Jelly Bean Update for Razr Maxx Hd

I just got a razr maxx hd yesterday and am trying to perform the Jelly Bean update. It does not show up in my downloader, but I keep getting a notification saying "Download suspended, will resume shortly." and it shows 0% progress. When I try to restart the download, it notifies me that it is already downloading and that I will be notified when it is finished but it has been over 12 hours since I originally began the update. Is there a way to fix this?

General OTA release should have started already. Manual upgrade option should also be available sometime this week. I prefer manual upgrades to OTA's as the install is invariably more stable and functional. Downside is that they wipe your phone clean, but this assures that app dependencies install "where they are supposed to go" so that apps function as intended. OTA's have to "work around" installed stuff, and this often causes inconsistent "glitchy" behavior from individual to individual. Some OTA installs work perfect, others have issues which may or may not reproduce from phone to phone.

Similar Messages

  • Jelly Bean update for Xperia go in Middle East

    Hello,
    im not sure if Jelly Bean update for Xperia go in Middle East is available.
    cause im trying to update my phone from ICS to JB using [PC Companion and sony update service] an message appear says that [you already have the latest update].
    can anyone confirm that jeally bean not available in Middle East ?

    here is an alternative if you MUST have the update right now
    http://talk.sonymobile.com/thread/41609
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Possible update solution for some Jelly Bean issues on Razr Maxx

    I bought a Razr Maxx used two weeks ago and wanted to a post a possible solution to the broken Jelly Bean update. My Razr Maxx (practically new) was slow, lagged, and gave me about 10 hours of battery life. Also, my Wi-Fi was horrible just 10 feet from the wireless router and it ran hot.
    Before I chucked it for a used S3 I decided to do what others had done. Keep in mind, the phone had been previously factory reset after the JB update had been OTA'ed to the unit a few months ago. It was put in a drawer as the person bought a new phone.
    So to be clear: It had gone through a factory reset but without clearing internal memory and had serious issues. I had cleared the Dalvik cache but it didn't help. Here's what fixed my phone:
    I did a battery recalibration. This can be done by running the phone down to zero. Shutting it off and charging it overnight. This may have to be performed twice.
    Backed up my files, removed the mSD card and from the OS, erased the internal storage. I also went into the Settings / Privacy and set Automatic Restore to off.
    I cleared the Dalvik Cache again.
    http://www.droidforums.net/forum/droid-razr-maxx/232462-how-wipe-cache-without-doing-factory-reset.html
    I  booted into safe mode.
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50079
    From the OS within safe mode, I performed a factory reset and had it clear the internal storage again.
    Started the setup process.
    Cleared Dalvik Cache again.
    The result is a smooth "buttery" feel (well, as smooth as this platform can offer) no massive lagging like before where the phone would just lock up for five seconds, no over heating, WiFi is seemingly normal and battery life is Maxx instead of Min. To give you an idea, the phone had been on light use and on for maybe 13 on battery when I did the reset. I did the hard reset from a 65% battery and reinstalled all the apps over WiFi and reconfigured. At 2:30 a.m. it was at 1 percent so I set the screen to 100% brightness and played a video until it died about 3 a.m. Basically the screen was on and the phone being used from around 9 p.m. until 3 a.m. after coming off the charger at 8 a.m. the previous morning.
    Will this work for you? I don't know but I know the Jelly Bean in place upgrade on this phone is pretty flaky from the complaints.
    If your phone has been turned into a pile of junk by the update, you have nothing left to lose unless you're just using it as a bargaining chit to get a new phone from VZW.
    Good luck to anyone who tries it.
    If you are trying to diagnose battery issues, I recommend GSAM.

    >> Duplicate post removed for cross-posting violations per the Verizon Wireless Terms of Service
         See After latest system update, text messages don't always "send." for original message <<
    Message was edited by: Verizon Moderator

  • Jelly Bean Update for Thrive

    Has there been any official comment or timeframe from Toshiba about updating Thrive to Jelly Bean 4.2? With the specs on the Thrive, it should support Jelly Bean.
    Thanks,
    Darrin

    indest, I should probably provide some clarification here.
    I actually work for Online Support Engineering. I don't have much will over product (including software) decisions. With the forum, my role is point people to solutions, provide help when I can, and to report trends and issues found from the forum. While I might not always have a solution, I do report what I see, which includes sometimes pushing for fixes for certain issues.
    - Peter

