Jestress Result passed but latency exceeded the threshold

Hi
We have done jestress on our Exchange 2013 new hardware. All the tests are getting passed. Performance & 24 hour stress test getting passed. But on all this passed tests , when I look at the details down i could see I/O
database read average latency exceeded 20ms (30+ ms) and I/O log writes Average   latency exceeded 10 ms (20+ ms) during the test for some of the instances.
As I understand in jetstress doumentation I/O
database read average latency threshold is 20miliseconds and
I/O log writes Average   latency is 10 ms and i think the test supposed to fail if it exceeds that.
I would like to know  how this test getting passed eventohough the latency reported was high as mentioned in below image. Whether this is normal and can I consider my
hardware as passed based on the overall result in this case.
Achieved Transactional I/O per Second
is meeting the requirement
Thanks,
Aboo Arif

Hi,
Please see this:
Disk Performance Testing with JetStress Tool for Exchange Server 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/disk-performance-testing-jetstress-tool-exchange-server-2010.html
Thanks

Similar Messages

Latency apply for Streams Process APPLY_STREAM exceeds the thresholds set

Hi,
Apply process is working, but it shows error in enterprise manager that *"Latency apply for Streams Process APPLY_STREAM exceeds the thresholds set"*
i have changed parallelism to 5 and commit_serialization to FULL. but still error remains.
how to resolve the error?
can any tell me what is the problem in apply process. am i need to change the parameter.
urgent!!!!!!
please

You can tune your apply server by tracing on the apply process. To do this: identify the PID (Process ID)
APPLY SERVER:
select SID from V$STREAMS_APPLY_SERVER;
With above SIDs, query V$PROCESS to get the PIDs:
select a.pid, b.sid
from v$process a, v$session b
where a.addr=b.paddr and b.sid in(the list of sids from above);
With the PIDs found:
$ sqlplus /nolog
connect / as sysdba
oradebug setorapid <PID>
oradebug unlimit
oradebug Event 10046 trace name context forever, level 12
wait for 10-15 mins
oradebug tracefile_name -- gives pathname / filename to file being written to
oradebug Event 10046 trace name context off
run TKPROF on trace file
you may have to add some indexes on your tables . If possible, each table for which changes are applied by an apply process should have a primary key.
read more in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14228/gen_rep.htm
Section Substitute Key Columns
Edited by: user596799 on Apr 17, 2011 8:24 AM

Exception violation exceeds the threshold limit

Hi!
We just upgraded to 5.3 for RAR and CUP. When I try to run the risk analysis in CUP i get this error message "Exception Violation exceeds the threshold limit .... " . I've changed the config in the performance tuning in RAR for Web service violation limit, but it seems like no matter what value I put on I still get that error message (tried 0 and 100000). The system says it saves the config, but as soon as log back in the system the value is gone and therefore the error keeps appearing.
I have full administration rights to the tool so I'm not sure what is going on. I can run the risk analysis just fine in RAR . Yes there are a lot of lines, but in the management report , there are 5 risks .
Thanks for your help
Marcela

Hello
I could also not get the 0 to work, but 2.500.000 did work !
If you check the Debug Trace, you can see something like this:
com.virsa.ae.core.BOException: AusnahmeViolations exceeds the threshold limit:THRESOLD:200000DETAIL:2206989:SUMM:35140:MGMT:61
[EXCEPTION]
Where the number after DETAIL: should be lower than you Threshold
Kristian

One of the BizTalk Server processes in the affected computer is being throttled for significant periods because of high database size exceeding the threshold

Hello Experts,
I have complex Biz Talk 2013 farm having 20 servers,15 Hosts. In my production environment even if there is no traffic i am getting throttling errors from SCOM for my all the production hosts.
Error : One of the BizTalk Server processes in the affected computer is being throttled for significant
periods because of high database size exceeding the threshold
I checked following things:
1. MsgBoxDB size 748732 KB
2. Spool table size 53 MB
3. Tracking DB size 26724 KB
4. Host settings -- Message Queue Size = 100, MsgCount = 50000 , Spool MP = 10 , Tracking MP = 10
5. Ran Message Box viewer and did not found any error related to DB size. (which counter i should focus on in MBV)
Note -- for DB i am sharing full backup size because it does not have log file size.
Please suggest where i should focus?
Is SCOM reporting correctly because everything is fine in biztalk ?
Thanks
Yagya
https://www.mcpvirtualbusinesscard.com/VBCServer/card.aspx?tag=YagyaDattMishra&wa=wsignin1.0

