JET datatype encountered error
I'm currently having this issue: Error #2147220502: Unofficial JET datatype encountered. I'm using Migration Workbench 92017 and trying to migrate to a 10g database from Access 2000. Is there a work-around? Or how do we get past this part?
Thanks.
Dianna Gibbs
Min, impossible to tell with this message. Can you dig out what the error.log file says? If this is not clear, you may need to loag a ticket with Support and have them work thru the problem for you.
Barry
Similar Messages
-
D131 Incorrect field datatype encountered
Just received two D131 errors today. Can't recall this ever
happening. A google search isn't returning much help. Any
suggestions for what to do about it?
Thanks,
KenOn Thu, 16 Aug 2012 10:16:03 GMT, laurabuckley
<[email protected]> wrote:
>Where did you see these errors?
The system emailed them to me with an attachment.
Subject: domain.po Error: D131
Error that occurred: D131-Incorrect field datatype encountered
Sender domain: <domain>
Sender post office: <po>
Sender user ID: <user id>
Message passed to server by: <user id>
To requeue, save the last attachment to <post office
path>\WPCSOUT\OFS\0
>Are you running datasynchronizer mobility pack?
yes. v1.2.3 Build 882
Regards,
Ken -
"Error encountered: ERROR: Final installdb run unsuccessful" during firmware cop installation
Hi all,
Just a heads up to anyone else who encounters this error when installing device firmware cop files onto CUCM.
We were upgrading the firmware on our CUCM cluster (small - consists of 1 x Publisher and 1 x Subscriber) - running 8.0.2.40000-1
I was installing:
cmterm-7936-sccp.3-3-21.cop.sgn
cmterm-7937-1-4-4-SCCP.cop.sgn
cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn
cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn
When doing so on the publisher server - it was throwing the following error output (note that the files actually ended up on the TFTP server but devices were not picking up the new firmware):
Installation Status
File cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn
Start Time Thu Mar 06 19:34:24 WST 2014
Status
Error encountered: ERROR: Final installdb run unsuccessful
03/06/2014 19:33:42 file_list.sh|Starting file_list.sh|<LVL::Info>
03/06/2014 19:33:42 file_list.sh|Parse argument method=sftp|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument remote_host=10.133.1.240|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument user_name=ccmadministrator|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|SFTP command complete (0)|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|List file (pre-filtered):|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) RSA|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) UC|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) WIRELESS|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) asa914-k8.bin|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7936-sccp.3-3-21.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7937-1-4-4-SCCP.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|/usr/local/bin/base_scripts/filter.sh file=/var/log/install/downloaded_versions|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|No patch type specified. Optional.|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|No upgrade mode specifed. Optional.|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Current version is 8.0.2.40000-1|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "RSA"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT RSA: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "UC"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT UC: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "WIRELESS"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT WIRELESS: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "asa914-k8.bin"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT asa914-k8.bin: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "cmterm-7936-sccp.3-3-21.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7936-sccp.3-3-21.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|Processing token "cmterm-7937-1-4-4-SCCP.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7937-1-4-4-SCCP.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|Processing token "cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|Processing token "cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|List file (post-filtered):|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) RSA:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) UC:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) WIRELESS:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) asa914-k8.bin:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7936-sccp.3-3-21.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7937-1-4-4-SCCP.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|List file (pre-structured):|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) RSA:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) UC:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) WIRELESS:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) asa914-k8.bin:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7936-sccp.3-3-21.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7937-1-4-4-SCCP.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|List file (post-structured):|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="RSA" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="UC" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="WIRELESS" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="asa914-k8.bin" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7936-sccp.3-3-21.cop.sgn" version="" file="cmterm-7936-sccp.3-3-21.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7937-1-4-4-SCCP.cop.sgn" version="" file="cmterm-7937-1-4-4-SCCP.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn" version="" file="cmterm-7941_7961-sccp.9-3-1SR2-1.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn" version="" file="cmterm-7945_7965-sccp.9-3-1SR2-1.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|success|<LVL::Info>