  • Jelly Bean update for Excite 10 SE now available

    We are pleased to announce a software update for your Excite™ 10SE tablet. This release will provide performance enhancements to your device. Toshiba encourages you download and install this update. Release 4.1.1.000121110.01 will improve the Auto Brightness feature in conjunction with Auto Rotation.
    You can update your system software by any of the following methods:
    Tap on the update message sent by the Toshiba Service Station application to your device, or:
    From the Home screen, tap on the “Apps” icon in the upper right corner.   Locate the “Service Station” icon and application.  Tap “Check for Updates” and follow the steps. 
    Release 4.1.1.000121110.01 (Jelly Bean) Highlights:
    Improved smooth scroll function and screen brightness.
    Added USB HID (KB and Mouse) support.
    Fixed Touch screen, TOSHIBA Media Player, and Google Play Books issues.
    Added support for several Game controllers.
    Enjoy, and thanks for the early installation reports!

    This community caters products sold in the U.S. and Canada. It is recommended for you to contact Sony India here for best assistance.
    If my post answers your question, please click on "Accept as Solution,"
    this will help other Users in finding their answers easily while navigating through the Sony Community website.

  • Everyone seems to be talking about the Jelly Bean update, however when I check for an update, it says my phone is up to date.  Why is this?

    It seems like every other RAZR Maxx has an update but mine.  What the heck? lol

    Same with mine - got in May. Says it is Factory Certified - factory tested 
    but never used. Claimed not a full charge yet it was 95% charged...what can
    you  do - other models were lesser in quality and features..interesting
    that you had  option to take update - I did not. My email accounts were not
    receiving. Didn't  try nav doc...Hope this one will be better.
    Linda
    <Full name removed for privacy per the ToS.>
    In a message dated 1/3/2013 8:35:25 P.M. Eastern Standard Time, 
    [email protected] writes:
    (http://community.verizonwireless.com/)   
    (http://www.verizonwireless.com/b2c/index.html)     (http://www.verizonwireless.com/b2c/explore)   
    (http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewSho
    pIndex)    (https://wbillpay.verizonwireless.com/vzw/nos/topline.jsp)   
    (http://support.verizonwireless.com/clc/)     
    Re:  Everyone seems to be talking about the Jelly Bean update, however 
    when I check for an update, it says my phone is up to date. Why is  this?
    created by Denvertoad
    (https://community.verizonwireless.com/people/Denvertoad)   in DROID RAZR MAXX - View  the full discussion
    (https://community.verizonwireless.com/message/922462#922462)
    Message was edited by: Verizon Moderator

  • Jelly Bean update woes?

    I've updated my Razr Maxx to Jelly bean through the About Phone > System Updates option.  It's been a few days now for all the apps and syncing to have settled down, but I'm still seeing the battery getting chewed through now and it's looking like Android OS is using up close to 60% of the battery (averaging about 58%).
    I've also seen that with the update certain apps (bloatware) has been removed.  However, I still seem to have a few apps, like MotoACTV & Verizon Videos, present that should have been removed with the update.
    I was going to wipe the cache in Recovery Mode before doing a Factory Reset, but holding down the Volume +/- rocker and the power button just boots my phone up normally.  Recovery Mode hasn't been removed in Jelly Bean has it?  I wouldn't think so.
    UPDATE:  I did get the boot menu to pop up but when selecting Recovery it only showed me the little Android with an "!" in a triangle over his open chest case... and then it opened right back up as it would normally boot.
    Anyone have any similar issues with the update?  Any fixes if so?

    Oh, you guys are lucky. Had to get them to send me a replacement Razr as mine wouldn't boot after the update. Rep was friendly and apparently handled 20+ calls on the failed update that DAY. Those techs that post the beta updates to the production server should be fired. You need to freaking test your stupid OS updates before you push them. I understand the stockholders are looking for profit but if people are leaving because you keep breaking their stuff then when the company goes under you're the only one to blame. Also since receiving my new phone it's being a pain to set up. Have to do half of it on my account online from my computer as it won't take inputs from my phone.

  • Why won't my home wifi work after jelly bean update?