Hi Yagyam
I remember this error from SCOM when you use the standard SCOM BizTalk pack.
Check the eventlog of the server, do you see any errors in event log, this could give some clue to the root cause. Whenever you have this alert from SCOM, you must have
some entries in eventlog relating to the alert raised by SCOM.
Is your message processing by BizTalk hosts are normal? Run the performance monitor to see the bottleneck. Check if there is really throttling.
As mentioned in this blog, check the state of the SQL Agent on BizTalk's SQL database server, may be try restart the SQL Agent on BizTalk's SQL database server.
http://blogs.msdn.com/b/timdel/archive/2008/11/19/why-i-love-scom.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to get files with no checked in version from library that has exceeded the threshold limit

I have exceeded the threshold limit for library, when I click on "Manage files which have no checked in version"
I get error that threshold limit has been exceeded for library, so I am not able to use this option.
Please let me know if there is any workaround or script that can be used to get this done.
or if we can modify the view with some query

Hi niles, Here is a page that details how to retrieve all the files and take ownership of them via powershell to check them in:
http://www.demantprasad.com/2013/05/manage-files-which-have-no-checked-in.html
Mathieu Desmarais http://www.matdesmarais.com/

How does one reduce the size of a photo on iphoto? I want to post images on my website, but they exceed the limit.

How does one reduce the size of a photo on iphoto. I want to post images to my website but they exceed the limits.

Select the photo(s) and export (file menu ==> export) them. You can change the size there setting a maximum pixel dimension and/or reducing quality
LN

Number of times a particular vendor has exceeded the threshold limit

Hello,
We wish to find the number of times a particular vendor invoice has exceeded tolerance limit. Is there any table where this data gets updated or is their any standard report ?
Regards
Jayesh.

Firstly note that you cannot 'exceed' the tolerance. Based on the tolerance, you can goods receipt a higher quantity than specified in the PO.
Check vendor evaluation report ME6H, it provides scores to vendors on quantity reliability. You can use this if you have vendor evaluation configured for your Pur org.
If you are thinking for a Z logic, for each PO line item for the vendor, search in MSEG and total the quantity receipted. If this exceeds the quantity order in the PO item, increase your counter.

SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"

SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"
Office 365 SharePoint Online can be problematic when it comes to exceeding the list item threshold (e.g. 5,000).
Examples of what happens after exceeding the threshold (e.g. 5,000 items):
You can’t create new forms for the list in SharePoint Designer.
You may have challenges with metadata fields in the forms (e.g. adding metadata values, editing metadata values, deleting the metadata column from the list).
Cannot save the list as a template (i.e. you get the threshold error).
Issue I'd like assistance with: how can I create a custom NewForm in SharePoint Designer
when the list exceeds the threshold limit, given this is Office 365 SharePoint Online and I don't have access to increase that limit?
As a control for my testing, I created another list with just a few custom columns with no list items --it worked fine for that list.
I also tried clearing local AppData cache which didn't solve it. I'd need Central Admin on O365 SharePoint Online to increase the threshold which I don't have access
to do. Errors received in SharePoint Designer:
"Could not save the list changes to the server." After getting this, I tried to work around
the create new forms issue by saving a copy of the original NewForm as NewForm2 and got the root error that I suspected was underlying it all:
“Server error: the attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator”.
Any ideas for how to create a new list form in SD?

Thanks Alex.
I just found a couple new workarounds instead of using SharePoint Designer:
Method 1: Add web parts to the form pages on the client side:
Go to the list and execute one of these actions depending what form you want to edit: create a new item (NewForm), edit an item (EditForm), or display an item (DispForm).
With the form you want to edit displayed, go to the gear icon and click "Edit Page".
You should now see the web part page show up with "Add a Web Part" as an option.
Add a Content Editor or Script Editor web part.
Add your custom code to either one to manipulate the HTML objects using your favorite web languages.
Method 2: Use InfoPath 2013.
The InfoPath 2013 route appears to work.

"Budget Exceeded" error not appearing at the time of changing PR but appearing at the time of PO change.

Dear All,
At the time of PR value change after creation of PO budget exceeded error is not appearing even though the PR value exceeds the budget. But at the time of changing the same value in PO, budget exceeded error is appearing.
List of steps:
PR created.
PR released
PO created with reference to PR and released.
PR value changed to a value more than the available budget - No budget exceeded error.
PO value changed in accordance with the PR - System throwing the budget exceeded error.
Now the issue is why the system bypassed the budget exceeded error at the time of PR value change and only giving the error at the time of PO value change. Also, we observed that while changing the quantity in PR which results in exceeding budget, system is giving the error. But while changing the value system is not giving the budget exceeded error.
Your inputs will be highly appreciated. Thanks in advance.