03/06/2014 19:33:46 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument method=sftp|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument file_name=cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument remote_host=10.133.1.240|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument user_name=ccmadministrator|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Getting patch size via sftp for cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Size of patch file = 6018125|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Total space needs = 12036250|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh| Free space : 126461788160|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Space needed : 24072500|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|success|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
03/06/2014 19:34:19 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument method=sftp|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument file_name=cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument remote_host=10.133.1.240|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument user_name=ccmadministrator|<LVL::Debug>
03/06/2014 19:34:20 upgrade_get_file.sh|Starting SFTP of cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|SFTP command complete (0)|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
03/06/2014 19:34:21 upgrade_get_file.sh|Create md5 "/common/download/cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn.md5"|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|MD5(/common/download/cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn)= e3:02:d3:e1:89:ff:a1:eb:0a:71:52:03:ad:d7:e2:85|<LVL::Debug>
03/06/2014 19:34:21 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|Authenticate file "/common/download/cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn"|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
03/06/2014 19:34:21 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
03/06/2014 19:34:22 upgrade_get_file.sh|success|<LVL::Info>
03/06/2014 19:34:22 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
03/06/2014 19:34:24 Terminating active side processes
03/06/2014 19:34:24 Terminating active side processes done
03/06/2014 19:34:24 Terminating inactive side processes
03/06/2014 19:34:24 Calling /usr/local/bin/base_scripts/sd_killPartitionB_PIDs.sh
03/06/2014 19:34:24 Terminating inactive side processes done
(13953) Thu Mar 6 19:34:30 WST 2014
install option
(13953) Thu Mar 6 19:34:30 WST 2014
Successful untarring of option /common/download//cmterm-7945_7965-sccp.9-3-1SR2-1.cop.
(13953) Thu Mar 6 19:34:36 WST 2014
Publisher: Starting installdb... /bin/su -l informix -s /bin/sh -c "source /usr/local/cm/db/dblenv.bash /usr/local/cm ; source /usr/local/cm/db/informix/local/ids.env ; nice /usr/local/cm/bin/installdb -x /usr/local/cm/db/xml/xml"
disablenotify rc[0]
xml DSN=ccm_super /usr/local/cm/db/xml/xml
installXml rc[1]
enablenotify dsn[DSN=ccm_super]
enablenotify rc[0]
installdb Failure [-x] 1
(13953) Thu Mar 6 19:34:47 WST 2014
ERROR: Final installdb run unsuccessful
I'd read in various places to perform a CLI command "run loadxml" - which we did but it produced the following output:
admin:run loadxml
This command is processor intensive, and may take a few minutes to run.
It should only be run on the publisher.
Some services may require a restart afterwards.
This is a CPU intensive command and will take a considerable amount of time to complete. Do you want to continue (y/n)?
Starting loadxml
disablenotify dsn[DSN=ccm_super]
disablenotify rc[0]
xml DSN=ccm_super /usr/local/cm/db/xml/xml
installXml rc[1]
enablenotify dsn[DSN=ccm_super]
enablenotify rc[0]
installdb Failure [-x] 1
loadxml function complete
Failure essentially.
Note that the installation went ahead without issues on the Subscriber servers after we tried on the publisher. I believe this is due to it only copying the files to the TFTP server and not updating the database.
I also noted that the following features vanished from the CUCM Administration GUI (the menus were there but the pages came up blank):
"Enterprise Paramaters"
"Enterprise Phone Configuration"
"Service Parameters" (after selecting "server" & "service" drop down options, nothing was displayed)
Within individual "Phone Configuration" - the entire "Product Specific Configuration Layout" was missing from all devices.
I was also unable to export the 'Cisco Database Installation Service' logs from RTMT - it threw an error to the status bar at the bottom stating "Collection cancelled for node <publisher> due to the error" (and there was no error info output...joy!).
I called in TAC and Roman Kramarski assisted me via WebEx to full resolution of the issue - thanks Roman
After running "run loadxml"
We ran the following command which showed us (after much wizzing by of entries) the list of log files, the 5th or so last file in the list being the log output from the "run loadxml" output -
The command: "file list activelog /cm/trace/dbl/sdi detail date"
Our file in question happened to be called "installdb20140306-230735.log" (like I said, was about 5th from the bottom of the list)
Next we viewed the file:
"file view activelog /cm/trace/dbl/sdi/installdb20140306-230735.log"
In the file, fairly close to the top, it showed the following error message:
"23:07:35.047 | DOMErrorReporter::fatalError *ERROR* Fatal Error at file /usr/local/cm/db/xml/xml/366X_display_instance-fxo_port_gs.xml, line 56, column 22"
This, along with the output of the run loadxml command, indicated that "/usr/local/cm/db/xml/xml/366X_display_instance-fxo_port_gs.xml" file was corrupted or incomplete.
