Jerky playback in elements organizer

Hoping some one can help out here.  I've downloaded the trial version of Premiere elements to edit videos captured with a Kodak playsport.  When I view the captured video in the organizer, it a very jerky playback.  When I play back using Windows media player or quicktime, it's nice and smooth.
I've tried capturing the MOV files in 720p and 720p (60fps) and have the same issue. 
Anyone have any suggestions?

Jerky playback in PE is almost always because you have not rendered the area where the jerk is. - or else you dont have a fast enough computer or enough RAM or have everything on one computer hard disk.
If you have a horizontal red line above any of your video in the time ine it means you dont have it rendered. It is caused every time you insert a transition or effect or if your original meaterial doesnt match the original project settings when you imported the video.
You dont have to render the whole project if there are only parts with a red line - just adjust the work space pointers to cover the red line and render that.
There are numerous posts in this forum about it and the way to cure it

Similar Messages

  • Photoshop Elements Organizer 11 crashes due to deadlock in the thread wait chain when creating thumbnails for *.mts (AVCHD) files

    Hi,
    the Elements Organizer 11 creates a deadlock in the wait chain when generating thumbnails for more than a handful of MTS (AVCHD) files.
    After importing AVCHD files from my Canon video camera, the organizer using default settings always crashes. I was able to narrow down the problem to be caused by thumbnail generating.
    After deactivating the automatic generation of thumbnails, the organizer does not crash any more upon launching .
    Of course, working without thumbnails is not very practical. The next resort is manual trigger of thumbnail generation by selecting "update thumbnail".
    If I manually trigger updating of thumbnails for files one by one, then it works for quite many files before crashing again.
    Selecting thumbnail update for multiple files at once has a much higher likelihood to crash.
    This does not seem to be related to particular file contents: a file that leads to crashing once may be flawlessly get a thumbnail created at the next attempt.
    The Windows event report looks as follows (German language Windows):
    Name der fehlerhaften Anwendung: PhotoshopElementsOrganizer.exe, Version: 11.0.0.0, Zeitstempel: 0x505e9f67
    Name des fehlerhaften Moduls: msvcrt.dll, Version: 7.0.9600.16384, Zeitstempel: 0x52158ff5
    Ausnahmecode: 0xc0000005
    Fehleroffset: 0x00009919
    ID des fehlerhaften Prozesses: 0x13c8
    Startzeit der fehlerhaften Anwendung: 0x01cfb676145d0c54
    Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\msvcrt.dll
    Berichtskennung: b8817e29-2269-11e4-bf2d-10bf487f7b28
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Occasionally, a different module is listed as erroneous instead of msvcrt.dll.
    My questions:
    - has anyone experienced the same problem?
    - is this a known issue with Organizer 11?
    - is the issue solved with Organizer 12?
    I have Premiere Elements 11, Photoshop Elements 11 installed and not experienced any other issues with these applications.
    Playback of said AVCHD (*.mts) files works flawlessly, i.e. I do not have any codec or performance issue on my PC.
    Deactivation of anti-virus software has no significant effect. I have excluded video directories from scanning anyways.
    Have deactivated face recognition, visual search and smart tagging in the organizer.
    Have also disabled hyperthreading in the BIOS.
    Using Windows XP compatibility settings for PSE somewhat improved the stability, but did not completely eliminate crashes.
    Additionally, it signnificantly slows down thumbnail generation and a progress indication window becomes visible during thumbnail generation, which is barely noticable in native Win 8.1 mode.
    Officially, Elements 11 is compatible with Windows 8.1.
    There is a knowledgebase article related to Elements 6, which recommends to disable multi-threading and to enforce execution of Organizer on more than one core.
    This reduces the problem a little bit, but thumbnailing more than a handful of files still leads to crashing.
    By means of the task manager, I analyzed the wait chain of the process PhotoshopElementsOrganizer.exe:
    Every time the fault occurs, it is caused by a deadlock in the wait chain.
    For example:
    PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540
    -- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932
    ---- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540
    PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932
    -- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540
    ---- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932
    Regards
    Oliver
    Microsoft Windows 8.1 Pro, 64bit, 6.3.9600 Build 9600
    Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz,
    16 GB RAM
    AMD Radeon HD5450, 1GB
    256 GB SSD,  Crucial M4-CT256 (Windows, Application, Swap and Temp files), NTFS
    1.8 TB HDD, WesternDigital, WD2002FAEX-007BA0, NTFS  (media store)

