JES4 Gateway issues

I'm having a gateway,rewriter proxy for my portal server 6.3. All the copmonenst are JES4 version. When I try to access the portal desktop, I get the following error:
Unable to connect to host - Session: Unable to connect to host: xyz.abc.com
The message in /var/opt/SUNWps/debug/srapGateway.empl is:
Response
HTTP/1.0 502 Bad Gateway
Date: Thu, 05 Oct 2006 19:22:04 CDT
Pragma: no-cache
Server: sun.net
Allow: GET
Content-Length: 193
Content-Type: text/html;charset=ISO-8859-1
Connection: close
If I restart the gateway and rewriter proxy, I get the login screen for the first time only. Upon subsequent requests the same error message repeats. All the certificates are valid. If anybody happened to come across this problem, pleease let me know how it can be resolved. Is it something to do with the portal patches? Appreciate your response.
Thanks in advance,
--laks

We got it working. It was due to a security patch 119213-09. We backed it out and rebooted the box that resolved the issue.

Similar Messages

IPv4 Gateway Issue? - HP LaserJet 400 M401dn / 400 MFP M425dn

Hello,
I work in healthcare and in our environment we have mostly HP LaserJet printers. Within the last 6 - 12 months we have started using some HP LaserJet 400 M401dn and HP LaserJet 400 MFP M425dn printers. They all have been updated with the latest firmware (20 printers) and connect to the network via ethernet using IPv4. We are having an issue when trying to print to them from a specific application. It's only happening on these particular models. All other HP LaserJet printers DO NOT have this problem (HP LaserJet 2015dn, 2055dn, P4015dn, 600 M602dn). The application is a telnet client using SSL that connects to a server. This server is on a different subnet (128.1.x.x) than the printers (10.92.x.x) that the clients print to.
It is possible to 'ping' the printer within the application using the printer hostname or IP address. The problem is, there are times when the printer status says 'Ready', and we can ping the printer from within the Windows operating system (Win7 Pro), but we cannot ping it via telnet SSL client. There is no response. The result is, we cannot print from the application to these printers. This problem isn't consistent either. There are times when it does work!
If we assign the printer to the same subnet as the application server, the issue appears to go away. Unfortuantely this is not a feasible permanent fix for us as the printers need to remain in their current subnet.
Sleep Mode is disabled on all of these printers. IPv4 settings are all correct and have been verified by various IT staff.
We believe there is an IPv4 gateway issue within the NICs on these printers. Has anyone ever had a similar issue? Are there any other additional details that I should provide which might help resolve this issue?
Regards.

To start off, the issue you are having may be caused by the softare you are using or the HP software. I am gonig ot to do some investigating to find out. I will want to to make sure that the softare is the most current version, follow the link below and reinstall if necessary (do not rely upon the CD-ROM):
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5096244&lang=en&cc=us...
Then if it is the same or you are still having issues I would recommend trying to use the PCL6 drivers for this. They offere a broader support to some of the more code specific programs :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Run through that and let me know how it goes, I'll get right back in touch with you!
-Spencer
PS :: Can you print to this printer from other programs? Have a wonderful day!

RDS and Gateway issues: Cannot get remoteapps to run without opening port 3389 on firewall