    My phone updated to jelly bean on tuesday morning, and i noticed i cannot connect to my home wifi.  It will connect at school or work however.  I have tried turning off and on my phone and my router.  I know its not my connection because my other devices all connect to it.  When i go to the wifi on my phone, it detects my home wifi with a full signal, but when i put the password in to connect, it says the signal is poor and it just repeatedly tries to connect.  Is there any way that i can get my wifi to work again?  If i have to and if there is a way i will uninstall jelly bean if thats the only way to get it to work again.

    Here is my current situation with a brand new Razr HD:
    -Linksys WRT54GL with updated firmware
    -New Razr HD purchased 5 days ago
    -System Version: 9.16.6.X926
    -Android Version 4.1.2
    -Build Number 9.8.1Q-62_VQW_MR-2
    My Mom got the same phone at the same time and has dropped calls, poor wifi signal and range, etc.
    I have fully set up my phone with apps and all settings perfect, cleared the system cache, one factory reset and input all app usernames and passwords again, etc.
    My phone is perfect, except for not connecting to wifi in a room downstairs from the router where all other devices, a Nook, 10-year old DELL laptop, and Droid Incredible get 4 full bars of wifi strength. This Razr does not connect at all and rarely if it does when I leave the door open gets one bar of strength and is useless.
    I love the phone so much I am reluctant to swap it out and lose all my app settings and customization. I read that it isn't mattering if you swap it out, still the same problem. But it's bothering me and I want it right so I went to the Verizon store today to test it and swap it out for a new different one. They don't perform tests and didn't know what I was talking about. Very abrasive staff and manager tried to research the issue for a half an hour, then said they had a call in to Motorola. If I wanted to swap it out I could but that would be my one swap and that's it.
    I have actually spent so much time and effort on this I wanted to get a MAXX HD for my wasted time and frustration. That is simply out of the question. I stood there with my phone connected to the Verizon wifi network in the store with one bar of wifi strength, while the display connected to the same network showed a full network signal all bars.
    They were so abrasive, demanding that it doesn't matter how many wifi bars you get it will still connect to the Internet. I said no that's not true this device will not connect in my bedroom while all other old devices get full wifi strength. They didn't care.
    They were so reluctant in the matter that I decided to walk out and watch for an update to Jelly Bean to solve the issue. People are taking their phones back and it doesn't fix this. It seems to be strictly a Jelly Bean update fix.
    I will watch my phone, only use wifi in large areas that usually work fine, etc. My question is: When will there be a Jelly Bean update pushed out to Razr HD owners on Jelly Bean so they will have comparable wifi and signal strength to every other wifi enabled device that exists?
    Thanks
    PS. I have tried every single router and phone setting mentioned on any forum. Same thing. This requires a 2nd update.

  • Jelly Bean Update Fails

    I've tried 8 times now to update my Razr Maxx with the new Jelly Bean update. It downloads fine, but fails during install. Any advice is appriciated.

    jimfitzgerald wrote:
    If you haven't already, do a factory reset then the update.
      Just remember that if you do a factory reset, you will be resetting your phone back to the point it would be new to you. You will have to link it to your google account again, sync everything, add all the apps back, setup email, etc.
      Please make sure this is the last resort to try. Have you tried just restarting your phone? How much storage is available on the internal store area? Is your charge on the phone sufficient (Plugged in?)

  • Jelly Bean update completely killed true hands free voice dialing.

    Regardless of the fact that S-Voice (as well as Google Voice dialing/search) is unable to recognize most of my contacts, it's also a fact that by definition, it cannot work as a true hands free voice dialer, which is defined as the ability to make a call without touching (or even seeing) the phone AT ALL.  This is due to the simple fact that neither S-Voice nor Google Voice dial/search allows you to say "yes" or "no" to a phone number confirmation prompt.  In other words, you need to see the screen at some point in order select the correct number to dial.  Prior to the Jelly Bean update, this issue was relatively easily solved by using a third party app -- I preferred an app called "Cyberon Voice Commander" -- to take over the voice dialing duties.  The first time you hit the Bluetooth button after installing the app, you could select the default program to respond to the BT button.  I simply selected the Cyberon Voice Commander app, and everything worked from this point forward -- I could dial a number without ever taking the phone out of it's case.
    With the Jelly Bean update, however, this is suddenly no longer possible because S-Voice completely takes over the Bluetooth button, and does not allow another app to take over as the default.  The "launch by default" section for S-Voice in the application manager is now greyed out, and says "no defaults set" for S-Voice even though S-Voice is set as the default program to launch when pressing the BT button.  The only "potential" solution is to completey "disable" S-Voice via the application manager, which does allow you to select Cyberon Voice Commander as the default BT button press app, but there are two problems with this.  First, the default resets when turning the phone on even though you select "always" for the CVC app.  This means that you have to re-select the third party app as the default BT button app EVERY time the phone is turned off.  Second, disabling S-Voice is not a solution because I still would like to use it for things OTHER than voice dialing.  Disabling it completely removes it from the menu, making it unusable even for things that it is better at.
    I cannot believe how hard S-Voice is being shoved down our throats.  Why would they make it mandatory?  The whole point of Android is that it's supposed to be "open" and allow users to individually decide on their own way of doing things -- i.e. to offer multiple approaches that suit your preferences rather than adopting a narrow minded "we decide what's best" attitude.  This is the whole reason that I moved away from Apple.  This S-Voice situation, however, is just ridiculous.  It's fine to push it as an "option," but please keep it OPTIONAL -- particularly given that it literally CAN'T do what other apps do (i.e. true hands free dialing.)
    Larry