    Hi,
    I'm experiencing the same problem after importing MTS files.
    When you said that you unisntall all other codec, what do you mean?
    Codec Inside element software?
    I have desable the automatic thumbnail and it still crash.
    I'M running the software and trying to import more video files and the program keep crashing during the process of selecting the files in the directory to be imported.
    i went in my windows 7 journal and here is the error.
    System
    Provider
    [ Name]
    Application Error
    EventID
    1000
    [ Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2014-08-31T19:36:04.000000000Z
    EventRecordID
    244366
    Channel
    Application
    Computer
    Ordi-Denis
    Security
    EventData
    PhotoshopElementsOrganizer.exe
    11.0.0.0
    503fdd1d
    MSACM32.dll
    6.1.7600.16385
    4a5bda4e
    c0000005
    00004d91
    1634
    01cfc552c927dce5
    C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
    C:\Windows\system32\MSACM32.dll
    0b097e53-3146-11e4-a14e-bcaec51a14f7
    Please i need help since Adobe is not helping us.

  • Elements Organizer 10 - no audio AND no thumbnails on AVCHD files

    Hi All,
    I'm running Elements Organizer 10, and am seeing some strange behavior in that, since upgrading to 10 (from 9)
    - none of my .mts files will play any sound in the Media Browser viewer and
    - new .mts files that I import into the catalog have no thumbnails
    The files do have thumbnails in Windows Explorer.
    I can play the files, with sound, using both VLC and Windows Media Player.
    Importing the files in Organizer 9 did generate thumbnails and playback with audio.
    Premiere Elements 10 does generate clip thumbnails and successfully plays audio, too.
    So - it seems to be somthing very specific to version 10 and the Organizer - not machine-wide.
    I noticed that playback in the Media Browser viewer invoked the Haali Media Splitter I have installed on my machine.  Thinking that might be the wrong codec, I uninstalled it.
    I could still play in VLC and WMP, but double-clicking in Organizer gave an error message that no appropriate codec was installed.
    So, I installed ffdshow to see if that avc codec could be used, still no luck.
    Reinstalled latest version of Haali, back to same behavior (no audio, no thumbnails) in Organizer - everything else working.
    So, I can work by dragging the clips from Organizer onto VLC so I can play the video with sound while tagging, but I'm concerned that it's not working and that whatever the base problem will manifest itself more seriously later.
    Any ideas? 
    Thanks in advance!!
         Scott
    From Help | System Info
    Elements Organizer 10.0.0.0
    Core Version: 10.0 (20110831.m.17215)
    Language Version: 10.0 (20110831.m.17215)
    Current Catalog:
    Catalog Name: My Catalog
    Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
    Catalog Size: 70MB
    Catalog Cache Size: 750.4MB
    System:
    Operating System Name: Windows 7
    Operating System Version: 6.1 Service Pack 1
    System Architecture: Intel CPU Family:6 Model:10 Stepping:5 with MMX, SSE Integer, SSE FP
    Built-in Memory: 6GB
    Free Memory: 3.3GB
    Important Drivers / Plug-ins / Libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: 7.70
    Adobe Reader Version: 10.1
    Adobe Acrobat Version: Not installed
    CD and DVD drives:
    D: (TSSTcorp DVDWBD BUS: 2 ID: 2 Firmware: SH-B123L)