Roman (TAC) then used the Cisco access to root in order to look at the actual file.
It was incomplete - it ended mid closure of a tag:
"<name>OutputAttenuation</n#"
(Instead of "<name>OutputAttenuation</name>" plus a whole bucketload more output.
Luckily I had a fresh install of the exact same version of CUCM just installed on in a dev environment - so Roman was able to get into that one, TFTP the file out, and then TFTP the new file in.
We moved the old corrupt file into another folder (as we renamed it initially and then ran "run loadxml" which produced the error again) - copied the new complete file into the folder - then "run loadxml" ran successfully.
admin:run loadxml
This command is processor intensive, and may take a few minutes to run.
It should only be run on the publisher.
Some services may require a restart afterwards.
This is a CPU intensive command and will take a considerable amount of time to complete. Do you want to continue (y/n)?
Starting loadxml
disablenotify dsn[DSN=ccm_super]
disablenotify rc[0]
xml DSN=ccm_super /usr/local/cm/db/xml/xml
installXml rc[0]
enablenotify dsn[DSN=ccm_super]
enablenotify rc[0]
installdb Success[-x]
loadxml function complete
NOTE that the running of run loadxml did not take that long and didn't cause any outages to my system.
After we did this - the installations went ahead successfully.
After a restart of the TFTP service on each server - firmware upgrades went ahead successfully.
Basically - you can do the initial troubleshooting of checking logs of run loadxml and then pass that detail to Cisco TAC to get them to use root access to copy a fresh version of the file across.
Hope this helps.Hi Thanks for the information, this help me a lot, I have the same issue but with some differences, because when I search the error on the log file, I saw
08/25/2014 06:14:49.911 installdb| DOMErrorReporter::fatalError *ERROR* Fatal Error at file , line 0, column 0
message: An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=/usr/local/cm/db/xml/xml/ICS77XX_MRP2XX_display_instance-bri.xml|
08/25/2014 06:14:49.911 installdb|<--DOMErrorReporter::fatalError |
When I search the file I couldn´t find it, so I think this could be because I made a booteable ISO from an upgrade from the Cisco Page, so I go to the production server version 6.1.2 and copied the file missing into my lab and run the command "run loadxml" sucessfully, after that everything works great!
Thanks in advance for your time to post this.
Regards! -
First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps. -
Installer Encountered Errors - PLEASE HELP
Hi,
Getting very annoyed - sat at the computer for almost 2 hours.
Have windows Vista and finally it has allowed me access to install iTunes. When I go through the stages to install I get the following message:
+The installer encountered errors before iTunes could be configured. To retry these operations at a later time, please run the installer again.+
I have tried so many times. Windows is up to date and I have looked at the troubleshooting pages and am getting nowhere. I want to play with my new toy and can't. Can anyone help me get this thing installed successfully.
Thank you!See if you can get itunes to install from another Windows user account. That will tell you if the problem is system-wide or user-related.
Then try other steps listed in this article:
http://support.apple.com/kb/HT1926 -
Everytime I try to install the new itunes it come up with the following message: ' The installer encountered errors before itunes could be configured, Errors occured during installation, your system has not been modified. Please run installer again or click exit' I've tried to install it multiple times now and get the same message everytime. I've also tried re installing itunes 10, but when I go to open it it comes up with the message 'The files itunes libray.itl cannot be read because it was created by a newer version of itunes'. Please help.
Hey sjl95,
Thanks for the question. I recommend that you refer to this article if you are running into issues re-installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
The system encountered error before Itunes could be configured
Hi, i can't seem to get Itunes 8 to run. Each time after the installer is launched, it has an error message that says "The system encountered error before Itunes could be configured. Your systems has not been modified. To try this application at a later time, please run the installer again."
I am using windows vista home premium and a iTouch
I am running out of ideas
thanks for your help!me too. except now i can't delete all the programs from my computer to reinstall not happy
-
ITunes 7.3 installer "encountered errors before iTunes could be configured"
I was able to originally install itunes 7.3.1.3 (upgraded from 7.2) and use it with my iphone (activated/synced for 2 weeks with no problems). I had a problem due to a disk full which corruped Outlook.
I cleared substantial disk space, reinstalled Outlook 2003. This seemed to have corrupted the iTunes sync function, so I uninstalled iTunes (using Add/Remove Programs control panel), and have since been trying to reinstall. I am continually getting the "iTunes installer Completed - The installer encountered errors before iTunes could be configured" error message.