Hello Saurabh,
Thank you for your inputs. Below is the output of CJI5.
Ref,Doc Category Debit Date     Oty       Object    Cost Elem.   Val/CO Area Crcy   Total Qty.     UM
PREQ                  28.05.2014    WBS     XXXXXX    XXXXXX           0.00                         0            EA
POrd                    28.05.2014    WBS                                       14,000.00                1000          EA
From the above output i think system is not capturing the PR commitment. I'm not sure as i'm basically into MM and dont know much about PS.
Why the system is stopping with budget exceeded error at the time of PR creation and not giving any error while changing the PR value after PO creation. System is giving budget exceeded error if quantity is changed in PR. Please explain the standard system behavior and suggest how to enable control at the time of PR value change.
Thanks in advance.

[svn] 2384: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations , but we don't want to introduce this change in a Flex 3.0.x minor release.

Revision: 2384
Author: [email protected]
Date: 2008-07-08 06:23:19 -0700 (Tue, 08 Jul 2008)
Log Message:
The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Erik
Bugs:
SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
Other Bugs Referenced:
ASC-3414 - with block uses local variable instead of object property when -warnings flag on
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3414
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/ASC-3414
Modified Paths:
flex/sdk/branches/3.1.0/lib/asc.jar
flex/sdk/branches/3.1.0/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

[svn] 2383: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations , but we don't want to introduce this change in a Flex 3.0.x minor release.

Revision: 2383
Author: [email protected]
Date: 2008-07-08 06:22:40 -0700 (Tue, 08 Jul 2008)
Log Message:
The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Erik
Bugs:
SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
Other Bugs Referenced:
ASC-3414 - with block uses local variable instead of object property when -warnings flag on
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3414
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/ASC-3414
Modified Paths:
flex/sdk/branches/3.0.3/lib/asc.jar
flex/sdk/branches/3.0.3/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

[svn] 2377: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations , but we don't want to introduce this change in a Flex 3.0.x minor release.

Revision: 2377
Author: [email protected]
Date: 2008-07-07 14:38:01 -0700 (Mon, 07 Jul 2008)
Log Message:
The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Erik
Bugs:
SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
Other Bugs Referenced:
ASC-3414 - with block uses local variable instead of object property when -warnings flag on
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3414
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/SDK-15924
http://bugs.adobe.com/jira/browse/ASC-3414
Modified Paths:
flex/sdk/branches/3.0.x/lib/asc.jar
flex/sdk/branches/3.0.x/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Error: List View Threshold. The number of items in this list exceeds the list view threshold, which is 5000 items.

Hi, i had created a SharePoint List in cloud ( office 365) using List Template.
List template contains 12000 items taken as template from SharePoint on Premise.
I am getting this error message, in SharePoint Online (Office 365)
The number of items in this list exceeds the list view threshold, which is 5000 items. Tasks that cause excessive server load (such as those involving all list items) are currently prohibited.
How to resolve it, to get data in my SharePoint list, any help will be appreciated.

With O365 lists over 5k items are now officially supported but they will have limited behaviour due to the threshold. There are no workarounds or options to increase the threshold either temporarily, for specific users or for the list itself as you have
with on-prem.
You'll need to remove enough items to get it below the threshold limit, add indexed columns to support indexed views, then re-add the items again. This article is for 2010 but the section around indexed columns and views is still accurate:
https://technet.microsoft.com/en-us/library/cc262813(v=office.14).aspx
It may be possible to add the indexes on your on-prem list where you can increase/avoid the threshold, then re-export the list. That would rely upon the list creation script adding indexes before it uploads items but it's a logical assumption.

Edit the result (pass/fail) of a subsequence

I have a sequence that looks like this:
MainSequence
Step1
Step2
SubSequence
DoWhile (Test1 fail and time has not exceed 30 sec)
Test1
End
Step3
The DoWhile loop run Test1 over and over until either Test1 passes or time has exceed 30 seconds. Usually, Test1 actually pass. So, on the steps screen, Test1 would actually be shown as "PASS", but when the SubSequence exits, the SubSequence would be shown as "Failed". I think this is because Test1 failed a few times before passing.
How do I change it so that the SubSequence would be shown as "PASS" in the report as long as Test1 passed once?
Thanks.
Solved!
Go to Solution.

Hi Bladhart,
Maybe this small example
will solve your task,
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
Loop.seq ‏7 KB

I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.

I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.

Hello there Sweebs44,
It sounds like you are tapping the Game Center app to open it, but the screen is blank. I recommend signing out of your account:
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph6c493cac
Then close all the running apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone sign back into your account and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling

Jestress Result passed but latency exceeded the threshold

Similar Messages

Maybe you are looking for