    Hi Steve,
    Thanks for the input... 
    I did go back and confirm that I'm running the latest QT for my machine 7.7 (1680.34) according to the QT Player. 
    Just in case, I re-downloaded the QT Installer and Repaired the installation. No change in behavior in Organizer.
    I don't think it's QT that is used for AVCHD files, tho, is it? I tried to play my video in the QT player, and it won't play .mts...
    Also, as others suggested, I did attempt to 'activate' the AVCHD plugin - but, didn't get any new popups or dialogs (it might have happened when I originally installed and I didn't pay attention to it)...
    I had previously right-clicked on a clip in organizer and selected "Edit in Premiere Elements...", put the clip on the timeline, played and scanned thru the clip, saved the Project.  But, based on yours and the other suggestions, (I did this a few times with different clips) I created a new project, Get Media from Files and Folders, loaded a clip, dragged to timeline, played/scanned, double-clicked to bring up the previewer in Element - everything works as expected.
    Back to Organizer - same behavior as before.
    Uninstalled Haali again, and tried all of the 'plugin activation' steps again.  No change except Organizer still complains of not having the required codec.
    So - for some reason, the organizer thinks it should use the Haali Media splitter as the codec for avchd - everything else on my machine seems to be able to find a more suitable codec - vlc, wmp, pre all work fine.
    Did some more surfing on the forums, and found some references to Premiere Pro using the Haali media splitter (?). 
    So, one other piece of info - Prior to Elements 9, I did have Premiere Pro installed on this machine.  Very nice, but overkill for what I want to do.  So, I uninstalled it prior to installing Premiere Elements 9.  Everything worked fine w/ 9, but not with 10.
    So - is there some way to determine which codec Organizer is using and/or force it to use a specific one?
    Is it possible (seems likely with the symptoms) that there was some configuration file or registry entry left over from Pr that is now directing Organizer to use the same codec that it previously used (instead of the default)?
    Thanks all!!  Normally I'd be able to figure this out, but am pretty new to 'the inner workings' of Pre.
    Thanks,
          Scott

  • Elements Organizer 12 doesn't generate thumbnails for .mpg videos produced by Premiere Elements

    I just upgraded from Elements+Premiere 11 to version 12, on Windows 8.1 x64.
    I produced a 1st .mpg file (HDTV 1080p 25 img/s), and imported it in Elements Organizer.
    Unfortunately, the Organizer doesn't generate any thumbnail for the file.
    This is a new "behavior" of the Organizer 12, because the Organizer 11 use to generate thumbnails properly.
    I tried to manually update the thumbnail (right click), but after waiting several seconds, there is still no thumbnail appearing.
    Olivier

    Olivier
    Here are the results from my test of your situation where you tried to import 3 Premiere Elements 12 created files into the Elements Organizer 12 after their creation and save to the hard drive.
    The 3 files from Premiere Elements 12 were
    Publish+Share/Computer/MPEG with Presets = HDTV 1080p25 High Quality
    Publish+Share/Computer/MPEG with Presets = HDTV 720p25 High Quality
    Publish+Share/Computer/MPEG with Presets = HD 720p25
    The same scheme was used for each, and the results were the same for each...
    Imported into Elements Organizer 12, File Menu/Photos and Videos/Files and Folders.
    In the Elements Organizer 12, each imported with a thumbnail displaying only a filmstrip icon.
    Next I double click the thumbnail and got playback of the video in the Elements Organizer 12 without issue.
    Next I right clicked the thumbnail and selected Update Thumbnail. It did within a few seconds. The thumbnail then displayed the first frame of the video.
    I ran this test on a laptop with Windows 8.1 64 bit computer operating system. Installed on this computer along with Premiere Elements 12...QuickTime latest version, iTunes latest version, a PowerDVD player. Windows Media Player 12 appeared to be there but not yet activated. No VLC player or other.
    For the moment I am assuming that codec were essentially from QuickTime and from what Premiere Elements 12 brought along.
    More later.
    ATR