I am testing the setup of a small RDweb server to host QuickBooks for some remote sales users (4 users). For the most part, I have everything installed on one virtual server (using 2012r2 "Quick Start" session host deployment with the additional
Licensing and Gateway server roles added to the same server).
Everything works excellent with one exception. External clients cannot launch published apps without having port 3389 open on the firewall, even with the gateway role installed and the 'Deployment Properties' set to use the gateway. They can properly connect
to the RDweb site and view the published apps. The only way it works is open the firewall port (at which time I can disable the gateway or leave it configured and it works either way). Internally, everything works accordingly. I have followed the steps outlined
on many sites and have combed though the forum here to no avail.
Error received (summarized but is a well documented error):
remote desktop can't connect to the remote computer: 1- Your user account is not listed (it actually is) or 2- You might have specified the remote computer in NetBios format . . etc.
This is an existing SBS 2011 environment with additional virtual servers setup to host QuickBooks as outlined below:
Current setup:
Used Quick Start to install Remote Desktop Services in hosted sessions mode
Installed the additional roles for Licensing and Gateway server on same server
Configured wild card public certificates on all four services (Connection Broker(2), Web Access and Gateway)
Configured internal DNS to properly lookup our external FQDN of this server (ex. quickbooks.contoso.com points to quickbooks.contoso.local
One thing I noticed (just now) when I launch a published app and the firewall has port 3389 closed, a dialog box pops up directly after launching the app that warns about running a RemoteApp program and mentions the Remote Computer and the Gateway Server
as both the same (which it is); however, I would have assumed one would have listed the internal server's name while, instead, both are listed as the external FQDN. Either way, internal DNS should still allow it to properly route . . no? I don't know . . I'm
sure I am just missing something in a routing configurations somewhere. The gateway service is not properly looking up the RDweb service and then seeming not routing the encapsulated RDP session through HTTPS. . .. is my guess . .
I was reading about the "set published name" commandlet; however, I am not experiencing a certificate name mismatch; however, the certificate name does show up as *.contoso.com versus the actual name. I may just be grasping as straws now . . :)

Ok, while I was in the server and looking over the BPA scans: "The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name." This may be due to it showing up as *.companyname.com
versus quickbooks.companyname.com. Anyhow. .. on to the list of actions above:
Changed RD RAP from "Select Active Directory" group to "Allow any network resource" and tested with port 3389 closed on firewall:
Worked. Initially it did not as I had used a custom shortcut created from earlier; however, after logging into the RDweb site again, the application loaded fine now (after the RD RAP change)
No error message appeared; however, I did notice that for a split second, the word Error did appear in the browser's tab title, but only very shortly. The app launch does take a bit longer too now (about 10-15 seconds, up from about 4 seconds with the port
open). This, I could care less about so long as we are properly forwarding the traffic through the gateway.
As for log entries, I had spend quite a bit of time in there and only had minor issues with loading user profile setting taking too long and policy settings preventing the redirection of USB devices. Looking again, no issues still. Just a bunch of informational
entries where I would connect before (and disconnect) but only with the port on the firewall open; otherwise, there was not an entry corrolating to when I would receive an error before. Now though, I am connecting after the RD RAP change and logs are showing
connections even with the port closed. These are in "operational", the "admin" log only shows the update to the RD RAP configuration.
Yes, the LAN's DNS server does relay the lookup information for my public FQDN as the local LAN address. No need for a local host record.
I have now added a new rule in our firewall to allow and forward UDP port 3391 traffic to the internal server hosting remote services
Thank you very much for your assistance on this matter. The RD RAP rule was default built during the creation of this services. Why is the resource not cross-referencing AD security groups? I could have sworn I created a group for that . . .

OWSM gateway issue

Hi,
Oracle SOA suite version: 10.1.3.1.0
I started the OWSM with the quick start tutorial. Instead of using the time service I used another service deployed. When I started I had created a gateway which I then deleted.
Then I created a new gateway and done the steps specified by the tutorial.
The problem is occuring when I try to access the proxy wsdl url.
It giving an error :-
Oracle Web Services Manager Gateway C0003001: Cannot find WSDL for service "SID0003006"
The component ID of the Gateway is C0003001 (which I had deleted), the component ID for the gateway should be C003002..
What can I do to fix this issue?
Thanks and Regards,
Sashwat