I have read many messages and suggestions in these discussions, and already tried the following:
Completely uninstalling iTunes and Quicktime (iTunes no longer shows up in the Add/Remove programs or using the Windows install cleanup utility) follwing all the steps listed in "Removing iTunes, QuickTime, and other software components for Windows XP" http://docs.info.apple.com/article.html?artnum=93698.
Quicktime (version 7.2 Pro) is currently installed. I can cleanly install/remove Quicktime alone with no errors, but not using the combined quicktime/iTunes installer.
I have tried redownloading the itunes installer several times, and even used the Apple Software update download only option and then manually running the itunes.msi file, but still get the same error.
I have tried manually removing all instances of iTunes/iPod/activesync/iphone that I can find in the registry and all the iTunes/iPod folders as the above knowlege base article instructs.
There must still be some other remnant of the old install, because if I try to install iTtunes 7.2, I get an error message that a later version is already installed, but I have not been able to find anything else.
I have even enabled the verbose logging, the error seems to occur in this section of the log:
MSI (c) (00:C8) [11:00:26:796]: Invoking remote custom action. DLL: C:\DOCUME~1\[myusername]\LOCALS~1\Temp\MSI36.tmp, Entrypoint: iTunesLaunchConditions
Action ended 11:00:26: iTunesLaunchConditions. Return value 3.
MSI (c) (00:FC) [11:00:26:859]: Doing action: SetupCompleteError
Any suggestions on what else I can try would be appreciated. One of the main reasons I need sync my ipnone to my work windows machine is to keep my Outlook contacts and calendar. I have no problems with iTunes on my macs.
I am running XP SP2, and have local administrator rights on my Dell 610 notebook.I had to find this solution from another site, so thanks to all the people who viewed this thread & knew how to fix this but didn't bother.
If anyone is weary enough to come to this forum to solve this problem, here is one solution that worked for me & it may work for you if you encounter the error:
"the installer encountered errors before safari could be configured"
1. Use a trustworthy registry cleaner to clean your registry such as Ccleaner or Advanced System Care. This step may not be necessary though.
2. Go to "C:\Users\MyUsername\AppData(Hidden)\Local\Temp" & delete everything in it.
3. If step 2 still doesn't allow you to install Safari, then try:
4. Open Start type "CMD" in the search button, then in the cmd prompt "Regedt32"
5. In the reg editor open:
"Computer" / "HKEYCURRENTUSER" / "Software" / "Apple Computer, Inc." & try deleting the entries for any Apple programs that may be causing any conflicts.
Be aware that any programs that you delete registry entries for may not function correctly afterwards or need to be reinstalled, but this more drastic measure should hopefully allow the installation of Safari browser.
Hope this helps any further visitors to this forum looking to solve this problem it worked for me, good luck.
Message was edited by: RottenestApple -
Installer Encountered Errors before iTunes could be Configured
I keep getting the same Error over and over again:
*iTunes Installer Completed*
The Installer encountered errors before iTunes could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
Click Finish to exit the Installer.I'm using version 8.2 lately and i downgraded to version 7 for some reason.... After i got my new iPhone 3GS yesterday. Which is needed the 8.2 version....So i uninstall the version 7 and re-install the version 8.2 again and i got this message....
*"A NETWROK OCCURED WHILE ATTEMPTING TO READ FROM THE FILE C:\WINDOWS\INSTALLER\BONJOUR.MSI".....*
I try to check this file in my C:\ Drive but unfortunately i can't find it and i can't install the iTunes 8.2..... and the bad thing is i can't f#*******ing use my new iPhone 3GS....
Please help me or otherwise maybe just return it to the shop and get something else instead of this new iPhone 3GS...... too much trouble.... -
New 7.6 iTunes64Setup.exe "The installer encountered errors before iTunes..
I am using Vista 64 bit. Used 64 bit IE to download the proper file
iTunes64Setup.exe
from
http://www.apple.com/itunes/download/
But I get this error when I try to install:
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again.
Click Finish to exit the installer.
I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
c:\Program Files (x86)\iTunes
directory (had only one file in there after uninstall), same problem.
FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
Is this a known issue with 7.6 64 bit? Is there a workaround?