  • Elements Organizer does not install when reinstalling PSE10

    I have a problem that I cannot seem to resolve. Previously Adobe Photoshop Elements 10 had been running flawlessly on my computer and was easily opened by clicking the desktop icon which had a "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photoshop Elements 10.0.exe" target. After uninstalling and reinstalling Photoshop Elements 10, when I click on the Desktop icon to start the application, I get a dialog box that says "The item 'Photoshop Elements 10.0.exe' that this shortcut refers to has been changed or moved so this shortcut will no longer work properly". If I right click the Photoshop Elements 10 desktop icon and check properties, the Target says "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photoshop Elements 10.0.exe". When I open Explorer and navigate to where the target says the application file should be, the "Elements 10 Organizer" directory does not exist. The only directory that does exist is the "Photoshop Elements 10" directory and it contains the 'PhotoshopElementsEditor.exe'. Yes if I click on that file the Editor opens, however when I try to load the Organizer workspace once the editor is open, it does not load because the entire folder and application is missing. I even tried searching the entire C-Drive to find the Photoshop Elements 10.0.exe file but it was nowhere to be found.
    To be specific, I had PSE8, PSE9, and PSE10 installed on my 64-bit Windows 7 Professional w/SP1 computer. I decided to uninstall PSE8 & 9 because I had just purchased PSE12 and wanted to make room for the PSE12 installation. When I tried to first uninstall PSE8, the uninstaller stopped with the warning that PSE8 was installed in the same directory as PSE10. The uninstall then terminated when I clicked on OK. Next tried to uninstall PSE9 and received the same warning and uninstaller termination. The same thing happened when I tried to uninstall PSE10. Faced with the situation that all three products were installed in the same directory and would not uninstall individually, I found it necessary to uninstall all three applications manually according to the directions on the Adobe's knowledgebase.
    To uninstall PSE8, PSE9, & PSE10, first thing I did was create a system restore point which is something I always do just in case something goes wrong. Then starting with PSE8, I first printed out the Photoshop Elements Help "Manually remove Photoshop Elements 8 | Windows that I found at http://kb2.adobe.com/cps/826/cpsid_82673.html. Subsequently I printed out the directions for each product, PSE8, PSE9, and PSE10, are all on the Adobe website. Next I followed the directions contained in each article except for running the product uninstaller as I mentioned above and removed all three applications then rebooted my machine.
    Next I reinstalled PSE10 and tried to open it only to find that it did not fully install especially the Elements Organizer. As mentioned you can open the Editor by going directly to the executable file however you cannot access the Organizer because it did not install and cannot be found anywhere on the computer. I have uninstalled and reinstalled PSE10 five time now each time using the product Uninstaller plus the "Manually remove PSE10" directions and I still cannot get the Elements Organizer to install.
    My question is does Adobe have a utility that can be run after manually installing a specific product that would find registry entries that were not removed after completing the manual removal process? The problem I see is the manual removal process which shows possible registry entries to remove manually is built on the assumption that you were able to run the Uninstaller which is not the case with my problem.
    Secondly does anyone have any suggestions on how to install both the PSE10 Organizer and Editor?

    I believe I found a solution but I need help in changing some of the parameters to reflect for a United States program install.
    If you go to "Elements 10 Organizer is not installed [SOLUTION]" at http://forums.adobe.com/message/4745941 you will note the Poster says it is possible to force the install of Elements Organizer 10 by using the command line:
    msiexec /i "E:\Adobe Photoshop Elements 10\ElementsOrganizer\Elements 10 Organizer.msi" TRANSFORMS=1031.mst ELEMENTS_DE_DE=1 ORGANIZER_DE_DE=1 STARTWATCHSERVICE=1 SUPPRESSREBOOT=0 NOT_STANDALONE=1 /l*v "C:\Users\<username>\AppData\Local\Temp\OrganizerInstall.log".
    I found that the above command line input does in fact start the setup for the PSE10 "Elements Organizer" Installer except it is in a language other than English.
    Is there anyone familiar enough with coding and command line prompts to change whatever paramenters are necessary to have the installer run in English.
    Hopefully there are some Adobe Staff monitoring this message that can answer the question for me.
    Message was edited by: DAllenJ2215

  • How can I import photos from iPhoto '09 to Elements Organizer 10 while keeping the tags attached?

    I have spent a ridiculously long time tagging photos in my iPhotos but I would now like to transfer all my photos to Elements Organizer and preserve all the work I had done.
    From Adobe's help website (http://help.adobe.com/en_US/elementsorganizer/using/WS73c05ee9864270ea-417df45c129593bfa05 -8000.html) it says I can import the tags along with the photos but does not explain how:
    "Elements Organizer 10 supports importing photos, along with their associated captions, tags, and ratings, from iPhoto. You also have the option to import information such as events and albums to maintain the organization of your library"
    When I follow the steps outlined on the website my photos are imported but there are no tags attached to them. I am particularly interested in keeping my facial tags but I suppose it would be useful to know how to keep other keyword tags and ratings as well.
    There was a previous question put out on the forums similar to this but it was unresolved and the person decided to just leave everything in iPhoto. I really would prefer to transfer all my photos to Elements Organizer. I don't like the way iPhoto organizes photos but I had to deal with it for several years before I bought Elements Photoshop with built-in Organizer.
    Please Please help!
    Many thanks
    D.M.

