Jellybean update Not found yet (Xperia P)

Im using Xperia P. Still I didnt get Jellybean update from. I searched several times from software center.
When is the officially release date?

you have to wait for the update to be approved and released in your country, if your phone is or was locked to a carrier you have to wait for them to release it, not Sony.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • IPod driver update not found

    Hi,
    I got a brand new Nano for Christmas and cannot get it connected to iTunes. I have tried the 5 R's, read through a number of forum messages but have not found anything that works yet. The iPod is recognized when hooked up to a newer laptop, but on my computer it doesn't show up in iTunes or Windows Explorer. I've got the latest version of iTunes installed.
    I've tried all 4 USB ports on the back of my computer. The Device Manager says that I have a Standard Enhanced PCI to USB Host Controller which I understand means that I have USB 2.0 ports. There is an entry for iPod under Other Devices that has a yellow question mark on it. When I look at the properties it says:
    This device is not configured correctly. (Code 1)
    To reinstall the drivers for this device, click Reinstall Driver.
    When I try to reinstall it does not find any drivers automatically and does not find anything in C:\windows\inf. There is an entry for Apple iPod USB driver under Universal Serial Bus controllers and the properties say that it is working correctly. However, when I choose the troubleshooter, it says "This application has failed to start because bnts.dll was not found. Re-installing the application may fix this problem."
    The iPod itself says "Connected Eject before disconnecting" when hooked up to the USB port.
    Any help would be greatly appreciated!
    - Laurie

    hmmmm. okay, i think your idea about the PC not recognising what kind of ipod it is might be on the money. that can sometimes hit people if the connection to the ipod is flaky to precisely the right/wrong degree (enough to see an ipod, but not enough to recognise it correctly).
    so perhaps let's keep working on the poor connection possibilities. trying a different cable was a good idea. also check to see if you can get better recognition on a USB port at the back of the PC rather than the front, or if you unplug other high-power USB 2.0 peripherals.
    if you have access to another PC with iTunes 7.0.2.16 installed, try seeing if you can get better recognition for the restore on that.

  • Link to desktop software and update not found

    I have been trying to update mt curve 8300 and when I try and download the file I get a file not found.  I have ATT.  Someone please help.

    1. Desktop Manager 4.6.0 B16 Multilanguage - With Media Manager... Download Software, save to desktop. install to PC.
    2. BlackBerry Handheld Software v4.5.0.152 (Multilanguage) for 8300 smartphone...  Download Software, save to desktop. install to PC(Desktop Manager must be closed.
    3. Open Desktop Manager, plug in device, select UPDATE.   

  • Adobe Flash update "Not Found" ?? since my update to Froyo

    After the system update to Android 2.2, appbrain keeps telling me that Adobe Flash is ready for update, but when I try to install it says "Not Found".  What is messed up?  Other than needing a new Swype beta, this is the only 'whoops' I have experienced.  I like being able to turn phone either way and have the browser recognise it. 

    @GL17oxford... Flash 10.1 comes pre-installed with 2.2 upgrade. However, you are correct that there is an Flash Player 10.1 update on the market which for some reason does not show up on the DROID Incredible immediately after the upgrade. The update on the market is a fix release which solves some issues with performance and will show up in the market eventually. It did for me a few days ago. Just keep going back to Android Market and search for "Flash Player 10.1". And beware that you only install the one that is published by Adobe Systems. Another way to search would be : pub:"Adobe Systems". Hope this helps...Cheers!

  • HT1567 System says DISC RECORDING NOT FOUND - yet Ive downloaded it again.

    System says DISC RECORDING NOT FOUND when burning to disc

    System says DISC RECORDING NOT FOUND when burning to disc

  • Software update problem : updates not found on 8088

    Hello,
    I recently found that when I performed an update on my clients they always reported Up to date. I then made them point to Apple's software update and they found that Itunes and a performance update was necessary.
    So I tried to find what was wrong. My server seems to have downloaded all the latest updates (including ITunes and the performance update).
    I disabled SoftwareUpdate and reenabled it.
    Now my clients can't even connect to my Software Update server : the bar stays fix for a really long time.
    When I look at the logs from my server : I see that a few products can't be downloaded :
    Product 061-7024 will not be available for installation.
    Unable to download or create .smd file for product
    But maybe the main problem is that when I try to contact http://myserver:8088/
    I dont see anything and when I try http://myserver:8088/index.sucatalog it begins to open the file but displays only the file's beginning. It keeps downloading the rest of the file really slowly (I think that's what makes the bar stays fix when I try to update).
    Any clue ?
    p.a