Hi Mathias ,
Oracle SOA suite version: 10.1.3.1.0
I started the OWSM with the quick start tutorial. Instead of using the time service I used another service deployed. When I started I had created a gateway which I then deleted.
Then I created a new gateway and done the steps specified by the tutorial.
The problem is occuring when I try to access the proxy wsdl url.
It giving an error :-
Oracle Web Services Manager Gateway C0003001: Cannot find WSDL for service "SID0003006"
I have updated the gateway.component.id with C0003007 the next possible component ID in gateway-config-installer.properties located in OH/owsm/config/gateway and then redeployed the gateway successfully.Now I am getting a little bit different error :
Oracle Web Services Manager Gateway : Cannot find WSDL for service "SID0003007"
I deleted all other gateways and this is the only gateway remaining.
Please tell me another way to fix this.
Thanks and Regards,
Vargab Pathak
Message was edited by:
Vargab

Lion Server Gateway Issues

Hello,
I have a perplexing issue with both my own server and a client's server. In both cases I am trying to configure a Lion server as a gateway (Firewall, DNS, DHCP, NAT) and I am unable to get the services working consistently. If I am able to get my server(s) functioning as gateways I lose DHCP any time the service restarts.
I have been able to reproduce this issue on two separate networks in two different locations on two separate static IPs with both a Mac Pro and a Mac Mini.
1. I setup reverse DNS with both ISPs.
2. I began with a fresh 10.7.0 server installation from the recovery partition, the I configured my static IP address and FQDN during the Setup Assistant, rDNS checked out fine, and after the assistant was done I immediately ran updates.
3. After restarting I configured my DNS. I setup a machine address for the server and linked my FCDN to my static IP address.
4. I downloaded Server Admin Tools 10.7.2 from http://support.apple.com/kb/DL1457 and installed them. I ran Software Update again to make sure the system was completely up to date.
5. Using Server Admin I enabled NAT and ran the Gateway Setup Assistant.
6. After running Gateway Setup Assistant the LAN was unable to obtain IP addresses via DHCP. Devices connected to the LAN had self-assigned IP addresses.
7. I opened the Firewall for both "any" and "192.168.1.1-net" by allowing both IP address groups to allow all traffic.
Still no luck. A little Googling and I found http://support.apple.com/kb/TS3887 - "Unable to connect to the Internet after running NAT Gateway Setup Assistant".
8. I follwed the instructions in TS3887 and my LAN was still unable to obtain an IP address via DHCP.
After 3 days of trial and error I have found that my DHCP settings are being reset whenever I start/stop/start DHCP services. Whenever I restart the DHCP service I get one of the following error message sequences in /var/system.log:
Jan 25 16:19:43 server servermgrd[71]: servermgr_dhcp:bootp config:Error:Unable to read configuration file - error 2 (No such file or directory)
Jan 25 16:19:43 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created default configuration file
Jan 25 16:19:43 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created 2 default subnet records
or
Jan 25 16:15:50 server serveradmin[4843]: servermgr_dhcp:bootp config:Error:Unable to read configuration file - error 2 (No such file or directory)
Jan 25 16:15:50 server serveradmin[4843]: servermgr_dhcp:bootp config:Notice:Created default configuration file
Jan 25 16:15:50 server serveradmin[4843]: servermgr_dhcp:bootp config:Notice:Created 1 default subnet records
As it turns out, something is overwriting /etc/bootpd.plist:
sh-3.2# ls -al /etc/bootpd.plist
-rw-r--r-- 1 root wheel 1536 Jan 25 16:20 /etc/bootpd.plist
sh-3.2# serveradmin stop dhcp
dhcp:state = "STOPPED"
sh-3.2# ls -al /etc/bootpd.plist
-rw-r--r-- 1 root wheel 1132 Jan 25 16:47 /etc/bootpd.plist
I have no idea why Server Manager believes that /etc/bootpd.plist does not exist but I began to notice some strang behavior while working on the problem.
- While DHCP was turned off in Server Admin devices on my LAN were often able to obtain IP addresses through BootP.
1. I could use Server Admin to start DHCP but it would fail and create two new subnets, one for my WAN and one for my LAN. Although no subnets were enabled decices on my LAN would obtain IP addresses through BootP. I could then start DHCP with none of the subnets enabled.
2. If I enabled the LAN subnet and restarted DHCP Server Admin would fail to start DHCP. I could try again and DHCP would start with no subnets enabled.
3. If I stopped DHCP the system would again reset my /etc/bootpd.plist and I woudl be left with one subnet for my LAN. This subnet was enabled by default.
4. If I stopped DHCP the system woudl once again reset my /etc/bootpd.plist and I would have one subnet for my WAN. This subnet was disabled by default.
And then this loop would continue in slightly different variations indefinately. Here is what my log looks like while this is happening:
Jan 25 17:09:04 server servermgrd[71]: servermgr_dhcp:bootp config:Error:Unable to read configuration file - error 2 (No such file or directory)
Jan 25 17:09:04 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created default configuration file
Jan 25 17:09:04 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created 1 default subnet records
Jan 25 17:09:13 server servermgrd[71]: servermgr_dhcp:bootp config:Error:Unable to read configuration file - error 2 (No such file or directory)
Jan 25 17:09:13 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created default configuration file
Jan 25 17:09:13 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created 2 default subnet records
Jan 25 17:09:25 server bootpd[5726]: server name server.perfecteden.com
Jan 25 17:09:25 server bootpd[5726]: interface en0: ip 192.168.2.1 mask 255.255.255.0
Jan 25 17:09:25 server bootpd[5726]: interface en2: ip 173.160.121.37 mask 255.255.255.252
Jan 25 17:09:25 server bootpd[5726]: DHCP REQUEST [en0]: 1,d0:23:db:a6:77:d <iPhone>
Jan 25 17:09:25 server bootpd[5726]: ACK sent iPhone 192.168.2.9 pktsize 300
Jan 25 17:09:25 server bootpd[5726]: service time 0.001889 seconds
Jan 25 17:09:25 server bootpd[5726]: DHCP REQUEST [en0]: 1,d0:23:db:a6:77:d <iPhone>
Jan 25 17:09:25 server bootpd[5726]: ACK sent iPhone 192.168.2.9 pktsize 300
Jan 25 17:09:25 server bootpd[5726]: service time 0.000943 seconds
Jan 25 17:09:27 server servermgrd[71]: servermgr_dhcp:bootp config:Error:Unable to read configuration file - error 2 (No such file or directory)
Jan 25 17:09:27 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created default configuration file
Jan 25 17:09:27 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created 2 default subnet records
Jan 25 17:09:37 server servermgrd[71]: servermgr_dhcp:bootp config:Error:Unable to read configuration file - error 2 (No such file or directory)
Jan 25 17:09:37 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created default configuration file
Jan 25 17:09:37 server servermgrd[71]: servermgr_dhcp:bootp config:Notice:Created 2 default subnet records
The only times it seems that DHCP is working is when it is off... which does not make any sense.
Here are some screenshots:

I don't know if it's directly related, but your setup is wrong. That could be why the config is resetting.
On your 'internal' interface you're manually setting the IP address to 192.168.2.1/255.255.255.0, and that's fine, but this interface should have NO router address specified. In your case you've set the router address to the server itself, which is never going to be accurate.
Secondly, the DHCP settings don't have a router address set. This means that your DHCP server will hand out addresses to clients, but won't tell them how to get to the outside world. Hardly seems appropriate to me.
In your DHCP settings you should set the router address to the address of your NAT server (in this case 192.168.2.1).
Try those fixes and see if it makes any difference.

Remote Web Access (remote desktop gateway) issue with WHS2011

I have been using Remote Web Access on my Windows Home Server 2011 for several years with no problems. Over the past several weeks, though, I have been receiving an error when I try to connect to a computer through WHS's Remote Web Access:
"...the Remote Desktop Gateway is temporarily unavailable." Interestingly, when I try to connect from a Windows 8.1 computer, I just get a dialog box that says "Initiating connection," but the connection is never established. I cannot
find any relevant errors in any of the event logs.
I have read numerous articles relating to WHS configuration and port forwarding, but these do not have any information that addresses my situation. I have ports 4125, 80, and 443 forwarded to my Home Server. As I said, everything has been working fine with
this configuration until several weeks ago -- I suspect it might have something to do with a .NET Framework 4.5 update that was recently installed (and that has now been uninstalled), but that is the only change I can think of.
Any help would be greatly appreciated! Thanks!