    You don't import one library to another.  Just copy the library from the iBook to the Pictures folder on shout new MacBook Pro. If you have another library already on the MBP rename it so you don't overwrite it with the old library.
    Launch iPhoto with the Option key held down and select the newly copied library and let iPhoto convert it to the new version.
    Do you have photos in the library on the new MacBook Pro that you want to combine with the older library?

  • How to export photos from Elements Organizer on Mac?

    I saw someone asked the same question and it seemed not to be possible with the Mac version. Surely this can't be possible as this must be one of the single most important functions in an Archving system.

    rugfoot wrote:
    The problem is I can't move them to a new folder. If I could I wouldn't have the export problem. I just dragging and dropping but it doesn't work. I have made a selection (15) of photos in Elements Organizer but I can't identify which ones they are (from 300) in the Mac Finder app (= Windows Explorer).
    Sorry, I can't test that on a Mac, but I thought that 'Windows only' features would be stated on the Adobe pdf help file, and moving file is not mentionned as Windows only, whereas 'export' is clearly stated as Windows only.
    http://help.adobe.com/en_US/elementsorganizer/using/elementsorganizer_10_help.pdf
    Chapter 7  - Move files in a catalog
    Edit,
    By the way, the very useful faq list in the right panel of this forum links to PSE9, not PSE10 for the location of the guides.

  • Jitter, stutter, or jerky playback on output

    Hi friends,
    I've edited a video in Premiere Pro CS4 and it plays smoothly in the timeline. However, when I export it for DVD output, and then preview it in Encore, every minute or so, it will play one frame out of order. I don't know whether to describe this as a jitter, a stutter, or jerky playback. The preview is accurate: if I burn a DVD from Encore, the DVD will have the same glitches in playback. Again, Premiere plays everything fine.
    The frame can be pulled from before or after the current point in the timeline. The first glitch occurs at 08s 15f and plays frames in the clip in this order: 1,2,3,4,17,6,7,8,9... Then it goes to 01:24:15 and partway into another clip does this:
    24s:14f
    24:15
    24:00
    24:01
    24:16
    25:02
    24:17 (back to normal)
    Both of these clips with these symptoms have a lot of movement (people moving independently in the frame, plus camera movement), but there are other clips with nearly as much movement, and they do not have a problem.
    The source footage is AVCHD 720 30p in a matching timeline. I do have some SD footage later in this timeline. This SD footage was captured to the computer via Firewire from a Canon Optura. It is "Scaled to Frame Size" and rendered in the timeline, and is causing zero problems. I exported using the Media Encoder. I am outputting to DVD using the MPEG2-DVD and NTSC Widescreen preset, with the aspect ratio changed from 16:9 to 4:3 and the quality set to 4.5.
    I'm running Premiere Pro version 4.2.1 and Encore 4.0 on an Intel Core 2 Duo T9550 2.66 GHz with Windows 7 (64 bit), 4 GB RAM, a 5400 RPM 320 GB hard drive running the OS and the video files located on a USB 2.0 7200 RPM hard drive.
    If any of you have ideas, I would be grateful.
    Thanks,
    Russ

    I've been having this problem since installing Snow Leopard with QuickTime 10 way back when and it's caused me real problems with video rendering. I think it's a codec issue as my raw video files play back ok (H.264 codec), but when I export them and save as Photo jpeg or motion jpeg etc the playback has about 4 or 5 seconds of jerky playback near the beginning of the file.
    I've just tried opening all my test files with QuickTime v7 and was staggered to see them all run perfectly. It is indeed very annoying.

  • What is new in Photoshop elements organizer

    Are there any changes to the photoshop elements organizer from version 8 to 9

    I agree.  In some ways it is a real step backward.  I would not recommend "upgrading" to
    PSE9 based on one day of working with it.  Lost the ability to see all files in folder view and it is
    EXTREMELY SLOW.
    I really wish I hadn't changed to PSE9 and converted my catalog, which it didn't fully convert properly.
    Stay away from this upgrade!

  • How do I uninstall Elements Organizer while keeping Elements.