    Hello again,
    After a few more tests, I noted this.
    Before restarting Software update, new updates weren't visible to clients.
    After restarting Software update : Clients unable to connect to Software Update Server : bar stays fix for a very long time. In fact it appears to be a really slow connection to the server. After a few minutes the available updates appear (ITunes and Performance update). If I click to install them. Downloading begins but it's very slow 1k/s approximately.
    I tried to untick Bandwidth limitation that was set to 1Mo/s. And after restarting Software Update, surprise : my clients can connect to SUS, see the new updates and download them at LAN speed.
    Why did it work before ?
    I tried to reset Bandwidth limitation to 1024k/s to see if it makes any difference. Yes when it's set, SUS doesn't work.
    So really painful to work with this, almost no options to fine tune the update server and it's better to let all to defaults to avoid problems it seems.
    p.a

  • Time machine - backup not found yet visible

    Hello,
    I am having trouble setting up Time Machine on a new Macbook Air running OSX Yosemite 10.10. 
    I have an external hard drive connected to a first generation Airport Extreme, and it is running fine and backing up on my other computer, a MacBook Pro which is running OS X version 10.7.5 and AirPort Utility 6.3.1.
    Yet when I purchased the new Macbook Air (listed above), which is using Airport Utility 6.3.4, upon opening Time Machine, it is not able to see my backup disk.  It just keeps saying "Set up an AirPort Time Capsule that is not listed here."  When I click "Setup" it brings me to the AirPort Utility, and I can see my AirPort Extreme, and further, when I click on my AirPort Extreme and "Edit" I am able to see my backup drive under the "Disks" header.  There is plenty of space as well. 
    Any reason why Time Machine is not able to see my backup disk, despite being able to see it in AirPort Utility?  I As I said, it is working fine on the MacBook Pro.
    Many thanks in advance for any suggestions.

    Apple never officially supported Time Machine backups to a drive connected to the USB port of the AirPort Extreme, Generations 1 through 5.
    Some users were able to make this work, and some were not up using operating systems up through Mountain Lion (10.8.x).
    Apple pretty much shut off the capability to even try this when Mavericks (10.9.x) was introduced, and this continues through Yosemite (10.10.x).

  • V40.0.003 (I Think) Update not found (NOKIA 5230)

    On my nokia 5230 i cannnot find the new update V40.0.003. So i can use the nokia IM. and the better web browser.
    please help
    the version is on v20.0.005

    Reasons why a phone cannot update:
    1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
    2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
    3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Photoshop CS5 12.01 updater - Not Found!

    Hi People,
    This might seem really barmy! But I am trying to download the first Adobe update (12.01) for Photoshop CS5 Extended for Mac. only to find, sorry, can't find the download anywhere here on Adobe's site.
    Can anyone help? I have looked in the downloads section, and it tells you what the fixes are, but the link leads nowhere!
    Thanks
    Simon

    So are you saying I can update from version 12.0 to 12.04 in one step? I thought you had to update in increments, 12.01 > 12.02 > 12.03 > 12.04.
    I did try to use the 12.04 updater to update my 12.0 but it failed, not giving any other reason other than "Installation Failed".
    Any ideas?
    Thanks again
    Simon

  • Nokia 5800xm firmware update not found!

    hello0!
    Nokia has released many firmware updates since they had released nokia 5800xm.But still i am stucked with firmware v21.0.025.I cant find any updates via OTA.
    I want to know whether my phone's product code is something that is preventing my phone from recieving updates.
    My phones product code is 0588668

    hi mate,
    if you are checking then you may very well have a branded handset, in which case you will need to contact your network carrier and ask if they ever planned on releasing the firmware updates for your device.
    in the case they do not, then you can ask them for written permission to remove the branded firmware, and then take your phone to your nearest Nokia Care who will be able to install the generic, unbranded v60 firmware onto your device: http://nokia.com/support