Hi,
As you have commented that after installing .Net framework you are facing this issue. So after uninstalling still you are facing the same issue. Apart from installing .Net framework 4.5, have you installed or done any other change on your server?
Here you can check that “Remote Gateway Service” is running. Please check and restart the service if it’s stop. Apart you can check below 2 article for more detail step.
1. Can’t connect to the remote computer because the Remote Desktop Gateway server is temporarily unavailable error via SBS 2011
2. This computer can't connect to the remote computer because the Terminal Services Gateway server is temporarily unavailable (Try to perform the steps as suggested for
WHS 2011)
Hope it helps!
Thanks,
Dharmesh

Portlet Preferences Gateway Issue

I have a custom portlet, I am setting 2 custom preferences:
PortletResponse.SetSettingValue(SettingType.Admin,"URL", TextBox1.Text);PortletResponse.SetSettingValue(SettingType.Admin,"Count",TextBox2.Text);These settings basically Set the URL and Site Count for a List. I have built this using the Plumtre EDK, and .net.I have a remote Server, IE not in the same Domain as the corporate portal server. The Preference work great. The portlets render fine everything is wonderful.When I place the code on our Production environment, the initial preference page loads with the gateway, but during postback where I am setting the Preferences above, I get a Gateway exception error. When I look at the URL of the preferences I do indeed see a 'Local' non gatewayed server in the URL. (When I use a server not on our Domain the preference are gatewayed." Has anyone run into this before..I haven't seen it, bugging me!

Hi Terry,
à
I can ping the server with no problem when using the ip address, I can not do it using server name.
Generally, it seems to be a DNS issue. on current situation, please run
SBS BPA and check if find some related issues. Then, please use
Nslookup tool to troubleshoot DNS problems. Meanwhile, please run
DCDIAG /TEST:DNS to validate DNS health. In addition, would you please let me know how configure DNS?
How To Install and Configure DNS Server in Windows Server
2003
Please also open Event Viewer and check if can find some events or errors. Those may help us to go further
analyze.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

SCOM 2007R2 Gateway Issue.

We always facing issue on one of the gateway which are to communicate with SCOM master server. In the event log, we only found the event 21023 and error 2000 as below. Everytime this issue occur, we have to restart the SCOM serivces on the SCOM master server
which causing the monitoring outage. Anyway to fix it permanently without have to restart the SCOM serivces on the SCOM master server?

please try this
1.Stopped the System Center Management Service
2.Deleted the Health Service Stated folder
3.Started the System Center Management Service
http://blogs.technet.com/b/thomase/archive/2010/10/29/event-id-21023-management-server-not-downloading-configuration-files.aspx
Roger
tried them before but no luck by perform the those steps. we never try to reboot the gateway servers but we only can solve them by restarted the SCOM services on the SCOM master server which will cause the monitoring stopped for period of time

Has 10.7.2 Server fixed Network Gateway issue?

I upgraded our server when Lion was first released to discover that the it completely broke the network gateway - I have since reverted back to 10.6.
Has 10.7.2 fixed this issue? Is it save for me to upgrade yet?

Don't upgrade. It is not safe. Stick with SLS.