    Organizer has messed up the alphabetical sorting of my thousands of files even while viewing them with Picasa viewer.
    This is truly unbelievable.
    So far, the thousands of Google hits concerning uninstalling Organizer have returned either asinine replies or Rube Goldberg contraptions.
    I'm a newbie in Elements/Organizer after deciding to go the paid way instead of using GIMP/Picasa and other freebies for I don't know how long..
    What a disapointment! What a let-down!

    You can't uninstall the organizer and keep the editor, but you don't have to use the organizer. Many people don't. Just use file>open in the editor instead.

  • Window 8.1 is not allowing Elements Organizer 11 to import pictures from SD card into Organizer

    After installing Windows 8.1, I am no longer able to import pictures from SD card into Organizer as Elements simply stops working after Import from Card reader is selected. Obviously I am shutdown from importing pictures.

    Windows 8.1 is not allowing Elements Organizer 11 to import pictures from SD Card in card reader into Elements Organizer. The Elements Program goes to a blue circle and the program times out.
    I have:
    Tried different SD cards
    Tried different card readers,
    I can import off files or folders. However card reader does not show up on this menu within Elements.
    There is obviously some workaround that could be contemplated BUT Elements Organizer cannot import from SD card in card reader and this is a very inconvenient situation.  It worked fine in Windows 8.0.
    I would appreciate a reply. Thank you.

  • Max files in Photoshop Elements Organizer

    Hello,
    I have few questions:
    1/
    Following this thread, I am wondering what is the limit of PhotoShop Elements Organizer V8 ?? How many pictures can we insert into ONE catalog ?
    2/
    I currently have 6000 pictures that I would like to import into PhotoShop Elements Organizer V8, from Adobe PhotoShop Album V1.
    Is this possible ? I tried with the trial version, but I have an error when converting the .psa file from PhotoShop Album V1, asking me to try to consolidate or repair the file in the previous program (but it works well in PhotoShop Album V1).
    Any idea ?
    3/
    Is the trial version the same than the paid one ? I mean: if I start using the trial, inserting tags and so on, should I uninstall it when buying the full version or could I just buy a serial number and inserting it to unlock the trial ?
    Thanks a lot,
    Kamayana

    John,
    You are just MARVELOUS !!!! That's awesome: your website, the informations listed in it, the work you do here on the forum !!
    Wow !!! I will purchase this product just for your support. Can I pay you to obtain a support and pay you the software ? Lol
    You replied to all my questions !
    For 2/, I read before your FAQ (I thought it was Adobe FAQ, I did not pay attention to the URL), I tried it without success (excepted item 9/ which is not possible for me, since PhotoShop Album does not allow writing metadata to files, but maybe your small program can do it ?) ...
    But since I do not give up like that, I done the following, you might add it to your FAQ ?
    1/ I used the dichotomy method. I was sure that some files gave problems. So, my 6000 pictures have been separated into 6 albums (1000 each). Then, I run the converting tool on each one. All worked, excepted one. This one, I share into 500 pictures each. I run the tool on each one. One was OK, the other one fail. The one which fails has been separated in 250 pictures each... And so on. Until you see which pictures cause problems... In my case, it was some modified pictures (2 of them).
    Then, I eliminate this 2 pictures from my initial 6000 catalog, I do the import again, and... SUCCESS !!
    Hope it might help someone else.
    Kamayana

  • Why don't I have an Advanced Dialog box in my Elements Organizer - Photo Downloader? I am using PSE9

    Why don't I have an Advanced Dialog box in my Elements Organizer - Photo Downloader? I am using Photoshop Elements 9.

    ok, thanks a lot for your answer.
    2012/5/17 Barbara B. <[email protected]>
       Re: Why don't I have an Advanced Dialog box in my Elements Organizer -
    Photo Downloader? I am using PSE9  created by Barbara B.<http://forums.adobe.com/people/Barbara+B.>in
    Photoshop Elements - View the full discussion<http://forums.adobe.com/message/4417133#4417133

  • Jerky playback in Bridge CS4

    I get jerky playback of Hi Def mov files shot on my Canon 7D when playing them back through Bridge. The same movies play smoothly with no stuttering whatever on the same machine through Nero or any other player I have installed. According to my camera manual, the frame rate of these movies is 25 fps (I am in the UK using the PAL TV system) and so I set Bridge to play back at this rate (it was originally set to something like 29.77) but that made no difference. Is Bridge using a different codec or what?