    A few things you can try ... turn off the phone, remove the SIM card, wait a few minutes, then reinsert the SIM card and re-boot the phone.  Maybe a fresh connection to the network will improve the signal/call quality.
    Do a system cache clear; it won't delete your data:
    Power down phone
    Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
    Use volume down to navigate to 'Recovery', use volume up to select
    You should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously to go into system recovery
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select
    If all else fails, back everything up, remove the SD card to be on the safe side, and factory reset the phone.  No, it's not a preferred option, but sometimes that is what it takes to 'clear out the cobwebs' after an operating system update.

  • Jelly Bean Update Problems on Xperia S Tablet

    I think we need a new topic for Jelly Bean update problems and fixes.
    Solved!
    Go to Solution.

    small fonts and icons blurry pixelated in notification or google agenda widget
    browser crashes a lot.
    Missing jelly bean home launcher
    Wifi disconnecting for no reason.
    Animations aren't smooth tough tablet is more responsive then android 4.0.3 release6b

  • Xperia J- Problem in touch after Jelly Bean Update

    Hello Friends,
    I am facing a serious problem in Xperia J after the Jelly Bean Update.
    1) The touch functionality is not working, ie, I am not able to tap the icons to open an app
    2) The back/ home button does not respond to touch
    The next point is very interesting:
    3) The touch automatically happens, ie, when  I just unlock the screen by sliding the unlock button, then automatically the apps get selected, closes by itself, ofens the inner pages which I cant even control.
    Please help by atleast advising me on how to down grade the softwareback  to ICS.
    Thanks in advance,
    ~Viswanath

    It would be worthwhile running a repair:
    To repair the phone software
    1.     Install PC Companion on a Windows PC from Support
    2.     Turn on the phone, and connect it to the PC using a USB cable.
    3.     In PC Companion, under Support Zone and click Start.
    4.     Under Phone Software Update, click Start.
    5.     Click repair phone.
    6.     Follow the on-screen instructions. 
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Downloading phone book problem after "Jelly Bean" update

    I own a 2011 Mitsubishi Outlander GT with Bluetooth (labeled as Link System) and a Motorola Droid RAZR. The vehicle has always recognized the phone as paired. Prior to "Jelly Bean", I had no problems downloading the entire phone book to the Bluetooth device in the vehicle. However, I had noticed on a recent trip that several new contacts were not recognized by the Link system. I realized that I needed to update the phonebook. I first deleted the old phone book from the vehicle, but I was then unable to download the new phone book to the vehicle. I tried several times but with no success. An additional Bluetooth symbol would appear to the left at the top of the phone display with the message "PBap connection request". The message would disappear after a second. But several seconds later, the upper left-hand Bluetooth symbol would also disappear, and the vehicle Bluetooth device would then inform me that the phone book download had failed. I contacted Verizon tech support last week, and the rep and I concluded that the Jelly Bean update was the problem, but she was unable to fix it. I also noticed elsewhere on the Verizon web site that several other people with different vehicles were also unable to download the phonebook from their Android phone to their vehicle's Bluetooth device.
    I then realized that perhaps the Jelly Bean update had changed only how the Bluetooth on the phone interacted with the Bluetooth/Link system on the vehicle. I concluded that I needed to delete not just the old phone book from the vehicle's Bluetooth device, but also the pairing/recognition of the phone itself from the vehicle's Bluetooth device. I then reinstalled pairing/recognition of the Droid RAZR on the vehicle's Bluetooth device, and successfully downloaded the phone book from the RAZR to the Bluetooth device on the vehicle. This action should fix the problem on other vehicles as well.