Integrated SOA Gateway issue: SOAP UI call ends with error

-- EBS 12.1.3 (no upgrade, directly installed.. is a test instance)
Hello, i need help in calling a deployed webservice in Integrated SOA Gateway in EBS.
-> Setup SOA Gateway is done.
-> FND_PROFILE PL SQL API is deployed as a Webservice.
To test the webservice i have taken the soap ui tool an send follwowing Request XML:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:fnd="http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_profile/" xmlns:get="http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_profile/get/">
<soapenv:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" mustUnderstand="1">
     <wsse:UsernameToken>
     <wsse:Username>asadmin</wsse:Username>
     <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">welcome</wsse:Password>
     </wsse:UsernameToken>
     </wsse:Security>
     <fnd:SOAHeader>
          
<fnd:Responsibility>APPLICATION_DEVELOPER</fnd:Responsibility>

<fnd:RespApplication>FND</fnd:RespApplication>

<fnd:SecurityGroup>STANDARD</fnd:SecurityGroup>

<fnd:NLSLanguage>AMERICAN</fnd:NLSLanguage>

<fnd:Org_Id>204</fnd:Org_Id>
</fnd:SOAHeader>
</soapenv:Header>
<soapenv:Body>
<get:InputParameters>

<get:NAME>USER_ID</get:NAME>
</get:InputParameters>
</soapenv:Body>
</soapenv:Envelope>
The Responce is saying:
<faultstring xmlns="">Error occured while service was processing.</faultstring>
In the SOA Monitor i can see all Requests being send from SOA UI. The detail error message says:
oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: Exception returned from JCA Service Runtime. file:/opt/app/OMSOAF/inst/apps/OMSOAF_sf2p-dev-oapp1/soa/PLSQL/2678/GET.wsdl [ GET_ptt::GET(InputParameters, OutputParameter) ] - WSIF JCA Execute of operation 'GET' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec due to: Error while setting JCA WSDL Property.
Property setIRepOverloadSeq is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec Please verify the spelling of the property.
nested Exception is: ORABPEL-12532 Error while setting JCA WSDL Property................
Do anyone has an idea?
Thank you in advice!

Hi Yilmaz,
Am also facing the same issue while am invoking standard/custom web service from soapui....is this issue is fixed in your case, if issue fixed, please post the resolution point how you are fixed. please post the solution ASAP. Otherwise do we have any metalink note on this to fix the issue. please share me the details.
Regards
Santhosh Kumar. K

Modified NT CWS - Gateway Issue

I am attempting to build a modified NT CWS for a special situation I have. I have a series of HTML documents, stored in a root folder. Several of these documents contain hyperlinks to other files that are stored in a sub-folder of the HTML documents.
The problem is, once all of these HTML documents, folders, and other files are crawled using a mirrored NT crawl, the links no longer work. The links are trying to access the internal server directly instead of going through the gateway.
I have made a copy of the out-of-the-box NT CWS and have changed the web.config file to use the gateway. I have added the base gateway url to the web service settings, but the link in the HTML documents is still not being changed upon crawl.
I have deleted all of the documents from the knowledge directory and have cleared the crawler deletion history to make sure I am not looking at old data, but the links are always absolute urls to the internal server and never use the gateway?
Any suggestions as to where to look?
Thanks-- Jeff

Is your new Data Source registered to "gateway documents"?
Are the URLs returned from your CWS inside the gateway space of the Web Service registration?

LiveCycle 2.6.1 Data Management with The ColdFusion 8.0 DataManagement Event Gateway Issue