There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
I did notice it still installs in the
C:\Program Files (x86)\iTunes
directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously. -
The installer encountered errors before apple mobile device support could be configured
I'm having issues with installing apple mobile device support. Every time I try to install apple mobile device support I get this annoying message:
the installer encountered errors before apple mobile device support could be configured
I have tried these two ideas with no luck.
Had this issue, and none of the solutions above worked, here is what I did to fix the issue, Install Itunes like you normally would, admin rights ect. When you get the error message "Itunes errors occurred during installation before itunes could be configured" do not click finish, leave that folder up, no navigate to your appdata directory such as example C:\Users\Your Username\appdata\local\temp, inside there look for a file called iTunes64Setup.log or iTunes32Setup1850.log, open that up and scroll down, look for these key things as in example, "Executing: "C:\windows\system32\msiexec.exe" /i "C:\Users\Crusisxx\AppData\Local\Temp\IXP593.TMP\iTunes64.msi" INSTALL_SUPPORT_PACKAGES=1" so I would navigate inside the folder in my temp called "IXP593.TMP, there you will find all the installation packages, copy all of those files and paste either on your desktop or a new folder ect, once done you can now click finish on the failed itunes installer, now whether or not where ever you decided to place your files you copied from that temp folder you will want to run Itunes64.msi or Itunes.msi ect, and run the installer, you should now have successfully of installed Itunes.
Itunes 11.1.1 Errors occurred during installation...
I got it. I just first uninstalled iTunes then this:
1.Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
2.Type cd C:\Windows\SysWOW64
3.Type regsvr32 vbscript.dll (This registers VB Script with your computer.)
4.Now install iTunes as you normally would by double clicking on the install program and wait for iTunes to finish installing.
5.Type regsvr32 /u vbscript.dll (This unregisters VB Script with your computer.)
Re: "This iPod cannot be used because the required software is not installed."
What else can I do and why is it not working?Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
-
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
Encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I've tried upgrade iphone on three computers , the results are all the same.
One of the computers successfully upgrade my ipad to 8.3.
There are 2GB left on IPhone 5S before I perform the upgrade.
It should be enough for iTunes to finish the process, right?
But in the log, it says "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
why is that?
Any way for me to continue the upgrade? it seems it's almost done.
Thank you
the end of the log is as below:
[10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
[10:36:29.0714] entering fixup_var
[10:36:29.0714] entering update_var_directory_hierarchy
[10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
[10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
[10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
[10:36:29.0714] unable to copy directory: 2
[10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
[10:36:29.0714]
[10:36:29.0714] ==== end of device restore output ====
[10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
[10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
[10:36:30.0542] Restore completed, status:6
[10:36:30.0542] Failure Description:
[10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[10:36:30.0542] Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
[10:36:30.0542] Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）Hello there, Kenduck.
It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
Get help with iOS update and restore errors - Apple Support
Particularly:
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
If you still see the error message, check for USB connection issues.
Thanks for reaching out to Apple Support Communities.
Kind Regards,
Pedro. -
How should I proceed?
I'm running Windows 7.Sure! Here it is:
"Installation Failed
Your installation encountered errors.
The error summary file may help you identify the issue.
More troubleshooting tips:
1. Restart your computer.
2. Exit all applications including startup items, virus checking and firewall software.
3. Close this window and launch the installer again to reinstall your application.
If the problems persist, please contact Customer Support for further assistance."
I tried all three of the tips suggested in the troubleshooting.
The error summary file says:
Exit Code: 20
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 0 error(s), 0 warning(s) -
Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.
Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......
Maybe you are looking for
-
Ipod Not Recognized After iTunes 7.0 Upgrade
Hello My 5th generation iPod was synching just fine with iTunes 6.0.5. Then, I upgraded to 7.0 and it's no longer recognized, though Windows sees the device just fine. I followed the troubleshooting steps at article 93716 (http://docs.info.apple.com/
-
I can;t find the appropriate update for this version of garage band. I have seen somewhere someone suggested to find a garage band 4 before going to 4.1.1, otherwise it'll be impossible to upgrade, but I never found a free download for version 4.0.0
-
My photo album has disappeared under the album header and so now I cannot access my photos from my phone. How do I correct this?
-
If I import favorites from IE, does that totally remove them from IE?
If I import favorites from IE, does that totally remove them from IE?
-
Hi Shanky , pls help out regading Profiler Trace issue ?
Hi Shanky, Pls help out . Regadng Profiler Trace . Thanks Vijay