    Bridge uses Quicktime, so any performance issues wil lhave to be attributed to that, most likely.
    Mylenium

  • Lightroom versus PhotoShop Elements Organizer and Bridge

    This is directed to the Adobe Developer Team
    I hope someone of the Developer team is reading this!!
    For my understanding the three products out of one house (PhotoShop Elements Organizer, Bridge and Lightroom) doing about the same, should ...
    work the same (same idea, same behaviour, organizing by path/subfolders instead of cataloges etc.)
    maintain the same database and files (LR should recognize the collections from BR and Vice Versa, use the same cache files etc.) and should
    be compatible to each other (e.g. Tags, Collections etc)
    Actually I suggest ADOBE
    to eliminate Organizer and integrate the good functions into BRIDGE (e.g. albums, upload to flickr, webpage generation etc)
    give BRIDGE as the free of charge picture organizer to PS Elements and to PS CS
    change LIGHTROOM into an payable upgrade of BRIDGE with enhanced functionality of the free of charge BRIDGE, (which can work as a stand-alone software as it does today
    better integration of PSE, PS CS into Bridge/Lightroom (e.g. Panaorama function opens only PS CS but the version of PSE works much better, so I want to choose in the menu of Bridge/Lightroom)
    I am really struggling with the three of them.
    Beside that I suggest to get rid of the Catalog idea of Lightroom with it's import/export and synchronization needs and instead use or at least integrate the idea of BRIDGE to get pictures structured and organized by path and subfolders, as this is anyhow how the way pictures are stored already for most of us... I asume. I doubt that anybody just throw all files into one big subdirectory and get the organized into cataloges. But please keep collections as they are helpful to quickly collect some pictures to commonly work on them. by drag & drop. The Catalogues of LR drives me crazy but LR have a lot of nice functions (e.g. Webupload interfaces to flickr and others, nice noice reduction, nice albums and webpage functions, etc.)
    Thanks
    Merry X-Mas and a Happy New Year
    Georg
    PS: Please all of you comment your experience and opinion on this matter ... I am interested what you think about it.

    Hi George,
    Whereas Bridge and Photoshop Elements (and most non-LR users) base their organisation on the file / folder structure, Lightroom uses files / folders simply for storage - the catalog is used for organisation. This 'catalog based approach' provides far more flexibility, both in organisation, and in recording a complete, fully-reversible record of all edits made to each photograph.
    To suggest that Adobe "get rid of the Catalog idea of Lightroom" and "get pictures structured and organized by path and subfolders" would remove almost ALL advantages Lightroom has over Bridge & PS Elements combined. To fully appreciate Lightroom, you need to appreciate that files and folders are not the only way to organise photos. Why not watch a few of the Adobe Lightroom Tutorial videos? This link below takes you to a video explaining about the Catalog;
    http://tv.adobe.com/watch/george-jardine-on-lightroom/the-lightroom-catalog/
    However, if you really want Adobe to hear your views, why not raise a Feature request with them, at this link below;
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    I'm sure if you call your feature request 'Remove Catalog from Lightroom, and organise by Folders instead', it'll get noticed, as will any forum posts of the same name...
    Cheers,
    Alan

Maybe you are looking for

  • My iMac will not boot past the logo and spinning gear

    My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anyth

  • Keynote with Iphone.

    Can you use bluetooth to control iPad (Keynote) with your iPhone? It works perfect on wifi but I do not always have that. If so, how? Is there a remote that would work? Thanks

  • FI and SD integration

    Hello, We are doing SD invoice but we don't want to send any data into COPA what should we do but we need to turn the COPA on as we are sending the data from FI.The reason for this is we do very few invoices  in SD and we don't want to capture those

  • Magic Mouse Keep on disconnecting for mba.

    my Magic mouse keep on disconnecting from mac book air, few day back I bought a brand new one but still the same problem. it's keep on discoonecting. every time i have to manually go to bluethooth and connect again. Any one else faced the same proble

  • Have new computer with new Windows 7, Palm m105, and 4.1.4 palm desktop, trying to get it to synch correctly.

    With new computer I have had to add a USB serial converter to the hot synch cradle. I spent most of the day trying to get the new serial converter to be recognized so that a synch could be performed. It now will synch when I put the palm in the cradl