Hello all,
I've recently been developing a project that involves sending out events from ColdFusion to LiveCycle 2.6.1 using the Data Management event gateway to Flex 4.0 clients (LiveCycle and ColdFusion are on different Instances, but the same server). To begin with, I used ColdFusion assemblers, DAO's, and models and everything worked fine locally. After deploying this setup to a beta site, I decided that this setup would be very troublesome in terms of configuring clustered instances across multiple servers. I then decided to convert my assemblers, DAO's, and models to Java. The conversion went well and the flex clients see the exact same data as they did with the ColdFusion adapter.
Once I tried to send an update through from my ColdFusion application to a Flex client, I get an error stating that:
"Unable to find the Flex adapter for destination My_Dest in the RMI registry on localhost:1099.The Flex adapter may not be running or the destination may be incorrect."
After seeing this error, downloaded a Java-based RMI inspector to see what was going on. To get a good idea of what was happening when the ColdFusion adapter was being used, I switched my data-management-config file back to the CF adapter. I noticed that the RMI entry was as follows:
localhost:1099/cfdataserviceadapter/My_Dest
localhost:1099/cfassembler/my_cf_instance
Once I gathered this data as the base, I converted back to the Java adapter in my data-management-config file, restarted the servers, and ran the RMI inspector again. Only the "localhost:1099/cfassembler/my_cf_instance" was showing. (This one shows because I have "Enable Remote Adobe LiveCycle Data Management Access" checked in my CF instance's CF Admin -> Flex Integration). Since I don't need this checked anymore, I unchecked it and re-ran the RMI inspector. As it should, the "localhost:1099/cfdataserviceadapter/My_Dest" went away. Since no destination shows up, it means that the Flex adapter isn't registering my "my_Dest" destination with RMI. Since it isn't registered, I can't see it when I try to send a message through the CF Data Management event gateway.
Can anyone help me out here? I certainly may be missing something when it comes to RMI (I don't work with Java very often). Any advice would be greatly appreciated!
Thank you,
Dustin Blomquist

Dustin,
Without the ColdFusion based data management destination defined on the LCDS server, the destination will not show up in the RMI registry. It is only the CF adapter code that does this. The 'stock' LCDS adapter does not support invoking via RMI the way the CF version does.
I would recommend you run the LCDS MessageBrokerServlet inside the ColdFusion web application. This will give you two things:
1. You will not have the overhead of RMI between CF and LCDS as they will share the same VM (better performance!).
2. You will be able to use the CF Data Management Gateway to pass messages to Java-based destinations. The APIs the gateway uses should work fine with either CF or Java based Data Management destinations.
The CF/LCDS integration doesn't support what you are trying to do when you run two seperate instances.

RD Gateway issue from Mac Remote Desktop client - 503 RPC Error: c0021012

I have an employee who is able to use the Mac Remote Desktop client to connect to her office PC via RD Gateway, but after a short time she consistently has her connection dropped with a
503 RPC Error: c0021012. I've researched this a little and apparently it refers to an expected shutdown condition (RPC_P_CONNECTION_SHUTDOWN) rather than a true RPC "exception". Also, the error almost always occurs exactly
10 minutes after the connection is established, so I'm wondering if a timeout is occurring due to a heartbeat/keepalive not getting through, the expiration of a token or credential, or something similar(?). Any help would be appreciated, here's a section
from the log that shows one of her drops:
[2014-Jun-22 23:58:44] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-22 23:58:44] RDP (0): client version: 8.0.24875
[2014-Jun-22 23:58:44] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-22 23:58:44] RDP (0): correlation id: 79b9ed3a-2198-784a-8805-0f1d292a0000
[2014-Jun-22 23:58:45] RDP (0): Resolved 'ourserver.oursite.com' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:58:45] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:50] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Jun-22 23:59:53] RDP (0): Exception caught: Exception in file '../../librdp/private/tlsendpoint_openssl.cpp' at line 116
    User Message : TLS1_ALERT_ACCESS_DENIED
[2014-Jun-22 23:59:53] RDP (0): Exception caught: Exception in file '../../librdp/private/tlsendpoint_openssl.cpp' at line 116
    User Message : TLS1_ALERT_ACCESS_DENIED
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-22 23:59:53] RDP (0): correlation id: 79b9ed3a-2198-784a-8805-0f1d292a0000
[2014-Jun-22 23:59:53] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:53] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Jun-22 23:59:54] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Jun-22 23:59:55] RDP (0): Server supports RAIL
[2014-Jun-22 23:59:55] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Jun-23 00:10:54] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 503 RPC Error: c0021012
[2014-Jun-23 00:10:54] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message:
503 RPC Error: c0021012
[2014-Jun-23 00:10:54] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-23 00:10:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-23 00:10:54] RDP (0): ------ END ACTIVE CONNECTION ------