        Jandariea, I understand how frustrating this could be. You would think a software update would be fully baked and basic functions like Wifi would work. However, this is not the case with all Jelly Bean software updates. You sound more like the exception then the rule! Have you tried to disable/enable airplane mode? Does this issue only happen with your home wifi, or can you connect to a public Wifi (i.e. library or Starbucks)? Have you tried to do a master reset on the phone http://bit.ly/T1Ib1B ?^SP

  • Terrible reception after Jelly Bean update

    The morning after upgrading to Jelly Bean my phone suddenly began having terrible reception issues.  At home I normally get about 2-3 bars but I have never had any issues getting calls out or in or texting... Now I get one bar and absolutely cannot call out or text out AT ALL...  I can receive texts, but I get no calls.  Sometimes it will say that I have no service, even when I have one or two bars...
    Even when I drive closer to town I can't call out until I get 4 or 5 bars...  even then reception is poor and calls are dropped for no reason.  Literally this phone has gone from working beautifully to being absolutely worthless as a phone.  Wireless still works fine at home and I still get 3G/4G service...  It also always says I'm Roaming at home or if I have less than 3 bars...
    I have tried *228 and even reset the phone to factory defaults with a full wipe.  No beuno...  Obviously I've tried numerous reboots as well...
    I'm not sure if the Jelly Bean update is a coincedence, but something is definitely up with my phone...
    Suggestions?

        Javaslinger, I'm sad to see that you've developed signal issues on your phone after the software update. Updates should bring enhancements and fix bugs, not cause issues. It looks like you've done quite a bit of troubleshooting already. If you have a battery saver, please uninstall as these can turn off data to save battery, causing signal issues.
    If still having issues, we'll need to submit more info to our product team.
    1) Provide network type and network strength details observed on phone, Menu>Setting>About Phone> Phone status> network type and network strength parameters.
    2) What type of network service issues are observed on device? Like call drop, browsing failures, SMS etc..
    3) Do you see any flickering in "network type" icon at the time of issue happened.
    4) Is the issue random / always ?
    5) Is the issue limited to a location/region or does he have problem everywhere you visit?
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • The only way to fix Xperia P problems after the jelly bean update!

    After the jelly bean update my Xperia got slow, I could not answer phone calls, the call log took so much time to appear , I have tried uninstalling external softwares , reseting the phone , nothing worked. Finally I have downgraded the phone follwing the guidelines provided in this link - http://talk.sonymobile.com/t5/Android-development/GUIDE-How-to-Install-Jelly-Bean-ICS-Ice-Cream-Sand...
    Now my phone is fast , gallery is working fine , I can receive phone calls , no useless chrome by default , the google search widget works fast , the overall performance is much better. So I would recommend people to downgrade their Xperia p to ice cream sandwich and stick with it. OLD is GOLD! 

    What is your build version now after downgrading to ICS? I could not download 6.1.1.B.1.54 from the list which was best to me.. Please let me know quickly, I'm having the same **bleep** problem in JB.

Maybe you are looking for

  • Open report in pdf format without opening in browser.

    Hi, Any body know show can save my report in pdf formate in a specific folder without opening in browser. I am using 9.0.4 developer suit. Regards

  • How to display the content of a file in the portal?

    Hey guys, could anyone help? I just created a page which includes two iView, one is KM Navigation iView to display a certain repository, while the other is for displaying the content of a certain file I click in the navigation iView. And now the prob

  • Problem installing Flash

    I am having three problems with Adobe Flash and would like some assistance in resolving them. 1)  Problem number ONE:  Several months ago installing an antivirus program broke my Internet Explorer.  All attempts to fix or upgrade IE have failed.  Not

  • Not found in system

    hi there ive tried to download the HP recovery manager but is saying the softpaq will not be installed because HP Recovery Manager cant be found in my system? what to do now? lisa x This question was solved. View Solution.

  • Tiny iWeb slideshow in iWeb 08

    Hello, I just upgraded to iWeb 08 and realized that the former slideshow function on photo pages (black background with reflection) now shows very small versions of my photos, more like thumbnails than the actual photos, and in any case much smaller