  • E75 Firmware update not found

    My E75 is currently installed with the 100.48.78 version.
    When I check this site using my productcode it now says that the 110.xxxxx is available.
    However, when using the phone the SW-"search" (my phone is in danish and I don't know the english word for the application) teels there's an update available. BUT if I go to the devicemanagement to try and do an update it teels me after connecting to Nokia that there are no available updates ?!?!?!?!?!?!?
    My product code is 0582105 if that helps
    I hope that someone can help me.
    Best regards, Peter

     Hi All,
    I'm hoping i may be able to help some of you.
    I've been trying to fix this problem on my Directors phones for sometime now. They had the problem where by they would try to forward or reply to an email, it would say 'queued for sending' in the outbox then it would never send! I went through the process of trying to get a software upgrade through the PC suite and FOTA but with no avail, there is no software update for these UK phones (even if Nokia tell you, which is what they told me)
    In the end i managed to fix this by getting the original configurations setting sent to the phone. This is basically when you get a new phone your service provider will send you congfiguration setting to save onto your phone so things such as WAP, emails, MMS work properly. Got them sent, saved them, phone works perfect.
    02 for example, send the word ACTIVE to 2020 and you'll recieve the settings!
    Hope this helps at least someone!

  • Please help with this error. file not found yet it is in path. thanks

    when attempting to launch app, the following error is recieved:
    <Sep 30, 2004 1:30:47 PM EDT> <Error> <NodeManager> <Node manager could not find the required library, libNodeManager.so, in path - /usr/j2se/jre/lib/i386/client:/usr/j2se/jre/lib/i386:/usr/j2se/jre/../lib/i386:/export/home/bea/weblogic81/server/lib/solaris:/export/home/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib>
    i have copied the noted file, libNodeManager.so to every directory in the path, set permissions to rwxrwxrwx checked case and spelling.
    what am i missing?
    thanks in advance

    Try runnning ldd -v <program>
    This will list all the libraries that you will need to have in your library path, I am not a programmer, I am assuming that libNodeManager.so might be calling another library(ies) which you cannot find.
    I hope this helps.
    Regards,
    -Chris

  • Update not Found

    iTunes can't find the 2.2 software update for my iPhone. I click Check for Update, and it says "This version of the iPhone software (2.1) is the current version." Any help?

    I'm getting the same issue. Have upgraded from iTunes 8.0 to 8.0.1 to 8.0.2. Same "2.1 is the current version" message.
    Any ideas, short of doing a Restore?

  • 10.4.9 Update, not safe yet?

    Hi,
    I'm using my PowerPC Xserve as mail server, so after having read some of the threads here: Is it safe to install the update or should I wait for another patch to come out??
    I don't want to disable my mail server by applying the update ...
    Thanks,
    Jerome

    im running 10.4.8 on my servers
    thinking about the 10.4.9 update but i have made a few bit of modification to the mail configurations specifically postfix. am i right in thinking that the update will over write my postfix config file?
    i looked at the update kbase here http://docs.info.apple.com/article.html?artnum=304789
    and it doesnt look like its really got much in it that would be better than the 10.4.8, so i think ill stick with if it aint broke dont fix it unless anyone has some good points to make about it?
    Cheers,

  • I have followed the steps for running exe on target machine but camera streaming did not found yet.

    Install the following run-time engines:
    LabVIEW Run-time Engine (same version that was used to develop the VI)
    Vision Run-time Engine (same version that was used to develop the VI)
    A single-seat Vision Deployment License is required for each target machine on which you install the Vision Run-time Engine. See Related Links for more details.
    Copy the following DLLs from your development machine's System Directory, typically C:\Windows\system32, to your target machine's System Directory.
    ImaqDirectShowDll.dll
    ImaqDirectShowExport.dll
    Register ImaqDirectShowExport.dll by selecting the Windows Start Menu and selecting Run.
    Type in regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll and click OK to register the DLL.
    If you are on a different OS or if the system directory is different and you want to copy the file path instead of typing the whole path, you can drag the file to the command line in the Run prompt, highlight the path, right-click and select Copy.
    Paste in the command prompt window by right-clicking and selecting Paste.
    The ImaqDirectShowDll does not have to be registered.
    I have followed all above steps ,
    Can any one help me for solution ?

    My guess is that the driver is missing at the target system.
    You can add the driver (part of Vision Acquisition Software) you need (IMAQ, IMAQdx, ..) under the Additional Installers Section of your Build Specification and you will also need a runtime license.
    Christian

Maybe you are looking for