Hi,
Is there any error occur on the RD Gateway server? Please make sure that RPC, RPC Locator and RPC Endpoint Mapper service are running on the server. Also, please make sure that the RD gateway
server does not reach the maximum number of connections.
Thanks.
Jeremy Wu
TechNet Community Support

Procurve - Default Gateway Issue

Help Help Help
2 Weeks on this is still doing my head in, i have a procurve 3800 with multiple vlans and we are looking at testing some new internet filtering that sits inline, so i have created a new interface on my firewall and put the new filter inline.
I have changed the default route on my core to the new firewall ip, and was really looking forward to having a good play.
I have also changed the default gateway to the new interface too, however when i run a traceroute on the core its still going to our old default gateway.
Anyone got any idea what else to check?
This topic first appeared in the Spiceworks Community

Fastvue is pleased to announce the latest product based on the popularFastvueReporterplatform.FastvueReporterforBarracudaWebFiltermakes it easy to generate and shareweb reports that actually show what your employees are doing on theInternet.Our uniqueSite Cleantechnology intelligently rollsbackgroundtraffic such as Content Delivery Networks (CDNs),advertising sites, visitor tracking services, and social sharing widgets, back into thewebsite that was actually visited.If you're runningBarracudaWebFilter(s) in your organization, we'd love to hear what you think.Download the 30 day trialand follow oursimple three stepGetting Started Guide. You'll be up and running in minutes!

DMVPN Default Gateway issue

Hi,
I may be a million miles off but i'm trying to route all traffic at our spoke sites through to our hub site and subsequently through a firewall etc. so I obviously need the gateway to change when a dmvpn is established. I am considering using policy based routing to pickup internal traffic and change the next hop to the hub site. However how will this affect the spoke to spoke routing of the dmvpn? will nhrp take precedence over the PBR to ensure that spoke to spoke communication happens directly?
thanks

Just to follow up, here's a sample configuration of what I'm talking about for the spoke.
ip vrf VRF_LAN
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 2
crypto isakmp key {pre-shared-key} address 0.0.0.0 0.0.0.0 no-xauth
crypto ipsec transform-set IPSec_TS_AES256SHA1ESP_T esp-aes 256 esp-sha-hmac
mode transport
crypto ipsec profile IPSec_Profile_VPN
set transform-set IPSec_TS_AES256SHA1ESP_T
interface Tunnel0
ip vrf forwarding VRF_LAN
ip address 172.31.255.10 255.255.255.0
ip nhrp authentication 31240
ip nhrp map 172.31.255.1 x.x.x.x
ip nhrp map multicast x.x.x.x
ip nhrp network-id 31240
ip nhrp holdtime 600
ip nhrp nhs 172.31.255.1
ip nhrp shortcut
ip nhrp redirect
cdp enable
tunnel source FastEthernet0/1
tunnel mode gre multipoint
tunnel protection ipsec profile IPSec_Profile_VPN
interface FastEthernet0/0
ip vrf forwarding VRF_LAN
ip address 172.31.128.1 255.255.255.0
interface FastEthernet0/1
ip address dhcp
router eigrp 1
passive-interface default
no passive-interface Tunnel0
no auto-summary
address-family ipv4 vrf VRF_LAN
network 172.31.128.1.0 0.0.0.0.0
network 172.31.255.10.0 0.0.0.0.0
no auto-summary
autonomous-system 1
eigrp router-id 172.31.255.10
eigrp stub connected summary
exit-address-family
As you can see, this works almost identically to a standard DMVPN setup, except that the tunnel interface, the LAN (FastEthernet0/0) interface and EIGRP processes all run in the VRF_LAN virtual routing and forwarding instance.
The primary routing table gets its default route from DHCP in this case, though it could just as easily be static. The VRF, on the other hand, gets a default route from the DMVPN hub and shortcut switches for spoke-to-spoke communications. At no point does the default route in the global routing table factor into the DMVPN network's routing table or vice versa, eliminating the need for PBR entirely.

JES4 Gateway issues

Similar Messages

Maybe you are looking for