoutedEvent formEvent, RoutedEventArgs eventArgs)
at Microsoft.EnterpriseManagement.UI.FormsInfra.FormViewController.OnPreviewSubmit()
at Microsoft.EnterpriseManagement.UI.FormsInfra.FormViewController.ExecuteSubmitInternal(Boolean async)
at System.Windows.Input.CommandBinding.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
at System.Windows.Input.CommandManager.ExecuteCommandBinding(Object sender, ExecutedRoutedEventArgs e, CommandBinding commandBinding)
at System.Windows.Input.CommandManager.FindCommandBinding(CommandBindingCollection commandBindings, Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
at System.Windows.Input.CommandManager.FindCommandBinding(Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
at System.Windows.Input.CommandManager.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
at System.Windows.Input.RoutedCommand.ExecuteImpl(Object parameter, IInputElement target, Boolean userInitiated)
at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
at System.Windows.Controls.Button.OnClick()
at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(MSG& msg)
at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
at System.Windows.Window.ShowHelper(Object booleanBox)
at System.Windows.Window.Show()
at System.Windows.Window.ShowDialog()
at Microsoft.EnterpriseManagement.ConsoleFramework.WindowManager.GenericWpfWindowConstructor.BeginShow(ShowViewContext showViewContext, Object parent, Object view, AsyncCallback callback, Object state)
at Microsoft.EnterpriseManagement.ConsoleFramework.ViewConstructor.BeginShow(ShowViewContext showViewContext, AsyncCallback callback, Object state)
at Microsoft.EnterpriseManagement.ConsoleFramework.WindowManager.WpfWindowRecord.ShowWindow()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()

you know the more i look at this.
i think what happens is, i followed these instructions to the point of creating the runbooks
http://blogs.technet.com/b/antoni/archive/2014/04/09/system-center-2012-service-manager-and-orchestrator-integration-example-walkthrough-start-to-finish-new-hire-provisioning-service-request.aspx#pi47623=3
and i can't use the form because there's a few required fields on the general tab and those were written to do all the work with runbooks and request offerings, so those instructions were written with the idea of never even using the form inside of service
manager, so that's why it doesn't work in my case.
so i guess the options for this are.
1. remove the field requirements on the general tab
2. make the general tab and the other tabs work with this management pack/form.

High Watermark issue with monitoring Service Manager 2012 R2

Hi,
Our customer has a Service Manager / Operations Manager 2012 R2 environment where SCOM will regularly generate an alarm related to High Watermark monitoring on the Service Manager data warehouse - not every day though. The alarm looks like this:
Value of 3559 is not higher than 3559
This value hasn't changed for weeks.
Having done a lot of searching we have found nothing but reference to the same recurring flow of information where people keep mentioning different values but there is no conclusion of what this might be caused by and how to solve it. The solutions
have become outdated anyway. Here is one example:
http://social.technet.microsoft.com/forums/systemcenter/en-US/889af8f3-cdf8-4d88-ae99-5dbe18d529ef/service-manager-2012-data-warehouse-high-watermark-monitor
The Service Manager Database Account in SCOM is our service account that has sysadmin in SQL. Basically, with regards to the security configuration, our customer should be covered.
To my knowledge agent-based and agentless monitoring have both been supported since SCSM 2012 SP1. Also, we have the latest management pack for Service Manager monitoring in SCOM, at the moment this should be
7.5.3079.0.
As mentioned above the value has not been changing for quite some time and nor has it in the database.
My questions are the following:
- Is there anyone that has found a solution in the meantime, especially with regards to R2?
- What is the purpose of High Watermark monitoring for the data warehouse? Why does this need to be monitored?
- We would like to understand the nature of this value better. Should it be higher each day compared to the day before?
- Could it just be overriden in SCOM?
Many thanks in advance!

Rather unexpectedly, the SCOM alarm disappeared overnight and when checking the workflow in the incident that was generated from the alarm, the incident got a Resolved status right before midnight at 23:59:58. We have a ConfigMgr connector that is scheduled
to run at 23:00 which we had disabled a day ago to check something else. But I don't think it had anything to do with this. As the alarm has disappeared from the SCOM console, we have also checked the registry values. Now, instead of "3559 3559 3559"
it says "3559 3559 3585". We have had the 3559 value since 18th July, and out of a sudden something must have been triggered, causing the value to increase. What was triggered and how, no idea... Not sure either what it means that only one of the
Three numbers have been updated with a new value. When talking about the DW jobs, using the SMlets we can see every day that, MPSync, DWMaintenance and the ETL jobs are working well. What we have had though for a longer time is that the cube processing
tends to have issues once a week, where processing won't finish and the cubes get hanging in a running state. We can fix that manually every time and often we don't even have to touch DWMaintenance or the ETL jobs, we don't need to go beyond manually
working with the cube processing jobs themselves. So it might not have an impact on the ETL jobs themselves. Occasionally we do find ourselves in a situation where we we need to play around in the SQL database and manually set the required value (can't
recall if it's 3, 6 or 7) cause we get an error in the DWMaintenance batch, but even though that's an occasional issue it's not constant and also something we can solve, and furthermore it's another known issue outside of the high watermark issue. So
we are a bit uncertain but can at least see that something works sometimes that sometimes increases the high watermark value :). In our case.

JEE WebSphere Management Pack: Issue with 8.5.5 Discovery

Similar Messages

Maybe you are looking for